Electrification Work to the Toilet Block, Canteen, Dormitory Building, Shops and Clinic in Truck Terminal near KK gate at NMPA

Supplying of 1.1 KV LT Aluminium UG cable XLPE insulated, PVC extruded inner sheath armoured UG LT cable as per IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms as per IS-3975. (3.5 Core X 120 Sq mm)

Supplying of 1.1 KV LT Aluminium UG cable XLPE insulated, PVC extruded inner sheath armoured UG LT cable as per IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms as per IS-3975. (3.5 X 95 Sq mm)

Supplying of 1.1 KV LT Aluminium UG cable XLPE insulated, PVC extruded inner sheath armoured UG LT cable as per IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms as per IS-3975. ( 3.5 Core X 70 Sq mm )

Labour charges for laying of 1.1 KV class XLPE LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/on concrete wall as required. (3.5 Core X 120 Sq mm)

Labour charges for laying of 1.1 KV class XLPE LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/on concrete wall as required. (3.5 X 95 Sq mm)

Labour charges for laying of 1.1 KV class XLPE LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/on concrete wall as required. ( 3.5 Core X 70 Sq mm )

Supplying and making end termination with glands, lugs of LT cable. (3.5 Core X 120 Sq mm)

Supplying and making end termination with glands, lugs of LT cable. (3.5 Core X 95 Sq mm)

Supplying and making end termination with glands, lugs of LT cable. (3.5 Core X 70 Sq mm)

Supplying and laying Double walled corrugated DWC HDPE pipe as per IS 14930 part II with necessary connecting sockets, couplings, Tees, bends, End - caps of same materials in existing trench/duct/pole/on wall/on black stone wall with SS saddles with necessary clamps, screws etc. complete as required for drawing the cable. (110 mm OD and 95 mm ID)

Supplying and laying Double walled corrugated DWC HDPE pipe as per IS 14930 part II with necessary connecting sockets, couplings, Tees, bends, End - caps of same materials in existing trench/duct/pole/on wall/on black stone wall with SS saddles with necessary clamps, screws etc. complete as required for drawing the cable. (90 mm OD and 76 mm ID)

Supplying and fixing of 100 mm dia class B, GI pipe for drain and railway crossing.

Supply and Wiring for lighting/ power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments. (1.5 Sq mm)

Supply and Wiring for lighting/ power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments. (2.5 Sq mm)

Supply and Wiring for lighting/ power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments. (6.0 Sq mm)

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ( 2 Way )

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ( 3 Way )

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ( 4 Way )

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ( 6 Way )

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ( 8 Way )

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ( 12 Way )

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC Box. (2 Modules)

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC Box. (3 Modules)

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC Box. (4 Modules)

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC Box. (6 Modules)

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC Box. (8 Modules)

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC Box. (12 Modules)

Supplying and fixing of modular switch and connected accessories on existing modular switch plates as per IS 3854 and IS 1293. ( 6 A Switch )

Supplying and fixing of modular switch and connected accessories on existing modular switch plates as per IS 3854 and IS 1293. ( 6 A 3 Way socket )

Supplying and fixing of modular switch and connected accessories on existing modular switch plates as per IS 3854 and IS 1293. ( 16 A Switch )

Supplying and fixing of modular switch and connected accessories on existing modular switch plates as per IS 3854 and IS 1293. ( 6 / 16 A 3 Way Socket )

Supplying and fixing of modular switch and connected accessories on existing modular switch plates as per IS 3854 and IS 1293. ( Stepped Fan regulator 2 modules )

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due grrove cutting, finishing with necessary cement plastering complete. 4" x 4" x 3" (101 x 101 x 76 mm)

"Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans)." a) 48” Sweep (1200mm) Regular model.

Fixing 48” Sweep (1200mm) Regular model Ceiling Fan (BLDC) of all capacities and all types to the existing ‘S’ hook with fan regulator to the existing board together with supplying and fixing 5A ceiling rose, with necessary length of 23/.00076 inch PVC insulated twin twisted copper wire and wiring.

Supplying of exhaust fan of 1440 RPM of 300 mm (12” sweep) size with bracket blades complete for light duty suitable to operate on 230V, 50Hz, AC Supply.

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5A ceiling rose with sufficient length of 23/.00076 inch PVC insulated twin core wire.

Supplying PVC flexible conduit pipe fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and NF screws and on either end of the pipe terminated completely. 32 mm

Supplying heavy gauge PVC Conduit Pipe confirming to IS 2509 with suitable size bends, metal junction boxes adhesive paste etc. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC and enclosures. 25mm dia 2mm thick.

"Supply, installation, testing, commissioning of UV Potable water cooler with inbuilt purification system (sediment filter, Activated carbon filter and UV+ UF filtration with 0.001 micron including supply of external pre filter set of size 20’’.) and inbuilt 25 Ltr Storage confirming to IS 14724. Provision for Cold, Hot and Normal water dispenser. Water Storage Tank with PUF thermal insulation, floor mounting, Storage Tank and Outer body material made of SS304 with required accessories as a complete job. "

Supply and fixing of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 5000 hr @ Lumen Maintenance of 70%, maximum light intensity shold be between 60 degree to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete liminaire > IK08. Power factor > 0.9 with mains, Surge Protection - Min 5 KV along with Over voltage/Overload, short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40 mm to 50 mm. Universal volatge driver to operate wide voltage range from 100V to 270V 50/6t0 HZ application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the site location with minimized minimal tools. LED Light fixture with 25 W diated system power consumption. LED Efficiency>1301m/w, nominal CRI > 75. luminiare manufacturer should have in-house facility accredited by NABL/CPRI & any government certified agency & Design & Develpopment facility certified by ISO 9001:20008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part. Warranty of 2 years against any manufacturing defect under standard electrical conditions as mentioned should be given by manufacturer. LED street light 25 Watt

Supply and fixing of Hot dip Galvanized M.S. Bracket suitable for outdoor luminaries and mounted on octagonal pole using necessary bolts, nuts etc. Complete. Single arm bracket with 1000mm standard 40/50mm dia.

Supply of 2/4 feet PVC Batten with integrated LED tube with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI>80.Power input: 220-240V @50/60hz & Power factor >0.9 along with CE approved. 2 years warranty against any manufacturing defect working under standard electrical condition. a) LED light fitting 1 x 4’-20/ 22 W.

Supply of 2/4 feet PVC Batten with integrated LED tube with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI>80.Power input: 220-240V @50/60hz & Power factor >0.9 along with CE approved. 2 years warranty against any manufacturing defect working under standard electrical condition. b) LED light fitting 1 x 2’-9/ 10 W.

Fixing all types and all capacities of fluorescent/false ceiling LED fittings indoor on the wall/ceiling using 23/0.0076” twin twisted PVC insulated wires, using ceiling rose, required nos of round blocks and c1A. a) On wall/Ceiling.

Installation, Testing and Commissioning of Floor mounting Outdoor LT Control Panel board with MS stand made of angular frame size 2.2mtrs Length x 0.6metrs width made of 50mmx50mm, 6mm thickness with suitable angular legs size including civil work as complete job.

Installation, Testing and Commissioning of Wall mounting Outdoor LT Control Panel board with MS stand made of angular frame size 1000mm Length x 350mmWidth made of 50mmx50mm, 6mm thickness with suitable angular legs size including civil work as complete job.

Supply and fixing of regular MCB distribution board on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB’s Single/Three phase double door with powder coated painting. Made out of 14 SWG MS enclosure. a) Double Door 8 way SP & N.

Supply and fixing of regular MCB distribution board on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB’s Single/Three phase double door with powder coated painting. Made out of 14 SWG MS enclosure. b) Double Door 12 way SP & N.

Supply and fixing of regular MCB distribution board on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB’s Single/Three phase double door with powder coated painting. Made out of 14 SWG MS enclosure. c) Double Door 16 way SP & N.

Supply and fixing of regular MCB distribution board on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB’s Single/Three phase double door with powder coated painting. Made out of 14 SWG MS enclosure. d) Double Door 12 way TP & N.

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and “C” type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. a) 63A TPN

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and “C” type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. b) 40A TPN

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and “C” type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. c) 32A TPN

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and “C” type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. d) 32A DP

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and “C” type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. e) 16A SP

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and “C” type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. f) 10A SP

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and “C” type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. g) 6A SP

Supplying and running of Copper Strips for grounding connections, using necessary fixing materials as required. a) 25x6mm Copper strip.

Supply and fixing of Metal Socket set of 2 pole and earth plugs and socket for incorporating SP / TP MCB (without MCB). The entire plug and socket shall be mounted in a thermoplastic/ powder coated metal box & wired completely. a) 32 Amps- TP & N.

Supply and fixing of Metal Socket set of 2 pole and earth plugs and socket for incorporating SP / TP MCB (without MCB). The entire plug and socket shall be mounted in a thermoplastic/ powder coated metal box & wired completely. b) 20 Amps- SP & N.

Supply and fixing of Metal Socket set of 2 pole and earth plugs and socket for incorporating SP / TP MCB (without MCB). The entire plug and socket shall be mounted in a thermoplastic/ powder coated metal box & wired completely. c) 16 Amps- SP & N.

Supplying and fixing of DP 2 Way enclosure box flush mounting with provision for fixing suitable type capacity MCB’s DP with powder coated painting.

Supplying, fixing and wiring earth electrode for panel and street lights using 40 mm dia, 2.90 mm thick GI pipe 2.5 Mtr long with funnel with mesh and suitable size reducer fixed on the top of the Electrode. The funnel should be enclosed in a CC chamber of 400x400x400 mm with cast iron cover. The electrode shall have staggered holes of 12mm dia and the electrode covered 150mm alround with alternate layers of salt and char coal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.

Supplying and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of materials, labour, curing HOM complete as per specifications. No. KSRB 1000/2300. a) 300mm dia

Digging of trench of 1 meter deep x 0.5 meter wide, refilling the trench to the required ground level and consolidating etc., complete job.

Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 CMT and fine aggregates @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. Thick, well compacted, for coping including cost of all materials, labour, HOM, curing complete as per specifications. No.KBS 4.1,4.2

Supply and Installation of Cable Route Marker made up of RCC block of size 100cm (H) X 50cm (W) X 6cm (D) indicating Embossed text as NMPA LT Cable with Yellow paint and Red colour letters are fixing with cement concrete.

M/s Anugraha power services

J C Electricals

ashirwad enginners

M/s. Precision Electrical Works