Renovation and Repairing work in I.T.I. at Shil, Ta. Mangrol, Dist. Junagadh

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Removing and scraping of old deteriorated plaster of any thickness fromm wall /

1 R.C.C member including stacking of serviceable material and disposal of 944.00 19.88 Sqm

unserviceable from site of work with all lead and lift.

Removing dry or oil bound distemper by a washing and scraping and sand papering

2 the wall surface smooth including necessary repairs to scratches complete. 5793.00 11.53 Sqm

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

3 materilas and disposal of unserviceable materials with all lead and lift. 882.00 49.11 Sqm

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other attachment etc. complete and stacking

them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other attachment etc. complete and stacking

them within all lead and lift.(ii) Exceeding 3 Sq.M. in area.

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of

6 serviceable materilas and disposal of unserviceable materials with all lead and 51.00 54.63 Sqm

lift.(ii) A.C. sheet roofing.

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type,

7 flushing tank etc. including stacking the materials with all lead and lift. 14.00 414.23 Each

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing 15mm thick Mala cement plaster in single coat on smooth finished

(Similar)side of single or half masonary walls for interior plastering upto floor two

8 level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) 197.00 222.66 Sqm

incl. finishing with a floating coat of neat cement slurry etc. Ground floor level.

Providing 10mm thick cement plaster in single coat on celling ,Sofits And Stairs for

plastering finished even and smooth in cement mortar 1:3(1 cement 3 sand ) and

finishing with a floating coat of neat cement slurry and watering, curing etc.

complete up to Ground Floor

20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand)

and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete

Finishing wall with weather proof exterior emulsion paint of 100 % acrylic on wall

surface (two coats) On One Coat Of Primer Shall be of Weather Coat Exterior Paint

11 to give an required shape even shade after thoroughly brushing the surface to 4361.00 165.64 Sqm

remove all dirt, and remains of loose powdered materials. etc complete.

Providing and Laying Chemical Water Proofing Treatment Wall or Exposed

Surfaces of Buildings with Chemical Compound By Applying Single Priming Coat

And one Consicutive Finishing Coat as per Directed By Engineer In-charge

Including Cleaning of Surface with Brooming, Washing And Preparing Surface Free

from Dirt Etc Complete.

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or

equivalent & two coats of primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered smooth

Celling And Sloping Roofs painting (Two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface to give an even

14 shade including throughly brushing the surface free from mortar droppings and 1862.00 88.37 Sqm

other foreign matter and sand papered smooth.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Wall painting (Two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.

Providing And Fixing Pivoted Double Shutter With Glass Panel For Main Door And

Anodized Aluminium Section Frame With 50 X 150 mm T.W. Style And 50 mm X

mm T.W. Rail (Min.6 No) Frameing And Fixing 8mm Thick Water Proof Plywood On

Both Side Covered With Decorative 1 Mm Lamination Sheet On Both Side With Glass

16 Panel 5mm thick glass And Fixing Heavy Duty Hydraulic Floor Spring And Two Pair 12.00 3864.26 Sqm

Of 32 Mm Dia And 600 mm Long Matt Finish Ss Handle,Pivoted For Main Door

Including All Fixures (Aldraft, Stopper, Magnet & Floor Stopper) & All Fittings

Should Be Provided As Approved By The Architech Or As Per Direction Of Engineer

Providing and fixing 35 mm thick FLUSH DOOR SHUTTER using anodized

aluminum section frame equivalent to jindal door section no 19552 - weight not less

than 1.1 kg / mt. with wooden inserts for durable grip of door hinges. (frame size

17 38mmx 63.5 mm.), Shutters with both size Decorative 1 mm thick Laminated, 4.00 4940.92 Sqm

pattern and design is to be approved by the Architect, with Stainless Steel handle

size 30 Cm Long, Tower Bolt size 15cm, & Heavy Stainless steel Aldrop as per

detailed drawing / as directed.

Providing and fixing extruded aluminum window having extruded aluminum Colour

Powder Coated section frame main outer size 127mm x 38.10mm x 1.35mm ,@

Wt.1.384 Kg/mt,horizontal Four track member size 122.20mm x 31.75mm x

1.10mm @ Wt. 1.205 Kg/mt,vertical member of size 122.20mm x 31.75mm x

1.50mm ,@ Wt. 1.398 Kg/mt with sliding shutters of horizontal member size 40mm

x 18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical member of size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc complete for window.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing window having extruded aluminum Colour Powder Coated

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt,

horizontal Three track member size 92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt,

vertical member of size 92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt with sliding

19 shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, 12.00 1591.87 Sqm

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt with 5 mm

thick transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as per

details etc

Providing and fixing standared extruded of alluminium section of size 63mm x

38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium

frame for ventilation with 5 mm thick frosted glass as details etc complete for

Ventilation

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S.

laths inter-locked together through their entire length and jointed together at the

ends by end locks mounted on specially designed pipe shaft with bracket plates,

guide channels and arragements for inside and outside locking with push-pull

operation including the cost of hood cover and spring etc. complete.(A) Shutters

having width below 3.5 M.

Providing and fixing in position collapsible steel shutters with vertical channels 20 x

10 x 2 mm braced with flat iron diagonals 20 x 5 mm size with top and bottom rails

22 of T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys complete with bolts, nuts, 6.00 6116.59 Qtl

locking arrangements, stoppers handles including applying a priming coat of red

lead paint.

Providing and Fixing Machine cut, free edges, machine polished Granite stone slab

18 mm thick for Doors/Windows Cill and Jambs cladding as per design including

23 full molded round front edge and 1 cm nosing and laid on 10 mm thick cement 10.00 2864.36 Sqm

mortar 1:3 ( 1 cement:3 coarse sand) jointed with grey cement slurry including

rubbing and polishing finishing etc complete.

Providing and fixing M.S. grills of required pattern to wooden frames of windows

24 etc. with M.S. flats at required spacings and frame alround, square or round bars 300.00 106.23 Kg

with round headed bolts and nuts or by screws (A) Plain Grill.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Painting two coats (including priming coat) on new steel and other metal surface

with enamel paint, brushing, interior to give an even shade including cleaning the

25 surface an even shade including cleanicn the surface of all dirt, dust and other 84.00 128.94 Sqm

foreign matter.

Painting TWO coats (including priming coat) on previously printed steel and other

metal surface with synthetic enamel paint, brushing to give an even shade including

26 cleaning the surface of all dirt, dust and other foreign matter. 346.00 100.25 Sqm

Repairing and Refixing existing window/door providing & fixing necessary all

fixtures and fastening cutting edges for smooth opening, damaged part of glass and

Wooden member like bottom rail,style and shutter galass etc. and closing including

fixing the shutter on stone / wooden / MS frame with labour including cutting

bottom edge of door to match with flooring with necessary repairing to frames etc.

complete .

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress panel

shutter having extra reinforcement on sides & edges in Gel coat finish. The core of

the shutter & frame is to be filed up with injected fire retardant grade polyurethene

foam done in situ alongwith embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & shutter is to be water proof weather

proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S

hinges with necessary screws & alluminium fixtures & fastenings & fastener sleeve.

Providing sandwich type granite 18 mm thick platefom of 60 cm width and 70 cm

height including 25 mm thick polish kota stone at bottom of granite and bottom

flooring using 20 mm thick C.M.1:6 including vertical and bottom polish kota stone

29 for kitchen sink,granite panipatti and vertical support for granite,all labour and 15.00 7751.75 Sqm

material half round moulding etc.complete as per design excluding cost of kitchen

sink and vertical,horizontel support and shelves for storage.

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm /

300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and laying water proofing treatment with china mosaic tiles flooring over

avg 40 mm C.C. 1:2:4 {1 Cement : 2 sand : 4 Kapachi / Grit 6 to 12 mm size} bedding

for maintaining slope for plain and curve surface & 12 mm to 20 mm of broken

piece of ceramic / glazed tiles ( one for more colour as directed ) to be laid over

cement mortar bedding of C M 1:3 (1 cement : 3 sand ) contain one Kg of water

31 proofing materials per bag of O P C at plain or / and slops and to be tempered to 662.00 1070.32 Sqm

bring mortar ceramic up to surface with using white cement and colour pigment

including rounding of junctions and extending them up to 15 Cm along the wall and

curing with bends any patterns or design as per drawing and cleaning by using

oxalic acid etc complete.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall

ceiling and floor.(E) 50mm.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

polythene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall

ceiling and floor.(F) 75mm.

Providing and fixing Special Needs Range CRUSE SET,One piece EWC S trap 300 mm

with B1520118 Soft close seat cover,S2040159 CRANE Wall hung wash basin 665 x

545 x 190 mm F9030453 Single lever clinical faucet,B2210106 Wall mounted grab

bar 600 mm long,B2210108 Wall mounted hinged hand rail 750 x 100 {Cera or

equivalent} as directed by Architect Office

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with

jali of the following nominal diameter of self cleansing design with C.I scread down

or hinged grating including the cost of cutting and making good the walls.

