SPECIAL REPAIR TO BLDG NO T 07 AND SPECIAL REPAIR TO FENCING OF SECURITY AREA IN B SUB DEPOT AT 29 FAD DEHU ROAD UNDER GE DEHU ROAD

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing all as specified and as directed.

Dismantling framed trusses of span not exc. 10 meter all as specified and as directed.

Dismantling 2nd class HW battens for tiles of any size including tilting fillets spaced exc. 15 cm all as specified and as directed.

Dismantling timber in scantling 40 sqcm and over in section in any position unframed all as specified and as directed.

Dismantling 2nd class HW boarding any description & any position all as specified and as directed.

Dismantling timber in fillets,rafters,purlins etc. under 40 sqcm in section unframed work all as specified and as directed.

Demolition of brick work/stone work built in cement mortar (in portions) all as specified and as directed.

M & L for MS work as in plate (plain or chequered) square cut or notched forming holes without any attachment all as specified and as directed.

M & L for mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exceeding 30cm long of dia of neck in mm exc 12 and not exc 20mm all as specified and as directed.

S&F Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) all as specified and as directed.

M & L for MS work as in roof trusses (framed) trussed, purlins including distant pieces, cleats etc including cutting and welding required confirming to grade Fe 410-W all as specified and as directed.

M & L for brick work with sub class "B" brick straight or curved on plan exceeding 6 mtr mean radius built in cm 1:6 all as specified and as directed.

S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete.

All as per item No. 13 above but plain sheet fix in vally gutter/ ridge complete all as specified and as directed.

M&L for rendering 20 mm thick on fair faces of stone masonry surfaces or surface other than rair face of brickwork in cement mortar 1:4, complete all as specified and as directed.

M&L for two coats of cement base paint on wall surfaces with preparation of surfaces over coat of white washall as specified and as directed.

M & L for painting to steel surface with two coats of synthetic enamel paint with red oxide including preparation of surfaces all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C) any section embedded in concrete work including taking out embedded portion and makinfg good disturbed ground all as specified and as directed.

Dismantling fencing wire mesh, any type complete all all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distanc n exc 50 m and making good surface in hard/dense soil all as specified and as directed.

M&L for Cement concrete type C2 1:3:6 (using 40mm graded aggregates) as in retaining walls, any thinkess, size or shape including pilasters, buttresses columns, pillers, boundary and post (including caps and bases) all as specified and as directed.

S&L Mild steel work post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 all as specified and as directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confiorming to round bars Fe-410-W (Gde.E-250) quality A- or Fe 290 (Gde-E-165) all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of neck 5 to 10 mm all as specified and as directed.

Supply only Chain link MS galvanisd fencing 3.8 mm dia wire, made into mattresses laped wired laid in position all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wireany size or type weight n.exc 4 Kg per Sqm metre as approved by Engineer- in-Charge

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L for two coat of Black bituminous paint including preparation of surfaces of steel , iron , concrete surfaces all as specified and as directed.

D J Construction

DR J S CHADHA AND SONS

M/S B.A. GAIKWAD

M/S RENUKA CONSTRUCTIONS