Provision for installation of IOT,EOT along with rising with rising height of compound wall by Janivilli Intake .

Cost of 10 Ton Capacity Double Girder EOT of reputed make including installation at site

ISMB 300 = 12 Mtr @ 64 Kg/Mtr (ii) ISMC 150 = 24 Mtr @ 16.4 Kg/Mtr, (iii) MS Plate, Cleats etc LS

Earth work in all kinds of soil within 50mtr initial lead dismantling brick or stone masonry in lime or cement mortar under 3mtr. height including stacking the useful materials for reuse and removing the debris within 50mtr lead

Cement concrete (1:3:6) using 40 mm size hard granite crusher broken metal including watering and curing including cost, conveyance, royalties and taxes of all materials, labour, T&P etc. complete as per direction by Engineer-in-charge.

Supplying all materials, labour and T&P for providing Cement concrete (1:2:4) with 12mm size hard granite chips including hoisting and laying.

Supplying and laying of 6.0 Sqmm Three Core Flat Copper Armored Cable of reputed make like BCH/Havels/Finolex as per IE rule and specification and direction of Engineer-in-charge.

Supplying fitting and fixing of 100 Amp TP Main Switch of reputed make like MEX as per specification and direction of Engineer-in-Charge.

Dismantling brick or stone masonry in lime or cement mortar under 3 mtr height including stacking the useful materials for reuse and removing the debris within 50 mtr lead.

Brick work with Fly Ash bricks of 23 cm × 11 cm × 8 cm, size having crushing strength not less than 75 Kg/Sqcm, with dimensional tolerance +2%, in cement mortar (1:6) in superstructure.

Supplying all materials, labour & T&P for 12 mm thick cement plaster in cement mortar (1:6) for brick work including curing, scaffolding etc., complete.

Supplying all materials, labour & T&P for 16 mm thick cement plaster in cement mortar (1:6) for brick work including curing, scaffolding etc., complete.

Providing & fixing Concertina Coil fencing with punched tape concertina coil 600 mm dia, 10.0 mtr openable length (total length 90 m), having 50 nos rounds per 6 m length, up to 3 m height of wall with existing angle iron ‘U’ shaped placed 2.40 m apart, with 10 horizontal R.B.T reinforced barbed wire studs tied with GI staples and GI clips to retain including all cost of materials, labour, transportation etc., all complete as per specification and direction of Engineer-in-Charge.

Provision for fixing U-shaped MS angle structure with 50×50×5 mm MS angle for fixing concertina coil fencing at 2.4 mtr apart (0.45×0.6×0.45 m U-size with 0.40 m leg)

Supplying all materials, labour and T&P for providing cement concrete (1:2:4) with 12 mm size hard granite chips including hoisting and laying.

Supply of Pressure transmeter (transducer) to be installed in delivery main with technical specification i.e. Range up to 7 kgf/cm2, Type-Sensor, Power Supply-24 DC, Output 4–20mA, Make: E&H/ABB/VEGA/WIKA.

Supply & installation of SS body diaphragm type Pressure gauge 0–7 kgf/sqcm, 150mm dial with SS snubber, 15mm 3-way SS gauge cock, SS steel stem etc complete.

Supplying all materials, labour, T&P and fixing of Aluminium Glazed Window made with Aluminium Channel section of required sizes per PWD specification with 5mm thick non-transparent glass including cost of locks and fixing at site complete as per specification and direction of Engineer-in-charge.

Supply, fitting, fixing & erection of hot-dip octagonal smart pole for mounting and installation of the LED street light Luminaries as per following technical specifications- (i) Height - 6.0m, (ii) Top dia - 70mm, (iii) Bottom dia - 130mm, (iv) Sheet Thickness- 3mm, (v) Base plate dimension- 200mm×200mm×12mm with required bolts & fittings.

Supplying materials, labour and T&P for carriage of excavated earth from site to a distance 5 km away etc. all complete and as per the specification and directions of Engineer-in-charge.

Supplying cow-dung as manure including transportation etc all complete as per the direction of Engineer-in-charge.

Supplying fertilizer, pesticides to be applied in initial and periodical use as required etc. all complete as per the direction of Engineer-in-charge.

Supplying labour for weeding, mowing, periodical cleaning of Lawn with termite treatment for one month etc. all complete as per direction of Engineer-in-charge. Engagement of U/S labourer 2 unskilled labourers for 1 month.

Supplying all labour T&P for preparing the bed uniformly and planting the garden grass including watering and weeding for a period of one month and application of fertilizer and organic manure etc. all complete.