CA NO GE(N)AMB-48(P)/2020-21 REPAIR/ MAINT OF CHARPOY, ALMIRAH, BED OTHER MISC FURNITURE MAINT OF WORKS UNDER BSO OF GE (NORTH) AMBALA CANTT

Amount

Charpoy GI pipe with Nylon Newar (FD-220)

Taking out unserviceable long rail from charpoy GI pipe and S&F new long rail 32mm bore medium grade matching with the existing shape & size including threading complete all as specified and as directed by the Engr-in-Charge. Note:Items will be dumped in advance before commencement of work along with purchase voucher.

Taking out unserviceable short rail from Charpoy GI pipe and fixing short rail duly threaded both the end of pipe retireved out of unserviceable long rail from srl item No1.01 above matching with the existing shape & size complete all as specified and as directed by the Engr-in-Charge.

Taking out unserviceable leg from charpoy GI pipe and fixing leg duly threaded one end of pipe retrieved out of unserviceable short rail from srl item No 1.02 above. MS plate 3 mm thick in round shape should be welded at the bottom of the legs matching with the existing shape & size complete all as specified and as directed by the Engr-in-Charge.

Taking out unserviceable GI 3 way elbow from charpoy GI pipe and S&F new elbow 32mm bore ISI marked matching with the existing shape & size. Weight of elbow shall not be less than 400 gms as approved complete all as specified and as directed by the Engr-in-Charge

Taking out unserviceable GI check nut 10mm thick, 32mm bore from Charpoy GI pipe and S&F new check nut ISI Marked. matching with the existing shape & size complete all as specified and as directed by the Engr-in-Charge.

Taking out unserviceable newar from Charpoy GI pipe, S&F new plywood 12mm thick of size 1990x910mm exterior grade BWR ISI Marked , IS code 303. Before fixing of plywood, all steel surfaces should be cleaned, loose part of charpoy to be framed and frame to be tightened including MS plate 3 mm thick in round shape shall be welded at the bottom of all legs. Making 03 Nos hole of equal size on both long rail and 02 Nos holes of equal size on both short rail by drill machine, S&F of 03 (Three) Nos MS flat stiffners of size 40 x 5 mm thick and 900 mm long duly hole both the end of stiffner by drill machine, hole should be matched with hole of long rail at equal distance on both the long rails and painting of all MS stiffner with two coat of synthetic enamelled black paint over a coat of red oxide. After that plywood in all four corners of the ply duly rounded in shape and smoothened by using sand paper etc. Plywood should be fixed with cap type nut & bolts as per sample held with BSO (North) Furniture Yard complete all as specified and directed by the Engr-in-Charge. Note:plywood will be dumped in advance before commencement of work along with purchase voucher. Note : Payment will be processed after fulfilling following condition:- (i) Verification of purchase voucher of plywood. (ii) Certification of plywood supplied on ground that plywood supplied is complying CA all as per specifications by manufacturers. (iii) Submission of test certificate of plywood from manufacturers. (iv) Make of ply shall be Dura Ply, Archid Ply, Bhutan Board, Archid Board, Century, Durian, Mysore Chip Board Ltd.

Table 3'x2' with or with out drawer steel (FD-223,310,283,1007, 1008)

Taking out unserviceable top from table 3' x 2' steel of any shape & size and S&F new top made of pre-laminated particle board 18 mm thick exterior grade BWR IS Code No-12823, one side teak face and other side white duly fixed with 4mm thick teak wood beading all around the top, matching with existing shape and size all as shown in drg complete all as specified and as directed by Engr-in-Charge.

Painting

Scratching old unserviceable paint from almirah large steel, cleaning and making the surface smooth and painting the same inside & out side with two coat of silver hammer tone paint with spary painting complete all as specified and as directed by the Engr-in-Charge.

All as per item srl No 3.01 here in before but Almirah medium steel complete all as specified and as directed by Engr-in-charge.

All as per item srl No 3.01 here in before but locker bed side steel complete all as specified and as directed by Engr-in-charge.

Sham Sunder Bansal

M/s R.K.Jain