Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.0 LAccepted-AOC | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹25.7 L+₹44,175 (1.75%)Rejected-Finance | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹25.8 L+₹52,586.30 (2.08%)Rejected-Finance | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹26.1 L+₹79,817 (3.16%)Rejected-Finance MUKALATH VALAYANCHIRANGARA PO PERUMBAVOOR ERNAKULAM KOCHI 683556 | PERUMBAVOOR | ERNAKULAM | KERALA | 683556 | L4 | Rejected-Finance Other than lowest tenderer | |
| 5 | L5₹26.2 L+₹94,112.80 (3.72%)Rejected-Finance NO 354 2ND CROSS VARADARAJNAGAR VIDYARANYAPURA POST BANGALORE 5600 097 | 5600097 | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
3 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE FORT KOCHI
GE FORT KOCHI PIN 682001
SPL REPAIR TO QUARTER DECK AND FLAG MAST AT INS DRONACHARYA
2022_MES_558173_1
8872/E8/GE_FORT_KOCHI
Open Tender
Civil Works
Item Rate
120 days
INS DRONACHARYA
as per tender documents
8 documents required · 8 mandatory
₹500
GE FORT KOCHI
₹48,000
Yes
3 Dec 2022
17 Oct 2022
5 Nov 2022
17 Oct 2022
3 Nov 2022
27 Oct 2022
Amount
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar .etc complete all as specified & directed.
M&L for pre-cast cement concrete block masonry with solid blocks,type B-1 (1:2:4) using 20mm graded aggregate exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified
M&L for rendering cement plaster in CM 1:4, 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified.
M&L PCC 100 mm thick, 1:4:8 (Type D2) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
Material and labour for 100mm thick PCC 1:2:4( type B-1) using 20mm graded crushed stone aggregate above sub base finished fair and even including necessary form work complete all as specified and directed.
Material and labour for ornamental/decorative type Granite (superior quality black galaxy type) tiles 17-20 mm thick machine cut, bedded and jointed with grey cement slurry including 20 mm thick screed in CM (1:6) and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.
S&F stainless steel grills, railings fixed to walls/floors of Grade-316 including all pieces, drilling holes, sweling, buffing, complete all as specified and as directed.
M&L for moorum/red bajri filling in floors or pavings,laid in layers n.exc 15 cm thick spread,levelled and rammed including watering complete all as specified.
Manufacturing ,Supplying, Erection, Installation of 20 Mtrs long 20 side polygon Flag mast with 2 telescopic sections having,thickness as per BSEN 10025 grade S 355 JO/ASTM A 572-50, bottom dia 540mm top dia 200 MM steel sheet plate for shaft suitable to withstand a wind velocity of 62.5M/Sec as per lS - 875 Part - 3. Base plate as per IS 2062/ASTMA572-50. The mast shall be Galvanised in single Hot-dip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS 2629 with 3 coat of PU(Auto) paint over a coat of primer, and welded as per BS 5135 Single L-Seam joint. The mast shall have double drum winch 750 KG with 2 way head frame with die cast LM 6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press fitted with separate guides for 2 runs of 8mm dia and 6mm dia stainless steel wire rope of AISI 304 grade 7/19 core, (Factor of Safety as per TR No-7).The bottom shaft of mast with door having locking arrangements. The mast shall be erected on existing RCC footing. The mast shall be supplied with 4mm thick template, suitable size J Bolts of 10 Nos. Provision of 50MM dia cross bar size as required with manual hosting system with 6 Nos. Flag Rolls pulleys including rope and step ladder system complete. Also including the Dismantling old mast work, PCC work, strengthening of existing nut bolt system for New Flag Mast, including erection and installation of New Flag Mast at Site and Site clearance work complete all as specified and as directed.
Supply, laying, testing & commissioning LT UG cable XLPE insulated sheathed and armoured, with aluminium stranded conductor, LT 1100 Volts grade of size 25 sqmm 3.5 core including taking down/out old cable complete all as specified and directed by Engineer-in-Charge. Note: Earth work, sand and brick protection will be measured and paid under relevant items.
Excavation in trenches for under ground cable n. exc 1.5 m wide and n. exc 1.5 m in depth and getting out in soft and loose soil including forming bottom surfaces to required level complete all as specified & directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified & directed.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.
M&L for sand cushioning to under ground cable in layers ( 8 cm before laying the cable and 15 cm after laying the cable) in trenches for cable protection complete all as specified & directed. (Note :- For the purpose of payment, only punned thickness will be measured)
Supply and laying burnt sub class B bricks as in cable protection, laid dry across in trenches complete all as specified and directed.
S & F for GI pipe light grade 80 mm dia laid in trenches for cable protection under road including taking down/out old GI pipe complete all as specified and directed by Engineer-in-Charge.
M&L for cutting/dismantling of bitumen road/RCC floor etc for laying / passing under ground cables up to 30cm depth complete all as specified and as directed.
M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate 100mm thick in cut/dismantled portion of road and making good after laying/passing the cables complete all as specified & directed.
Supply and fix GLS type aviation light system 10 watt, 302 LED, 240 volts incl provision of necessary electric connection with 2 core 4.0 sqmm cable from bottom of the flag post to light complete all as specified and as directed.
Supply and fix stainless steel wire rope of AISI 304 grade 7/19 core,(factor of safety as per TR No-7) 2.5mm EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangements. The mast shall have manual and power tool (suitable reversible geared motor 2HP operating on 415 Volts) double drum winch with mounting arm, pully assembly 750 kg with 2 way head frame with die cast LM 6 pulleys, complete all as specified and as directed.
M &L for lightning arrester including air termination rod of 1.2 mtr long and copper strip of size 25x3mm from ground level to air termination rod complete with all fixing arrangements all as specified and as directed.
M & L for earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Meter deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of G I or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and MS cover connecting lead wire from test point to FPB complete all as specified & as directed
S &F Oudoor type feeder pillar box housing in sheet metal enclosure of MS sheet 3.0 mm thick and angle iron 40x40x6mm frame including copper bus bar of 63 Amps mounted on porcelin insulators including arrangement for cable gland for incoming and outgoing cables, locking arrangement, suitable foundation/platform for mounting the FPB with space for and including the following switch gears:- Incomer:- (a) MCCB FP 40 Amp,16Ka, 415 volts - 01 No Out Going :- (a) MCB TPN 20 Amp 415 volts - 01 No (b) MCB SP 6-32 Amp 230 volts - 02 Nos (c) Led Indicator lamp - 03 Nos (d) Digital volt meter - 01 No (e) Digital Ammeter - 01 No
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .