CA NO CWE/FZR-09/2024-25 REPAIR AND MAINT TO INTERNAL ELECTRIFICATION SYSTEM AND CONNECTED WORKS AT DHOLEWAL PHASE-I AND PHASE-II UNDER GE LUDHIANA

Amount

Taking down carefully point wiring of any type (ie on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittingSupply and fixing ixutres such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawal plug, screw etc including removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and as directed by Engineer-in-Charge.

Material and labour for point wiring with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit fire proof, medium grade, ISI marked 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box / modular junction box, bell mouth, reducer, bend and flexible conduit etc including cutting chases in wall for laying of conduit and making good to all disturbed surfaces and matching the same with adjoining specifications, sunk type pressed steel terminal switch box 1.6mm thick with 3 mm thick plastic laminated sheet with modular plate and shutter fixed with steel screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable 1100 volt grade green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and as directed by Engineer-in-Charge for one light point controlled by one switch SP one way.

All as per srl item No. 2 here in before but for one fan point controlled by one switch and regulator complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 2 here in before but for one bell point controlled by one bell push complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 2 here in before but for one light point controlled by two way switches complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 2 here in before but for one socket outlet 5 Amps on independent board complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 2 here in before but for one socket outlet 5 Amps on same board controlled with other switch complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 2 here in before but with 2.5 Sqmm (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and as directed by Engineer-in-Charge.

Material and labour for point wiring with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through PVC casing caping and accessories and terminated in and including new sunk type pressed steel terminal switch boxes 1.6 mm thick with plastic laminated bakelite sheet top cover 3 mm thick make hylum fixed with nickel polished steel screws with washers and including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable 1100 volt grade, green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and as directed by Engineer-in-Charge. for one light point controlled by one switch SP one way.

All as per srl item No. 09 here in before but for one fan point controlled by one switch and regulator complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 09 here in before but for one bell point controlled by one bell push complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 09 here in before but for one socket outlet 5 Amps on same board controlled with other switch complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 09 here in before but for one socket outlet 5 Amps on independent board complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 09 here in before but one light point controlled by two way switches complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 09 here in before but with 2.5 Sqmm copper (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm with stranded copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing socket out let 5 Amp, 5 pin flush type complete all as specified and as directed by Engineer-in-Charge.

Material and labour Socket outlet multi purpose 3 in 1, 6 pin, 5 & 15 Amps, flush type complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Bell push switch flush type 5 Amps, SP, 240 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Bell electric AC (Ding Dong) 240 volt SP complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing for batton holder insulated body complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing in repair LED retrofit lamp 9 W (TU) 6500K, 220-240v, B-22 base cap.

Supply and fixing for ceiling rose surface type bakelite 65 x 50 mm three terminal complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing five step fan regulator, electronic type, single phase, including connection complete after dismantling/ removing unserviceablve regulator complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 18/20 watt LED (4 Ft) batten for surface pendent and conduit mounting high transmissitivity diffuser,high lumen complete with 20W LED tube rod (4ft) including taking down existing light fittings complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing LED 18W stellar pro round resses type down light PDC aluminium housig downlights corona series warm white color including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing LED 18W stellar pro surface type down light PDC aluminium housig downlights corona series warm white color including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair energy saving bulk head luminaries with opal diffuse LED 10 watt 6000 K power factor more than 0.90 IP-65 class-I protection with high efficiency Led electronic driver, surge protection upto 2 KV, operative on 140 volts to 270 volts AC supply complete prewired products must be made in India only connection and testing complete all as specified and as directed by Engineer-in-Charge.

Material and labour Sub main wiring with PVC insulated cable copper conductor FRLS two single core 6 Sqmm drawn PVC rigid non metallic conduit including earth continuity FRLS copper conductor 1100 volt grade, 6 Sqmm PVC insulated with green insulation complete all as specified and as directed by Engineer-in-Charge.

Material and labour Sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn PVC rigid non metallic conduit including earth continuity FRLS copper conductor 1100 volt grade, 4 Sqmm PVC insulated with green insulation complete all as specified and as directed by Engineer-in-Charge.

Supply and fix sheet metal enclosure with socket plug top and SPN MCB 20Amp , 10kA, 50 Hz and enclosure with a two pin and earth plug and socket complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 16/20 watt LED (4 ft) flameproof batten suitable for single and twin T8 tube of 16/20 Watt,Recommended for Gas/Vapor group of IIA & IIB and Zone 1 & 2 IP65 Protected with LED tubes complete all as specified and as directed by Engineer-in-Charge.

Material and labour in replacement of 4 way TPN Distribution box Double door with metal double door (IP-43 protection) fabricated of CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, Neutral bar, Standard din rail,earth bar and cable ties for cable management, top and bottom removable gland plates complete all as specified and as directed by Engineer-in-Charge.

Material and labour for replacement TPN MCB 16 to 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828 of 1996, IEC 60898 of 2002 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for replacement TPN MCB 40 TO 100Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828 of 1996, IEC 60898 of 2002 complete all as specified and as directed by Engineer-in-Charge.

Material and labour in factory made Pantone 7541C shade powder coated distribution board SP & N 12 way Double door fabricated of CRCA sheet with metal door (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as a incomer and 10 SP MCBs as outgoing complete all as specified and as directed by Engineer-in-Charge.

Material and labour in factory made Pantone 7541C shade powder coated distribution board SP & N 8 way Double Door fabricated of CRCA sheet with metal door (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as a incomer and 6 SP MCBs as outgoing complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 41 here-in-before but of size 4 ways Double Door complete all as specified.Note for srl item 37,40,41& 42 :- MCB,s SPN & SP shall be measured and paid for separately.

Material and labour SP MCB 6 TO 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete all as specified and as directed by Engineer-in-Charge.

Material and labour Single Pole & Neutral MCB 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box complete all as specified and as directed by Engineer-in-Charge.

upply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm 02 corenominal cross section in service connections complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing energy saving recess mounting deep drawn LED luminaire, 34/36 watt, 6000K suitable for false ceiing of size 60cm x 60cm, having power factor more than 0.90 IP-20 class-I protection with efficiency LED electronic driver BIS approved surge protection 2 KV (minimum), operative on 140 volts 270 volts AC supply, complete prewired, connecting and testing complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing LED post top lantern 20 W e-top with aluminium die cast housing cum heat sink with PMHA diffuser in IP 65 including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-65 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired complete all as specified and as directed by Engineer-in-Charge.

Supply and fix LED garden light fittings 10W, 240V, 50Hz,rated input IP-66, P.F- not less then 0.95, incl with PCC (1:2:4) foundation higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular Metal flush box 3 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch one Modular type with plate , 5 Amps, 240 Volt AC single pole, one way complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch one Modular type with plate, 15 Amps, 240 Volt AC single pole, one way complete all as specified and as directed by Engineer-in-Charge.

Material and labour Socket 2 in 1 pin, 5 Amps,two Modular type with plate and shutter complete all as specified and as directed by Engineer-in-Charge.

Material and labour Socket 3 pin, 15 Amps,two Modular type with plate complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing , Bell push switch two Modular type 5 Amps, SP, 240 volts complete all as specified and as directed by Engineer-in-Charge. .

Supply and fixing Modular White cover plate with frame,12 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular White cover plate with frame,8 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular White cover plate with frame,6 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular White cover plate with frame,4 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular White cover plate with frame,3 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular Metal flush box 12 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular Metal flush box 8 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular Metal flush box 6 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular Metal flush box 4 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular Metal flush box 3 module complete all as specified and as directed by Engineer-in-Charge.

Material and labour for earthing complete with & including galvanized MS earth plate of size 600 x 600 x 6 mm thick, buried vertically in ground to a depth not less than 2.25 metre below ground level, with lop edge of earth plate not less than 1.5 below ground level connected to galvanized earth wire soldered and riveted or connected to earth plate by means of nuts, bolts , check nuts & washers, of galvanized iron or steel all as Shown in electrical plate No. 3 of MES SSR Part- I (2009) and connected to panel board, all as specified and testing on completion including provn of earth wire 4 mmm dia duly protected with and including 15 mm dia bore medium grade GI pipe upto 7.5 (maximum) meter from electrode to earth point including provn of the earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate and GI light grade watering pipe of 20mm dia bore with funnel with wire mesh including all necessary excavation & earth work in any type of soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6 type C-1 as in earth chamber, 50 mm thick RCC cover using cementconcrete 1:2:4 type B-0 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work and MS frame using MS angle of size 40mm x 40mm x 6mm complete all as specified & directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to the department.

CHOUDHARY ENTERPRISES (BID ID -3087607)

Durga Electricals (BID ID -3075666)