REPAIR REPLACEMENT OF INTERNAL WIRING FITTINGS FIXTURES AT SVN COLONY MES KEY PERSONNEL QUARTERS NAUSHAKTHI VIHAR AREA UNDER AGE EM OF GE ND VISAKHAPATNAM

Amount

The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. [ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE. [iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places. [iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work).

M & L for Point wiring with PVC insulated unsheathed multistranded copper conductor cable FRLS grade of size 1.5 Sqmm (nominal area) 1100V grade drawn through and including surface PVC conduit of size 20mm dia medium grade including accessories fixed on wall/floor/roof, etc including provision of modular terminal box with plate, provision of PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 1.5 Sqmm as earth continuity conductor and connecting to common earth dolly suitable for One light / fan point / Bell / 5 Amps socket point controlled by one, one way switch including taking down old point wiring with fittings & fixtures complete all as specified and directed.

All as per item No. 2 above but suitable for on light point controlled by 2 Nos of two way switches

All as per item No. 2 above but suitable for on 5 Amps socket point controlled by one switch on the same board

All as per item No. 2 above but point wiring with 2.5 Sqmm (nominal area) suitable for one power socket point on independent board complete all as specified and directed.

All as per item No. 2 above but point wiring with 4.0 Sqmm (nominal area) suitable for one power socket point on independent board complete all as specified and directed.

M & L for Point wiring with PVC insulated unsheathed multistranded copper conductor cable FRLS grade of size 1.5 Sqmm (nominal area) 1100V grade drawn through and including Concealed PVC conduit of size 20mm dia medium grade including accessories fixed on wall/floor/roof, etc including provision of modular terminal box with plate, provision of PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 1.5 Sqmm as earth continuity conductor and connecting to common earth dolly suitable for One light / fan point / Bell / 5 Amps socket point controlled by one, one way switch including taking down old point wiring with fittings & fixtures complete all as specified and directed. [Note: Quoted rate is deemed to be inclusive for necessary cutting chases in walls / floors / ceiling of any description, pinning in making good to disturbed surfaces where required and pointing in cement mortar 1:3 complete]

All as per item No. 7 above but suitable for on light point controlled by 2 Nos of two way switches

All as per item No. 7 above but suitable for on 5 Amps socket point controlled by one switch on the same board

All as per item No. 7 above but point wiring with 2.5 Sqmm (nominal area) suitable for one power socket point on independent board complete all as specified and directed.

All as per item No. 7 above but point wiring with 4.0 Sqmm (nominal area) suitable for one power socket point on independent board complete all as specified and directed.

M & L for Point wiring with PVC insulated unsheathed multistranded copper conductor cable FRLS grade of size 1.5 Sqmm (nominal area) 1100V grade drawn in existing concealed PVC conduit including provision of modular terminal boxes and white cover plate with frame including provision of PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 1.5 Sqmm as earth continuity conductor and connecting to common earth dolly suitable for One light / fan / bell point / 5 Amps socket point controlled by one switch complete all as specified and directed.

All as per item No. 12 above but suitable for on 5 Amps socket point controlled by one switch on the same board

All as per item No. 12 above but suitable for on light point controlled by 2 Nos of two way switches

All as per item No. 12 above but point wiring with 2.5 Sqmm (nominal area) suitable for one power socket point on independent board complete all as specified and directed.

S & F ceiling rose, 3 terminals, PVC/ polycarbonate, isolated body complete all as specified and directed

S & F modular bell push flush type 6 Amps

S & F Calling bell, AC, 230 Volts, single pole

S & F lamp holder, with back plate including LED bulb of 9 Watts capacity

S & F modular switch single pole, 1 way, 6 Amps, 1 module

S & F modular switch single pole, 1 way, 16 Amps, 1 module

S & F modular socket outlet, 6 Amps, 2/3 pin combined 2 module

S & F modular socket outlet, 6/16 Amps, 2/3 pin combined 2 module

S & F modular electronic fan regulator, socket type, omplete all as specified and directed.

M & L for sub main wiring with 3 runs of single core 1100 volts grade, PVC insulated, 10.0 Sqmm, drawn through and including suitable size surface PVC conduit and conduit accessories including provision of 1 run of 10.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 4 runs of 10.0 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.]

M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, 6.0 Sqmm, drawn through and including suitable size surface PVC conduit and conduit accessories including provision of 1 run of 6.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 3 runs of 6.0 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.]

M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, 4.0 Sqmm, drawn through and including suitable size surface PVC conduit and conduit accessories including provision of 1 run of 4.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 3 runs of 4.0 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.]

S & F in repairs MCB DB, TPN, 4 way, double door, 415 Volts with 200 Amps rated bus bar with all necessary wiring connections and making good disturbed surfaces complete all as specified and directed.

S & F in repairs MCB DB, SPN, 8 way, double door, 240 Volts with 200 Amps rated bus bar with all necessary wiring connections and making good disturbed surfaces complete all as specified and directed.

S & F in repairs MCB DB, SPN, 12 way, double door, 240 Volts with 200 Amps rated bus bar with all necessary wiring connections and making good disturbed surfaces complete all as specified and directed.

S & F in repairs sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB, SP, 20 Amps, 240 volts, 10 KA complete all as specified and directed.

S & F in repairs Isolator, 100 Amps, Four Pole, 50 Hz, AC supply complete all as directed

S & F in repairs MCB, Four Pole, 63 Amps, 50 Hz, AC supply complete all as directed

S & F in repairs RCCB, DP, 40 Amps, 30mA, complete all as directed

S & F in repairs MCB, SP, 6 to 32 Amps, 50 Hz, AC supply complete all as directed

S & F in repairs MCB, SPN, 40 Amps, 50 Hz, AC supply complete all as directed

S & F in repairs MCCB 4 Pole, 200 Amps, 50 Hz, 25KA, 415 Volts fixed thermal and magnetic setting with all necessary aluminium lugs and glands, etc complete all as directed

S & F in repairs MCCB 4 Pole, 100 Amps, 50 Hz, 25KA, 415 Volts fixed thermal and magnetic setting with all necessary aluminium lugs and glands, etc complete all as directed

S & F in repairs Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volt complete all as specified.

S & F in repairs Switch Piano, flush type, single pole, one way, 15 Amps, 230 Volt complete all as specified.

S & F in repairs switch socket combination multipurpose 3 pin, 5 Amps controlled by one 5 Amps switch complete all as specified and directed.

S & F in repairs switch socket combination, multipurpose, 2 in 1, 3 Pin, 5/15 Amps, flush type, universal controlled by one switch 15 Amps, 250 volts, complete all as specified and directed

Taking down existing ceiling fan of any type and sweep from any position and refixing the same in original position after necessary cleaning for dust, grease and applying one coat of synthetic enamel paint (spray painting) including filling the cavities with filler complete all as specified and directed by the Engineer-in-Charge. [Note: Quoted rate is deemed to be inclusive for writing MES Nos on the fans]

M & L for removing defective / burnt out winding of ceiling fans of any capacity and rewinding with super enamelled copper winding wire of suitable size complete all as specified and directed by the Engineer-in-Charge.

Supply and replacement of bearing suitable for ceiling fans of any sweep

Supply and replacement of fan blades suitable for ceiling fans of any sweep

Supply and replacement of canopy suitable for ceiling fans of any sweep

Supply and replacement of 2.5 mfd suitable for ceiling fans of any sweep

Supply and replacement of fan clamp with rubber bush and nuts & bolts suitable for ceiling fans of any sweep

Supply and replacement MS powder coated down rod of size 15mm bore 450mm (18'') long with necessary holes suitable for hanging ceiling fans of any sweep complete all as specified.

Supply and replacement MS powder coated down rod of size 15mm bore 1200mm (48'') long with necessary holes suitable for hanging ceiling fans of any sweep complete all as specified.

S & F LED tube light fittings, retro bar professional WH 5700K to 6200K and minimum 1800 to 2000 lumens of cool white comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F LED tube light fittings, 2 feet long of 900 to 1000 lumens of cool white wall mounted batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.

Taking down existing light fittings of any type and refixing in same / new location with new PVC flexible copper conductor wire of suitable size complete all as directed.

Taking down existing Exhaust fan / Air circulator / Pedestal fan of any type and sweep from any position and refixing the same in new / old position after necessary over hauling / servicing and cleaning for dust, grease and applying one coat of synthetic enamel paint (spray painting) including filling the cavities with filler including replacement of defective spares complete all as specified and directed by the Engineer-in-Charge. [Note: Quoted rate is deemed to be inclusive for writing MES Nos on the fans]

M & L for removing defective / burnt out winding of Exhaust fan / Air circulator / Pedestal fan of any capacity and rewinding with super enamelled copper winding wire of suitable size complete all as specified and directed by the Engineer-in-Charge.

S & F Building Security light LED type of minimum 4500 Lumens Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F Building Security light LED type of minimum 2500 Lumens Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs PVC box of size 250x250x155mm shock proof, rust proof, with provision for cable entry at bottom and/or sides, weather proof suitable for LT 1 Phase KWH meter including taking down and refixing KWH meter with all connections complete all as specified and directed

Taking down old DBs housing MS box of size (Appx 0.8mx0.85mx0.4m) from the existing location and making good the opening / surface to flush with existing wall with necessary brick work in CM 1:6, rendering in CM 1:4 and finishing the surfaces to match with adjoining surfaces complete all as directed

Taking down carefully KWH meter and refixing the same in original location duly replacing the burnt out copper wiring of suitable size complete all as directed

S & F in repairs Rigid non-metallic PVC conduit of 20mm dia complete with accessories such as junction boxes, tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories, lock nuts, saddles, pipe hooks, etc for drawing telephone / TV cables complete all as specified and directed.

S & F in repairs Rigid non-metallic PVC conduit of 25mm dia complete with accessories such as junction boxes, tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories, lock nuts, saddles, pipe hooks, etc for drawing telephone / TV cables complete all as specified and directed.

M & L for taking down existing electric geysers of any type and capacity including dismantling the spares and cleaning, servicing the geyser by descaling inner body of water tank and cleaning it with soap and acid mixed water, reassembling the geyser set and refixing the same in original position including checking for proper function complete all as directed by Engr-in-Charge. [Note: Quoted rate is deemed to be inclusive for any minor spares required. However geyser element shall be measured and paid seperately as supply only]

Supply only geyser element 1.5 KW capacity

S & F PVC junction box (1 to 4 way) suitable for 20mm dia PVC conduit

S & F PVC junction box (1 to 4 way) suitable for 25mm dia PVC conduit

S & F Aviation Obstruction light of LED type integral light comprising of aluminium housing with polycarbonate enclosure, 302 Nos LED along with other fixing accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including taking down existing light fittings of any type complete all as specified and as directed by the Engineer-in-Charge.

S & F Time switch for LED aviation light, Programmable every 1 min with backup of 6 years, 28 memory locations, current capacity 16A, weekly program, with 2 changeover (2 CO), total 14 programs per channel including Single phase contactor complete all as specified and directed

Supply and Laying LT XLPE insulated, PVC sheathed, bedded, galvanised steel strip or wire armoured, heavy duty, electric power cables of size 4 core 25 Sqmm, 1100 volts grade, with aluminium conductor laid in trenches / passing through pipe / duct / fixed on walls including taking down old cable complete all as specified and directed.

All as per item No. 70 but of size 4 core 16 Sqmm

All as per item No. 70 but of size 4 core 10 Sqmm

All as per item No. 70 but of size 2 core 6 Sqmm

Excavation in trenches not exc 1.5m wide and depth for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in hard / dense soil complete all as specified and directed.

Returning filling in, including spreading, levelling,watering and well ramming in layers not exc 25cm thickness as in soil complete all as specified and directed.

Removing excavated material /soil to a distance not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed

M&L for Sand filling in trenches using dry river sand as cushioning to under ground cable including spreading, levelling and consolidation complete all as specified and directed. [Note: Punned thickness of sand shall only be measured.]

M & L for laying sub class 'B' bricks of old size 230mm x 115mm x 75mm for cable protection laid across alignment of cable in trenches complete all as specified and directed.

M & L for cutting of road / hard standing for laying of cables / cable protection pipe and making good the disturbed portion in PCC 1:3:6, type C-1 using 20mm graded stone aggregate including removal of debris to a distance not exc 50m complete all as specified and directed.

Supply and laying GI pipe 40mm dia light grade including specials as required for cable protection fixed in any position complete all as directed

S & F Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified.

S & F Aluminium strip 25x3.15mm as roof conductors and down conductors buried in ground / fixed on wall with means of hylam sheet with epoxy based insulator and screws, bolts, nuts and lead washers complete all as specified and directed. (Note: Hylam sheet block shall be provided in two pieces each 10mm thick one fixed to base with brass screws and the other fixed over it]

S & F Earth continuity conductor or main earthing lead of 32x6mm GI strip fixed to wall on batten or recess or cases or buried in ground or drawn in conduit / pipe or fixed to poles complete all as specified.

S & F PVC cable tray of size 150mm width, 50mm depth fixed with and including necessary MS clamps, nuts, bolts and cover fixed to walls / ceiling including taking down old cable tray complete all as directed by the Engineer-in-Charge.

S & F PVC cable tray of size 100mm width, 50mm depth fixed with and including necessary MS clamps, nuts, bolts and cover fixed to walls / ceiling including taking down old cable tray complete all as directed by the Engineer-in-Charge.

S & F in repairs MCB DB, TPN, 8 way, double door, vertical type, 415 Volts with 200 Amps rated bus bar with all necessary wiring connection and making good disturbed surfaces of wall complete all as specified and directed.

S & F Test point terminal block made of gun metal or Phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head brass screws and secured to wall complete all as specified and directed.

S & F in repairs GI powder coated louvers suitable for exhaust fans 300mm sweep complete all as directed. [Note: Quoted rate is deemed to be inclusive for necessary scaffolding as required for work at any height]

Earthing complete with Galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground with earth pit not less than 2.25m deep below the normal ground level with top edge of plate not less than 1.5m below normal GL connected to GI earth strip 32x6mm by means of bolts, nuts, check nuts and washers of Galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on ompletion and as directed. [Note: The unit rate shall be deemed to include for excavation & earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS angle iron frame 40x40x6mm, cast iron cover, MS handle 12mm dia, CI funnel and wire mesh, GI watering pipe 20mm dia medium grade for watering, GI protection pipe light grade 40mm dia, earthing lead upto 7.5m complete all as specified in preambles of SSR Part-II and as shown in plate No. 3 of SSR Part-I.]

koneru enterprises

KANAKAJYOTHI ENTERPRISES

Srinivash Engineers

SAI SAMPATH ELECTRICAL AND ENGINEERING

SAI ENGINEERING WORKS

S R CONSTRUCTIONS

Mavee Syndicate

R AND A ASSOCIATES ENGINEERS CONTRACTORS

RATNA ENTERPRISES