Providing Tower Model AC Units to the Kalyanotsava mandapam at Sri Kalaya Venkateswara Swamy Temple, Srinivasamangapuram in ESD - SBH, Tirupati

Supply of Slim line / Tower Model/Verticool type 3.0/ 3.3TR Three Phase capable of delivering 39600 BTU/hr and above with operating on refrigerant R-32/R-410. split AC unit with indoor unit and floor mounted outdoor condensing unit with 3.5 mtr of copper piping, insulation kit and 4 mtr of 4 core copper flexible card with refrigerant 410A/R32, Hermetically sealed Scroll compressor suitable for operation on AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units etc complete with cordless remote control Makes: Carrier /Daikin / Blue Star

Installation of Tower type Split Air Conditioners.

Supply of 1.9 TR, 4 Star Inverter Model Cool Type split AC unit with high wall mounted single split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, single phase AC supply capable of performing with cooling and condensing units with 3 Mtrs. of copper piping, insulation kit and 4 Mtrs. of 1.5 / 2.5 Sq.mm 3 / 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil from oxidization. Make: Mitsubishi, / Toshiba / 'O' General

Technical Specifications: Type of AC unit: Split Type Inverter, Tonnage Capacity (TR): 1.90, Cooling Capacity (KW): 6.6 Rated (Min-Max): 1.5 - 7.2, Power Consumption: 1.83, Power Supply: 230V AC, 50Hz, Star Rating: > 4Star, ISEER: > 4.65, Air flow (CFM): 240-603, Indoor Noise Level (dB(A)): 29-49, Refrigerant piping Size (Copper) Gas / Liquid (mm / inch): 6.35 (1/4) / 12.7 (1/2), Type of Condenser: Rotary / Swing / hyper Tropical / Twin Rotary, Refrigerant: R 32, Warranty: Defect Liability Period (DLP): 5 years (60 months) from the date of Installation, as a whole, where in all the defects shall be rectified by the contractor at his cost with all materials, labour etc., complete.

Supplly of 5 KVA Stabilizer. Makes: V-Guard

Installation of Split Air Conditioners

Supply, Fabrication of 1 set MS bracket suitable for fixing out door unit of split AC unit.

Providing 2 runs of 1/2" x 1/4" Copper tubes for suction and liquid between indoor and outdoor unit for split / Cassette Air-Conditioner including foaming etc., complete.

Supply and Fixing of ISI Mark 25 mm outer dia medium grade(1.80mmthickness)withIS:9537part-3P.V.C. pipe with allaccessories fixing on chromiumplated metallic base saddles for surface wiring on Brick /stonewalls, RCCroofings, Trusses, channels including all labour charges etc.,complete.(If PVC Pipes are fixed onTrusses/Channels with MSClamps,the rate for MS Clamps will be paid Separately) Makes:Sudhakar/ Finolex/Polycab/ Kumar/ AKG /Indiantubes/ GM/Anchor/ Nandi /Polyline/Goldmedal

Supply and run of 3 wire of 84/0.3mm (6.0Sqmm) PVC insulated flexible FRLS copper cable as per IS:694/1990 specificationin the existing PVC pipe /MSpipe/ PVC Trunking for mains including all labour charges etc., complete. Grade-A:Make:Finolex/RRkabel/ Havells/KEI/Polycab / L&T

Supply of 75 mm dia 3mtr single socket PVC/SWR Pipes and fittings ( as per ISI standards ) 6 Kgs/Sq.Cm Makes:Prince/Sudhakar/Kissan/SupremeoranyISIbrand UPVC SWR pipe fittings (as per ISI standards )

Supply Laying and Transportation of Outerdia78mm and inner dia63mm,6Kg/Sq.Cm(PE-100grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make:DURALINE(DuraGuard)/Precision/CPEoritsequivalent make.

Supply of 65 mm dia G.I. pipes of "B" class as per IS 1239 marked . Make: Jindal / Appollo / TATA.

Providing of Independent Chemical Earthing after excavating an earth pit of size 1.5mX0.9mX2.05m(Top1.50mX0.90mX0.9m&bottom1.20mX0.90 m X 1.15 m) with the following specification:- (a)The Earth Electrodes, 40mmdia, wallthickness 3.25mm,terminalSize25x8mm,terminalholedia12mm,2meterlong, galvanized, including 1bag (25Kg to a bag)of Earth Life Compound, as per IS3043,Base Metal:IS marked branded mild steel pipes. Makes:Potential/ShakeHands/Mars/Tirumala/Arshlok earthing.

b)The Earth Electrode shall be inserted into the ground for 1.75Mtrs. Below the inspection chamber bottom 300mm all around this Earth Electrode shall be covered with 25 Kgs. Of Earth Life Compound. (c)Theexcavatedgapshallbebackfilledwithexcavatedearth,andshallbeproperlyconsolidatedwithwater. (d)The top 0.25m of Earth pipe shall be exposed into inspection chamber of Humepipe. The all around in spection chamber shall be provided with 18"dia hume pipe. Earth connections shall be given to the Earth Electrodes with bolts, nuts & washers.

(e)A 65mm dia PVC conduitis to beembedded through humepipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth ,the pitentry PVC conduitis to besealed with Bitumen compound. (f)Necessary Meggar testingis to be doneinthe presence of the concerned Engineers, and there ading should be as per IE standards.

Supply and run of 25mmX3mm G.I Strip for earth electrode to required places by concealing in walls, flooring by cutting the grooves and replastering neatly and giving necessary connection with 3/8"x2"GI Bolts, Nuts and Washers wherever joints has to be done. Thes trip has to bee ither riveted (or) bolted (or)gas welding neatly and all labour charges etc., complete.

Supply and transportation of 50 SqmmX 3.5 core XLPE insulated,1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A:Make : Torent/ Universal/ Unistar/ Havells/ KEI/ Gloster/Polycab /RRKabel/ Finolex/ FortuneArrt

Laying of U.Gcablesupto 50 Sq.mm with sand cushion covering the cable with brick sand back filling of Trench including cost and conveyance of materials and labour charges etc., complete.

Supply and making endtermination with heavy Alluminiumlugs (pin/ringtype) as per IS specification duly crimped with crimping tool, PVC tape etc of following size 50 Sqmm. Makes:Dowels/Jainson/Comet

Supply and making one end termination with heavy duty single compression brass gland as per BS6121:2005, IP66complete, SIBGtype, heavy duty Alluminium lugs duly crimped with crimping tool,PVC tape etc for 3.5 coreX50 Sqmm size of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size . Makes:Dowels/Comet/SMI

Supply and fixing of fabricated M.S clamps made out of 25mmx3mm MS flat with necessary holes on either side with suitable 11/2"coach screws and painting 2 coats of enamel black paint over one coat of redoxide suitable for fixing of UG Cables of size 25Sq.mm to 50Sq.mm on walls etc.,including all labour charges etc.,complete.

Earth Work excavation for trench for laying of U.G.Cable in ordinary rock( not requiring blasting)to there quired widt hand depth and depositing the same on bank as directed during execution etc., complete .

Cutting open cement concrete road

Cement concrete using 20mm HBG meta lin CC1:3:6 laid in Layers of not more than 15cms thick well compacted including curing cost and conveyance of materials etc., complete.

Plastering in CM(1:6) with 12mm thick using river sand including curing, conveyance of materials etc.,

Supply and fixing of 8Way VTPN D.Bs suitable for accomodating 125A/160A 4Pole MCCB as incomer and TP/SP MCBs as outgoing withIP-43 protection as perIS8623;IS13032;IEC61439-3. (Metaldoor) firmly on the surface of the wall etc., complete. [Excluding Incomer & Outgoings ] Grade-A:Makes:Legrand(Ekinox3)/Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T-Newrang/Indo Asian(Opti Pro)

Supply and fixing of 40to63 Amps range TP MCBs 10KA breaking capacity'C'/'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A:Makes:Legrand(Ekinox3)/Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 125A Triple Pole MCCB adjustable confirms to IEC:60947-2 and IS:13947 Part-1&2 having Breaking Capacity 25KA, with thermal magnetic release in the existing board including in ternal connections and Labour charges etc., complete. Grade-A:Makes:Legrand(Ekinox3)/Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T-Newrang / Indoasian (Opti Pro)

Supply of 4 core, 4.0 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V conforming to IS 694:2010. Makes: As per list of recommended brands as category I Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million/Sudhakar/Orbit/Batra Henlay/Salzer.

Supply of 205 X 255 X112 Sizes thermo-plastic cable junction boxes with IP66/67 weatherproof, for outdoor installation with knockouts for cable entry including terminals etc., complete (sizes in mm). Make : Hensel/Sadhrish

Supply and fixing of sheet steel enclosure with IP20 Protection as per IS 8623;IS 13032;IEC 61439-3 suitable for DP/TP/FP MCBs firmly on the surface of the wall etc., complete. Grade-A:Makes:Legrand(Ekinox3)/Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T/ Newrang / Indoasian (Opti Pro)

Supply and fixing of 40to63 Amps range TP MCBs 10KA breaking capacity'C'/'D' Curve ISI Mark as perIS:60898-1:2002 in the existing board and giving necessary connections. Grade-A:Makes:Legrand(Ekinox3)/Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 20 Amps 2Pin & Earth Socket Metal Plug Board with 1 No.20 Amps SPMCB 10KA'C' series ISI Mark including the cost of MCB on Surface of the wall and giving necessary connections. Grade-A:Makes:Legrand(Ekinox3)/Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 6to32 Amps range SPMCBs 10KA breaking capacity 'C'/'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A:Makes:Legrand (Ekinox3)/ Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T-Newrang / Indoasian (Opti Pro)

(Rupees Seventeen Lakh Sixty Three Thousand Four Hundred Seventy Six and Paise Nineteen only)

Supply of Slim line / Tower Model/Verticool type 3.0/ 3.3TR Three Phase capable of delivering 39600 BTU/hr and above with operating on refrigerant R-32/R-410. split AC unit with indoor unit and floor mounted outdoor condensing unit with 3.5 mtr of copper piping, insulation kit and 4 mtr of 4 core copper flexible card with refrigerant 410A/R32, Hermetically sealed Scroll compressor suitable for operation on AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units etc complete with cordless remote control Makes: Carrier /Daikin / Blue Star

Installation of Tower type Split Air Conditioners.

Supply of 1.9 TR, 4 Star Inverter Model Cool Type split AC unit with high wall mounted single split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, single phase AC supply capable of performing with cooling and condensing units with 3 Mtrs. of copper piping, insulation kit and 4 Mtrs. of 1.5 / 2.5 Sq.mm 3 / 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil from oxidization. Make: Mitsubishi, / Toshiba / 'O' General

Technical Specifications: Type of AC unit: Split Type Inverter, Tonnage Capacity (TR): 1.90, Cooling Capacity (KW): 6.6 Rated (Min-Max): 1.5 - 7.2, Power Consumption: 1.83, Power Supply: 230V AC, 50Hz, Star Rating: > 4Star, ISEER: > 4.65, Air flow (CFM): 240-603, Indoor Noise Level (dB(A)): 29-49, Refrigerant piping Size (Copper) Gas / Liquid (mm / inch): 6.35 (1/4) / 12.7 (1/2), Type of Condenser: Rotary / Swing / hyper Tropical / Twin Rotary, Refrigerant: R 32, Warranty: Defect Liability Period (DLP): 5 years (60 months) from the date of Installation, as a whole, where in all the defects shall be rectified by the contractor at his cost with all materials, labour etc., complete.

Supplly of 5 KVA Stabilizer. Makes: V-Guard

Installation of Split Air Conditioners

Supply, Fabrication of 1 set MS bracket suitable for fixing out door unit of split AC unit.

Providing 2 runs of 1/2" x 1/4" Copper tubes for suction and liquid between indoor and outdoor unit for split / Cassette Air-Conditioner including foaming etc., complete.

Supply and Fixing of ISI Mark 25 mm outer dia medium grade(1.80mmthickness)withIS:9537part-3P.V.C. pipe with allaccessories fixing on chromiumplated metallic base saddles for surface wiring on Brick /stonewalls, RCCroofings, Trusses, channels including all labour charges etc.,complete.(If PVC Pipes are fixed onTrusses/Channels with MSClamps,the rate for MS Clamps will be paid Separately) Makes:Sudhakar/ Finolex/Polycab/ Kumar/ AKG /Indiantubes/ GM/Anchor/ Nandi /Polyline/Goldmedal

Supply and run of 3 wire of 84/0.3mm (6.0Sqmm) PVC insulated flexible FRLS copper cable as per IS:694/1990 specificationin the existing PVC pipe /MSpipe/ PVC Trunking for mains including all labour charges etc., complete. Grade-A:Make:Finolex/RRkabel/ Havells/KEI/Polycab / L&T

Supply of 75 mm dia 3mtr single socket PVC/SWR Pipes and fittings ( as per ISI standards ) 6 Kgs/Sq.Cm Makes:Prince/Sudhakar/Kissan/SupremeoranyISIbrand UPVC SWR pipe fittings (as per ISI standards )

Supply Laying and Transportation of Outerdia78mm and inner dia63mm,6Kg/Sq.Cm(PE-100grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make:DURALINE(DuraGuard)/Precision/CPEoritsequivalent make.

Supply of 65 mm dia G.I. pipes of "B" class as per IS 1239 marked . Make: Jindal / Appollo / TATA.

Providing of Independent Chemical Earthing after excavating an earth pit of size 1.5mX0.9mX2.05m(Top1.50mX0.90mX0.9m&bottom1.20mX0.90 m X 1.15 m) with the following specification:- (a)The Earth Electrodes, 40mmdia, wallthickness 3.25mm,terminalSize25x8mm,terminalholedia12mm,2meterlong, galvanized, including 1bag (25Kg to a bag)of Earth Life Compound, as per IS3043,Base Metal:IS marked branded mild steel pipes. Makes:Potential/ShakeHands/Mars/Tirumala/Arshlok earthing.

b)The Earth Electrode shall be inserted into the ground for 1.75Mtrs. Below the inspection chamber bottom 300mm all around this Earth Electrode shall be covered with 25 Kgs. Of Earth Life Compound. (c)Theexcavatedgapshallbebackfilledwithexcavatedearth,andshallbeproperlyconsolidatedwithwater. (d)The top 0.25m of Earth pipe shall be exposed into inspection chamber of Humepipe. The all around in spection chamber shall be provided with 18"dia hume pipe. Earth connections shall be given to the Earth Electrodes with bolts, nuts & washers.

(e)A 65mm dia PVC conduitis to beembedded through humepipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth ,the pitentry PVC conduitis to besealed with Bitumen compound. (f)Necessary Meggar testingis to be doneinthe presence of the concerned Engineers, and there ading should be as per IE standards.

Supply and run of 25mmX3mm G.I Strip for earth electrode to required places by concealing in walls, flooring by cutting the grooves and replastering neatly and giving necessary connection with 3/8"x2"GI Bolts, Nuts and Washers wherever joints has to be done. Thes trip has to bee ither riveted (or) bolted (or)gas welding neatly and all labour charges etc., complete.

Supply and transportation of 50 SqmmX 3.5 core XLPE insulated,1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A:Make : Torent/ Universal/ Unistar/ Havells/ KEI/ Gloster/Polycab /RRKabel/ Finolex/ FortuneArrt

Laying of U.Gcablesupto 50 Sq.mm with sand cushion covering the cable with brick sand back filling of Trench including cost and conveyance of materials and labour charges etc., complete.

Supply and making endtermination with heavy Alluminiumlugs (pin/ringtype) as per IS specification duly crimped with crimping tool, PVC tape etc of following size 50 Sqmm. Makes:Dowels/Jainson/Comet

Supply and making one end termination with heavy duty single compression brass gland as per BS6121:2005, IP66complete, SIBGtype, heavy duty Alluminium lugs duly crimped with crimping tool,PVC tape etc for 3.5 coreX50 Sqmm size of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size . Makes:Dowels/Comet/SMI

Supply and fixing of fabricated M.S clamps made out of 25mmx3mm MS flat with necessary holes on either side with suitable 11/2"coach screws and painting 2 coats of enamel black paint over one coat of redoxide suitable for fixing of UG Cables of size 25Sq.mm to 50Sq.mm on walls etc.,including all labour charges etc.,complete.

Earth Work excavation for trench for laying of U.G.Cable in ordinary rock( not requiring blasting)to there quired widt hand depth and depositing the same on bank as directed during execution etc., complete .

Cutting open cement concrete road

Cement concrete using 20mm HBG meta lin CC1:3:6 laid in Layers of not more than 15cms thick well compacted including curing cost and conveyance of materials etc., complete.

Plastering in CM(1:6) with 12mm thick using river sand including curing, conveyance of materials etc.,

Supply and fixing of 8Way VTPN D.Bs suitable for accomodating 125A/160A 4Pole MCCB as incomer and TP/SP MCBs as outgoing withIP-43 protection as perIS8623;IS13032;IEC61439-3. (Metaldoor) firmly on the surface of the wall etc., complete. [Excluding Incomer & Outgoings ] Grade-A:Makes:Legrand(Ekinox3)/Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T-Newrang/Indo Asian(Opti Pro)

Supply and fixing of 40to63 Amps range TP MCBs 10KA breaking capacity'C'/'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A:Makes:Legrand(Ekinox3)/Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 125A Triple Pole MCCB adjustable confirms to IEC:60947-2 and IS:13947 Part-1&2 having Breaking Capacity 25KA, with thermal magnetic release in the existing board including in ternal connections and Labour charges etc., complete. Grade-A:Makes:Legrand(Ekinox3)/Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T-Newrang / Indoasian (Opti Pro)

Supply of 4 core, 4.0 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V conforming to IS 694:2010. Makes: As per list of recommended brands as category I Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million/Sudhakar/Orbit/Batra Henlay/Salzer.

Supply of 205 X 255 X112 Sizes thermo-plastic cable junction boxes with IP66/67 weatherproof, for outdoor installation with knockouts for cable entry including terminals etc., complete (sizes in mm). Make : Hensel/Sadhrish

Supply and fixing of sheet steel enclosure with IP20 Protection as per IS 8623;IS 13032;IEC 61439-3 suitable for DP/TP/FP MCBs firmly on the surface of the wall etc., complete. Grade-A:Makes:Legrand(Ekinox3)/Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T/ Newrang / Indoasian (Opti Pro)

Supply and fixing of 40to63 Amps range TP MCBs 10KA breaking capacity'C'/'D' Curve ISI Mark as perIS:60898-1:2002 in the existing board and giving necessary connections. Grade-A:Makes:Legrand(Ekinox3)/Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 20 Amps 2Pin & Earth Socket Metal Plug Board with 1 No.20 Amps SPMCB 10KA'C' series ISI Mark including the cost of MCB on Surface of the wall and giving necessary connections. Grade-A:Makes:Legrand(Ekinox3)/Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 6to32 Amps range SPMCBs 10KA breaking capacity 'C'/'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A:Makes:Legrand (Ekinox3)/ Schneider-Acti9/Hager-Novello+/Seimens/HavellsSTADx/L&T-Newrang / Indoasian (Opti Pro)

(Rupees Seventeen Lakh Sixty Three Thousand Four Hundred Seventy Six and Paise Nineteen only)