DWSD Dhanbad 09-2024-25

Amount

V.T. Pump Set:- Supplying, Installation, Testing and commissioning of water lubricated Vertical Turbine Pump [ Make: Kirloskar/ Mather & Platt/ Jyoti/WPIL ] capable of discharging 82 LPS raw water against a total head of 41 meter at speed not more than 1500 RPM as per IS: 1710/1989 with column length not less than 20 m with closed type SS Impeller, SS line shaft, SS shaft sleeves, flanged type MS column pipes suitable for below the floor installation and existing delivery header coupled with vertical solid / hollow shaft operated on 415V±10%, 3 phase, AC, 50±5%Hz, 4 Pole, Duty-S1, Insulation-F, LT Squirrel Cage induction motor with suitable size of coupling as per latest IS specification [ Make: ABB/ BHEL/ Jyoti/ Kirloskar ] having 10% more BHP than the pump, with suitable size of CIDF Sluice valve-1no., CIDF NR Valve-1No., Pressure guage-1No. making alignment, making electrical connections, with all required tools, tackles, consumables as required, testing and commissioning on full load as per the direction of E/I. etc all complete.

Cost towards lifting of old 55 KW VT pump set with all 200 mm dia column pipes, Tee , short pieces, shafts, muff couplings, LT Motor etc with all accessories including all labour tools,tackles and transportation cost from pumping pkant to store room etc all complete.

Cost towards breaking of old PCC foundation and removing of all garbage from pump house to out side with lead of 100m with all labour tools and tackles etc all complete.

Cost towards making of new RCC foundation for setting and fixing of sole plate as per size and sample with all materials, all labour tools and tackles etc all complete as per site requirement.

Cost towards making ot thrust block support for VT Pump set with supplying and fitting of MS Rod, foundation bolts etc including welding works such as cutting and jointing etc as site requirement, with cement, sand , stone chips, as required and plastering and punnning over exposed surface etc all complete with materials, all labour tools and tackles etc all complete.

Cost towards making and fitting of short piece of 200 mm dia x 2ft long with 200mm dia flange at both end, nut bolt insertion rubber etc with all labour tools and tackles all complete.

Cost towards supplying and laying of 240 mm2 X 3.5 core PVC insulated and PVC sheathed, 1.1 KV grade armored Aluminium cable. Make – Polycab/ KEI/ Universal/ISI marked reputed make. (From 1.1KV Incomer to LT panel)

Cost towards supplying and laying of 50 mm2 X 3 core PVC insulated and PVC sheathed, 1.1 KV grade unarmored copper cable. Make – Polycab/ KEI/ Universal/ISI marked reputed make. (From LT panel to motor) length-150m x 2 layer for 3 motors i.e. 900 m

Cost towards making cable mouth for- 240 mm2 X , 3.5 core PVC insulated and PVC sheathed , 1.1 KV grade armored aluminuim cable

Cost towards making cable mouth for- 50 mm2 X , 3 core PVC insulated and PVC sheathed , 1.1 KV grade unarmored copper cable

RANCHI ELECTRICALS