Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹46.8 L+₹8.2 L (21.1%)Rejected-Finance | L2 | Rejected-Finance Being Not L1 |
Tender Value
₹48.2 L
EMD Value
₹96,400
Closing Date
7 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) DM Visakhapatnam
GE (I) DM Visakhapatnam
AS AND AS FOR IMPROVEMENT OF HABITABILITY IN BATHROOM FOR NAVAL ANALYSIS UNIT VISAKHAPATNAM, PROVISION OF POL STORE IN MYS AND RAC DEPARTMENT AND PROVISION OF DEEP FREEZERS FOR COMPANY DSC AT NAVAL DOCKYARD, VISAHAPATNAM UNDER GE (I) DM, VISAKHAPATN
2023_MES_626774_1
8934/E8
Open Tender
Civil Works
Item Rate
180 days
Naval Dockyard Visakhapatnam
As per tender documents
8 documents required · 8 mandatory
₹500
GE (I) DM Visakhapatnam
₹96,400
Yes
1 Feb 2024
4 Nov 2023
14 Dec 2023
4 Nov 2023
7 Dec 2023
18 Nov 2023
Amount
[SCHEDULE 'A' PART-I [B/R WORKS]
Demoliton brick work or stone masonry built in cement mortar including all quoins , arches , pillars etc and removing the debris remove from outside of Dockyard premises all as specified and directed.
M&L for Pre cast cement concrete type 1:3:6 type C-1 (20mm graded stone aggregate) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.
M&L rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces and finishing the surface even and smooth with out using extra cement all as specified and directed.
Dismantling floor, hearth or wall tiling or stone slabs of any description and in any postion including cement mortar bedding (but not backing), removing and rubbish off the premises and removing the debries outside from the Dockyard premises all as specified and directed.
M & L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over incl rendering in CM 1:4, 10mm thick all as specified and directed.
M&L for coloured non skid ceramic tiles 7mm to 8mm thick (square or rectangular) of area exc 0.18 but n.exc 0.38 Sq.m in floor set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including cement screed 15mm thick in CM 1:6 all as specified and directed.
M&L for light shade vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick cement mortor (1:6) screed bed complete all as specified and directed.
Taking down cement plaster on walls/Ceiling etc including racking out joints hacking for key scrubbing down with water and removing the debries away from the Dockyard premises all as specified and directed.
M&L rendering 5mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces of ceilings finished even & smooth(without using extra cement) inlcuding preparation of new plastered surface of ceilling and applying two coats of white wash complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of white wash complete all as specified.
Taking down chowkats or frames exc 1.5 Sqm each (Without taking off shutters from the frame) all as specified and directed.
S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing
S&F 100mm SS butt hinges, medium weight, cold rolled and fixed to wooden or steel framed all as specified and directed.
S&F 150mm aluminium anodized handles, cast type all as specified and direced.
S&F 200mm aluminium anodized barrel tower bolt of extruded section all as specified and direced.
S&F 250mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruced sections or cast aluminium alloy all as specified and directed.
S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified (thickness of powder coating of any colour not less than 50 micron) all as specified and directed.
S&F powder coated anodised aluminium doors, windows, ventilators with one or more rebates includning joining cleat for fixing etc. complete all as specified (thickness of powder coating of any colour not less than 50 micron) all as specified and directed.
M&L for 5.5mm sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified and directed.
S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.
M&L 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber frame work complete all as specifid and directed.
S&F 150mm long floor door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring, fixed in floors complete all as specified an directed.
S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.
S&F aluminium 4 levers Mortice lock, vertical type, size 100mm size all as specified and directed.
Taking down chowkats or frames n exc 1.5 Sqm each (Without taking off shutters from the frame) all as specified and directed.
S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S&F 5.0mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified and directed.
Taking down GI tubing 15mm dia with all connection all as specified and directed.
S&F 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and directed.
Cutting chases, pinning in stone, concrete block or slab wall, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.
Taking down GI tubing 20mm dia with all connection all as specified and directed.
S&F 20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.
Supply fix in repairs Viterous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain(or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc, all as specified and directed.
S&F plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel C.P or Aluminium hinging device all as specified and directed.
S&F in repair health faucet chromium plated with CP pipe of 1.4m long with jet spray with PVC chord and connector complete all as spd and directed.
S&F in repair toilet paper holder vitrous china colour box type all as specified and directed.
S&F in repairs vitreousus china squatting pan `ORISSA` pattern size 580 x 440 mm with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe and provision of concrete bedding complete making good floor all as specified and directed.
S/F in repair PVC low level flushing cistern 10 ltrs capacity including all fittings and brackets bends flush pipe etc and fixed in repairs all as specified and directed.
S & F fancy type chromium plated 15 mm bore two way bib tap, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.
M&L for 20m thick Granite (of any type) work (table rubbed and polished) in WHB counter, steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admixture of pigment to match with shade of granite complete all as specfied and directed
S&F 110mm bore PVC SWR S trap all as specified and directed.
S&F 110mm bore PVC SWR P trap all as specified and directed.
S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) in repairs including cutting for and pinning ends of brackets or erecting stand in repairs all as specified and directed.
M&L 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.
S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed.
S&F in repairs of Vitreous China bowl urinal flat back size 465x355x265mm white (minimum) (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe all as specified and directed.
S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as directed
S & F in repairs Fancy type chromium plated 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repairs fancy type chromium plated 15 mm bore bib tap, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.
S/F in repair PVC connection (high density) 15 mm dia 600 mm with PTMT nuts both ends with rubber washer all as specified and directed.
S/F in repair PVC connection (high density) 15 mm dia 450 mm with PTMT nuts both ends with rubber washer all as specified and directed.
S&F in repair Waste pipes 32 mm dia LDPE ,UPVC pipes of pressure rating 6 Kg/cm2 for wash basins and urinals all as specified and directed.
S&F in repair Waste pipes 40 mm dia LDPE, UPVC pipes of pressure rating 6 Kg/cm2 for wash basins and urinals complete all as specified and directed.
M & L for 75 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
M & L 75 mm bore PVC (SWR) multi floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs grating round of size 75mm dia, chromium plate complete all as specified and directed.
S&F in repair 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any legth with rubber ring joints laid in floors or trenches all as specified and directed.
S & F in repair 110 mm bore PVC (SWR) , waste and rain water pipes single socketed in any length with rubber ring joints complete all as specified and directed.
S & F in repair 75 mm bore PVC (SWR) bends of any radius all as specified and directed.
S & F in repair 110 mm bore PVC (SWR) bends of any radius all as specified and directed.
S & F in repair 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed.
S & F in repair 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal all as specified and directed.
S & F in repair 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and directed.
S & F in repair 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and directed
S & F in repair 75 mm bore PVC (SWR) vent cowl all as specified and directed.
S & F in repair 110 mm bore PVC (SWR) vent cowl all as specified and directed.
S & F in repair soap dish vitreous china white of size 160x160x90 mm fixed to plug with chromium plated brass screw complete all as specified and directed.
S&F in repair chromium plated tubular towel rail D Type of 20mm dia bore and 600mm long comlete all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.
S/F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints any size including fixing to steel pipe or union all as specified and directed.
S & F in repairs fancy type chromium plated 15 mm bore concealed stop valves , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.
S & F for 1000 ltr capacity rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tank and removing to store all as specified and directed.
S & F 20 mm dia gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs all as specified and directed.
S & F 25 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position and Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., complete all as specified and directed.
Taking up or down steel tubing 15mm bore and connections, including cleaning for re fixing or removal to store and refixing old steel tubing andconnections in new or old position (Walls, ceiling, floors, etc complete all as directed
Taking up or down steel tubing 20mm bore and connections, including cleaning for re fixing or removal to store and refixing old steel tubing andconnections in new or old position (Walls, ceiling, floors, etc complete all as directed
Demolition of cement concrete of any description and in any position and removing the material away from dockyard premises complete all as specified.
M&L removing all dust/dirt from sunken floor and applying two layers of cement slurry mixed with Acrylic based polymer modified cementitiois composite compound coating such as Product like Sika Latex Power manufactured by Sika India Pvt Ltd or equivalent product manufacture by FOSROC Chemicals (India) Ltd/Pidilite Industries Ltd/Choksey Chemicas Pvt on concrete/brick surfaces as water proofing slurry coating as per manufacturer,s instructions complete all as specified and directed.
M&L for rendering 20 mm thick in two coats, 10 mm thick each caot with Polymer mortar(cement mortar 1:4 mixed with acrylic based modified cementitious composit compound such as product like like Sika Latex Power manufactured by Sika India Pvt Ltd or equivalent product manufacture by FOSROC Chemicals (India) Ltd/Pidilite Industries Ltd/Choksey Chemicas Pvt on concrete/brick surfaces and finishing surface even and smooth without using extra cement complete. Each layer shall be allowed air cure for 4 hours followed with water curing for 48 hours before applying the second layer complete all as specified and directed.
M&L for providing 200 micron thick polythene film pasted with the help of adhesive over the treatment plastered surfaces of sunken floor complete all as specified and directed.
M&L providing, cement concrete type E2 1:4:8 (Using 40mm graded stone aggregate) as in in foundations, filling and mass concrete complete all as specified and directed.
M&L for cement concrete type B-1 1:2:4 (using 20mm graded stone aggregate) as in flooring all as spcified and directed.
M&L for chipping (20mm to 50mm) of existing damaged, cracked, spalled & loose portion of concrete of the RCC members completely till the reinforcement is exposed and sound concrete is observed by using mechanical means and manual chisels and further the surface is cleaned with water jet, again clean the surface with blower to remove all loose fine particles present in the surfaces and for removal of dust and loose particles complete all as specified and directed.
M&L for preparation of exposed surafces of rusted steel reinforcement with metal wire brush,cleaning the rusted surfaces free from loose rust and applying rust remover cum passivator (Sika Rustoff 100 @ 0.20Kg / Sqm or any other equivalent approved make of E -in -C's branch) on surface of existing reinforcement with brush to the rusted reinforcemnet , removing rust with flex after 24 hours of application of rust remover with the help of wire brush, sand paper and throughly washed with water with the help of pressure jet and allowing surfaces of steel it to dry complete all as specified and directed. . Note:- Area of cleaned reinforcement steel bar shall only be considered for payment Density: 1.01 Kg/l at 300C
M&L for preparation of surfaces of steel of reinforcement by cleaning throughly and providing, mixing and applying zinc anti-rust agent as per manufacturers method of application to rebar corrosion protection system to reinforcement (Sika/ Fosroc/BASF/Dr Sunanda) @ 3.75 Kg/ SqM surface of steel reinforcement in two coats complete all as specified and directed.
Material & labour applying a coat of Polymer modified cementious bonding coat on the concrete surfaces with one part of Styrene Butadiene Rubber latex emulsion (SBR latex) manufactured by M/s Fosroc chemicals or equivalent chemicals manufactured by Sika India Pvt Ltd / Choksey Chemicals Pvt. Lt with four parts of water and six parts of cement by weight.Coverage of SBR latex-0.25Ltr / sqm for one coat complete all as specified and as directed.
M&L for applying polymer modified, cementitious mortar fibre reinforced, single component shrinkage controlled, (Renderoc SP40 of Fosroc Make or equivalent in Sika / Choksey) having a compressive strength of 40 MPA strength for reparing of RCC members like columns, Beams / Slab soffits etc. complete all as specified and directed.
M&L for application of polymer modified reinstatement mortar 20mm thick in isolated palces of repair works of RCC members with Rendroc S2 of M/s Fosroc make or equivalent in Sika / Choksey having a compressive strength of M40 grade complete all as specified and as directed.
Surface Excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed.
Excavation in trenches not exceeding 1.5 M deep for foundation etc and getting out in soft/loose soil all as specified and directed.
M&L PCC 1 : 4 : 8 type D2 using 40 mm graded stone aggregate, in foundations, filling and mass concrete all as specified and directed.
Material and labour for RCC (1:2:4) type B1( using 20 mm graded aggregate) in foundation including rafts ,footing ,foundation beams , plinth beams, bases for columns etc, pile and mass, complete all as specified and directed.
Material and labour for RCC (1:2:4) type B1( using 20 mm graded aggregate) for Columns, pillars, piers, posts and struts complete all as specified and directed.
Material and labour for RCC (1:2:4) type B1( using 20 mm graded aggregate) for Beams, cantilevers,bressummers, lintels over 1.5m span and struts complete all as specified and directed.
M&L formwork to sides of concrete in foundation , footings, bases of columns ,raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; flat ,vertical or to batter in fair finished surfaces of concrete, all as specified
M&L for formwork to sides of pillars,posts, struts, piers, columns and stanchions square,Rectaingular or polygonal with fair finished surfaces complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. in fair finished surfaces of concrete, all as specified and directed.
M&L for Precast cement concrete type 1:3:6 type C-1 (20mm graded stone aggregate) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work for concrete surface and finished even smooth without using extra cement.all as specified and directed.
M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished smooth even without using extra cement all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips all as specified and directed.
M&L for Mild steel TMT bars 6mm to 8mm ida cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips all as specified and directed.
Returning and filling in hard dense soil,including, spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.
Removal of excavated soil exc 1.50 Km but n.exc 5 Km and depositing where directed.
M&L for hard core of broken stone or boulder of gauge not exc 63mm deposited spread and leveled in layers not exc 15cm thick watered and rammed to true surface complete all as specified
M&L for sand cushioning above floor for cylinder bed complete all as specified and directed.
M&L for 100mm thick PCC 1:3:6 type C-2 using (40mm graded stone aggregate) as floor even and smooth with using extra cement, complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle Cleats or other connecting plates confirming Fe 410-W (Gde E- 250) quality- A and fixing complete all as specified and directed.
M&L mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes , bolted or welded attachement, confirming to Fe- 290 Gde E-165 complete all as specified and directed.
Material and labour for two coats of synthetic enamel paint over a coat of zinc chromate primer on new steel surfaces of any description over 10 cm width or girth including preparation of new steel surfaces complete all as specified
Supply & fixing factory made anodised powder coated aluminium sliding window and ventilator shutters, of any colour (Thickness or powder coating not less than 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
Supply & fixing factory made anodised powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F for 5.5mm thick sheet glass ordinary quality and glazing in frame in square not exc 0.5 sqm in each pane ,complete all as specified and directed.
S&F 1.25mm thick steel rolling shutters, with out ball baring, as specified including top cover anchoring rod, hasp and staple, shaft, pipe, brackets, and one shop coat of primer, erected in position as indicated complete with bevel gear box and crank handle complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8 type D-2 using (40mm graded stone aggregate) as sub base complete all as specified and directed.
M&L for cement concrete chequered tiles of size 30cm x 30cm x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors to match laid over and incl cement screed 15mm thick in 1:6 complete all as specified and directed.
[SCHEDULE 'A' PART-II [E/M WORKS]
Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., removing materials to store for keeping or for taking credit (Credit for above items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors etc.,
Taking down old unserviceable DBs and main switches along with MCBs and MCCBs complete all as specified and directed.
Material and labour for point wiring concealed/surface type in non-metallic FRLS ISI PVC conduit medium grade with 1.5 Sqmm size multi stranded fire retardant PVC sheathed FRLS copper conductor cable and PVC insulated FRLS cable of size 1.5 Sq.mm as earth continuity condutor including clamps, screws gutter/plug etc., with and incuding sheet steel terminal board with bakelite 3 mm thick sheet: One light point controlled by one 5 Amps switch one way Note :- Cutting chases for DB & making good to wall shall be inclusive of quoted rate.
All as per item No. 3.03 above, but one fan point controlled by one 5 Amps switch one way.
All as per item No. 3.03 above, but one 3/5 pin 5 Amp switch socket outlet on independent board.
Supply & fix Modular switch 6 Amp oneway flush type all as specified and directed.
S&F Modular Switch socket outlet 2 in 1,3 pin 5/6 Amp all as specified and directed.
S&F White cover plate of 3 or more module with frame and modular metal box flush to the surface all as specified and directed.
S&F White cover plate of 8 & more module with frame and modular metalbox flush to the surface all as specified and directed.
M&L for point wiring concealed/surface type in non mettalic FRLs ISI PVC conduit med grade with 2.5 sq mm size multi stranded FRLS PVC sheated copper conductor and PVC insulated FRLS copper cable of size 2.5 sq mm incl clamps, screws, gutties, plug, terminal boards with bakelite sheet 3 mm thick heavy duty as earth continuity conductor for 3/5 pin socket outlet 15 Amps all as specified and directed. Note:- Cutting chases for DB &making good to wall shall be inclusive of quoted rate
S&F 6/15 Amps Modular switch socket combination all as specified and directed.
S&F ceiling rose,3 phase /PVC/polycarbonate,isolated body all as specified and directed.
Supply & fix Industrial LED batten with CRCA body 40W LED 4'long including dismantling and taking down old unsv one complete all as specified and directed. Make Havells Cat No. STOUTPLUS 1200BS40WLED840SPCWH OR Equivalent in Bajaj / Philips / Crompton
S&F SP MCB 6 to 32 Amps C Curve complete all as specified and directed
S&F MCB, Double Pole, 63 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve incl dismentling taking down unsv one all as specified and directed.
S&F(concealled) MCB distribution board, IP 43 protection, Double door, metal enclosure, SPN, 230 Volts, 12 way incl dismentling taking down unsv one all as specified and directed.
