Construction of Compound Wall, store development, drainage Line ,toilet & Other Misc Civil Work at Umreth rural &Town subdivision office under Anand (O&M) Division.

Name of work : Construction of Compound Wall, store development, drainage Line ,toilet & Other Misc Civil Work at umreth rural &

town subdivision office under Anand (O&M) Division.

Sr Item Discription Qty. Rate Unit Amount

1 Excavationforfoundationupto1.5m depth including sorting out and 470.0 122 CMT

stacking of useful material sand disposing offthe excavated stuff up to

50Meter lead.(B) Loose and soft soil

2 Filling available excavated earth(excludingrock) intrenches. plinth, sides 365.0 136 CMT

of foundations etc. in layers not exceeding 20cm. In depth consolidating

each disposited layer by ramming and watering.

3 Filling in foundation and plinth with murrum or selected soil in layers of 350.0 291 CMT

20cm. Thickness including watering, ramming and consolidating etc.

4 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand 45.0 3038 CMT

: 6- Graded brick bat aggregate 40mm normal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

5 Providing Brick masonry using common burnt clay building brick having 40.0 5073 CMT

crushing stregth not less than 35Kg/Sq.Cm. in foundation and plinthin

Cement Mortar(1:6)(1-Cement:6-Fine Sand) including racking out joints

upto12 mm depth, scaffolding, curing, filling up the gaps between the

joints complete as directed by E.I.C. Fly Ash Bricks

6 Providing Brick masonry using common burnt clay building brick having 135.0 5352 CMT

crushing stregth not less than 35Kg/Sq.Cmin Super Structure

G.F+F.F+Stair Cabin cement mortar1:6 including racking out joints upto

12mm depth, scaffolding, curing, filling up the gaps between the joints

complete as directed by E.I.C. Fly Ash Bricks

7 Providing and laying controlled cement concrete M:25 55.0 4597 CMT

(minimumcementcontentof380kg/cmt,i.e.7.6BagsperCmt) and curing

complete including cost of necessary ,formwork, compacting with

vibrator curing centering & shuttering in trueline and level etc,but

8 Providing and laying controlled cement concrete M.250 35.0 5038 CMT

and curing complete including the cost of formwork

and reinforcement for reinforced concrete work in (D)

Columns, Pillars posts and struts, upto floor two level.

9 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- 32.0 6513 CMT

coarse sand : 4- graded stone aggregates 20 mm nominal size) and

finishing smooth with,curing etc. complete including the cost of formwork

but excluding the cost of reinforcement for R.C.C work in (A) BEAMS :(iii)

Having cross-sectional area more than 0.12Sq.M and upto 0.18 Sq.M

10 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- 10.0 10118 CMT

coarse sand : 4- graded stone aggregates 20 mm nominal size) for R.C.C

lintel including finishing smooth with,curing etc. complete including the

cost of formwork but excluding the cost of reinforcement.

11 Providing and laying Thermo Mechanically Treated (TMT bars) steel 14000.0 77 Kg

reinforcement conforming to grade Fe 500 IS : 1786 for RCC work

including cutting, bending, hooking and binding the reinforcement with

approved quality of binging wire etc., completed as per design TMT

12 20mm thick sand faced cement plaster on walls upto height 10 metres - 1300.0 349 SMT

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement :

sand) etc. complete

13 Finishing wall with weather proof exterior emulsion paint on wall surface 1500.0 119 SMT

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete

14 Demolition of Brick work and stone masonry including stacking of 5.0 557 Cmt

serviceable materilas and disposal of unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

15 Providing, fabricating and erecting in position MS Hollow pipe section of 3000.0 100 Kg

required size for FRP Shed structure / compound wall ms angle including

welding the section as per instruction and drawing making holes & one

coat of red oxide & oil painting of approved shade and make.

16 Providing & Fixing 12/14 G I Barbed wire with over compound wall 2200.0 19 RMT

including all materials and tools and tackles etc completed. The

measurement shall be taken per individual row.

17 Providing and fixing 600mm effective dia(after0 lying)HOT DEEP 310.0 350.00 RMT

GALVANIZED RAZOR TAPE CONCERTINA COIL with all required clips,

pins etc as per specification. Concertina coil shall be fixed to M.S.Angles

with RBT(Razor barbed tape) with the help of u-nails/split pin. Rate shall

be quoted on running meter s of compound wall basis. (1) Effective dia of

coil after stretching shall be 600 mm. (2) Number of circles and no of clips

shall be 72 +/- 3 and 180 respectively in each 9meter of laid length.

Minimum 3 clips per loop should be fixed WITH PUNMATIC TOOLS. (3)

Central core wire shall be made of 2.5 mmdia.

High carbon spring steel made up of high tensile strengtrth as per

I.S.4454 Part-1,grade-ii,having minimum galvanizing coating thickness

equivalent of 120 GMS PER SQM. (4) Razor strip shall be of 0.5 mm

thick and 19 mm width confirming to IS 513.DD quality having minimum

galvanizing coating of 12 microns, Series of barbed punch shall be

punched along the length at regular intervals.(approximately 160 barbs

per running meter of concertina coil)(5) Clips shall be made up of

stainless steel(ss 304)(6) The razor strip shall be mounted on the central

core wire by mechanical crimping.(7) The work is to be carried out over

the boundary wall. at all heights including necessary scaffolding

etc.comp. Note-Payment for supply and laying of support RBT(Razor

barbed tape) with the help of u-nails/split pin will be made separately

under a separate item.

18 Providing and fixing Chain link roll having 10 gauge wire & 50x50mm jali 50.00 270 SMT

with appropriate height as directed and fixing the same to MS angle and

providing and fixing MS flat bedding by means of MS nut & bolts etc.

complete as directed by EIC.

19 Providing and laying controlled cement concrete M20 for trimix RCC 34.0 6656 SMT

Excluding the cost of reinforcement & including of using 125 micron

polythine sheet at base of concrete using approved quality of polyester

fiber (12mm) during mixing of cement concrete @ 125 gm per bag) and

or as per manufacturing ,s specification of cement concerte @ 125 gm

per bag) and or as per manufacater's specification including preparing

the sub base with form work of M.S Chhanel of requiared size to

maintain level and slope of concrete with using surface vibrator ,finishing

the surface with power floter and trove ,light brooming on the surface

with providing construction joints of size 10 mm wide 25mm deep in

transverse direction @ 4.5 m C/C with sealing the same with approved

quality bitumen sealent and providing expansion joints of size 25 mm

width and up to throught depth of concete using 25 mm thick dura board

HD -100 of approved quality and sealing the same with approved quality

bitumen sealent at 40 meter C/c and or as directed using concrete cutter

machine with necessary equipments ,labours tools tackles etc complete

as directed by EIC.

20 Providing supplying and spreading / mixing " CHAPDUR" chemical for 200.0 80 SMT

smooth and luster finish of top surface of road (Note: Chemical is to be

used as per manufacturers specification and instruction given by EIC

having consumption of 4.00 KG per SMT

21 Demolition including stacking of serviceable materilas and disposal of 5.00 1072 CMT

unserviceable materials with all lead and lift. (i) R.C.C. work

22 Half brick masonry in common brunt clay building bricks having crushing 15.00 744 SMT

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement :

4 -coarse sand ) in n superstructure above floor two level (C)Fly Ash

23 Providing and Laying controlled cement concrete M.200 and finishing 2.00 7402 CMT

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C work in (ii)Slabs having

more than 8 cm and upto 10 cm. thickness

24 Providing and Laying controlled cement concrete M.200 and finishing 8.00 7134 CMT

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C work in (ii)Slabs having

more than 10 cm and upto 13 cm. thickness

25 Providing 10mm thick cement plaster in single coat on Ceiling for interior 45.00 226 SMT

plastering upto floor two level and finished even and smooth in

(i)Cement mortar 1:3 (1-cement:3-sand), finishing with a floating coat of

neat cement slurry.

26 Providing 15mm thick cement plaster in single coat on Rough 60.00 252 SMT

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement mortar 1:3 (1-

cement:3-sand), finishing with a floating coat of neat cement slurry.

27 Providing cement vata (10cm. x 10 cm. size) quarter round in cement 35.00 24 RMT

mortar 1:1 including neat cement finishing, watering etc. complete.

28 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 12.00 43 RMT

29 Filling the electric pipe jari with cement mortar (1:1) with all tools & 1.00 2000 Job

tackles and material complete as direted by EIC. The rate is incluive of

disposal of chari waste/debries including watering.

30 Wall painting (Three coats) with plastic emulsion paint of approved brand 101.10 124 SMT

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

31 Applying two coats of putty & two coats of primer of approved brand and 101.10 40 SMT

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

32 Providing and fixing Window having extruded alluminum colour 10.00 2021 SMT

annodized section frame main outer side 63.50 x 38.10 x 1.95 mm (of

Jindal Section No 4605 @ Wt 1.094 Kg/Rmt) horizontal Two Track

member size 61.85 x 31.75 x 1.2 mm (of Jindal Section No 8687 @ Wt

0.695 Kg/Rmt) vertical member of size 61.85 x 31.75 x 1.3 mm (of Jindal

Section No 8758 @ Wt 0.659 Kg/Rmt) with sliding shutters of horizontal

member size 40 x 18 x x 1.29 mm (of Jindal Section No 8949 @ Wt

0.456 Kg/Rmt) vertical member of size 40 x 18 x x1.29mm (of Jindal

Section No 8947 @ Wt 0.456 Kg/Rmt / section 8948, @ wt 0.457 Kg/Rmt

) with 5mm thick tranparent Bronze Colour Tinted Float glass with

powder coated alluminium fittings and fixtures and tranparent silicon

sealant glass fixing to frame as per detail etc. complete for Window. Only

mechanical joints shall be used, welding shall Not be permitted.

Concealed lock of Indigo or equivalent and white PVC Gasket is to be

utilized in the work. For window opening more than 2.00 in length

equivalent weight with three track should be provided as approved by

33 Providing and fixing in position partly paneled and partly glazed 10.00 2400 SMT

Alluminium door shutters Colour Anodised / Powder (Epoxy) coated.

Glazing shall be 5 mm thick tinted glass of Modi Float / Saint Gobain

make, panels shall be both sides laminated Board 9 mm thick "Green

Lamiboard make" as per drawing or as directed. Rate includes cost of

Alluminium frame, transparent glazing gasket, locking arrangement, 12"

Handle (D Type), etc. complete. Extruded Alluminium sections shall be

Jindal Make conforming to HE9WP for its chemical and mechanical

properties. All joints shall be mechanically jointed. NO welding process

shall be allowed in the unit. Sections to be used shall be 2.0 mm thick

with details as per drawing.

34 Providing & Fixing in position partly pannelled and partly glazed 2.00 2000 SMT

aluminum partition without door shutters using Colour anodized

aluminum section. Panels shall be 9mm both side pre laminated MDF

board of "Greenlam" make and glazing shall be 5mm thick tinted glass of

"MODI"/ Saint Gobain" as per drawing or as directed. Rate including cost

of all materials including gaskets, Aluminum clips having unit weight

.097Kg./Rmt. and labour required to complete the job as per good

practice Extruded Aluminum section of Jindal make available in ALLOY

63400 and Temper WP [HE9WP] corresponding to IS -733 and IS

to be used for Frame single groove 4605,Frame double groove

Only mechanical joints shall be used. welding shall not be permitted.

35 Providing and fixing 35 mm thick Decorative type Water proof flush door 1.89 4000 SMT

shutters, solid core construction with wood frame with Polish of first

class hard-wood with cross band and face ply-wood face panels, 1.0 mm

thick laminate on both sides including Stainless steel fixtures and

fastening like tower bolt, stopper including for door shutters sides etc

complete. as directed by engineer in charge.(Measurement Shall be

Consider L X H)

36 Providing & fixing Hydraulic door closer Godrej make including removing 2.00 1500 NO

old damaged one with all necessary tools, tackles and labours as directed

37 Vitrified Tiles Flooring at Ante Room Toilet : Providing and laying Matt 45.00 1585 SMT

finish Vitrified tiles flooring Premium Quality double charge HD of

approved make, shade and pattern of 600x600mm size in flooring,

skirting etc., using minimum 10 mm thick tiles of as per approved

make list by architect/client, neat cement slurry over cement sand

beading 65mm.th. . in 1:6 including flush pointing in white/colour

cement with pigments of matching shade and jointed with 3mm thick

epoxy grouting as per approved make of approved shade and colour in

proper line and level as per detailed drawing / instruction and approval

by architect. The rate shall be inclusive of protecting the flooring by

plaster of Paris applying and after completion of work remove or 4 mm

thick protection sheet of Supreme make EPE+HM Blue. Including cost of

all type of tools, tackles, all labour, materials, transportation, cleaning

at all floor, all level, all depth, all Height, all lead and lift , work complete

as per the detailed drawing, approved sample, specifications and

instruction of Architect/EIC. Sample mock shall be approved from

Architect/EIC. (A) Tile size: 600 mmX 600 mm, Matt finish Vitrified tiles,

Basic rate of tile is Rs. 70/Sqft

38 Providing and laying polished kota stone slab 25mm thick in risers of 29.25 1173 SMT

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and polishing etc.

39 Providing & fixing granite in flooring, riser and Treads of steps, partition 15.00 3000 SMT

for drinking water, moulding the edges and grooving if directed, of size

not less than1200mm in length and full width of treads in C.M.1:2 neatly

finishing the joints, curing etc. comp as directed by EIC.

40 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 81.00 700 SMT

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

41 Providing China Mosaic water proofing treatment in Terrace of different 29.25 1349 SMT

levels preparing roof surface for laying brick bat on cement mortar (1:4)

with special water proofing composed in necessary gradient for easy flow

of rain water, brick bat coba is finally covered by China Mosaic Tikdi fixed

42 Providing and fixing pillar tap, capstan head, screw down high pressure 1.00 351 Each

with screws, shanks and back nuts. (ii) 20mm dia

43 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 1.00 850.90 Each

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

44 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets 1.00 610 Each

fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

45 Providing and fixing cast iron (Spun) Nahni trap of the following nominal 1.00 628 Each

diameter of self cleaning design with C.I. screaed down or higned grating

including cost of cutting and making good the walls and floor 100mm

inlet and 50mm outlet.(C) 100mm dia.

46 Providing and fixing 15mm L&K make angle cock as directed by EIC. 2.00 800.00 No

47 Providing and fixing 15mm L&Kn make short body Bib cock as directed 1.00 896.00 No

48 Providing and fixing L&K make Pillar cock as directed by EIC. 1.00 969.00 No

49 Providing and fixing L&K make Conceal stop cock including two nos of 1.00 1500.00 No

brass MFT as directed by EIC.

50 Providing and fixing L&K make flush cock medium including two nos of 1.00 1600.00 No

brass MFT as directed by EIC.

51 Providing and fixing L&K make two way bib cock as directed by EIC 1.00 1580.00 No

52 Providing and fixing Pilot brand make brass hand faucet directed by EIC. 1.00 600.00 No

53 Providing and fixing wsh down water closet (European type, W.C. Pan) with 1.00 1343 No

integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and

paid for separately)(A) vitreous China Pattern :(i) in white colour

54 Providing and fixing Urinal or approved quality including conecting the 1.00 1064 NO

Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back

or corner type size 430mm x 260mm x 350mm.

55 Providing and fixing washbasin with single hole for pillar tap with C.I. or 2.00 1512 NO

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

56 Providing, laying & jointing in true line and level 15mm dia UPVC Pipe (SCH - 15.00 72 RMT

40 ) including fittings Ashirvad/finolex make and approved by engineer in

charge. Pipe shall be fix on the wall with the help of clamp at every two mt

c/c or shall be conceled as directed including necessary fittings etc.including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of materials.

57 Do as above but for 25 mm dia UPVC Pipe. 20.00 91 RMT

58 Do as above but for 32 mm dia UPVC Pipe. 5.00 118 RMT

59 Do as above but for 40 mm dia UPVC Pipe. 5.00 147 RMT

60 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 2.00 185 NO

61 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 2.00 657 NO

62 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 40.00 826 RMT

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

63 all materials.

Supplying and fixing reinforced concrete heavy duty non- 137.00 653 RMT

pressure pipes with collars for culverts carrying heavy

traffic as per IS 458-1991 specifications including setting

the pipes in C.M. 1:2 watering and laying (to level or

slopes) of class NP3 of following internal daimeters.(i)

64 Constructing brick masonry chamber for underground C.I. Inspection 11.00 3625 NO

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(ii) Inside dimensions

500mm x 700 mm and 450mm deep for pipe line with one or two inlets.

65 Extra over items for every additional depth of 0.1M. of part thereof beyond 200.00 262 NO

450mm depth for Brick masonry chamber.(ii) for 500mm x 700mm size.

66 Providing and fixing in position cowel went to pipes.(C) 100mm di 1.00 500 NO

67 Providing and laying coloured glazed tiles/GVT (Matt/Glossy) Vetrified of the 11.04 1473.50 SMT

size 300mm x 200 mm x 8mm / 300mm x 450mm x 8mm/600mm X

600mm X8mm /1200mm X 600mm X 10 mm in skirting, risers of steps and

dedo on 10mm. thick cement plaster1:3 (1cement:3coarsesand) & jointed

with white cement slurry. ( As directed by EIC /Architect )

68 Any item of SOR year 2024-25 of ROADS & BUILDINGS DIVISION Anand 1.00 50000 NO

(GOG)/Approved PO/Approved rate analysis as per description of items with

TOTAL Estimated Amount Rs.