Compound illumination GNM student of Balurghat NTS

Amount

Supply & Delivery of 8.0 mtr long sweged and welded steel stubular poles as per IS- 2713-1980 (410-SP-14) approx. weight 111 Kg having following diamensions, Bottom- 139.7mm dia. X 4.5mm thick X 4.5m long, Middle- 114.3mm dia. X4.5mm thick X 1.75m long, Top- 88.9mm dia X 3.25mm thick X 1.75m long incl. pole base ( Make- Subham Pole / Utkarsh/Bansal / Calcutta poles & Tubes).

Erection of 8mtr Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (600x600x1700mm), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly as per G.S. ( H-1 /1.a)

Supply & Erection of 2 Mtr long pole 80mm dia ST pole with base plate & pole cap incl. C.C. ( 6:3:1 ) muffing 0.30 Mtrs dia and 0.30 Mtr. incl. 3mm thick neat cement finish and making earth bolt washer and G.I. earth bolt on plate as to G.S.

Supplying & Fixing round shape header to maintain minimum dia 300 mm made with 40 mm dia GI pipe connecting with 25mm dia pipe. Round header welded with 10inch long 80mm dia GI Pipe with necy bolts nuts etc incl. pinting two coats of Al paint over one coat of RO primer as per GS and as per direction of EIC.

S / F single/double arm header fabricated with 100mm dia G.I. pipe of 10" length welded with 1.2m long 40mm dia. G.I. pipe at an angle of 15 deg with plate incl. S / F nuts, bolts washer etc.

a) Single arm header

b) Double arm header

Supplying and Fixing 200 x 150 x 100mm PVC water proof looping cable box having hinged Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. , Comprising of one 250 V, 16A DP MCB unit, one Four point connector bar on porcelain insulator etc. and fixed the same on pole with necessary parallel Groove clamping arrangement and protecting pipe, 1.5 mtr from ground leavel incl. painting as to GS.( Model - Sintex -GSJB 2014)

S & F 240V LED Outdoor luminaries having Pressure dia cast aluminum housing. Heat resistant glass. IP65 protection and uniform distribution with suitable clamping arrangement incl necessary interconnection as per direction of EIC. (Non Schedule)

i) Philips - BRP 333 LED110 CW R5C FG PSU S1 V1

ii) BVP 192 LED165 CW NB FG A1 PSU GR SPD

iii) WT 202W LED 10S NW PSU S3 PC

Loop wiring by 3 x 1.5 sq. mm. PVC insulated Cu. Wire through PVC pipe from Loop Box to Fittings of the pole as per direction of EIC.( E-2/ 1.a + E-9 / 1.b) (Polycab/Havells/RR Kabel)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI-Medium GI pipe. [G1/2a]

Supply and delivery of following 1.1 KV grade XLPE/PVC armoured cables (Make: Polycab/Havells/KEI PWD approved make as per direction of EIC).(Non Schedule)

(i) 4 core 6 sqmm For Compund

Laying 1.1 KV gr. PVC /A Cable of (approved make) following sizes embedded in U.G. trench 460 mm average depth with brick protection on the top of the cable with 8(eight) Nos. bricks per metre, including filling the space between the brick & Cable and also the trench with shifted soil, levelling up and restoring surface duly rammed.

i) 4 core 6 Sq.mm PVC / A cable in U.G. trench

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

i) 4 core 6 Sq.mm PVC

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : [F4/7]

(i) 4 core 6 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : [F5/8b]

(i) 4 core 6 sqmm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required [F6/11]

(i) 25 mm dia

The Rates to be quoted by all the bidders should be Inclusive of all taxes and duties including GST and LWC.

MILLENNIUM ENGINEERS CO OP SOCIETY LTD (BID ID -5645588)

M/S B. K. DEY SARKAR (BID ID -5645358)