M & L for wiring with 2 runs of 10 sqmm FRLS grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 10 sqmm FRLS grade PVC insulated copper conductor wire for earth continuity drawn in and including non metallic FRLS ISI marked PVC conduit medium grade dia with conduit accessories ,all as specified and directed. Note:Cutting chases for DB &making good to wall shall be inclusive of quoted rate
S&F LED tube light fitting with LED tube, 2'long, 10 watt, 230 Volts , complete with all accssories internally pre wired incl dismantling taking down unsv FTL/CFL fiitings all as specified and directed. Make Havells Cat No. LUMILINE+BS10 WLED830SPCSS OR Equivalent in Bajaj / Philips / Crompton
S&F exhaust fans AC single phase 230/240V of size 300mm sweep with louver all as specified and as directed.
S&F air circulator fan 230V single phase oscillating 450mm sweep suitable for wall mounting all as specified and as directed.
Cutting hole for exhaust fan of size 300mm and finish it with cement and plaster in the ratio of 1:6 all as specified and as directed.
M&L earthing with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts check nuts, washers of galvanised iron or steel all as shown in electrical plate connected to earth test point including excavation work with precasted PCC earth pit chamber and cover with GI protection pipe 40 mm dia light gde upto 7.5 mtr/20 mm dia tunnel pipe med grade but all as specified and directed
M&L for point wirng surface type in stove enamelled steel conduit with 1.5 sq mm size multi stranded fire retardant PVC sheathed FRLS copper conductor cable and PVC insulated FRLS cable of size 1.5 sq mm as earth continuity conductor including clamps, screws gutter / plug etc with and including sheet steel terminal board with bakelite 3 mm thick sheet all as specified and as directed.
M&L for point wirng surface type in stove enamelled steel conduit with 2.5 sq mm size multi stranded fire retardant PVC sheathed FRLS copper conductor cable and PVC insulated FRLS cable of size 2.5 sq mm as earth continuity conductor including clamps, screws gutter / plug etc with and including sheet steel terrminal board with bakelite 3 mm thick sheet heavy duty as earth continuity conductor for 3/5 pin socket outlet 15 Amps all as specified and directed( high bay light & Exhaust fan).
M & L for surface wiring with 2 x 10 sqmm (Nominal area) single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable drawn through in and including stove enamelled steel conduit medium grade with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 10 sqmm as earth lead and connected to earth dolly incl dismantling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. Note:-Two run of cable with one run of earth wire and one run of stove enamelled steel conduit will be measured as one length.
S&F LED flameproof fitting for twin a T8 tube of 16W each with retro LED tube all as specified and directed.
S&F SPN MCB 32 Amps C Curve complete all as specified and directed.
S&F double door SPNDB 8 way double door with 200 amp rated bus bar all as specified and directed.
S&F doubledoor SPNDB 4 way double door with 200 amp rated bus bar all as specified and directed.
S&F flame proof exhaust fan of size 457mm single phase 230V rated with louvers all as specified and as directed.
S&F Stove enamelled black Rigid steel conduit 25mm dia all as specified and as directed.
S&F Flame Proof weather proof rotary switch 16A,2pole with separate cable termination box incl dismantling and taking down all specified and directed Make :- Cat PartNo.SSPL/RI/1010 Shyaam or equivalent in Sudheer
S&F Highbay LED flame proof fitting 120W with electrical connections complete all as specified and as directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 3 core all as specified and as directed
S&F High density poly?ethylene pipes (HDPE)40mm dia of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors/trenches etc complete all as specified and as directed.
S&F 40mm GI pipes Heavy Class laid in trenches complete all as specified and as directed .
Excavation in Soft/Disintegrated rock( For road /hard standing cutting) .5 M in wide and depth for laying Cables passing through GI Pipe and getting out in soft loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm all as specified and directed.
M&L for supply and fixing of MS Cabinet Outdoor type suitable for wall mounting made up of 3mm MS sheet of suitable size must be dustproof and Water Proof with lock and key for housing upto 10 Nos Flame proof switches & 01 Nos DBs all as specified and as directed
Supply, installation, commissioning of metal top Deep Freezer with covertable type single phase 240 volt, 50 Hz, electric driven having cooling capacity 350 ltrs all as specified and directed.
Supply, installation, commissioning of metal top Deep Freezer with covertable type single phase 240 volt, 50 Hz, electric driven having cooling capacity 250 ltrs all as specified and directed.
M&L for point wiring surface type in non metalic FRLS ISI PVC conduit medium grade with 4 Sq.mm size multi stranded FRLS PVC sheated copper conductor and PVC insulated FRLS copper cable of size 4 Sq.mm including clamps, screws, gutties, plug, terminal boards with bakelite sheet 3mm thick heavy duty as earth continuity conductor for 3/5 pin socket outlet 15 Amps on independent board all as specified and directed.
AADHITYA ASSOCIATES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .