CERTAIN REPAIRS TO NISSAN HUT AND OTHER MISC WORKS AT COD UNDER AGE B/R (EAST) AT GE DEHU ROAD

Amount

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

M & L for Pre - cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonary with solid blocks built in cement mortar 1:6 all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

M&L for 20mm thk granite stone machine cut (table rubbed and polished) bedded and jointed with grey cement slurry nd pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing rounding to edges of granite stone etc complete all as specified.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insulation 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M & L for ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item No 11 above but on skirtings incl 10 mm th rendering in CM (1:3) complete.

M&L for vitrified ceramic coloured tiles 8 to 10mmthk (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete. complete all as specified and directed.

All as per item No 13 but on skirting over 10 mm th rendering in CM 1:3 complete.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx300x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:3 all as direced.

Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)

M & L 75 mm thk Cement conc type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair .

M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base complete all as specified.

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block (glossy finish) any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.

M& L Chequered Cement Concrete Tiles (glossy finish ) 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete walls finished even and smooth w/o using extra cement.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement.

M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls.

M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls over a coat of primer.

M&l Complete removal of existing treatment of painted surfaces and priming with alkalie resistant priming paint & applying two coats of oil emulsion distemper on wall including preparation complete all as specified & as directed.

M & L complete removal of existing treatment of painted surfaces applying two coats of cement paint complete all as specified and directed.

M&L One coat of synthetic enamel paint on old painted steel surfaces over 10 cm width or girth incl prepration of surfaces complete

M & L for Preparing old decorated plastered or unplastered surfaces of ceiling including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash complete all as specified.

M&L for prepartion of old plastered surface of wall applying one coat of weatherproof acrylic emulsion exteroir grade paint on external surfaces complete all as specified.

Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

Dismantling MS works of any Desc. Not otherwise provided for

S&F Tubular Sections as in main cross beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A)

M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.

S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete.

All as per above above but plain sheet fix in valley gutter / ridge

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

Dismantling of PVC water tank of capacity exc 500 litre and n. exc 1000 litre and complete all as specified and directed.

Dismantling of PVC water tank of capacity exc 250 litre and n. exc 500 litre and complete all as specified and directed.

S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes.

All as per item No 40 but 1000 litres.

Disconnecting existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for refixing complete all as specified and as directed.

Fixing only water tanks of capacity 500 Ltr incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes.

Disconnecting existing PVC water tanks of capacity 1000 litres, setting aside (or lowering if required) for refixing complete all as specified and as directed.

Fixing only water tanks of capacity 1000 Ltr incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame)exc 1.5 sqm but n.exc 4 sqm each and removing to store.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) n'exc 1.5 Sqm each.

S&F Anodised aluminium window and ventilator including frame,(three track) with two shutters with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc fabricated using following aluminium anodised sections conforming to catalogue of JINDAL or equivalent make all as specified and directed by Engr-in-charge. (a) Bottom frame 20620 (b) top frame & vertical - 20621 (C) Handle (side) - 20606 (d) Shutter inter lock -20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352 (Note cost of tinted glass & wire cloth shall be included in the quoted rate of item) Complete all as specified and directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F in repairs 10 mm th toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and directed by Engr-in-Charge

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S/F 30mm thik flush shutter solid core construction with block board core and plywood face panels commercial type on both sides

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm.

Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick.

S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.

S&F 3.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.

S & F of 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F 100 mm aluminium, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified.

Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm.

All as per item No 63 but bore of pipe 20mm

M&L Supplying and laying of 20mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

M&L Supplying and laying of 25mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

S&F in repair stop valves fancy type cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe.

S&F in repairs bib taps cast copper alloy with capstan headsscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe.

S & F in repairs pillar taps fancy type ,chromium plated with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe.

S & F in repairs Brass cromium plated with capstan headsshower rose of 125 mm dia complete all as specified.

S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.)

S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified. (Note : Stainless steel sink to be provided in lieu of ground cemented washing area, hence no credit)

S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm

S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets).

S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce.

