Construction of Vehicle shed for accommodating of Bus to Hot lines / Trichy division

Amount

Clearing juliflora jungle with uprooting including all labour lead lift etc., complete.

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in hard stiff clay stiff black cotton hard red earth, shales.murram, gravel stoney earth,earth mixed with small size boulders.

Supplying and filling of M sand in foundation and basement with well watering and consolidation as per specn. including cost of all materials labour, lead, lift, etc., complete. (As instructed by the Engineer at site)

PCC 1:3:6 mix using 40mm HBS machine crushed metal for foundation including cost of all labour, materials, lead, lift, curing, etc., complete.

PCC 1:1.5:3 using 12 to 20mm(machine crushed) metal for column concrete without formwork including cost of all materials, lead, lift, etc., complete. (As instructed by the Engineer at site)

RCC 1:1.5:3 using 12 to 20mm(machine crushed) metal for raft concrete without formwork including cost of all materials, lead, lift, etc., complete. (As instructed by the Engineer at site)

RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal with centering, shuttering, form work including cost of all material, lead, lift,etc, complete, but excluding cost of steel reinforcement(As instructed by the Engineer at site)

Column up to basement

Plinth beam

Brickwork in CM 1:5 mix using II class chamber bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete.

Basement

Super Structure

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, labour, lead, lift, etc., complete.

Exterior painting with two coats of approved exterior emulsion over one coat of primer for wall including cost of all materials, labour, lead, lift, etc., complete.

Supplying and filling of Red gravel for yard, labour for filling, watering and consolidation, including cost of all materials, lead, lifts, labour, etc., complete.(As instructed by the engineer at site)

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Supplying and fixing in position of 25mm dia pvc pipe of 10 kg/sq.cm pressure from the approved manufacturer apollo, chemplast, avanplast, valarmathi, usha, vimal etc., confirming to IS 4985 of 1968, 4984 of 1970 including cost of all special fixtures labour lead, lift, etc., complete.

Supplying and fixing of 15mm high quality brass Chromium plated screw down bib cock (Heavy Type) such as leader, zeolite and zenith of any other approved quality cost of all materials, labour, lead, lift, etc., complete.

Refilling with excavated soil other than sand in foundation and sides of masonry, consolidation as per std. specn. With water including all labour, lead, lifts. etc, complete.

Removing the excess earth to the basement area as instructed by field engineer including all labour lead, lift, etc., complete.

Supplying and fixing of RCCB safe trip of appd LEGRAND ISI make , 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.(As instructed by the engineer at site)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator) ( SD16 )

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point ( SD36 )

Supply and fixing of 18W 4 feet LED fitting complete with TW round blocks on wall or ceiling with LED and PVC unsheathed copper leads from terminals to the fitting.

Supplying and fixing of 300mm sweep wall mounting fan including cost of all materials lead, lift etc., complete.

Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at Control room, cost of all materials, lead, lift, labour charge, etc., complete.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 3 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supplying and fixing of wash basin of size 500x400 mm of approved quality neycer / parrys ISI including cost of wash basin with pedestal cock fixing using rag bolt and nut 15mm dia pvc connecting hose and outlet using 50mm dia pvc waste water pipe for outlet CP angle valve with all accessories including cost of all materials, labour, lead, lift, etc., complete.

Providing flooring with ellis pattern finishing of 20mm thick with cement concrete 3 to 10mm chips & pointed with same mortor including cost of all materials, curing, etc., complete.

Fabrication, supply and fixing of structural steel using required angles, flats and square bars including cost of all necessary fittings,painting with two coats of enamel paint, cost of all materials, labour, lead, lift etc., complete as instructed by the Engineer.

Supplying and fixing Galvalume sheet roofing with 0.5mm thick of approved quality by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts etc., complete complying with standard specification and as directed by the departmetal officers

K.S.MANJU (BID ID -1245178)

PRANEET AND CO (BID ID -1239903)

S.S.BUILDERS (BID ID -1244745)

T GOVINDARAJAN (BID ID -1243009)

MK DHANALAKSHMI ENGINEERING PRIVATE LIMITED (BID ID -1245362)