E-TENDER FOR UNDER GROUND WORK OF LAYING 11 KV XLPE CABLE(RAILWAY/BRIDGE TRACK NHAI CROSSING) IN VARIOUS SCHEMES FOR ALL SUBDIVISION OFFICES UNDER SIDHPUR DO

Sr.No. Description Unit Quantity Unit in Amount

Laying (including installation, testing and

commissioning) of various size of Single

circuit 11 KV XLPE insulated Alluminum

armoured Cable in ground 1200 mm deep

and 300 mm wide trench, providing sand

cushioning below (75 mm thick layer of sand)

and above (75 mm thick layer of sand) of the

cable and covering it with RCC half round

Hume pipe (150 mm inner diameter with

thickness of 30 mm and One meter in length)

before refilling pre-bonding tap/warning tap

should provide below 700 mm from the

ground level and back filling the same to

make ground level as per original. As per

specification and drawing of DISCOM. (RCC

half round pipe should be provide

throughout on cable without gap). Only Cable

will be supplied by DISCOM.

Laying (including installation, testing and

commissioning) of various size of Double

circuit 11 KV XLPE insulated Aluminum

armored Cable in ground in single trench

1200 mm deep and 500 mm wide trench,

providing sand cushioning below (75 mm

thick layer of sand) and above (75 mm thick

layer of sand) of the cable and covering it

with RCC half round Hume pipe (150 mm

inner diameter with thickness of 30 mm and

One meter in length) before refilling pre-

bonding tap/warning tap should provide

below 700 mm from the ground level and

back filling the same to make ground level as

per original. As per specification and drawing

of DISCOM. (RCC half round pipe should be

provide throughout on cable without gap).

Only Cable will be Supplied by DISCOM.

Laying of various size of 11 KV XLPE insulated

Aluminium armoured cable above ground in

air for termination of cable on Pole as per

site condition and instruction of engineer in

Signature of Tenderer Company’s Round Seal Page 1 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

charge (Excluding cost of clamp and pipe)

including carting

Supply and Installation of clamps made from

50*6 mm GI flat (Minimum weight of flat

4 Kg per Set) for fitting for 110 mm GI/HDPE SET 100 130

Pipe above ground with the Pole including

cost of nuts & bolts.

Supply and Installation of clamps made from

50*6 mm GI flat (Minimum weight of flat

5 Kg per Set) for fitting for 160 mm GI/HDPE SET 100 150

Pipe above ground with the Pole including

cost of nuts & bolts.

Laying of various sizes of 11 KV XLPE

insulated Aluminium armoured Cable in

Cable Tray/ Trench over/below the ground

level excluding Cable Tray/Trench.

Laying of 6.11kg/cm2, class-4,160mm O.D.

12.0 mm thickness H.D.P.E. pipe confirms to

IS 4984 and BIS certification at a minimum

Depth of 1200 mm below the road surface by

Push through method, drilling the road with

HDD machine/manually without breaking the

road surface and laying of any size of HT XLPE

insulated Aluminum armoured Cable through

the duct as per the instruction of EIC and

specifications excluding cost of HDPE Pipe.

Only Cable will be supplied by DISCOM. (For

240 & 300 mm2 XLPE cable)

Supply of 6.11kg/cm2 , class-4,160mm O.D.

12.0 mm thickness H.D.P.E. pipe confirms to

IS 4984 and BIS certification for laying of

Providing and Laying of 6.11kg/cm2, class-

4,160mm O.D. , 12.0 mm thickness H.D.P.E.

pipe confirms to IS 4984 and BIS certification

at a minimum Depth of 1200 mm below the

road surface by Push through method,

drilling the road with HDD machine/manually

without breaking the road surface and laying

of any size of HT XLPE insulated Aluminum

armoured Cable through the duct as per the

instruction of EIC and specifications including

cost of HDPE Pipe. Only Cable will be

supplied by DISCOM.

Signature of Tenderer Company’s Round Seal Page 2 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

Laying of 6.11kg/cm2 , class-4,110mm O.D.

8.5 mm thickness H.D.P.E. pipe confirms to IS

4984 and BIS certification at a minimum

Depth of 1200 mm below the road surface by

Push through method, drilling the road with

10 HDD machine/manually without breaking the MTR 10 825

road surface and laying of any size of HT XLPE

insulated Aluminum armoured Cable through

the duct as per the instruction of EIC and

specifications excluding cost of HDPE Pipe.

Only Cable will be supplied by DISCOM.

Supply of of 6.11kg/cm2 , class-4,110mm

O.D. , 6.5 mm thickness H.D.P.E. pipe

confirms to IS 4984 and BIS certification for

laying of 11 KV XLPE Cable.

Providing and Laying of of 6.11kg/cm2 , class-

4,110mm O.D. , 6.5 mm thickness H.D.P.E.

pipe confirms to IS 4984 and BIS certification

at a minimum Depth of 1200 mm below the

road surface by Push through method,

drilling the road with HDD machine/manually

12 without breaking the road surface and laying MTR 50 1440

of any size of HT XLPE insulated Aluminum

armoured Cable through the duct as per the

instruction of EIC and specifications including

cost of HDPE Pipe. Only Cable will be

supplied by DISCOM. (For 70 & 185 mm2

Providing and Laying of Medium grade GI

Pipe having 110 mm Diameter at a minimum

Depth of 1200 mm below the road surface by

Push through method, drilling the road with

HDD machine/manually without breaking the

road surface and laying of any size of HT XLPE

insulated Aluminum armoured Cable through

the duct as per the instruction of EIC and

specifications including cost of GI Pipe. Only

Cable will be supplied by DISCOM.

Supply and Fixing of Medium grade GI Pipe

14 having 110 mm Diameter and minimum MTR 10 1240

length 2.5 meter

Providing and Laying of Medium grade GI

15 Pipe having 160 mm Diameter at a minimum MTR 210 800

Depth of 1200 mm below the road surface by

Signature of Tenderer Company’s Round Seal Page 3 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

Push through method, drilling the road with

HDD machine/manually without breaking the

road surface and laying of any size of HT XLPE

insulated Aluminum armoured Cable through

the duct as per the instruction of EIC and

specifications including cost of GI Pipe. Only

Cable will be supplied by DISCOM.

Supply and Fixing of Medium grade GI Pipe

16 having 160 mm Diameter and minimum MTR 10 1425

length 2.5 meter

Providing and Fixing of Heat Shrikable Indoor

Termination Kits for for 3-Core, 11 KV XLPE

Aluminium armoured Cable as specified with

17 connection of leads including cutting, NO

stripping of cable, insulations, providing

compression type terminal, crimping of lugs

with suitable crimping tool.

A 70 mm2 HT XLPE Cable NO 1 4718

B 120/150/185 mm2 HT XLPE Cable NO 10 4953

C 240 mm2 HT XLPE Cable NO 1 5252

D 300 mm2 HT XLPE Cable NO 1 5549

Providing and Fixing of Heat Shrikable

Outdoor Termination Kits for 3-Core, 11 KV

XLPE Aluminium armoured Cable as specified

18 with connection of leads including cutting,

stripping of cable, insulations, providing

compression type terminal, crimping of lugs

with suitable crimping tool.

A 70 mm2 HT XLPE Cable NO 1 5664

B 120/150/185 mm2 HT XLPE Cable NO 70 5982

C 240 mm2 HT XLPE Cable NO 1 6378

D 300 mm2 HT XLPE Cable NO 1 6676

Providing and Fixing of Heat Shrikable Stright

Jointing Kits for for 3-Core, 11 KV XLPE

Aluminium armoured Cable as specified with

19 connection of leads including cutting,

stripping of cable, insulations, providing

compression type terminal, crimping of lugs

with suitable crimping tool.

A 70 mm2 HT XLPE Cable NO 1 7199

B 120/150/185 mm2 HT XLPE Cable NO 20 7655

C 240 mm2 HT XLPE Cable NO 1 7880

D 300 mm2 HT XLPE Cable NO 1 8040

Signature of Tenderer Company’s Round Seal Page 4 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

Providing and Fixing of “Route marker” of CC

Concrete stone embedded in earth at least

300 mm below the GL and 450 mm above GL

at distance of approximately 100 Meter or as

20 directed by engineer in charge. The route MTR 150 300

marker must be painted with yellow colour of

stone with red colour for embracing on stone

–“UGVCL 11 KV Cable” including material,

painting &labour charges for excavation&

Strip type Earthing of XLPE Cable by providing

and fixing 25*3 mm GI hot dip strip of total

length of stip - 09 Mtr, 300*300*10 mm CI

earthing plate, 2'' PVC Pipe of 2 Mtr length

with coated green sleeve of Good quality;

providing of wood charcoal (25 KG Appx.)

And salt cubes ( 25 KG Appx.) Or bentonite

powder (50 KG Appx.) With material.

Earthing shall be as per REC standard and

specifications.

Labour work for fault find out in 11kv

185/240/300 mm2 XLPE cable

Labour work for second ,third & Next faults

23 find out on same time in same Each 2 6250

11kv185/240/300mm2 XLPE cable

24 Dismantling of XLPE Cable from underground Mtr 50 155

Dismantling of XLPE cable from Pole/Gantry

and re-climbing of XLPE cable

Providing and fixing of Wooden clamps for

26 cable suitable for 70/185/240 mm2 XLPE NO 20 320

Signature of Tenderer Company’s Round Seal Page 5 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

27 Re-fixing of V cross arm in proper positions Number 5 70

Replacement of V cross arm by new one with

28 Number 5 234

29 Re-fixing of top fiiting arm in proper positions Number 10 42

Replacement of top fitting arm in by new one

30 Number 10 50

Re-Tightening of loose guy set in all

31 aspects./Agjustment the tension in Number 10 175

Dismentalling of 8 mtr psc pole in usable

condition with crediting of fabrication at

32 Number 10 562

store & stacking of pole at safe and on road

Dismentalling of 10 mtr psc pole in usable

condition with crediting of fabrication at

33 Number 5 1233

store & stacking of pole at safe and on road

Dismantling of ms girder pole 9 to 11 mtr.

34 Number 1 932

Long incl. Crediting in store.

Dismentalling of transformer centre( 8 mtr

psc pole) with crediting of fabrication at

35 store & stacking of pole at safe and on road Number 1 2263

side(without transformer),pole &

transformer should be in condition as it was.

Signature of Tenderer Company’s Round Seal Page 6 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

Dismentalling of transformer centre( 10 mtr

psc pole) with crediting of fabrication at

36 store & stacking of pole at safe and on road Number 1 2660

side(without transformer),pole &

transformer should be in condition as it was.

Dismantling of ms girder pole 9 to 11 mtr

with crediting of fabrication at store &

37 stacking of pole at safe and on road Number 1 1828

side(without transformer),pole &

transformer should be in condition as it was.

Dismentaling of conductor from line 34/55

Dismentaling of dog conductor from line

Erection of psc poles of 8 *200 kg

includingexcavation of pit and refilling of

earth, fixing ofcross arms, top fitting clamps

anti-climbing devices, insulators etc.

40 Complete and painting of fabricatedmaterials Number 40 1113

used on the poles and numbering without

cost of nuts & bolts,paint as per standard

specification but excludingerection of guy set

Erection of psc poles of 10 *270 kg

includingexcavation of pit and refilling of

earth, fixing ofcross arms, top fitting clamps

anti-climbing devices, insulators etc.

41 Number 30 2466

Complete and painting of fabricatedmaterials

used on the poles and numbering with cost

of paint as per standard specification but

excludingerection of guy set and earthing.

Erection of steel poles of 9 to 11 meters

includingexcavation of pit and refilling of

earth, fixing ofcross arms, top fitting clamps

anti-climbing devices, danger board,

42 Number 1 1865

insulators etc. Complete and paintingof steel

pole, fabricated materials used on the

poleand numbering without cost of nuts &

bolts,paint as per standardspecification but

Signature of Tenderer Company’s Round Seal Page 7 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

excluding erection of guy set andearthing.

Erection of coil type/ci plate type earthing

including cost of coal salt etc. But without

43 cost of nuts & bolt but without cost of gi Number 100 579

wire as per standard & specification.(10 kg

salt+10 kg coal)

Erection of double pole structure of 8 meters

200 kgpsc poles including excavation of pits

& refilling ofearthing, fixing of channels,

supporting angles,clamps, anti-climbing

devices danger boards,insulators

44 Number 2 2530

etc.complete and painting of

fabricatedmaterials used on the poles and

numbering without cost of nuts & bolts, paint

as per standard specification but

excludingerection of guy sets and earthing.

Erection of double pole structure of

meters 200 kgpsc poles including excavation

of pits & refilling ofearthing, fixing of

channels, supporting angles,clamps, anti-

climbing devices danger boards,insulators

45 Number 1 5320

etc.complete and painting of

fabricatedmaterials used on the poles and

numbering without cost of nuts & bolts, paint

as per standard specification but

excludingerection of guy sets and earthing.

Erection of double pole structure of 9 to

meters.steel pole including excavation of pits

& refilling ofearth, fixing of channels,

supporting angles, clamps,anti-climbing

devices danger boards, insulators

46 Number 1 3655

etc.complete & painting of poles,fabricated

materialsused on the poles and numbering

without cost of nuts & bolts,paintsas per

standard specification but excluding erection

of guy set and earthing.

Erection of guy set including excavation of pit

and refilling of earth, as per standard

specification with stay clamps, stay wire,

anchor road, turn buckle, eye bolt, guy

Signature of Tenderer Company’s Round Seal Page 8 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

insulatore, cc block etc.

HT TAPPING FROM EXISTING POLE

INCLUDING OF FIXING OF CROSS ARM NO 20 459

STRINGING OF 34/55 MM2

CONDUCTOR INCLUDING INSULATOR

49 AND BINDING ONE CONDUCTOR PER KM 3 2020

LABOUR WELFARE CESS 1% 38602.69

51 GST @ 18 % NO

I / We am /are willing to carry out the work LAYING OF UNDERGROUND CABLE under Sidhpur DO

(1) On company Rate (2.) _______% Above 3) _______% Below of estimated rate

(1) In case of L1 bidder backs out from tender process before allotment of order or during tender

process, UGVCL has right to call next lowest bidder/bidders to execute work at least as per L1

(2) Quantity which mentioned in Schedule – B is tentative and it may vary as per field office

Executive Engineer

UGVCL SIDHPUR DO

Signature of Tenderer Company’s Round Seal Page 9 of

Place: Signature of Tenderer Date: