Interior work of office cabin first floor at work shop building in ms unit

od306224/2021_2022 Fabricating at site full height partition of width 75mm upto 270cm/ ceiling ht from floor by fixing a frame work using GI square tube sections with grid size within 90cm x 90cm spacing with cutouts for 6mm glass (wherever provided) with Beech wooden frame work paneling in specified sizes . Both sides of the GI frame work is covered using 9mm tk marine plywood / Flexy plywood neatly cut and jointed without gap or overlaps and fixed on to wooden /plywood frame work using steel screws. Overlaying the partition with laminate mica finish and providing necessary glass (6mm thick) openings areas as per the direction of engineer in charge (including the rate of 6mm thick glass).GI square tube sections shall be paid separately.

50.10.1 Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od306290/2021_2022 Office Table and side table<br>Fabricating and supplying at site office tables of size 160X70x75 and side table of size 100x40x75 using 18mm thick marine plywood with 1mm thick laminate finish. The top is formed of two peice and joined using necessary hardwares. The straight cut edges are finished with PVC edge banding tapes and also hot pressed edge banding tapes (2mm/3mm as required) of matching colour. The office table is provided with one key board tray, one cupboard (with shutter) and one drawer (sliding type)and the side table is provided with one CPU stand, one key board tray, one cupboard (with shutter) and one drawer (sliding type) with necessary handles and locks. The drawers are fitted with drawer slide of width 45cm with same height, 4" stainless steel handles and locks and bottom PVC bushes all inclusive.

od297129/2021_2022 Workstations<br>Fabricating and supplying at site work station tables of size 110x60x75 cm made up of 18mm thick marine plywood with mica finish. The top is formed of two peice and joined using necessary hardwares. The straight cut edges are finished with PVC edge banding tapes and also hot pressed edge banding tapes (2mm/3mm as required) of matching colour. The work station is provided with one CPU stand, one key board tray, one cupboard (with shutter) and one drawer (sliding type) with necessary handles and locks.

od316459/2021_2022 Workstations<br>Fabricating and supplying at site work station tables of size 180x40x75 cm made up of 18mm thick marine plywood with mica finish. The top is formed of two peice and joined using necessary hardwares. The straight cut edges are finished with PVC edge banding tapes and also hot pressed edge banding tapes (2mm/3mm as required) of matching colour. The work station is provided with one CPU stand, two key board tray, one cupboard (with shutter) and one drawer (sliding type) with necessary handles and locks.

od322748/2021_2022 Ledge Shelves<br>Fabricating and fixing at site ledge shelves of height 70cms, 40cms width and length as per site requirements in positions marked in the rooms behind seats using 19mm thick MPW with laminated post formed edges for the top and shutters and racks made of 15mm MPW + laminate with cut edges and corner perfectly finished with PVC edge banding tapes of same colour. The shutters should be provided with auto closing hinges, locks and handles. All the inside surfaces should also be finished with laminate. Measurement shall be made on elevation area.

od282740/2021_2022 Supplying at site chairs for the Executives with following specification full Back Exe.chir, Gas.lift, Syn.tilt, Moulded from seat & back, PU arm rest, Nylon base. The colour of the upholstery to be finished as approved by the Architect

od282741/2021_2022 Supplying at site chairs for the Executives with following specification Med. Back Exe.chir, Gas.lift, Syn.tilt, Moulded from seat & back, PU arm rest, Nylon base. The colour of the upholstery to be finished as approved by the Architect.

od312191/2021_2022 Supplying at site chairs for visitors with following specification S shaped metal frame with arm rest and cushion base. The colour of the upholstery to be finished as approved by the Architect.

od323720/2021_2022 Vertical Blinds<br>Supplying and fixing on to existing windows and glass partitions, vertical blinds of width 100mm of approved make on power coated channels and fittings (color, quality to be approved by Architect)

od274005/2021_2022 Frosted film on glass surface<br>Fixing on to glass partition / glass door / single wimdow counter partition, frosted filim strips of make 3M or garware or equivalent having a thickness of 50 to 60 microns (plain /pattern).<br>

od312231/2021_2022 Signages<br>Fabricating and supplying and fixing at site signages of varying sizes made out of brushed matt Aluminium finish ACP sheet (3mm) folded / cut to shape and edges finished and vynil lettering cutouts in corporate colour of suitable sizes sticked on to it. The signagesare either fixed on to wallusing SS buttons self adhesive tapes /SS chains or to be placed on table tops as in specified positions.

od274006/2021_2022 Pinup Boards<br>Fabricating and supplying and fixing at site pinup board of size (70x43cm) made out of 10mm thermocoal cork board cut to size covered with sponge and fabric to fixed on to half partition

od274008/2021_2022 Potteries<br>Supplying and fixing at site in the space provided as shown with terracotta potteries or sculptures with artificial planters / flowers. The potteries / sculptures should be of natural terracotta shade and of height

od277685/2021_2022 Providing and fixing aluminium die cast body tubular type godrej or approved brand hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with all necessary accessories and screws etc. complete as directed by engineer in charge.

9.101.1 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper

od324005/2021_2022 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of brass/ SS with mat finish handle of approved quality with necessary screws etc . complete.

9.74.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:200x10 mm

9.70.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:125x64x1.90 mm

od320665/2021_2022 Providing and fixing 6mm thick wash basin Mirror (Saint-Gobain) with 10mm thick edging of teakwood finish of size 200x80cm.

13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od320676/2021_2022 Labour charge for unskilld worker for chipping,clearing, Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical/manual means and neatly cleaning the surfaces where ever required as per the direction of Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

Riyas .A