Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.1 LAccepted-AOC GOVT CONT V P O LEDA TEHSIL BALH DISTT MANDI | MANDI | HIMACHAL PRADESH | 175001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹9.3 L+₹21,872.18 (2.42%)Rejected-AOC BASSI UNDER BASSI POWER HOUSE DIVISION HPSEBL JOGINDER NAGAR | SHIMLA | HIMACHAL PRADESH | 171001 | L2 | Rejected-AOC L2 | |
| 3 | L3₹11.2 L+₹2.1 L (23.7%)Rejected-AOC BASSI UNDER BASSI POWER HOUSE DIVISION HPSEBL JOGINDER NAGAR | UNA | HIMACHAL PRADESH | 174301 | L3 | Rejected-AOC L3 |
Tender Value
₹10.0 L
EMD Value
₹9,989
Closing Date
12 Aug 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer
Generation Circle,HPSEBL ,Palampur
Tender for replacement of existing AC Sheet Roofing with precoated GI sheet roofing of various Qtrs block wise Total 5 Blocks 2Qtrs 1 Block in HPSEBL Colony at Bassi under Bassi Power House Division HPSEBL Joginder Nagar
2024_HPSEB_91120_1
HPSEBL/SE/GCP-07/2024-25
Open Tender
Civil Works
Item Rate
120 days
Bassi PH, Jogindernagar
As per Bid Document
8 documents required · 8 mandatory
₹590
₹9,989
16 Aug 2024
29 Jul 2024
13 Aug 2024
29 Jul 2024
12 Aug 2024
29 Jul 2024
29 Jul 2024 - 12 Aug 2024
Amount
Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of Asbestos Cement sheet.
Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. Not exceeding 4.00 metres in length. Sal wood beams
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete : Barge board (Upto 300 mm)
Providing and fixing 12 mm thick Marine plywood conforming to IS: 710 as in panelling and support work for Barge board
Providing and fixing commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately) commercial ply 5 mm thick.
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
SURESH KUMAR
Ankit Thakur Contractor
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .