Construction of Newely Upgraded 50 Beded Civil Hospital at Jawali

Amount

Excavation in foundation trenches etcetera in earth work in all type of classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and work doing in saturated soil, including chiseling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil, including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the excavated soil clear from the edge of excavation within all leads, as directed by Engineer-in- charge and then returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-Charge, disposed earth to be levelled and neatly dressed including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Excavation in drains and channels etc. in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, pick jumper blasting work, hard blasting work including chiseling or wedging out rocks where blasting is prohibited and doing work in saturated soil including cost of shoring, strutting and pumping or bailing out water (surface and sub soil water) upto any depth and any quantum of water including clearing of slush which may arise during dewatering including dressing of sides and bed and disposing of all excavated earth upto any leads and lifts, disposed earth to be levelled and neatly dressed as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax, sale tax, malkana and all other taxes as imposed by the Government.

Filling in plinth with sand under floors including watering , ramming, consolidating and dressing complete as per HPPWD specifications or as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, Toll tax sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring in all height below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Foundation footings, basis of columns etcetera and mass concrete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all height/ depth height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Flat surfaces such as soffits of suspended floors, roofs landings, shelves and the like floor etcetera upto any thickness upto all floor level including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all height/ depth, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Beams, cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers upto any height/ depth/ thickness upto all floor level including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all height/ depth, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Columns, Pillars, posts and struts, (square rectangular or polygonal in plan) in any height/ thickness/ depth upto all floor level, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all height/ depth height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Stair cases with sloping or stepped soffits excluding landings upto all floor level including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (three point one five milimetre) thick welded with angle iron in frame 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforced concrete and plain concrete work in vertical surfaces, such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like upto all floor level complete as per H.P.P.W.D. specification or as per directions of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all height/ depth height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Edges of slab and break in floors and walls upto any width, upto all floor level, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (One cement isto four sand isto eight graded/ crushed stone aggregate 40mm (Forty milimetre) nominal size) and curing complete excluding the cost of form work in foundation and plinth/ depressed floor in all depth, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Stone filling tightly hand packed with hard stone of approved quality under floor including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newton per square mill metre ) with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic metre and curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in Foundation, footing, bases of columns and the like and mass concrete including pumping or bailing out water and removal of slush if any and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete of grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newton per square mill metre ) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre including curing complete as per H.P.P.W.D. specification or as directed by Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depth/thickness upto all floor level, including carriage of material within all leads, lifts and other incidentals. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newton per square mill metre ) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre and curing complete excluding the cost of form work in columns, pillars posts and struts in all depth / height includi ng pumping or bailing out water if any including carriage of material within all leads , lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newton per square milimetre ) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre including curing complete as per H.P.P.W.D. specification or as directed by Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in stairs cases (except spiral stair cases) in all depth/thickness upto all floor level, including carriage of material within all leads, lifts and other incidentals. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newton per square milimetre ) with cement contents not less than 320 kg (Three hundred twenty kilogram) including curing complete in wall any thickness (But not less than 0.10 mtr.) as per H.P.P.W.D. specification or as directed by Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in stairs cases (except sprial stair case) in all depth/thickness upto all floor level, including carriage of material within all leads, lifts and other incidentals. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newton per square milimetre ) with cement contents not less than 320 kg (Three hundred twenty kilogram) and curing complete, including the cost of form work but exluding the cost of reinforcement for reinforced concrete work in concrete Chajjas for all thickness, for all floor levels including finishing the exposed surface with cement mortar 1:3 (one cement isto three sand) and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newton per square milimetre ) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre including curing complete as per H.P.P.W.D. specification or as directed by Engineer-in-Charge, including the cost of form work but exluding the cost of reinforcement for reinforced concrete work in moulding as in cornices, windows sills etcetera not exceeding 15cm (fifteen centimetre) in girth, in all depth/thickness upto all floor level, including carriage of material within all leads, lifts and other incidentals. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth upto all height/ depth including pumping or bailing out water/dewatering and including racking out joints with cement mortor 1:6 (One cement isto six sand) and curing complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Random rubble masonry coursed with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement isto six sand isto twelve graded /crushed/ broken stone aggregate 20mm (Twenty milimetre) nominal size) at plinth level in cement mortar 1:6 (One cement isto six sand) and curing complete, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying tor steel reinforcement of Tata/Sail for reinforced cement concrete work including bending, binding and placing in position complete in all height including cost of binding wires complete and other incidentals including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying damp proof course 100mm (one handred milimetre) thick with cement concrete 1:2:4 (One cement isto two sand isto four graded/ crushed stone aggregate 12.5mm (Twelve point five milimetre) nominal size) and curing complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 (Eighty/ one hundred) or VG-10 (VG-ten) using 1.70 kg (One point seven zero kilogram) per square Metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Half brick work using second class common burnt clay building bricks in super structure above plinth level to all floor level in cement mortar 1:4 (One cement isto four sand) with hoop iron as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Brick work using second class common burnt clay building bricks in super structure above plinth level to all height/ floor level in cement mortar 1:6 (One cement : six sand) and curing complete, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing coloured anodised, anodized aluminum work for door, windows, ventilators and partitions frames with extruded built up standard tubular and other sections of approved make Jindal/Hindalco conforming to and IS 733 and 1285 . The external door No.14081 of size 127x44.45x 3.00mm (One hundred twenty seven into forty four point forty five into three milimetres) and internal door section No. 4524 and 4526 of size 101x44.45x3.00 (One hundred one into forty four point forty five into three milimetres) anodized transparent or dyed to required shade according to IS 1868 (minimum anodic coating of grade AC- 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fast including necessary filling up of gaps at junction, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleats angle, aluminum, snap beading for glazing/paneling C.P. brass/stainless steel screws, all complete as per Architectural drawings, design and specifications and the directions of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana, GST and all other taxes as imposed by the Government.

Providing and fixing coloured anodized aluminum work for shutter of door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make Jindal/Hindalco conforming to IS 733 and IS 1285 anodized transparent or dyed to required shade according to IS 1868 (minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junction, at top, bottom and sides with required PVC/neoprene felt etcetera, aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleats angle, aluminum, snap beading for glazing/paneling C.P. brass/stainless steel screws. All complete as per Architectural drawings, design, specifications and the directions of Engineer-in-Charge including providing and fixing hinges/ pivots and making provision for fixing of fittings where ever reqired including the cost of PVC/neoprene gaskets as required (fittings and glazing/penelling shall be paid for separately), including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana, GST and all other taxes as imposed by the Government.

Providing and fixing fly proof stainless steel grade 304, wire gauge of 0.5mm (Zero point five milimetres) dia and 1.4mm (One point four milimetres) aperture wire mesh in existing Aluminum shutters, as per drawing and technical speifications as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 8mm (eight milimetre) thick aluminium grill anodized powder coated of Jindal/ Hindalco pattern to existing windows/ventilators with 80mmx80mm (eighty milimetre into eighty milimetre) panels holes with 25x8mm (Twenty five into eight milimetre) aluminium flat in windows and ventilators including fixing with aluminum screws or bolts and nuts complete in aluminum channels base frames as per approved drawing design and specifications (Aluminum channels base frames to be measured and paid for separately), including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing factory made PVC door frame single rebate of any colours of size 50x47mm (Fifty into forty seven milimetres) with a wall thickness of 5mm (five milimetres) made out of extruded 5mm rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 Numbers (Two Numbers) . of 150mm (One hundred fifty milimetres) long brackets of 15mmx15mm (fifteen milimetres into fifteen milimetres) M.S. square tube, the vertical door profiles to be reinforced with 19mmx19mm (Nineteen into nineteen milimetres) ) M.S. (Mild steel) square tube of 19 gauge (Ninteen gauge) EPDM rubber gasket weather seal to be provided throughout the frame including fixing of door frame to wall with M.S. (Milld steel) screws 100 (One Hundred) long with wooden or rawl plugs emedded in masonry complete as per manufactures specification and direction of Engineer-in-Charge,including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing to existing door frames, 30mm (Thirty milimetres) thick factory made PVC panelled door shutter consisting of frame made out of M.S. (Mild steel) tubes of 19 gauge (Nineteen gauge) thickness and size of 19mm x19mm (Nineteen milimetres into nineteen milimetres) for styles and 15mmx15mm (Fifteen milimetres into fifteen milimetres) for top and bottom rails, ( Code no 9.120 ) of Rajshri M.S. (Mild steel) frame shall have a coat of steel primers of approved make and manufacture M.S. (Mild steel) frame covered with 5mm (five milimetre) thick heat moulded PVC "C" channel of size 30mm (Thirty milimetres) thickness, 70mm (Seventy milimetres) width out of which 50mm (fifty milimetre) shall be flat and 20mm (Twenty milimetres) shall be tappred in 45 degree (Forty five degree) angle on either side forming style and 5mm (Five milimetres) thick, 95mm (Ninety five milimetres) wide, PVC sheet out of which 75mm (Seventy five milimetres) shall be flat and 20mm (Twenty milimetres) shall be tapered in 45 degree (Forty five degree) on the inner side to form top and bottom rail and 115mm (One hundred fifteen milimetres) wide PVC sheet out of which 75mm (Seventy five milimetres) shall be flat and 20mm (Twenty milimetres) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten milimetres) thick, 20mm (Twenty milimetres) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm (Five milimetres) thick both side PVC Sheet to be fitted in the M.S. (Mild steel) frame welded/sealed to the style and rails, joints mitred and jointed with solvent cement adhesive including fixing of PVC shutter with existing frame with M.S. (Mild steel) butt hinges 100x50x1.90mm (One hundred into fifty into one point ninety milimetres) size with necessary screws etc complete, including carriage of material within all leads , lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. Upto 5mm depth and 5 mm (Five milimetres) width, as per approved drawing design and specification, including carriage of material within all leads , lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 12mm (twelve milimetre) thick phenol bonded prelaminated Board (Both side) water proof Matt finish ISI marked IS No.12823 of Action Tesa/Merindam/Kitlam/ Kitvista/Greenlam of approved shade for in infill panel of panalled shutters including bright finished/ black enamelled iron butt hinges with necessary screws, as per specification, approved drawing, design etcetera complete, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 25mm (Twenty five millimetre) thick one side prelaminated water proof commercial board of Century Ply / kit ply exterior//interior grade ISI marked No. 12823 for SDB shutters with 6mm (Six milimetre) thick hard wood edging all round and PGI sheet lining inside of the shutters of approved shade as per specification, approved drawing, design, etcetera complete, including carriage of materialwithin all leads , lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing glazing with glass panes of 6mm (six milimetre) thickness of Modiguard Saint Gobian for shutters (weight not less than 15.00kg/sqm ((fifteen point zero kilogram per square metre) with putty and nails as per approved drawing design and specification, including carriage of material within all leads , lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing glazing with glass panes of 5mm (five milimetre) thick plain glass weight not less than 12.50kg (twelve point five zero kilogram) of Modiguard Saint Gobian for shutters with putty and nails complete as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing glazing with frosted glass panes 4mm (four milimetre) thick weight not less than 10.00 kg/sqm (ten kilogram per square metre) of modiguard/Saint Gobian for shutters with necessary screws and nails complete, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 25mm (Twenty five milimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ Kit ply /duro ply / Marion Centuary ply (ISI Marked) for cup Board shutters including 19mm (nineteen milimetre) thick shelves and back side of the cupboard shall be of 8mm (eight milimetre) thick ply and cut portion of shutter shall have 8mm (Eight milimetre) hard wood edging. The shutter from out side shall be finished with 1mm (One milimetre) thick lamination of Century greenlam/action Tesa/merinolam of approved shade and fixing top PTMT handles 125mm (one hundred twenty five milimetre) long shall be provided in wood colour with nickel plated bright finished piano hinges with necessary screws etcetera (area for payment shall be measured for front only) as per approved drawing design and specification and further as per the directions of the Engineer-in-Charge, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Cup Board shutter Magnetic catcher with necessary screws etcetera complete, as per approved drawing design and specification and as per the directions of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 65x35mm (sixty five into thirty five milimetres) special quality bright finished brass cup board locks or ward robe locks with six levers including necessary screws etcetera complete (Indian make of approved quality) as per approved drawing design and specification and as per the directions of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing stainless steel curtain rail with rollers stop ends and brackets in pelmets with curtain rod 25mm (twenty five milimetres) dia and brackets complete, as per approved drawing design and specification and as per the directions of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 300x16mm (Three hundred into sixteen milimetre) anodized aluminum sliding door bolts anodized Transparent or dyed to required colour and shade with bolts and nuts necessary screws etc. complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 250x10mm (two hundred fifty into ten milimetre) size anodized aluminum Tower bolts(Barrel type) anodized transparent or dyed to required colour and shade with bolts and nuts necessary screws etc. complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150x10mm (One hundred fifty into ten milimetre) size anodized aluminum Tower bolts(Barrel type) anodized transparent or dyed to required colour and shade with bolts and nuts necessary screws etc. complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetre) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Aluminum oxidized PILOT/ sheel or equivalent oxidized 250mm (Two hundred fifty milimetre) size hooks and eyes complete in all respect, as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Aluminum oxidized Hydraulical door closer complete, as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) bright finished brass floor door stopper with rubber cushion and necessary screws etcetera to suit shutter thickness complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 25 mm (Twenty five milimetre) thick chima pink Granite stone (single Slab ) flooring of uniform colour in combination with black granite as per approved shade laid on 20mm (twenty milimetre) thick base in cement mortar 1:3 (one cement isto three sand) mix with pigment to match the shade of Granite stone including rubbing, polishing Semi/ Round nosing moulding edging wherever required complete as per approved drawing, design and specifications, upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 19mm (ninteen milimetre) polished Grey Chima Pink Granite Stone having semi/ round nosing laid over 20mm (Twenty milimetre) (average) thickness base of cement mortar 1:3 (one cement : three sand) and jointed with grey cement slurry mixed with pigment to match the shade of Granite stone including rubbing and polishing complete in work top of Reception Counter / Nursing station counter/ Under counter / wash basin and water trough as per Architectural drawing, design and specifications, upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying anti skid water proof stain and impact resistant heavy duty vitrified tiles of Kajeria/Orient /Restile/ Nitco/ Rak/Bell/AGL/Sim Polo/Johnson/ Somany 600mmx600mmx10mm (six hundred isto six hundred isto ten milimetre) millimeter) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimeter) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required up to all floor level, complete as per HPPWD specifications or as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 300X600/300X450 mm (Three hundred into six hundred obleque three hundred into four hundred fifty milimetres) Ceremic Glazed tiles of Restile/ Nitco/Rak / Kajaria/ Simpolo/Somany / Orient & Bell / AGL/Johnson/ Somany in cladding/skirting , risers of steps and dados upto 120/135cm (One hundred twenty obleque one hundred thirty five centimetres) height with Granite Semi round Moulding on top laid over on 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement isto three sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles complete as per approved drawing , design and specifications, or as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 300x450mm (Three hundred into four hundred fifty milimetre) Ceramic glazed tiles in Dado /of Kajaria/ Nitco/ Simpolo/Bell/ Johnson /AGL laid over 12mm (twelve milimetre) thick cement mortar 1:3 (one cement :isto three sand) and jointed with cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete in all respect upto all floor level as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, GST, malkana and all other taxes as imposed by the Government.

Providing and laying Double charge/ Ultra charge vetrified tiles of size 600x600mm (six hundred into six hundred milimetre) and 10mm (ten milimetres) thick in grey/ coloured of Nitco/ Restile/ Kajaria/ Orient-Bell/AGL/Simpolo/ Johnson/Somany of approved shade in flooring, treads of steps and landing laid on a bed of 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement isto three sand) laid over and jointed with neat cement of slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete in all respect upto all floor level as per the directions of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, GST, malkana and all other taxes as imposed by the Government.

Providing and laying 300x300mm (Three hundred into three hundred milimetre) antiskid ceremic tiles of premium Quality of Nitco /AGL/RAK/SIMPOLO/ Kajaria/Somany/Oriental Bell /Johnson as per approved shade in flooring 12mm (twelve milimetre) thick in cement mortar 1:3 ( one cement isto three sand) finiished with flush pointing in white cement mixed with pigment of required shade to match the shade of tile complete as per approved drawing, design and specifications, complete upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 300x450mm (three hundred into four hundred fifty milimetre) Ceremic glazed tiles in Dado /skiring risers of steps of Johnson/Nitco/Orient-Bell / Kajaria/AGL/ 6mm (six milimetre) thick laid on a bed of 12mm thick in cement mortar 1:3 (one cement isto three sand) finished with flush pointing in white cement mixed with one border matching/contrast at top as per approved drawing, design and specifications, upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five milimetres) Automatic Hydraulic compressed and polished precast terrazo tiles of ISI marked No.1237 in 50% (Fifty percent) white cement and 50% (Fifty percent) grey cement having 55% (Fifty five percent) white chips and 15% (Fifteen percent) each dark green, yellow and maroon chips.the size of the chips shall be 0,B and 2B sizes of NTC or its equivalant as per approved shade with with marble chips of specified sizes, laid in floors, treads of steps, ramp and landings on a bed of 25mm (Twenty five milimetres) thickness of cement mortar 1:6(One cement : six Sand) jointed with cement slurry mixed and pigment to match the shade of tiles (Wherever required) including rubbing and polishing Complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

50mm (Fifty millimetres) thick cement concrete flooring 1:2:4 (One cement : two sand : four graded/ crushed stone aggregate 20mm (Twenty millimetres) nominal size) mechanically mixed laid in one layer and finished with a floating coat of neat cement and curing complete upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, GST, malkana and all other taxes as imposed by the Government.

Providing and fixing 40mm (forty milimetres) wide and 4mm (four milimetres) thick glass strips in joints of flooring, as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying 25mm (twenty five milimetre) thick 300x300mm (three hundred into three hundred milimetre) Labrador Design (Rainbow series) tile of NTC Red sand stone slab/ unistone/ Ailastic in flooring is ramp for person with disablility and laid over 20mm (twenty milimetre) average thick base of cement mortar 1:4 (one cement isto four sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the stone including rubbing nosing moulding and poilsh finish complete. The stone shall be finished with rough polish to keep it non slippery and shall have wall mounted hand rail (DW-I-I) of KICH as per approved drawing, design and specifications, upto all floor levels, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 50mm (fifty milimetre) dia S.S.T. (Stainless steel) pipe rail slip resistant in ramp at two level i.e. 75cm (Seventy five centimetre) and 90 (ninety centimetre) height welded with 25mm (Twenty five milimetre)diameter stainless steel hollow pipe balusters embedded in cement concrete 60cm (sixty centimetre) centre to centre and jointed with electrical Gas welding at top alongwith hand rail of hollow stainless steel pipe of 50mm (fifty milimetres) diameter . It should extend 30cm (thirty centimetre) beyond top and bottom of the ramp, as per approved drawing, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST, malkana and all other taxes as imposed by the Government.

Providing and fixing 50mm (Fifty milimetres) dia SST (Stainless steel) pipe hand rail fixed with 35mm (Thirty five milimetre) dia stainless steel baluster as per detail in combination of 35mm (Thirty five milimetres) dia and 15/20mm (Fifteen obleque twenty milimetre) SST pipe baluster knock down railing of KICH hand rail fixed on 10x50mm (Ten into fifty milimetre) S.S. flat balusters placed at 1200mm (One thousand two hundred milimetre) centre to centre alongwith 3 numbers (Three numbers) at the rate of 16mm (Sixteen milimetre) mid rail connected at the side of the baluster with fixtures. The baluster would be fixed on the floor with casted base plate minimum 6mm (six milimetre) thick base plate shall be concealed with suitable S.S. 316 grade (Three hundred sixteen grade) cover cap the railing shall be made of Hollow tubes, channels, plates etcetera including welding, grinding, buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete as per approved drawing, design and the direction of Engineer-in-charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST, malkana and all other taxes as imposed by the Government.

Providing and fixing factory made ridges or hips 60 cm (sixty centimetre) overall having proper gola shape with 0.60mm (zero point six zero milimetre) thick ISI marked Z-120 prepainted steel sheet of Tata/Durashine /Reliance/Jindal steel in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetres) diameter with prepainted galvanized iron limpet and bitumen washers filled with required shade of colour and laid complete within all accessories as required upto any height as per approved drawing design and specification and futher as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Valley 90cm (Ninety centimetre) overall with 0.60mm (zero point six zero milimetre) thick ISI marked Z-120 (Z-one hundred twenty) prepainted steel sheet of Tata/Durashine Reliance/Jindal steel in roofing with hot dipped, metallic zinc coated steel sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted galvanized iron J or L hooks, bolts and nuts 6mm (six milimetres) diameter with prepainted galvanized iron limpet and bitumen washers filled with required shade of colour and laid complete within all accessories as required upto any height as per approved drawing, design and specification and futher as per the directions of the Engineer-in-Charge, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 0.60mm (zero decimal six zero milimeter) thick prepainted steel sheet Tata / Durashine/ Jindal steel/ Reliiance in roofing wih hot dipped matalic zinc coated sheet with tap coat of regular modified poly steel (RMP) organic coating of 20 (Twenty) micron over 5 (five) microns primer coating to back coat of polyster of 10 (ten) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six milimetre) diameter with prepainted limpet and rubber washers complete with all accessories as required including carriage of material within all leads, lifts and other incidentals and further as per specifications approved drawing design and as directed by the Engineer-in-Charge. The rate including, octroi royality malkana sale tax, toll tax, GST or any other taxes as imposed by the Government.

Providing and fixing 0.63mm (Zero point six three milimetre) thick plain galvanised iron sheet 30cm (thirty centimeter) wide 25cm (Twenty five centimetres) deep plain G.I. (Galvanised iron) sheet gutter having dome shape gratting of M.S. flat 5x5/6mm (five into five obleque six milimetre) incluing fiixing with bolts, nuts and washers etcetera and making necessary connections with rain water pipe complete as per design, drawing and specification, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing M,S.(mild steel) BP (Black plain) sheet 2mm ( two milimetre) thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per approved design, drawing and specification, as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured and paid separately), including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing flashing 38cm (thirty eight centimetre) overall with 0.60mm (zero point six zero milimetre) thick prepainted steel sheet of Tata Durashine / Sail /Reliance/ Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty microns) over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetre) diameter and prepainted G.I.(galvanised iron) limpet and bitumen washers complete as per approved drawing, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetre) diameter on wall face P.V.C. (D-Plast) rain water pipes of working pressure not less than 4.50 kg/Cm² (Four point five zero kilogram) per square centimetre ISI marked of finolex/ supreme / Prince / Relpipe(Reliance)/Vectus including filling the joints with approved adhesive and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana, GST and all other taxes as imposed by the Government.

Providing and fixing PVC plain bend 150mm (One hundred fifty milimetre) diameter on wall face PVC (D-plast) accessories of finolex/ supreme / Prince /Relpipe(Reliance)/Vectus for rain water pipes including filling the joints with approved adhesive complete, as per design and drawing and specification, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Shoe 150mm (One hundred fifty milimetre) diameter on wall face PVC (D-plast) of accessories finolex/ Relpipe (Reliance)/Vectus for rain water pipes including filling the joints with approved adhesive complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PVC clamps of approved design to PVC rain water pipe including cost of cutting holes and making good the wall etcetera as per approved drawing, design and specifications complete, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600x600mmx600mm (six hundred into six hundred millimetre into six hundred milimetre) everest fibre cement board ceiling panel fixed with prepainted G.I. (Galvanised iron) channel framing at the rate of 600mm (six hundred milimetre) centre to centre complete as per approved drawing, design and specifications , including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Steel work of TATA/SAIL welded in built up sections, trusses and framed work composed of beams joists, channels, angles, tees, flats and connecting plates of angle cleats etcetera as in trusses and trussed purlins, main and cross beams, hip and jack rafters purlins connected to common rafters and the like in building including cutting fixing, lifting hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HP:PWD. Specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surface under coat with enamel paint of Asian/Nerolac/ Berger paint of approved shade brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and as per approved drawing and specification, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Applying priming two or more coat over new steel and other metal surfaces with Nerolac/Asian/Berger paint after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and scaured with wire brushes fine steel wire screws complete brushing including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Applying priming two or more coat over new wood and wood based surfaces with Nerolac/ Asian /Berger paint after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint of Nerolac/ Asian/Berger paint of approved shade to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

6mm (Six milimetre) thick cement plaster to ceiling with cement mortar 1:3 (One cement isto three sand) for all floors level and curing complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:6 (One cement isto six sand) in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level, including arrises internal rounded angles, chamfers and/or rounded angle in all girth and finished even and smooth complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:6 (One cement isto six sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:5 (One cement isto five sand) in single coat on fair side of brick/ concrete/ stone walls for exterior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in all girth and finished even and smooth complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

20mm (Twenty milimetre) thick pattern in cement plaster/ Grooving with cement mortar 1:5 (one cement isto five sand) including scaffolding etcetera complete as per Architectural Drawings, design H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing Plinth protection with 40 mm (Forty milimetres) thick interlocking paver blocks of NTC and 23 cm (Twenty three centimetre) dia. Half round Reinforced cement concrete pipe for drainage purpose fixed over 10cm (ten centimetre) thick cement concrete 1:4:8 (One cement isto four sand isto eight graded) stone aggregate bedding/ haunching as per Architectural drawing ,design and specifications, or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 12mm (twelve milimetre) thick Unistone/ Atlantic tile clading on reinforced cement concrete surface side as on faces of Arch masonry walls etcetera on 12mm (twelve milimetre) thick cement plaster 1:3 (one cement isto three sand) and jointed with cement slurry including scaffolding etcetera complete as per Architctural drawing, design and specifications and as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Applying JK/ Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dirt, dust, loose material and other foreign matters and sand papered smooth to give final matter finish to the surface complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Finishing wall with Fine dune /Dune finish of NCL Alltek / Spectrum Textured wall finish Natural grit of Heritage having coating thickness 1.5mm (One point five milimetre) on undecorated wall surfaces to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etcetera including sand paper smooth complete as per Architectural drawing ,design and specification, and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Applying two or more coats of Acrylic Washable emulsion of Asian paints / Berger paints/ Dulux paints/Nerolac paints (above Dado/skirting) of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per Architectural drawing ,design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Wall painting (two or more coats) with Premium emulsion paint of Asian / Dulux /Berger paints/Nerolac paints (above Dado/skirting) of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth as per Architectural drawing ,design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Wall painting ( two or more coat) with Acrylic emulsion of Asian paints/Berger paints /Nerolac paints (above Dado/skirting) or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides, anti-rusting and foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per Architectural drawing ,design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Painting (two or more coats) with synthetic enamel paint of Asian/Nerolac / Berger paint in cup board cabinet work of approved brand and manufacture and of required shade on ceiling/ sloping roof surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including priming coat with distemper primer, as per approved drawing, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:2:4 (One cement isto Two Sand isto Four graded stone aggregate 20mm (Twenty milimetre) nominal size) and curing complete excluding cost of form work in: foundation and plinth as per Architectural drawing ,design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:3:6 (One cement isto Thee sand isto six graded stone aggregate 20 mm (Twenty milimetre) nominal size) and curing complete excluding cost of form workin: foundation and plinth as per Architectural drawing ,design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 60mm (sixty milimetre) thick heavy duty precast cement concrete inter locking paver blocks of NTC vibro completed upto M-50 (M-Fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (twenty five milimetre) thick average thickness of cement mortar 1:4 (one cement isto four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubing and polishing complete, with carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing polyethylene Aluminum polyethylene (PE-AL-PE) composite pressure pipesU.V. stabalized with carbon black and fittings of kitec confirming to IS 15450-2004 for water supply complete with necessary fittings including cutting fixing and making good the walls ceiling and floor of approved brand complete, as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.1620 (20mm (Twenty milimetres) outer diameter).

Providing and fixing polyethylene Aluminum polyethylene (PE-AL-PE) composite pressure pipesU.V. stabalized with carbon black and fittings of kitec confirming to ISI 15450-2004 for water supply complete with necessary fittings including cutting fixing and making good the walls ceiling and floor of approved brand complete, as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.2025 (25mm (Twenty five milimetre) outer diameter).

Making connections of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty milimetres to forty milimetres) bore by providing and fixing tee including cutting and threading the pipes complete, including entire carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes 4.00 to 4.6 mm (four to four point six milimetre) thick of Supreme Finolex/Vectus/Relience(relpipe) prince including fixing with approved adhesive etcetera complete, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

110mm (one hundred ten milimetre) nominal diametre

75mm (Seventy five milimetre) nominal diametre

Providing and fixing 110mm (One hundred ten milimetre) nominal bore/diameter P.V.C. clamps of Supreme /Finolex/ Reliance(relpipe) Prince fixing ISI marked including fixing with steel screws and rawal plugs etcetera complete, including carriage of materialwithin all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five milimetre) nominal bore/diameter P.V.C. clamps ISI marked of Supreme /Finolex/Reliance (Relpipe) prince fixing ISI marked including with steel screws and rawal plugs etcetera complete, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) nominal bore/diameter P.V.C. Supreme/ Finolex/ Relpipe(Reliance/ Heal Rest Confirming to IS No.14735-99 including filling the joints with approved adhesive, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five milimetre) nominal bore/diameter P.V.C. Supreme/Kitec/ Finolex/ Reliance (Relpipe) prince / Astral Heal Rest Confirming to IS No.14735-99 including filling the joints with approved adhesive, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing P.V.C. plain bend of Supreme/ Finolex/ Relpipe (Reliance)/ prince complete upto all floor level conforming to IS No.14735-99 including fitting the joints with approved adhesive and as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

110mm (One hundred ten milimetre) nominal bore/ diameter

75mm (Seventy five milimetre) nominal bore/ diameter

Providing and fixing 110 mm (One hundred ten milimetre) nominal bore/diameter ISI marked PVC Collar Supreme/prince / Finolex Relpipe (Reliance) as per HP:PWD. specifications and as directed by the Engineer-in-Charge, including fixing with approved adhesive complete, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75 mm ( Seventy five milimetres) nominal bore/diameter ISI marked PVC Collar Supreme/Vectus/ Finolex Relpipe (Reliance) as per HP:PWD. specifications and as directed by the Engineer-in-Charge, including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110 mm (one hundred ten milimetre) nominal diameter PVC Cowl ISI marked of Supreme/ Finolex/ Relpipe (Reliance)/ Prince , including fixing with approved adhesive and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75 mm (seventy five milimetre) nominal diameter PVC Cowl ISI marked of Finolex/ Relpipe (Reliance)/ Prince/Supreme, including fixing with approved adhesive and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 110x90mm (one hundred ten into ninety milimetres) P.V.C. floor trap of Finolex/ Relpipe (Reliance)/ Prince/Supreme of self cleaning design complete including fixing with approved adhesive including cost of cutting and making good the walls and floors etcetera complete and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 110x75mm (one hundred ten into seventy milimetres) P.V.C. floor trap of Finolex/ Relpipe (Reliance)/ Prince/Supreme of self cleaning design complete including fixing with approved adhesive including cost of cutting and making good the walls and floors etcetera complete and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetres) dia PVC P or S trap of Finolex/ Relpipe (Reliance)/ Prince/Supreme for vitreous china wash down water closet squatting pan (Indian type W.C. pan) Orrissa patlern including fixing with approved adhsesive and carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST malkana and all other taxes as imposed by the Government.

Providing and fixing vitreous china wash down, water closet squatting pan (Indian type W.C. pan) Orissa pan No.20090 of size 530mmx410mm (five hundred thirty milimetre into four hundred ten milimetre) of Hindware/ Cera/ Jaquar of white shade (earth work, bed concrete, foot rest and trap to be measured and paid for separtely) as per Architectural drawing, design and specifications, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST malkana and all other taxes as imposed by the Government.

Providing and fixing Vitreous china wash down water closet of size 57x35x39cm (fifty seven into thirty five into thirty nine centimetre) of star No.20087(5-10) (Europen type W.C. pan) of HIND WARE/ CERA / Jaquar of star white/ snow white shade with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement isto One sand) (seat and cover to be measured and paid for separately), including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Vitreous china wash down water closet matrix of Hindware Cera/Jaguar of Star white / snow white shade with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) (Seat cover, Jet Spray) (earth work, bed concrete, foot rest and trap to be measured and paid for separtely) as per Architectural drawing, design and specifications, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing to wall ceiling and floor high density PVC polyethylene/ poly propylene 10 litres (Ten litres) capacity (Dual flush) European standard control low level flushing cistern (Sleek plus) of Hindware/Cera/Jaquar of star white/ snow white shade with fittings such as a pair of brackets lead valve, syphon, 15mm (Fifteen milimetre) nominal size PVC ball valve with polythene float with push button couplings for connections, with inlet, outlet and over flow pipe, 40mm (Forty milimetres) dia C.P. flush bend with cistern and closet (overflow pipe to be measured and paid for separtely) as per per Architectural drawings, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST malkana and all other taxes as imposed by the Government.

Providing and fixing G.I. (galvanised iron) inlet connection pipe for each flush pipe with W.C. pan, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing solid type white shade plastic seat and cover for wash down water closet of Hindware /Cera/ Jaquar with C.P. brass hinges and rubber buffers including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Vitreous china wash basin Neptune No.10072 of HIND WARE/CERA/Jaquar 550x480mmx860mm (five hundred fifty into four hundred eighty into eight hundred sixty milimetre) with pedestal and with mirrior above of star white/snow white shade with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding the cost of fittings, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Vitreous china under counter wash basin Garnet No. 10080 and Tap shall be Elbroey/fort operated of HIND WARE/CERA JAQUAR 580x430mm (five hundred eighty into four hundred thirty milimetres) without pedestal with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding the cost of fittings, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Vitreous china wash basin 580x430mm (five hundred eihty into four hundred thirty milimetres) Matrix of HIND WARE/CERA Jaquar of star white/ snow white shade with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding the cost of fittings, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Hind ware/ Cera /Jaquar snow white shade vitreous china Urinal large flat back No.60002 of size 39x37.5x59cm (thirty nine into thirty seven point five into fifty nine centimetres) auto flush including connection the urinal with waste pipe by means of white lead mixed with chopped hamp (waste pipe to be measured and paid for separtely) as specified as per the directions of the Engineer-in-Charge upto all floor level, including carriage of material within all leads, lifts and other incidentals charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked stainless steel kitchen sink of diamond big size 610x510x200mm (six hundred ten into five hundred ten into two hundred milimetre) of approved make with drain board and C.P waste with C.I. or mild steel brackets painted white including cutting holes and making good the same but excluding fittings complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Heavy Duty 32mm (Thirty two milimetre) diameter ISI marked is No.8931 7893 rubber plug for sink or wash basin, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 45cm (Forty five centimetre) long and 15mm (Fifteen milimetre) nominal bore PVC connections pipe with brass unions, complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked Mixer for Kitchen sink with casted swinging spout at top complete as per direction of the Engineer-in-Charge, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) diameter P.V.C. waste for wash basin or sink, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing two hole basin mixing Faucet, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) dia chromium plated grating of continental series of Jaquar / contess plus series of Hindwere / oceam of cera / vintage series of kerovite / Hindon series of Jal superior quality for floor, gully or Nahni trap complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetre) nominal bore/diameter (to level or slopes) PVC pipes grade 'A' of Supreme/Kitec/Finolex/Prince and jointing with approved adhesive including testing of pipes and jointing complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600mmx450mm (Six hundred millimetres into four hundred fifty millimetre) Bevelled edge mirror of superior glass mounted on 6mm (Six milimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers, complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600mmx20mm (Six hundred milimetre into twenty milimetre) C.P. brass towel rail of continental series of Jaquar / contessa plus series of Hindwere / ocean series / vintage series of kerovite / Hindon series of Jal with C.P. brass brackets fixed to wooden plugs with C.P. brass screws, complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing plastic liquid soap container with C.P. brass lid and bracket fixed to wooden plugs with C.P. brass screws, complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing chromium plated brass toilet paper holder of continental series of Jaquar / contess a plus series of Hindwere / ocean series of cera / vintage series of kerovite / Hindon series of Jal approved brand and manufacture of Jal complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing C.P. Jet spray make of continental series of Jaquar / contessa plus series of Hindwere / ocean series of cera / vintage series of kerovite / Hindon series of Jal with 1.5metre (One point five metre) tube complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing chromium plated brass bib tap continental series of Jaquar / contessa plus series of Hindware/ocean series of cera / vintage series of kerovite / Hindon series of Jal 15mm (Fifteen millimetre) diameter with capstan head superior type complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diameter C.P. brass stop cock of continental series of Jaquar / contessa plus series of Hindware / ocean series of cera vintage series of kerovite / Hindon series of Jal complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) diameter C.P. brass pillar tap with capstan head of continental series of Jaquar / contessa plus series of Hindware / ocean series of cera / vintage series of kerovite / Hindon series of Jal complete, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (fifteen milimetre) diametre PTMT push cock tap complete, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) C.P. brass angle valve of continental series of Jaquar / contessa plus series of Hindware/ocean series of cera / vintage series of kerovite / Hindon series of Jal without nuts and pipes complete, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore brass full way valve with wheel complete, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore C.P. brass valve (Horizontal plunger) type High Pressure with polythene plastic floats of continental series of Jaquar / contessa plus series of Hindware/ ocean series of cera / Hindon series of Jal / Vintage series of Kerovite including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm(Thirty two) Nominal diametres C.P waste of continental series of Jaquar / contessa series of Hindware/ ocean series of Cera/Vintage series of Kerovite/ Hindon series of Jal pipe for wash basin or sink including brass check nut complete upto all floor level as per HP PWD specification including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing P.V.C single equal branch with oval access door of Finolex/Relpipe (Reliance)/ Supreme/ Vecuts, ISI marked insertion rubber washer 3mm (Three milimetre) thick bolts and nuts complete , including fixing with approved adhesive and carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

110mm dia (One hundred ten milimetre) diameter

110mm dia (One hundred ten milimetre) diameter

Providing and fixing 110mm (One hundred ten milimetre) diameter P.V.C. double equal branch with oval access door,of finolex / relpipe (reliance) / Vectus/ Supreme ISI marked insertion rubber washer 3mm (Three milimetre) thick bolts and nuts complete including fixing with approved adhesive, and carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five milimetre) diametre P.V.C. double equal branch with oval access door,of finolex / relpipe (reliance) / Vectus/ Supreme insertion rubber washer 3mm (Three milimetre) thick bolts and nuts ISI marked including fiixing with approved adhesive, and carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) diameter PVC door bend with oval access door of finolax / relpipe /Reliance/ vectus/ Supreme insertion rubber washer 3mm (three millimetres) thick bolts and nuts ISI marked complete incuding finishing with approved adhesive etcetera including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (Seventy five milimetre) diameter PVC door bend with oval access door of finolax / relpipe /Reliance/ vectus/ Supreme insertion rubber washer 3mm (three millimetres) thick bolts and nuts ISI marked complete incuding fixing with approved adhesive etcetera including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) diameter PVC offset 45ᵒ (Forty five degree) ISI marked of Finolex/ Relpipe (Relaince)/ Vectus/Supreme including fixing with approved adhesive etcetera, and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five milimetre) diameter PVC offset 45ᵒ (Forty five degree) ISI marked of finolex / relpipe/ reliance/ Vectus including fixing with approved adhesive etcetera, and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and placing three layered PVC water storage tank of ISI marked 12701 (SINTEX / Supreme/Finolex of 1000 litres (One thousand litres) capacity Tripple layer complete in all respect with necessary fittings and mosquito proof coupling of approved design 15mm (Fifteen milimetres) nominal bore ball valve with polythene float overflow pipe, scour pipe and PVC cover with locking arrangement including providing pads of size as required including hoisting upto any height, and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight graded stone aggregate 40mm (Forty milimetre) nominal size) for the bedding of P.V.C. pipes of 150mm (one hundred fifty milimetre) diameter with necessary form work and curing complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:3:6 (One cement isto three sand isto six graded crushed stone aggregate 40mm (Forty millimete) nominal size) in haunching of PVC pipes of 150mm (One hundred fifty milimetre) internal diameters, including concrete for bedding necessary form work and curing complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing vitreous China pedestal of Hindware/Cera/Jaquar for wash basin complete recessed at the back for the reception of pipes and fittings, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600x120mm (six hundred into one hundred twenty milimetre) glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws, complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Tooth brush and Tumbler holder (Vitreous China) of Jaguar/Cera/ Hindware complete with all accessories, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Constructing mainhole with R.C.C. top slab in cement concrete 1:2:4 (One cement isto two sand isto four graded stone aggregate 20mm (Twenty milimetre) nominal size) mix foundation concrete 1:4:8 (One cement : four sand :eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One cement three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) finished smooth complete including curing and testing (a) inside size 800x800x500mm (eight hundred into eight hundred into five hundred milimetre) and upto any depth and including C.I. cover with frame (light duty single seal pattern-1) 455x610mm (Four hundred fifty five into six hundred ten milimetre) internal diamension the total weight of cover and frame to be not less than 38kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15 kg (Fifteen kilogram) with 200mm (Two hundred milimetre) thick wall of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement : three sand), including carriage of material within all leads, lifts, and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Constructing mainhole with R.C.C. top slab in cement concrete 1:2:4 (One cement : two sand :four graded stone aggregate 20mm (Twenty milimetre) nominal size) mix foundation concrete 1:4:8 (One cement : four sand :eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One cement three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) finished smooth complete including curing and testing (a) inside size 800x800x1000mm (eight hundred into eight hundred into one thousand milimetre) and upto any depth and including C.I. cover with frame (light duty single seal pattern-1) 455x610mm (Four hundred fifty five into six hundred ten milimetre) internal diamension the total weight of cover and frame to be not less than 38kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15 kg (Fifteen kilogram) with 200mm (Two hundred milimetre) thick wall of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement : three sand), including carriage of material within all leads and lifts, and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Constructing brick masonry chamber for under ground cast iron inspection chamber and bends with second class common burnt clay building, bricks in cement mortar 1:5 (One cement : five sand) cast iron cover with frame (light duty) 455mmx610mm (four hundred fifty five milimetre into six hundred ten milimetre) internal dimensions total weight of cover with frame to be not less than 38 kgs (Thirty eight kilogram) (weight of frame 15 kgs. (Fifteen kilogram) and weight of cover 23 kgs. (Twenty three kilogram) with reinforcement cement concrete top slab 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (Twenty milimetre) nominal size) foundation concrete 1:5:10 (One cement : five sand : ten graded stone aggregate 40mm (Forty milimetre) nominal size) in side plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One cement : three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete. In side dimensions 455mmx610mmx450mm (Four hundred fifty five milimetre into six hundred ten milimetre into four hundred fifty milimetre) deep single pipe line complete as per the direction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing composite end seal compression fittngs as per IS-15450-2004 for cold water supply e.g. tees, elbow, reducers, connectors, couplers and clamps etcetera of Kitee/supreme/Finolex with jointing testing and fittings complete including cutting and making good the walls etcetera, including carriage of materialwithin all leads and lifts. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Equal tee (1620)

Equal tee (2025)

Female elbow (1620x15mm thread) (One thousand six hundred twenty into fifteen milimetre) thread

Female elbow (1620x20mm thread) (One thousand six hundred twenty into twenty milimetre) thread

Female elbow (2025x25mm thread) (Two thousand twenty five into twenty five milimetre) thread

Female branch tee (1620x1620x20mm thread ((One thousand six hundred twenty into one thousand six hundred twenty into twenty milimetres) thread

Female branch tee(2025x2025x25 mm thread

Male thread connector (1620x15mm thread (One thousand six hundred twenty into fifteen milimetres) thread

Male thread connector (2025x25mm thread (Two thousand twenty five into twenty five milimetres) thread

Reducing Tee 1620x all branches (One thousand six hundred twenty into all branches)

Reducing Tee 2025x all branches (two thousand twenty five into all branches)

Coupler 1620 (One thousand six hundred twenty)

Coupler 2025 (Two thousand twenty five)

Reducer 1620x1216 (One thousand twenty into one thousand sixteen)

Reducer 2025x1216 (Twe thousand twenty five into one thousand two hundred sixteen)

Reducer 2025x1620 (Two thousand twenty five into one thousand six hundred twenty)

Providing and fixing composite end seal compression fittngs as per IS-15450-2004 for Hot water supply e.g. tees, elbow, reducers, connectors, couplers and clamps etcetera of Kitee/supreme/ Finolex with jointing testing and fittings complete including cutting and making good the wall etcetera as per the direction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Equal tee 1620 (one thousand six hundred twenty)

Equal tee 2025 (two thousand twenty five)

Female elbow 1620x15mm thread (one thousand six hundred twenty into fifteen milimetre thread)

Female elbow 1620x20mm thread (one thousand six hundred twenty into twenty milimetre thread)

Female elbow 2025 X 25 mm therad

Female branch tee (1620x1620x20mm thread (One thousand six hundred twenty into one thousand six hundred into twenty milimetres) thread

Female branche tee ( 2025X2025X25mm thread)

Male thread connector (1620x15mm thread (One thousand six hundred twenty into fifteen milimetres) thread

Male thread connector (2025x25mm thread (Two thousand twenty five into twenty five milimetres) thread

Reducing Tee 1620x all branches (One thousand six hundred twenty into all branches)

Reducing Tee 2025x all branches (two thousand twenty five into all branches)

Coupler 1620 (One thousand six hundred twenty)

Coupler 2025 (Two thousand twenty five)

Reducer 1620x1216 (One thousand six hundred twenty into one thousand two hundred sixteen)

Reducer 2025x1216 (Two thousand twenty five into one thousand two hundred sixteen)

Reducer 2025x1620 (Two thousand twenty five into one thousand six hundred twenty)

Providing and fixing Hindware/Cera/Jaquar of star white/ snow white shade make Vitreous China Division plate for Urinals of size 600x300mm (six hundred into three hundred milimetre) with necessary screws complete, as specified, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 15mm fifteen milimetres) Nominal bore in trenches, galvanised mild steel tube,( medium grade) ,tube fittings ( earth work in trenches to be measured and paid separately) complete as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Chromium plated 40mm (forty milimetre) dia steel pipe for grab bars at 78cm (seventy eight centimetres) height as per details at the position of the seat and wash basin complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 20mm (twenty milimetres) Nominal bore to wall ceiling and floor galvanised mild steel tube,( medium grade), tube fittings and clamps including making good the wall ceiling and floor complete as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Supplying and fixing cast iron cover with rectangle frame 445 x 610 mm (Four hundred forty five into six hundred ten milimetres) (light duty) single seal pattern of the weight of cover to be not less than 23 kg. (Twenty three kilogram) as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing 200 mm (Two hundred milimetres) wide cast iron rugs with chequered or rubbed non slip surface including fixing in man holes with 200x200x100 mm (Two hundred into two hundred into one hundred milimetres) cement concrete 1:3:6 (one cement isto three sand isto six graded /crushed stone aggregate) 20 mm (Twenty milimetres) nominal size, as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government

Brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (One cement isto six sand) second class bricks, as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government

Providing and laying brick bat filling in soak pit, as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government

15mm (Fifteen milimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty milimetres) in girth and finished even and smooth Cement mortar(1:3) (One cement isto three sand) as per HPPWD specifications or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, GST, malkana and all other taxes as imposed by the Government.

Applying cement slurry on Reinforcement Cement concrete slab or cement concrete work using 2.75 kgs. (Two point seventy five Kilogram) Of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete as per HP. PWD specifications excluding cost of centring and shuttering or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, GST, malkana and all other taxes as imposed by the Government.

Second class brick work using common burnt clay building bricks in super structure above plinth level upto all heights/ floor level in cement mortar 1:4(One cement isto four sand) and curing complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, GST, malkana and all other taxes as imposed by the Government.

Providing and laying 40 mm (forty millimeter) thick cement concrete flooring 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (Twenty milimetres) nominal size) laid one layer finished with a floating coat of neat cement. including preparation of surface grading complete as per the instruction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, GST, malkana and all other taxes as imposed by the Government.

20 mm (Twenty milimetres) cement plaster in two coat backing coat 10 mm (Ten milimetres) and finishing coat 10 mm (ten milimetres) thick on fair side of brick/stone masonary walls for interior plastering up to floor two level including aamses internal rounded angle chamfers and or rounded angle. Cement mortar 1:4 (One cement : four sand) as per the instruction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, GST, malkana and all other taxes as imposed by the Government.

Providing and fixing 1.00 HP (one horse power) water lifting pump ISI marked of Kirloskar / Cromption including accessories and making necessery connection as required at site for its functioning complete, or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, GST, malkana and all other taxes as imposed by the Government.

suresh kumar gupta