Providing and fixing S.W. Gully trap with C.I. Grating brick masonary chamber

and water tight C.I. Cover with frame of 300 mm. X 300 size (inside) with standard

weight (I) Square mouth traps (B) 150 mm. X 100 mm size p or R type

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing wash basin with single hole for pillar tap with C.I or M.S.

brackets painted white including cutting holes and making good the same including

fitting (A) Vitreous china : (II) Flat back Wash basin 550mm x 400mm size in white

42 colour including providing and fixing M.I. fisher union, C.P. Brass waste coupling 32 6.00 2453.29 Each

mm dia and . Rubber Plug ,C.P. brass pillar tap of 15 mm dia. with capstain head

C.P.Brass Bottle Trap etc complete.

Providing and fixing brass screw down stop tap.(A) 15mm dia.

Providing and fixing wash down white vitreious china water closet EUROPEAN

TYPE W/C PAN of size 555x360x390mm (Standared Company) Make with intergal

44 "P" or "S" trap including jointing the trap with pan and soil pipe in vitereous china 2.00 3228.97 Each

white colour. Rate inclusive of providing and fixing PVC Flush Tank & Soft seat

cover of the same make.

Provision and fixing water closet squatting orissa type W.C. pan size 580mm

integral footrest and 100 mm P or S trap and in cluding 25 mm dia CP brass flush

valve and GI inlet connection etc. comp. (A) Vitreous china long pattern white or

Providing and fixing Urinal or approved quality including conecting the Urinal with

waste pipe , tap etc. complete.(A) White earthenware flat back or corner type size

430mm x 260mm x 350mm Including C.P. brass waste 32mmdia.

Providing and fixing screw down bib taps of following size.(B) Brass chromium

plated screws down Bib Tap. (i) 15mm dia.

Providing and fixing pillar tap, capstan head, screw down high pressure with

screws, shanks and back nuts. (i) 15mm dia

Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 25mm

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of

51 required capaKeshod each with all necessary fittings and connection etc. complete 25000.00 3.94 Ltr

on terrace.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Constructing brick masonary chamber for under ground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

Kg/cm2 in cm. 1:5 C.I. Cover with frame (light duty) 455 mm. X 610 mm. Internal

dimensions, total weight of cover with frame to be not less than 38 Kgs. weight of

cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1 cement :

2 coarse sand : 4 graded stone aggregate 20 mm. size ) foundation concrete 1:5:10

inside plaster 15 mm. thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls & bed concrete etc. complete. (I) inside

dimensions, 455 mm. x 610 mm. And 450 mm. Deep for single pipe line..

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded

53 stone aggregates 20 mm nominal size) and curing complete excluding cost of 2.00 3805.28 Cum

formwork in (A) Foundation and Plinth

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding the cost of purlins, Rafters

and Trusses.(1) 0.80 mm thick sheet..

RCC precast M.H. Frame Manufacture, supply & Delivery at store or at site of work

precast RCC M.200 Frame & cover sultable to drainage M.H. and as per type design

& Drawing including cost of reinforcement M.S.Angles or Flat, curing mold work etc

RCC precast M.H. Cover Manufacture, supply & Delivery at store or at site of work

precast RCC M.200 Frame & cover sultable to drainage M.H. and as per type design

& Drawing including cost of reinforcement M.S.Angles or Flat, curing mold work etc

Total Amount=

Total Amount=

I / Weam / are willing to carryout the work at……………………...……. % above/ below percent (Should Be written in figures and words)

of the estimated rate mentioned above Amount of my / our tender works out as under

(*Please strike out whichever is not applicable).

*Estimatedamount put to tender *Estimatedamount put to tender

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Deduct…….……% below Add……..…% Above

Net……………………….. Net……………………………

In words………………….. In words………………………..

Note 1:- The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer – In – Charge for which no extra

payment shall bemade

Note 2:- The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:- GST and Income tax TDS will be deducted at a source while making payments of bills.

Note 4:- In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement Consumption/16/C

Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Note 5:- Credit amount of Dismantled material (civil work) as per attached statement Rs

TOTAL CREDIT OF Rs.7,360.00 will be deducted from First Running bill of Contractor

Signature of Bidder

Executive Engineer

R&B Divison