ESTIMATE OF 20 HP PUMP, CABLE, PIPE AND PANEL BOARD WITH FITTING AND INSTOLATTION AT VARIOUS LOCATION IN KALAVAD NAGARPALIKA.

AT VARIOUS LOCATION IN KALAVAD NAGARPALIKA.

It Quantities Item Descrption Estimated Rates Unit Total Amount

It Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated according to

but may be in Figure in Words estimated

more or quantities.

Providing & erecting open well horizontal mono

block pump set with cast iron body, complete

for three phase submersible motor having [I]

Rupees FiftyThree

For 20 HP 3 phase open well horizontal mono

1 3.00 53332.00 Thousand Three Hundred Set

block pump set suitable for 1700 LPM to

LPM @ 33 to 51 MTR head suitable for 65 /80

mm dia delivery pipe

Providing & Supplying of IS} Marked High

Density Poly Ethylene (HDPE - PE-100) Pipes in

standard length suitable for Sewage &

Industrial Effluents as per IS Specification no.

14333-1996 or its latest revision /

amendments including all local & central taxes Rupees One Hundred

2 350.00 & duties, freight charges, loading, unloading & 184.83 EightyFour Paise RMT

conveyance to departmental stores etc, EightyThree Only

complete. (HDPE (PE-100) Pipes in standard

length suitable for Sewage, Industrial Effluents

& Rising main Providing & Supplying) HDPE

PIPE 75MM DIA, 10.0 kg/cm2

It Quantities Item Descrption Estimated Rates Unit Total Amount

It Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated according to

but may be in Figure in Words estimated

more or quantities.

Rupees TwentyTwo

Providing and fixing of PVC/HDPE special

Thousand Four Hundred

3 1.00 material all diameter for PVC/HDPE pipe@ 22468.65 LS

SixtyEight Paise

10.0% of pipe cost lump.

Lifting of submersible motor pump set

complete with required No .& size of casing

pipes by means of proper chain pulley block Rupees Two Thousand

4 3.00 and pipe. wrenches. Job includes stacking of 2996.67 Nine Hundred NinetySix

pipes chronologically after due checking of Paise SixtySeven Only

threads.©Above 120 mtr.

Lowering of submersible motor pump set at the

depth of following ,complete with required.

Nos. and size of casing pipes erected by means

of proper chain pulley block & pipe wrenches Rupees Two Thousand

5 3.00 after checking of threads of each pipe with 2996.67 Nine Hundred NinetySix

coupling to take the load of the pump set and Paise SixtySeven Only

pipe assembly filled up with water (C)Above

It Quantities Item Descrption Estimated Rates Unit Total Amount

It Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated according to

but may be in Figure in Words estimated

more or quantities.

Supplying & erecting approved make motor

control cubical panel [Star delta] made from

16G CRCA sheet duly epoxy powder painted

inside and outside with hinged doors and

locking with suitable size of ON - OFF isolator

(AC 3 / 23 duty) main fuses. Digital volt and

current meter (in a single unit) with micro

controller based control unit and current

sensing single phasing preventer electronic

overload protection, over voltage

(Programmable) protection and under voltage

(Programmable) protection, prod less dry run Rupees TwentyFour

6 7.00 protection programming facility for setting of all 24047.09 Thousand FourtySeven NOS

parameter like overload current, high voltage Paise Nine Only

limit, low voltage limit, dry run limit with digital

indication on seven segment LED display for

any fault like over load, high voltage, low

voltage, dry running single crimped, electronic

star delta timer, feather touch start / stop push

buttons to be erected on angle iron frame.

Grouted on wall the contactors will be of L& T,

Siemens , BCH make only)

It Quantities Item Descrption Estimated Rates Unit Total Amount

It Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated according to

but may be in Figure in Words estimated

more or quantities.

Supplying & erecting XLPE (IS:7098) (I)-88 ISI

unarmoured copper cable 1.1 KV grade to be Rupees Two Hundred

7 1200.00 erected as directed of following size. (G) 3 292.90 NinetyTwo Paise Ninety RMT

core 6 Sq. mm Only

Providing and fixing Material of HDPE jointing

special material (Stainless Steel Pipe Nipple, Rupees One Thousand

8.1 10.00 Flash and its suitable nut bolt set for all 1439.25 Four Hundred ThirtyNine NOS

Diameters) 75 mm dia Paise TwentyFive Only

Providing and fixing Material of HDPE jointing

special material (Stainless Steel Pipe Nipple, Rupees One Thousand

8.2 12.00 Flash and its suitable nut bolt set for all 1644.28 Six Hundred FourtyFour NOS

Diameters) 90 mm dia Paise TwentyEight Only

Providing and fixing Material of HDPE jointing

special material (Stainless Steel Pipe Nipple, Rupees One Thousand

8.3 10.00 Flash and its suitable nut bolt set for all 1949.30 Nine Hundred FourtyNine NOS

Diameters) 110 mm dia Paise Thirty Only

Rupees Three Hundred

9 17.00 Fixing Material(epoxy and solution) Market Rate 333.30 ThirtyThree Paise Thirty NOS

It Quantities Item Descrption Estimated Rates Unit Total Amount

It Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated according to

but may be in Figure in Words estimated

more or quantities.

I/ We am/are willing to carry out the work at _____________________% above / below _____________________________%

below / above the estimated rates mentioned above amount of my / our tender works out as under :-

Estimated amount put to tender : Estimated amount put to tender :

Signature of contractor Chief Officer

KALAVAD NAGARPALIKA

It Quantities Item Descrption Estimated Rates Unit Total Amount

It Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated according to

but may be in Figure in Words estimated

more or quantities.

1) All the work shall be carried out as per MOST specification and specification on the division or as directed.

Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for under all conditions,

site moisture weather etc.

In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then the difference in

consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned in tender. However no extra payment

shall be made for use of additional Quantity of cement as per actual concrete mix design. Concrete mix design shall be done in GERI laboratory

The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification and details of work

and amount involved at site without any payment as directed by the Engineer in charge.

Testing of materials be as per statement attached with the Specifications, the materials shall be tested in G.E.R.I. Bill for testing shall be paid by

5) the Executive Engineer and 1% of the (one percent) of amount put to tender after shall be recovered from the running account bills of the works.

(As per G.R. (R&B) Deptt., No. TNC/1085/4/C dtd. 20.12.91.

6) The contractor shall quote even "NIL" if no reduction is proposed.

One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS". In terms of the

7) Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other construction workers regulation of equipments

and conditions of service Act-1996)

8) Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.

The contractor is solely responsible to bare all applicable taxes. I.e. GST etc. and department will not entertain any contractor representation to

9) reimburse any financial burden due to applicable taxes : i.e. GST etc.

Signature of contractor Chief Officer

KALAVAD NAGARPALIKA