GENERAL- Dam safety - Kanhirappuzha dam- Supply and installation of new automated gallery pump and maintenance to thampan sluice of Kanhirappuzha dam in Palakkad district -General Mechanical Work

Amount

Supply and Installation of 10HP Pumps ( 2 Nos) for Gallery Sump

OD13490/2023-2024:Supply of 10HP Submersible pump Set with the following Specifications Motor Power : 10HP , Power Rating : 7.5 KW , Head Range : Minimum 40 Mtr , Discharge Min : 16 Lts/s, Speed : 2880rpm, Size : As per Model and Company Specification, Phase 3, Body Material : Cast Iron , Mounting Type : Horizontal Type , Impeller Matreial : Cast Iron , Shaft Material : Stainless Steel.

OD13501/2023-2024:Supply of Automatic Water level Controller including all accessories and Conveyance etc Complete.

OD13523/2023-2024:Supply of submersible pump Controller of 10HP Pump with Star delta Control Panel with single phase preventor Protection

OD23888/2023-2024:Supply of 3 to 4 Inch PVC Suction Hose Pipes

OD13575/2023-2024:Supply of 2.5 Sqmm 3 Core Copper Submersible Flat Cable

OD13553/2023-2024:Supply of SS BOLT and NUT up to 300mm Length including cost of conveyance.

OD24254/2023-2024:Conveying the 10HP submersible pump set to the bottom sump of the inspection gallery through the steps of inspection gallery, installing new flexible pipes, connecting suction line,delivery line and electric supply line with out causing any damages to the existing lines and pump set and conducting trial run as per the direction of departmental officer at site.

Repair and Maintenance of sluice shutter with hoisting arrangements of Thampan Canal and providing a trash rack in Kanjirappuzha Dam

OD23718/2023-2024:REMOVING OF WASTE , Mud , Debris, Etc by manual means, including loading, transporting, unloading to dumping area or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

OD24259/2023-2024:Dismantling, lifting, leading and stacking of Shutter, screw rod and stool,skin plate & gear set assembly for painting including cost of materials, labour, hire charges and conveyance etc complete.

OD23722/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD23723/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD23727/2023-2024:Supply of MS round bar including cost of conveyance charges

OD33301/2023-2024:Fabrication and errection of Embedded parts for canal shutters ( lJp to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl fficer at site including cost of labour,machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

OD23720/2023-2024:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD33303/2023-2024:Fabrication,Supply,Erection and Assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track,seal track,Seal seat etc as per approved specifications,drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing,welding,shearing,grinding etc,lead and lift,conveyance,incidental and handling etc complete

OD23887/2023-2024:Re-Conditioning of existing EN-8 Screw rod including cost of all materials, labour charges, hire charges, energy charges, conveyance, all leads and lifts etc. complete.

OD23716/2023-2024:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE

OD23719/2023-2024:Hire Charges of diesel generator set at site (Maintenance of Canal Shutters)

OD24271/2023-2024:DISMANTLING & STACKING the EXISTING ALL KIND of RUBBER SEAL for SLUICE GATE or EMERGENCY GATE.

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

OD23717/2023-2024:OVERHAULING OF EXISTING WORM AND PINION including cost of replacement of locking arrangement and mechanical stopper and all materials, labour, hire charges, energy charges, conveyance and all leads and lifts for CANAL SHUTTER.

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD24267/2023-2024:Cost of painting with 2 coats of aluminium paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site.

OD23721/2023-2024:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform including hand rails , lader etc. for the same including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied..

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

5.6:Reinforced cement concrete work in chimneys, shafts, up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand(Zone III) : 3 graded stone aggregate 20 mm nominal size)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

OD24272/2023-2024:Supply and pasting of printed sticker on board including cost of materials, pasting charges etc. complete.

OD24268/2023-2024:Providing screw rod locking arrangement to the shutters including cost of materials ,fixing charges etc complete

OD24269/2023-2024:SUPPLYING and STACKING of PAD LOCK.

V M Asharaf

Bidder Name

Kinanath V P

V M Asharaf