Construction of wrestling court at Sports complex Lamba Nall Durpur Distt. Kangra (HP). (SH- Providing E.I. work thereof)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box, Fan Box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group C.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1/2 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.(i) 2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

2x10 Sq. mm.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. (i) S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

TV. Socket outlet, modular.

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-(i) 2 modules (78mmx78mmx50mm)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-(i) Single pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-(i) Double pole. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) 63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-(i) Double door-16 way

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for pipe earth electrode complete as required.

Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-(i)Armoured cable 6 sq. mm (twin core)

Armoured cable 10 sq. mm (twin core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-(i) Armoured cable 6 sq. mm (twin core)

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) or up to required length with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- Model to be got approved from engineer in charge.(i) Ceiling Fan 1200 mm sweep, Category-A

Ceiling Fan 1400 mm sweep, Category-A

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, including shutter in heavy duty fan, connections, testing and commissioning etc. as required:- (i) Exhaust Fan, Light duty, (Domestic) 300 mm sweep/vent air fan

Exhaust Fan, Heavy duty, 300 mm sweep

Supplying and fixing of fancy wall bracket containing lamp holder (s) of all sizes and shapes, complete with all accessories but in/c led lamp including making connections, testing etc. as required of Bajaj/Havells/Decon .(i) Mirror light 610 mm, double lamp.(Category-A)

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

P/F 400mm wall fan (400mm pletina) of Havells / Bajaj/Usha/Crompton complete in all respect as approved by Engineer-in-Charge

Providing & fixing LED Batten integrated LED channel aluminum heat sink body of Bajaj make having Bajaj/ Havells / Philips make as below:Batten/LED integrated channel fitting 20W

Providing & fixing surface/ recess mounted 12/ 15W LED fitting/panel of Syska/Havells/Philips/ Bajaj make as required complete in all respectas approved by Engineer -in -Charge(i) 9Watt

(ii) 15watt

Supplying & fixing SKYLUKS LED surface mounting fitting 1' x 1' LED panel/ luminaire of Bajaj/Havells/Philips/Syska 24/30WH WH

Providing and fixing LED flood light 100 watt White JetaIris/Sturdy neo of Bajaj/Havell/Crompton/Twinkleas approved by the Engineer -in Charge

Providing & fixing LED street light fitting ln white colour with pressure die- cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection. As per CAT no. BRTFG 60W LED/W/W(Warm White ) complete in all respect.The fitting is to be fixed on existing bracket mounted on pole/on wall including wiring etcas required as approved and directed by engineer in charge of Bajaj/ Philips/ Havells make.

P/F 5 mtr OctagnolPole dip galvinisedsingle dip to average65 micron DFT and designed for wind speed of 169 KM/hour Bajajmake Pole Top dia 70mm bottom dia 130mmand thickness3mm with foundation bolt single arm bracket complete in all respect of Bajaj make asper product codeBOP-5030or make in/c MCB. connector and connection from connector to fittings approved by Enginer-in -Charge.

Sourab Kuthiala