estimation for conferance hall

Amount

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 3"x11/2" [email protected]/m

8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials through autoclaving process

For shutters of doors, windows & ventilators: including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required 21.1.2.2 Powder coated aluminium (minimum thickness of powdercoating 50 micron) section:(50x40)

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Each 359.00

Providing and fixing aluminium shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineerin-charge 21.16.2 Powder coated minimum thickness 50 micron aluminium

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasketetc. Complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall bepaid in basic item): 21.3.1 With Aluminium Composite panes of 2.0 mm thickness

Float glass panes 5.5 mm thick glass panes

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

Providing and laying Ceramic matt finished floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622,of approved make, in all colours, shades, except White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4(1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.

Supply and fix Aluminium Sandwich panel Material supplied by Hospital authority Fixing charge

Wall cladding fabric

Supply and fix 12mm Ply wood

SAPRU K JACOB

Navajyothi Power Links