RE-ALIGNMENT OF EXISTING SERVICE WIRE / POST -HT IN FAVOUR OF ASSISTANT ENGINEER ( 2167572500439 ) UNDER ELECTRICAL SECTION, PAIVALIKE

Fitting and providing one HT St+B13:D40ay for 11kV pole incl. digging & back filling pit.

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance ofmaterials.

Dismantling one Channel cross arm from existing DP structure, and bringing back to section store.

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Fitting one Additional2.4m/3m Channel cross arm (75x40x6mm), in existing 11kV DP incl. conveyance of materials

Stringing one km LT 3ph 4 wire line (Rabbit for Ph, Weasel for N) incl. fitting cross arm etc. removing touchings and conveyance of materials.

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Dismantling (without damage) one LT PSC/RCC Strut pole incl. removal of clamps and stacking.

Dismantling (without damage) one 11kV A type pole after disconnecting stays, strut etc. and stacking the same.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Providing Stay for LT poles incl. digging & back filling pit.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Soft Rock.

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Fitting one set AB switch and giving connection

Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.

Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Stringing of one km 11kV line with ACSR Raccoon (3 conductors) incl. cutting and removing tree branches wherever necessary.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Renewal of existing damaged/old 11kV Stay with new stay in place incl. excavation & backfilling of pit and conveyance.

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc.

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane

Please Enable Macros to View BoQ information