S&F in repairs 25mm chromium plated aluminium alloy anodised curtain rails or pipes fixed to brackets complete all as specified and directed.

S&F aluminium anodised brackets for 25mm dia curtain rods complete all as directed.

Supply and fixing for vitreous china european dual type one piece type water closet with flushing cistern of size 780x375x700 mm star white over and including fittings such as s' trap distance pieces 100 mm long etc complete make : Hindware cat part No 92071 or equivalent all as specified and approved Accepting officer.

S & F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F in repairs 10 mm th toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and directed by Engr-in-Charge

S&F in repair stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.

S&F in repair 4.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.

S&F in repairs 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S & F in repairs of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

Petty repairs to joinery works such as easing of doors, windows, kitchen cabinets , refixing builder hardware gauge etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately.)

Petty repairs to Aluminium joinery works such as Aluminium Door, Alumnium Windows, Aluminium Ventilators and like similar works such as easing of doors, refixing of door, windows, refixing builder hardware such as Aluminium beading to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately.)

S&F in repair floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.

Supply and fixing in repairs100 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply and fixing in repairs 150 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply and fixing in repairs100mm long extruded alluminium alloy handle, cast type, anodized all as specified

Supply and fixing in repairs150mm long extruded alluminium alloy handle, cast type, anodized all as specified

Material and labour for Welding in repairs exc 2.5 cm in length , thickness of Metal to be welded exc. 9 mm but not exc. 20 mm complete all as specified and as directed

S & F 10 - 12mm thk polypan PS 20010 Prelam PVC (Hallow profile) sheets used for fixing on wall lining and PVC false ceiling inclusive of necessary fixing at site on PVC frame as per specifications and directed by Engr-in-Charge.

Demolition & breaking up drain pipes (SWG, AC, RCC etc) set in CM int dia of pipe 100mm with all fittings .

All as per item No 96 but 75mm dia pipe with all fittings.

S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 110mm dia pipe

S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 75mm dia pipe

S&F PVC (SWR) bend 110 mm dia all as specified and directed

S&F PVC (SWR) bend 75mm dia all as specified and directed

M&L For plain cement 1:2:4 type B2(usig 40mm graded stone agregate)as in Cement concrete in surface channels and drains complete all as specified.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc.

M & L in repairs 18 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cup board shutters, partitions, shelves and similar work. Complete all as specified and directed.

S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. complete all as specified and directed.

S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

Providing and carrying out water Proofing treatment to toilet, sunkan slabs, wet areas,roof ets, after proper surface prepration, carry out cementitious injection grouting at leakage point using cebex 100 plasticised expanding grounding admixture, application of polymer modified at slab wall junction using Nitoband SBR latex screen modifier cum bonding agent and application of two coat of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc, , repairs toapproved App roof membrane 3.5Kg/Sqm with bituminous meber @ 100 gm/Sqm as per manufacturers instrcutions complete including 15mm thick cement plaster in CM 1:4 all tools and plant as per manufacturers specification including removal & refixing of fixtures complete all as specified and directed.

M&L cement concrete type E-2 1:5:10 using 40mm, graded brick agg as in sub base.

M&L PVC (SWR) floor trap with grating including jointing with solvent cement 75mm bore dia

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces over roof slabs with admixture of integral water proofing compound @ 3% by weight of cement (WPC shall be measured & paid seperately)

Supply only integral water proofing compound

M&L for PCC type B-1, (1:2:4, using 20mm graded stone aggregate) as in sunken floor incl water proofing liquid @ 200ml per 50Kg cement. (water proofing liquid to be measured separately) finished even and smooth. Complete all as specified and directed.

M/S B.A. GAIKWAD (BID ID -3327008)

M/S RENUKA CONSTRUCTIONS (BID ID -3328212)

RAMESH PATIL (BID ID -3328340)

Star Construction (BID ID -3327752)

Santhi Enterprises (BID ID -3327063)

DR J S CHADHA AND SONS (BID ID -3327357)

Shri Sant Cosntruction (BID ID -3328160)

KARPE AND SONS CONSTRUCTION (BID ID -3328263)