KCMC-15th CFC fund 2022-23,2023-24, 2024-25 Tied Grant Balance Fund

Amount

Supply and delivery of floor mounted type FCMA Air/ Oil Cooled soft starter suitable for the LT motor offered for operation in AC three Phase 50Hz (+/- 5%), 415V(+/-10%) including line contactors suitable for next standard higher KW rating, Over load relay, instrument panel with frequency meter, Ammeter, Voltmeter, indicating lamp 6Nos, LED ON/OFF type and Start /Stop push button.

Supply and delivery of l.t. Cables 3.5,core 1.1 kv grade armoured aluminium conductor cross linked poly ethylene insulated pvc sheathed cables conforming to is 7098 (part i)/1988 and as amended thereafter with isi marking as directed by the department officers.

3.5 core x 150sq.mm

3.5 core x 95 sq.mm

Supply and delivery 16 sq.mm of Pvc Insulated Single Core Multi Strand Fire Retardant Flexible Copper Cable With Isi Mark Conforming To Is as directed by the department officers.

provinding Cable Laying below GL including earth work as directed by the department officers.

Supply and delivery of Cable Glands as directed by the department officers.

Cable gland suitable for 3½ core 95 sq.mm UG cable

Cable gland suitable for 3½ core 150 sq.mm UG cable

Supply and delivery of Crimping Copper Lugs Suitable For The Following Sizes as directed by the department officers.

Supply and delivery of M.s. Pipes- spiral/longitudidnal welding as per is 3589/2001 with internal lining and external coating made with fe410

Lowering of M.S pipes and specials into the trenches and laying to proper grade and alignment and as directed by the department officers.

150 mm dia

Supply and Delivery of MS specials as per IS 7322-1985 without inside lining and outside coating.

Supply of MS spiral welded saw pipes - mm OD x mm WR confriming to I.S 3589/2001 made with H.R coll conforming to l.a 2026 Ro 410 grade in double random length with bevelled / plain ends .

150 mm dia

Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O- Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 14846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16

150 mm dia

Manufacture, Supply and Delivery 150 mm dia of DI D/F Slanted seat Swing Check Valve. Body of ductile cast iron of Grade GGG 40 or equivalent grade and disc of ductile cast iron GGG 40 or equivalent grade with fully encapsulated EPDM rubber, where both faces can be used. Electrostatic epoxy powder/liquid coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270. (EP-P) it is a resi-coat powder approved for drinking water application, applied through fusion bonding process by dipping the shot-blasted casted components heated up to 200 deg C). Face to face dimensions as per EN5 58-1, series 48 and flange connections as per EN 1092-2/IS 1538 non retrun valve

Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS?638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete

150 mm dia

Supply and delivery of 20mm dia and above x 90mm to 120mm length fully threaded bolts and with nuts as directed by the department officers.

Supply and delivery of 3 Ply R.I. Sheet as directed by the department officers.

Dismantling the RCC wall inculding clearing away from site etc., complete

Supply and delivery of 2000 LPMx80M Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation.

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Supply and fixing of Bore well supporting clamp as directed by the department officers.

Manufacturing and Supply of Metal Junction Box. Size: L400 x H800 x D225mm. with 32x6mm Copper Flat as directed by the departmental officers .

Supply and delivery of 350 mm dia ms pipe with clamp arrangement including cost of bolt & nut, welding charges and painting of anticorrosive inclusive all taxes etc., complete

Supply and Erection of dust and vermin proof cubical panel board made up of 16 SWG CRCA sheet steel with supply and fixing of the following interior mounting fuse switch with HRC fuses arrangement with bus bar chamber, switch chamber & cable alloy conforming to IE rules EB INCOMER 315A TPN Main Switch With HRC Fuse Unit-1No.OUTGOING:1) 200A TPN Main Switch With HRC Fuse Unit - 3No's With Suitable size of Bus Bar with necessar masanry work etc complete., as directed by the departmental officers

Supply and delivery of 25 KVAR Automatic Power Factor Capacitor Panel as directed by the departmental officers

Supply and delivery of 400A 3 Pole MCCB as directed by the departmental officers

Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: H-GURU / ISI MAKE / EQUIVALENT.

Supply and Delivery of MS specials as per IS 7322-1985 without inside lining and outside coating.

M LOGANATHAN (BID ID -1256602)