Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-AOC 37 SUBHASH NAGAR AIR FORCE JODHPUR 342 008 | JODHPUR | JODHPUR | RAJASTHAN | 342008 | L1 | Accepted-AOC L1 | |
| 2 | L2₹33.0 L+₹1.1 L (3.30%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹34.0 L+₹2.0 L (6.39%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹37.1 L+₹5.2 L (16.2%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹34.0 L
EMD Value
₹67,960
Closing Date
18 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) No 02 Jodhpur
GE (AF) No 2 Jodhpur AF Stn Jodhpur
Spl repair to Bldg P-1416 and P-1417 at AF Stn Jodhpur
2023_MES_629309_1
8433/E8
Open Tender
Civil Works
Item Rate
150 days
GE (AF) No 02 Jodhpur
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (AF) No 02 Jodhpur
₹67,960
Yes
16 Jan 2024
21 Nov 2023
20 Dec 2023
21 Nov 2023
18 Dec 2023
6 Dec 2023
28 Nov 2023 - 5 Dec 2023
Amount
Special repair to Bldg P-1416 and P-1417 at AF Stn Jodhpur
Taking down cement plaster in brick walls,stone wall,ceiling of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.
M& L for 15 mm thick rendering on block masony or concrete surfaces in CM 1:4 on external walls at height upto 20.0 m from ground level, finished even and smooth without using extra cement complete all as specified. Note:- Necessary formwork required will not paid seperatly.
M& L for 15 mm thick rendering on block masony or concrete surfaces in CM 1:6 on internal walls at any height, finished even and smooth without using extra cement and all as specified.
M& L for 10 mm thick rendering on ceiling surfaces in CM 1:3 on finished even and smooth without using extra cement and all as specified.
Supply only integral water proofing compound.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer, white or tinted, upto 20 m height from ground leven all as directed.
M&L for complete removal of existing treatment of walls and applying one coats of cement base paint over a coat of primer, white or tinted,upto 20 m height from ground leven all as directed.Note:- Necessary formwork required will not paid seperatly.
M&L for preparation of old ceiling surface and applying one coats of white washover and , all as directed.
M&L for preparation of new plastered or unplastered surfaces of ceilings and applying two coats of white washover and , all as directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a layer wall care putty, all as directed.
M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a layer wall care putty, all as directed.
M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and com[plete all as specified.
M&L Cement concrete type B-0, 25 mm thick 1:2:4 (12.5mm graded aggregate) complete all specified.
M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified.
M&L for coloured glazed ceramic coloured tiles of size 450x300x 7mm thick on walls/vertical surfaces including 10 mm thick rendering in CM 1:4,complete all as specified and as directed.
M&L for machine cut Kota stone slab flooring 20-25 mm thick over 15 mm thick screed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
M&L for machine cut Kota stone slab 20-25 mm thick on skirting, dado over 10 mm thick rendering in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm.
Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm.
S & F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.
S & F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.
S&F in repairs vitreous- China wash down water closet EWC Squatting pan (pedestal Pattern) including all fixing arrangement complete all as specified and as directed.
M&L for water proofing treatment of sunken floor of WCs bathroom etc by applying of the following specifiaction:-(i) Cleaning of sunken floor surface with mechanical means i.e wire brush/air blower etc and remove all loose/unsound material dirt dust etc. (ii)Applying cement slurry mixed with acrylic based polymer modified cementious composite compund coating Hydroproof Xtra of FOSROC /Equivalent of Dr Fixit of Pidilite industries Ltd in the ratio 1:2:4 (one part of acrylic polymer : two part of water and four partof cement) (iiii) First layer of cement slurry @0.444 kg /sqm mixed with acrylic based modified cementious composite compund @0.222 litre/sqm and allow it to air dry for 4 hour. (iv) Second layer of cement slurry @0.222 kg /sqm mixed with acrylic based dified cementious composite compound @0.111 litre/sqm and allow it to air dry for 4 hour followed with water curing for 48 hours (v) 200 micron thick polytgen film shall be pasted with help of adhesive over treatment . Note:- Joints of WC/Trap/Soil waste shall be prperly sealed with sealing compund . Testing of all traps and joints and sunken slab shall be done as per IS-1742 before filling and tiling work.
S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length screwed for iron pipe .complete all as specified and as directed by Engineer-in-Charge
Fixing only in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length screwed for iron pipe .complete all as specified and as directed by Engineer-in-Charge
S&F in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete.
S&F in repair 15 mm bore stop valve/ angle valve, chromium plated with long shank and cup, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions as directed by Engineer-in-Charge.
S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.
S&F in repair brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union as directed by Engineer-in-Charge.
S&F in repair CP tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and all as specified and directed by Engineer-in-Charge
S&F in repair CP soap dish, fixed to plugs with chromium plated screws and all as specified.
S&F in repairs grating doom 125 mm dia with or without waste hole of PTMT (minimum weight 40 gms)
S & F PVC waste pipe 32 mm bore and 1000/900 mm long for WHB all as specified and as directed
S&F in repairs brass chromium plated health faucet of 15 mm bore complete as directed by Engineer-in-Charge.
S&F in repairs 15 mm bore two- in- one bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S & F in repair PVC valveless, syphonic action type, flushing cistern,low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe complete all as specified
Fixing only in repairs flushing cistern and flushing pipe (including of brackets), fixed in repairs complete all as specified and directed.
S & F Plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm.
S & F in repair 100 mm Junction CI T with access door , single, equal or unequal, ordinary or inverted with spigot or socket branch complete all as specified.
S & F in repair 100 mm CI traps ‘P’ or ‘S’ complete all as specified and directed.
S & F in repair 100 mm Branch pieces, single (equal or unequal), ordinary or inverted(spigot or socket type) or with parallel branches complete all as specified.
S & F in repair 100 mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified and directed.
S & F in repair 75 mm Junction CI T with access door , single, equal or unequal, ordinary or inverted with spigot or socket branch complete all as specified.
S & F in repair 75 mm CI traps ‘P’ or ‘S’ complete all as specified and directed.
S & F in repair 75 mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed floor or trench complete all as specified and directed.
S & F in repairs for 100 mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified & directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site.Note-Quoted rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and refixing in same opening after repairing the door and complete.Note-Quoted rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.
M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones.
S&F figured sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each paneand complete all as specified.
S&F aluminium anodised barrel tower bolt of extruded section 150 mm size complete
S&F Butt hinges 100 mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified.
S&F in repairs aluminium anodised barrel tower bolt of extruded section 200 mm size complete.
S&F in repairs 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.
S&F in repairs MS 300 mm , ordinary rat tail rod pattern springs including rooler and roller plate complete all as specified.
S&F in repairs floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor.
S & F aluminium handles, cast type,anodised of 150 mm size complete all as specified.
Resecuring or easing & adjusting without taking down shutters of any description exc. 2 sqm each.
Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-charge
M&L for framed work such as grills, grating etc. with ends of bars shouldered and/or riveted, or forged into spikes ; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing framework of water tanks and similar work conforming to Fe290.Gde-E-165 and complete all as specified.
M&L for preparation of new wooden surface of any description not otherwise provided over 10 cm width or girth and applying one coats of synthetic enamel paint and complete.
M&L for preparation of old painted wooden surface of any description not otherwise provided over 10 cm width or girth and applying one coats of synthetic enamel paint and complete.
M&L for preparation of new steel surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer and complete.
M&L for preparation of old painted steel surface of any description not otherwise provided over 10 cm width or girth and applying one coats of synthetic enamel paint and complete.
S&F PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints fixed in walls including brackets and complete all as specified.
M&L upto 6 m height from ground including neccessary suttering and form work for applying 10mm thick bonding coat of modified styrene butadiene emulsion (SBR bonding agent i.e. Nitobond SBR 45) in proportion 1 (Nitobond SBR 45) : 1(water) : 3 (OPC) by volume with the brushes etc to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with old surface including removal of loose / disintegrated old concrete / plaster surface preparaion etc and applying RCC (1:1.5:3) OR 15 mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45 ) in proportion 1:3 by weight 5 litres Nit bond SBR 45 to added to 50 KG Cement with 13 litre water addition, finished surface to match with existing surface of ceiling, beams, chajja and alike complete all as specified & directed.
S&F MS TMT bars 10mm dia and over, cut to length, bent shape required, including cranking , bending, hooking,welding etc and binding with MS wire 0.9mm dia(annealed).
Taking down carefully copper/aluminum point wiring (Light/ fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, stacking at site for reuse or removing materials to store for keeping in for taking credit and making good the disturbed surfaces / walls/ floors etc,.
M&L for point wiring with 1.5 Sq. mm, multi-stranded copper conductor, single core, PVC insulated and unsheathed cable for phase and neutral, including 1.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly, drawn in surface/concealed conduit heavy duty (HMS Grade), GI terminal boxes not less than 1.0mm thick fixed flush to wall surface, covered with & including 3 mm thick plastic laminated sheet top cover or including modular plates of required size for mounting switch and sockets etc. complete all as specified and directed for following : - Note : Quoted rates deems to be included cost of modular plate for mounting switches, sockets & regulators as required at site. Cutting into chases required for concealing heavy duty (HMS Grade) PVC conduits and making good to damaged surface shall be measured and paid separately under relavant item.
One light / fan point controlled by one switch one way.
One 3 pin 5 Amp switch & socket outlet on same board with other switches.
S&F switch modular single pole one way 6 Amps 230 volt 1 module.
S&F Socket modular 6 Amp 2/3 pin combined two module.
S&F Ceiling rose surface bakelite 65x50mm three terminal.
Fixing only light fitting any type, connecting up with twin core PVC insulated and PVC sheathed flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Note : Serviceable light fittings taken down against item No 72.00 shall be used at site as directed by engr-in-charge.
Supply and fixing LED light fitting wall /roof mounted, Aluminium housing, 1 x 22 watt including LED tube with driver complete suitable body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 kV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 15%, lumen output should not be less than 90 lumens per watt, total input voltage range 140-280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin complete all as specified and directed. Make Zaquar Cat Part No. LGLZU1X022XC or equivalent.
Supply and fixing LED light fitting wall /roof mounted, Aluminium housing, 1 x 10 watt including LED tube with driver complete suitable body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 kV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 15%, lumen output should not be less than 90 lumens per watt, total input voltage range 140-280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin complete all as specified and directed. Make : Zaquar Cat part No. LGLZ01X010XC or evuivalent make.
NOTES FOR LED LIGHT FITTINGS & BULBS : (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced on site free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries.
psj build solutions and company
Savitri Enterprises
Bansal Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .