SPECIAL REPAIRS OF ROOF OF DC CHAMBER(P-375B) AT SEAMANSHIP SCHOOL,NAVAL BASE KOCHI AND OTHER SANCTIONED WORK OF AGE B AND R II AND AGE E AND M UNDER GE NW NAVAL BASE KOCHI

Amount

Dismantling of plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern roof covering complete

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work such as grill/roof purlin etc not otherwise provided for

M & L for mild steel plates plain 5 mm thick cut to required size& shape and welded to GI pipe etc conforming to Fe-290 Gde E-165 complete all as specified

M&L mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 10cm but not exc 15cm long and dia of neck 11 to 15mm complete all as specified

M & L for structural steel work in tubular trusses,posts etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 including tarring the tubes embedded in concrete complete all as specified .

Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided n exc 15 cm thickness (below or above ground level) for complete all as specified .

M&L for 75 mm thick Cement concrete (1:4:8) type D-2, ( using 40mm graded aggregate) as in sub base of floor complete all as specified.

M & L for coarse aggregate for granolithic floors or in foundation filling, graded from 12.5mm to 4.74mm, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified

M&L for Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment all as specified

Demolition of brickwork or stone/boulder masonry or PCC block masonry built in cement mortar including all quoins,pillars etc excluding ashlar facing,dressed stone work and pre cast concrete articles and pre cast concrete block walling complete all as specified .

M&L for pre-cast cement concrete block masonry 1:3:6 Type C1, using 20mm graded aggregate with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed .

M&L for 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces , surface finished even & smooth (without using extra cement.) complete all as specified and directed.

M&L for painting to brick, stone, concrete, asbestos cement or plaster surfaces with 2 coats of synthetic enamel paint over a coat of priming paints plaster coat for new or previously untreated surface of any description over 10 cm grith or width not otherwise described including prepartion of surface complete all as specified and directed.

S & F PVC eaves gutter 180mm dia, semi circular with all necessary fittings, joining compounds, clamps, nut, bolts or screws etc and fixing in position, at any height complete all as specified and directed

S & F PVC (SWR) 110mm bore rain water pipes single socketed, in any length with rubber ring joints, fixed to walls including all necessary fitting all as specified

M & L for hardcore of broken stone of boulders gauge exc. 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified .

M&L for 150 mm thick Cement concrete (1:3:6) type C-2, ( using 40mm graded aggregate) as in sub base of floor complete all as specified.

M&L for 80 mm thick Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in sub base complete all as specified and directed .

M&L for 30 mm thick mastic flooring with bitumen blown grade 9%-10%, Lime stone dust (filler) 20% , Aggregate and Dust :70% , Blown (Industrial Grade) bitumen Softening Point 55 degree C to 75 Degree C penetration at 25 degree C in 1/100cm 10 to 40 Limestone dust with calcium carbonate content exceeding 80% Crusher dust, mix shall be laid with wooden spreading and finishing with floats, complete all as specified and directed (Note:- Sub base and lean concrete shall be measured and paid under respective items of BOQ)

M&L for 75 mm thick Cement concrete (1:3:6) type C-2, ( using 40mm graded aggregate) as in sub base of floor complete all as specified.

S&F 38 mm wide Plastic dividing strips, 1.5 mm thick all as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 290-W (Gde-E- 250) complete all as specified

M&L for applying two coats of synthetic enamel paint over a coat of metal primer including preparation on new steel surface exceeding 10 cm width or girth all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water any description complete all as specified

M&L for 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces , surface finished even & smooth (without using extra cement.) complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces , surface finished even & smooth (without using extra cement.) complete all as specified and directed.

M & L for preparation of new /old plastered surface of wall surface and applying of two coats of cement base paint over a coat of suitable primer complete all as specified and directed

M & L for preparation of new /old plastered surface of wall surface and and applying of two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified and directed

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F aluminium anodised DECO grill 10mm thick,DG 104 fixed with necessery U/F/H channel etc complete all as specified and directed

S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty/glazing clip in square not exc 0.50 sqm in each pane all as specified

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft/loose soil complete all as specified

M&L for plain cement concrete in 1:4:8 type D 2 using 40 mm graded stone aggregate for foundations, filling and mass concrete for filling in post holes all as specified

Surface excavation not exceeding 30 cm deep and averaging 15cm deep in soft/ loose soil complete all as specified .

M&L for 100 mm thick Cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in sub base complete all as specified and directed .

M&L for 30 cm x 30 cm x 10 mm thick Endura garden tiles of Make Johnson or equivalent make approved by GE, set jointed and pointed in neat cement slurry as in floors including 15 mm thick screed bed in cement mortar 1:6 complete all as specified

Removing of excavated soil not exc.250 mtr and n exceeding 500 mtr depositing where directed at a level not exc. 1.5 m above the starting point all as specified

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work ,for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, ornamental and intricate design etc con- forming to Fe.290.Gde-E-165

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc.not exc 10 sq m on plan and not exc 1.5 m in depth and getting out in soft soil complete all as specified

M&L for plain cement concrete in 1:4:8 type D2 using 40 mm graded stone aggregate for foundations, filling and mass concrete, concrete layer below plinth beam etc all as specified

M&L preparing new wall surfaces and applying three coats of white wash complete all as specified and as directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified .

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.50 sq. m but not exc 4 Sqm each all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.50 sq. m but not exc 4 Sqm each and refixing in oteher opening all as specified

S&F powder coated aluminium three track sliding window frame with 02 Nos glazed shutters and 01 No gauzed shutter using aluminium sections weighing not less than 0.55 kg/m including necessary joining cleat, glazing with clips, rubber packing, anodised aluminium snap beading, necessary locking arrangement, rollers,screws etc complete including 4mm thick plain glass glazingin glazed shutters and 0.45mm nominal sia stainless steel wire mesh in gauzed shutter complete all as specified

Dismantling floor hearth or wall tiling including cement mortar bedding removing serviceable tiles to store & rubbish off the premises complete all as specified.

M&L for dark shade vitrified ceramic tiles, 10 mm thick (square / rectangular), polished, area of each tile exc 0.42 sqm but not exc 1.00 Sqm, laid in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified

M&L for glazed ceramic coloured tiles 450x 300x 7 mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified

M&L for plastering in Cement mortar 1:4 as in backing coat of dado/skirting complete all as specified.

M&L for Screed bed or bedding layer or mortar in CM (1:4), 15 mm thick for laying in floor finishes all as specified.

S&F in repair Vitreous China coloured Wash Hand Basin, size 550x400mm (Flat Back type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted/erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F brass chromium plated bottle trap for wash basins with inlet or outlet screwed for pipe for connection including necessary packing, union and cap (32 mm bore) complete all as specified

S& F pillar tap 15mm bore fancy type, cast copper alloy with capstan heads, chromium plated, screwed down complete all as specified

S&F 15mm bore cast copper chromium plated angle cock, fancy type complete all as directed

S&F in repair brass Chromium Plated Tubular Towel Rail, 20mm dia, D type, 60 Cm long between Flanges and fixed, complete all as specified and as directed.

S&F interlocking aluminium alloy anodized snap grid consists of main Tee runners of size 38mm x 25mm x 1.5mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Tee 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25x25x2mm, aluminium alloy extruded section shall be aluminium anodized (minimum 15 micron) and shall conform to IS-733, IS-1285 and IS-737 including GI hangers 6 mm dia (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3mm size 60 mm long and expansion hold fastners 12.5mm dia 40mm long complete all as specified

S&F 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework in ceiling as per manufacturer's instruction all as specified

M & L for preparation of new ceiling surface and and applying of two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified and directed

S&F powder coated aluminium fancy type pipes as in cutain rods, 20mm dia and fixing as specified and directed .

S&F powder coated aluminium fancy type brackets for curtain rods 20 mm dia and fixing as specified and directed .

M & L for complete removal of existing treatment of internal wall surfaces and application of two coats of oil bound distemper including priming coat complete all as specified and directed.

M&L for preparation of new wall surface and applying two coats of interior emulsion having antifungal effect paint over a coat of suitable primer complete all as specified and as directed

M&L for preparation of new plastered wall surface and applying two coats and applying two coats of weather proof (anti fungal) paint over a coat of suitable primer complete all as specified and as directed.

M&L for complete removal of existing treatment on wall by washing down and rubbing and applying two coats of weather proof (anti fungal) paint over a coat of suitable primer complete all as specified and as directed .

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M&L for point wiring with 1.5 Sqmm PVC insulated unsheathed with proper colour coding FRLSH multistranded single core copper conductor cable in PVC Cassing capping non metallic medium grade with suitable size incl making good wall surfaces with existing surfaces and sunken box with modular cover plate concealed in wall accomading switches socket regulators etc incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for one light point/fan point controlled ,one way switch 5 Amp

All as per item No 71 here in before but for one bell point controlled by one 5 Amp bell push on independent board complete all as specified and directed.

All as per item No 71 here in before but for 5 pin 5/6 amps switch socket outlet point on independent board complete all as specified and directed.

All as per item No 71 here in before but for 5 pin 5/6 amps switch socket outlet point on same board complete all as specified and directed.

M&L for point wiring with 2.5 Sqmm PVC insulated unsheathed with proper colour coding FRLSH multistranded single core copper conductor cable in PVC Cassing capping non metallic medium grade with suitable size incl making good wall surfaces with existing surfaces and sunken box with modular cover plate concealed in wall accomading switches socket regulators etc incl 2.5 Sqmm PVC insulated copper conductor as earth continuity wire for 6 pin 15 amps switch socket outlet point on independent board

Material and labour for submain wiring with 2 runs of 4 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC cassing capping with all accessories on surface, one run of 4 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Three runs of 4 Sqmm size PVC copper cable and one run of PVC cassing capping shall be measured as one unit length.

S & F sheet metal enclosure with socket plug top and MCB's single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified

S&F bell push modular 5 Amps, single pole all as specified and directed.

S & F modular type socket outlet 3 pin, 6 Amps complete all as specified and directed

S&F switch modular type single pole, 6 Amps, one way all as per specified & directed.

S&F modular sockets multipurpose 6 Amp & 16 Amps, 5 pin complete all as specified and directed

S&F switch modular type single pole, 16 Amps, one way all as per specified & directed.

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals Complete all as specified and directed.

S&F electric bell, AC 230V, single pole complete all as specified and as directed.

S&F modular fan regulator 100W, 250V, step type complete all as specified and as directed.

Material and labour for submain wiring with 2 runs of 10 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC cassing capping with all accessories on surface, one run of 10 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-three runs of 10 Sqmm size PVC copper cable, one run of PVCcassing capping shall be measured as one unit length.

Material and labour for submain wiring with 4 runs of 16 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC concealed conduit with all accessories , one runs of 16 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting with suitable size thimble including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Five runs of 16 Sqmm size PVC insulated, unsheathed, multistranded copper conductor FRLSH and one run of PVC conduit shall be measured as one unit length.

S & F sheet metal enclosure for MCB DB, SPN, 12 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified.

Supply and fixing in repair VTPN MCCB DB double door 08 way (with MCCB as incomer ) suitable for UP to 250 Amp MCCB, IP- 43,insulated bus bar assembly with door earthing ,machenical impact strength IK 08 , all as specified and directed cat part-811895 of Indoasian /cat part-507759 of Legrand /cat part-DBVTH008SD of L&T .

Supply and fixing in repair VTPN MCCB DB double door 04 way (with MCCB as incomer ) suitable for UP to 250 Amp MCCB, IP- 43,insulated bus bar assembly with door earthing ,machenical impact strength IK 08 , all as specified and directed cat part-811893 of Indoasian /cat part-811895 Legrand /cat part-DBVTH004SD of L&T

S & F in replacement sheet metal enclosure TPN for DB's when MCB's to be used 4 way with 200 amps bus bar and double door complete all as specified and directed.Make -indoasian,,legrand L&T .

S & F Sheet Metal Enclosure for MCB DB, SPN, 8 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified. Make -indoasian,legrand L&T .

S & F 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 16 KA. complete with all incoming/outgoing connections with proper size of lugs complete all as specified and directed.Cat part no -830285 of Indoasian ,Cat part no -420017 of Legrand

S & F 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 25 KA. complete with all incoming/outgoing connections with proper size of lugs complete all as specified and directed. Cat part no -830296 of Indoasian ,Cat part no -420018 of Legrand

S & F MCB SPN 63 Amps,240 Volts,10 KA 'B' series with all incoming/outgoing connections with proper size of lugs complete all as specified and directed.cat part no -AU10SS0633B of L&T ,cat part no -811037 of IndoAsian

S & F MCB SP 6 to 32 Amps 240 Volts,10 KA 'B' series with all incoming/outgoing connections with proper size of lugs complete all as specified and directed. L&T,Legrand ,Indo Asian

Materials and labour, earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 m below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire 4 mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 15 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch all as shown in electrical plate No 3 of SSR Part-I 2009 including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50mm thick precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover slab (reinforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia), with 40x40x6mm MS angle iron frame including necessary earth work and testing on completion, complete all as specified and as directed.

Supply and fixing 20 watt LED T-8 tubular lamp with extruded aluminium /pc body and PC diffuser and inbuilt driver.including mirror lite batten suitable for T8 lamps , suitable connection from ceiling rose to tube lamp all as specified and directed Cat No.-LTT8-20 and DMLN1LT8-16 of crompton or equvalent of philips ,bajaj approved by GE

Supply and fixing LED Mini mirror light 1 x 14 Watt Wall/Surface mounted luminaries with engineering plastic housing, wired with all accessories complete incl provn of flexible copper wire from ceiling rose to light fitting terminal. Make- Make :Crompton Cat No. LCL-14-CDL or equivelent make of Philips/bajaj approved by GE

Supply & fixing building security light fitting LED 40 W ,IP 67 ,240 volts ,50 Hz including GI bracket for wall mounting all as specified and directed Cat No. LSTS-40-CDL of crompton, or equivelent make of philips ,bajaj ,wipro approved by GE

Supply and fixing (CT -3) decorative wall mounted light fixture made up of polycarbonate unbreakable suitable for 10 W LED lamp holder spiral B-22 base including 10 W LED lamp and suitable connection .all as specified and directed .Make -Havlles cat part No-LHDL06160099 or equivelent make bajaj /philips approved by GE

Taking down existing Ceiling fan,with sealing cable end dismantling blades and painting two coat with synthetic enamel paints by spraying including filling cavities with filler , servicing, and rehanging on original position including necessory conection with copper conductorall as specified and directed.

Material and labour for point wiring for one light/fan point with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC Conduit medium grade ISI marked Concealed of suitable size with all accessories and sunken box of 1.6 mm thick pressed steel box factory made for mounting of switch, socket and fan regulator with modular frames covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed .

All as per item No.103 here-in-above but 5 pin 5/6 amps switch socket outlet point on independent board.

All as per item No.103 here-in-above but 6 pin 15 amps switch socket outlet point on independent board with 2.5 sqmm (FRLSH)PVC insulated unsheathed stranded copper conductor with 2.5 sqmm PVC (FRLSH) insulated stranded copper wire for continuous earthing.

Supply and fixing ceiling fan 1200 mm complete with 300 mm/450 mm hanging Rod and accessories 230 V,1200 mm sweep. BEE 5 star rated.colour white including marking of MES No with black paint Model-Coolgale DX 48 of V-Guard ,or equvalent of Crompton ,Bajaj approved by GE

Supply & fix highly robust industrial Box type Batten with single T- 8 Led tube rod 20 watt 240 volt ,50Hz with all necessories connection all as specified and directed . Cat part no- IGP132LT8-16 (Batten ),LTT8-20(tube rod ) of Crompton or equvalent of Bajaj approved by GE

Supply & fix Vector -1 multi angular slim celing light LED down lighter 2'x2' , 36 W ,240 volt ,50Hz with all necessories connection all as specified and directed .cat part no - LCTLRF1-36-WW of crompton or equivalent of Philips,wipro .approved by GE

S & F MCB SPN 40 Amps,240 Volts,10 KA 'B' series with all incoming/outgoing connections with proper size of lugs complete all as specified and directed. Cat part no - AU10S20403B of L&T,or legrand, IndoAsian approved by GE .

Supply,install,testing and commissioning of inverter split Air conditioner with cordless remote controll,ecofriendly refrigerent 6000K cal/hr,50Hz 240 v including all fixing arrangement of capacity 2 Tr complete all as specified and directed. Make:- Hitachi/Blue star/Carrier/Daikin/Loyd.

S & F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity suitable for inverter type split AC for 2 TR.

Supply & fix stop valve (angle type) cast copper alloy high pressure , screwed for 15mm dia CP fancy type .Make:-CERA/JAGUAR/HINDWARE

Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia including taking down old one complete all as specified and directed. Make: Supreme/Eurotech /Astral/SFMC

Albert Rebello and Company

K.V.GEORGE AND COMPANY

M/s ANTONY THOMAS AND CO

M.J.JOY AND COMPANY

R.K. Builders