Fire System Automation at MLCP-Automation of firefighting system by modifying the existing fire pump panel and addition of electrical accessories

90.14.1.1 Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

90.14.3.1 Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.5 Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6 Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 Supply and providing copper earth bus in the panel board

90.14.2.2 Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

OD222078/2025-2026 Providing and fixing following capacity open execution tye FN (TPN) dis connector fuse switch unit inside the existing panel board with 315A ISI marked DIN fuse links including drilling holes in cubicle panel, making connections, etc. as required. 400 Amp TP & N SDF

OD222178/2025-2026 Providing and fixing following capacity TP&N inside the existing panel board including drilling holes in cubicle panel, making connections, etc. as required.125A TPN Isolator

OD222179/2025-2026 Providing and fixing following capacity TP&N inside the existing panel board including drilling holes in cubicle panel, making connections, etc. as required. 400A TPN Isolator