Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹49.4 L+₹1.6 L (3.33%)Rejected-Finance OPP KIRYAPA PARK NATIONAL HIGHWAY ROAD BARAMULLA J K 193101 | NA | NA | 193101 | L2 | Rejected-Finance Not being L1 |
Tender Value
Refer Docs
EMD Value
₹86,000
Closing Date
27 Dec 2021, 6:00 pmClosed
CWE, HQ 133 WORKS ENGRS
HQ 133 WORKS ENGRS PIN-913969 C/O 56 APO
REPAIR MAINTENANCE OF EXTERNAL WATER SUPPLY INCLUDING PUMPS AND MOTOR AT RAMPUR URI NAUGAM HAWS PATTAN GULMARG AND BARAMULLA UNDER GE 969 EWS
2021_MES_462252_3
CWEK-38/2021-22
Open Tender
Civil Works - Water Works
Item Rate
180 days
GE 969 EWS
Class D Category a ii
7 documents required · 7 mandatory
₹500
GE 969 EWS
₹86,000
HQ 133 WORKS ENGRS
31 Jan 2022
8 Dec 2021
29 Dec 2021
8 Dec 2021
27 Dec 2021
14 Dec 2021
8 Dec 2021 - 13 Dec 2021
13 Dec 2021
Amount
Excavation in trenches in hard/dense soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for laying water main pipe/ cables etc., getting out and forming bottom surface to required gradient, complete all as specified and as directed.
Removing excavated soil not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed.
Returning, filling in, soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each complete all as specified and as directed.
Taking down carefully old unserviceable existing GI/MS pipes including fittings from trenches, roads, walls etc. complete and making disturb surface of wall/road/trenches etc. good to match with existing for following size dia of pipes, complete all as specified and directed.
15 mm bore size
20 mm bore size
25 mm bore size
32 mm bore size
40 mm bore size
50 mm bore size
80 mm bore size
100 mm bore size
150 mm bore size
Relaying/refixing after repairing/Cleaning old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) with all new fittings for following size dia of pipes, complete all as specified and directed.
15 mm bore size
20 mm bore size
25 mm bore size
32 mm bore size
40 mm bore size
50 mm bore size
80 mm bore size
100 mm bore size
150 mm bore size
Material and labour for cutting existing steel tubing for alteraitons or additions (Each cut measured) for following size dia of pipes, complete all as specified and directed.
15 mm bore size
20 mm bore size
25 mm bore size
32 mm bore size
40 mm bore size
50 mm bore size
Material and labour for screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) for following size dia of pipes, complete all as specified and directed.
15 mm bore size
20 mm bore size
25 mm bore size
32 mm bore size
40 mm bore size
50 mm bore size
Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing , ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., laids in trenches, floor , wall and on ceiling, for following size dia of pipes, complete all as specified and directed.
15 mm bore size
20 mm bore size
25 mm bore size
32 mm bore size
40 mm bore size
50 mm bore size
80 mm bore size
100 mm bore size
150 mm bore size
Laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 80mm bore, with all necessary fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches complete all as specified and as directed. (80 mm bore size will be issued under Sch 'B' item, free for fixing) . .
Laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 100mm bore, with all necessary fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches complete all as specified and as directed. (80 mm bore size will be issued under Sch 'B' item, free for fixing) . .
Dismantling of old but serviceable pipe 150 mm bore from the site and transporting to the workshop for cutting of old and unsv flange and supply and fixing of new flange 6 mm with 150 mm bore GI pipe with jointing material such as nuts, bolts with washers of appropriate size with rubber gasket 6 mm thick of good quality complete all as specified and directed,
Dismantling of old but serviceable pipe 100 mm bore from the site and transporting to the workshop for cutting of old and unsv flange and supply and fixing of new flange with 100 mm bore GI pipe with jointing material such as nuts, bolts with washers of appropriate size with rubber gasket 6 mm thick of good quality complete all as specified and directed,
Supply and fixing MS flange suitable for 200 mm bore GI pipe line inlcuding welding with pipe , nuts , bolts gasket 3mm thick, etc. complete all as specified and directed.
Supply and fixing MS flange suitable for 150 mm bore GI pipe line inlcuding welding with pipe , nuts , bolts gasket 3mm thick, etc. complete all as specified and directed.
Supply and fixing MS flange suitable for 100 mm bore GI pipe line inlcuding welding with pipe , nuts , bolts, gasket 3mm thick, etc. complete all as specified and directed.
Supply and fixing MS flange suitable for 80 mm bore GI pipe line inlcuding welding with pipe , nuts , bolts, gasket 3mm thick, etc. complete all as specified and directed.
Supply and fixing MS flange suitable for 50 mm bore GI pipe line inlcuding welding with pipe , nuts , bolts, gasket 3mm thick, etc. complete all as specified and directed.
Supply and fixing in repair, cast iron fittings for pressure pipes such as Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150 mm dia complete all as specified and directed.
Material and labour run lead joint suitable for spigot and socket pipes 150 mm dia including taking out of old one, complete all as specified and directed
Material and labour run lead joint suitable for spigot and socket pipes 100 mm dia including taking out of old one, complete all as specified and directed
Supplying and fixing of cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 250 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc , including taking down of old one, complete all as specified and as directed.
Supplying and fixing of cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 200 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc , including taking down of old one, complete all as specified and as directed.
Supplying and fixing of cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 150 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc , including taking down of old one, complete all as specified and as directed.
Supplying and fixing of cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 100 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc , including taking down of old one, complete all as specified and as directed.
Supplying and fixing of cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 80 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc , including taking down of old one, complete all as specified and as directed.
Supplying and fixing of Cast iron Non Return valve without by pass arangement , Swing type, of Size 100 mm bore, confirming to IS 5312, flanged ends with nuts bolts, washers including taking down of old one, complete all as specified and as directed.
Supplying and fixing of Cast iron Non Return valve without by pass arangement , Swing type, of Size 150 mm bore, confirming to IS 5312, flanged ends with nuts bolts, washers including taking down of old one, complete all as specified and as directed.
Supplying and fixing of Cast iron Non Return valve without by pass arangement , Swing type, of Size 200 mm bore, confirming to IS 5312, flanged ends with nuts bolts, washers including taking down of old one, complete all as specified and as directed.
Material and labour for brick masonry valve pit nominal size 1.00 m x 1.00 m x 1.00 m (Internal dimensions) with one brick thick wall using sub class 'B' brick in cement mortar 1:6 over 20 cm thick PCC 1:4:8 type D-2 base with 15 cm off set on all sides including plastering of internal surfaces and exposed surfaces with 15 mm thick plastering in cement mortarf 1:4 two coat of white wash, PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) in coping, 50 x 50 x 6 mm thick mild steel angle iron frame , 5 mm thick MS plate cover with locking arrangement and painting exposed steel surfaces with synthetic enamel paint two coats over a coat of zinc chrome primer all as shown on TD drawings No CESZ/TD-1081/2011, complete all as specified and as directed. Note- TD drawing for valve pit is avaliable in HQ 133 and contractor can check the same before quoating rate.
Supply and fixing ball / roller bearing for pumps and motors of following capacity including taking down old bearing and re installation at site including testing on completion . . Make : NBC/SKF
Capacity 50 HP.
Capacity 75 HP.
Capacity 25 HP.
Material and labour for servicing monoblock/centrifugal pumping set including dismantling and opening at workshop, repair of defetive impeller , lock key ,replace the worn out bearing , rubber coupling , gasket 3 mm thick , glands packing ,stuffing box, mechincal seal and rusted nut, bolts etc assembling properly , greasing all movable parts, fixing in position, testing and commissioning all as directed for the following HP pumps:-
50 HP pump
75 HP pump
25 HP Capacity pump
2.5 HP Capacity pump
Material and labour for servicing of submersible motor including taking out, dismantling and opening at workshop, repair of defetive impeller , lock key ,replace the worn out bearing , rubber coupling , gasket 3 mm thick , glands packing ,stuffing box, mechincal seal and rusted nut, bolts etc assembling properly , greasing all movable parts, fixing in position, testing and commissioning all as directed for the following HP pumps
20 HP pump
30 HP pump
Dismantling and taking down unserviceable electric motor and pump from foundation and transporting to reputed workshop, taking out old and burnt winding wire and rewinding with super enameled copper winding wire of existing gauge and size with insulating materials, varnishing and baking etc, and re-fixing the same at site and re-alignment with coupling with pumping set , testing and commissioning for following capacity of electric motor and pump complete all as specified and directed.
03 HP Capacity
05 HP Capacity
10 HP Capacity
25 HP Capacity
30 HP Capacity
Dismantling the unserviceable electric motor of 415 volts, any make and type , capacity and transporting to reputed workshop, taking out old and burnt winding wire and rewinding with super enameled copper winding wire of existing gauge and size with insulating materials, varnishing and baking etc, re-fixing the same at site and re-alignment with coupling with pumping set , testing and commissioning complete all as specified and directed.
Cleaning of raw water collection tank of 1 x 20000 GLN capacity by removing mud/wet slit from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the slit and scale from floor,walls and washing out tank with alum mixed water and finally with clear water complete with white wash on walls complete all as specified and directed.
Cleaning of raw water collection tank of 1 x 40000 GLN capacity by removing mud/wet slit from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the slit and scale from floor,walls and washing out tank with alum mixed water and finally with clear water complete all as specified and directed.
Cleaning of treated water under ground collection tank of 2 x 62000 GLN capacity by removing mud/wet slit from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the slit and scale from floor, walls and washing out tank with alum mixed water and finally with clear water complete with white wash on walls complete all as specified and directed.
Cleaning of raw water collection tank of 1 x 50000 GLN capacity by removing mud/wet slit from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the slit and scale from floor,walls and washing out tank with alum mixed water and finally with clear water complete all as specified and directed.
Cleaning of treated water under ground collection tank of 2 x 20000 GLN capacity by removing mud/wet slit from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the slit and scale from floor, walls and washing out tank with alum mixed water and finally with clear water complete all as specified and directed.
Taking out old and unserviceble star delta starter suitable for 125 HP motor from the mounting and opening complete after draining out oil in a vessel , repair of old work out moving contact , bushing etc and re-installing at site , testing and commissioning complete as directed.
Taking out old and unserviceble star delta starter suitable for 100 HP motor from the mounting and opening complete after draining out oil in a vessel , repair of old work out moving contact , bushing etc and re-installing at site , testing and commissioning complete as directed.
Taking out old and unserviceble star delta starter suitable for 50-75 HP motor from the mounting and opening complete after draining out oil in a vessel , repair of old work out moving contact , bushing etc and re-installing at site , testing and commissioning complete as directed.
Taking out old and unserviceble star delta starter suitable for 25 HP motor from the mounting and opening complete after draining out oil in a vessel , repair of old work out moving contact , bushing etc and re-installing at site , testing and commissioning complete as directe.
Supply and fixing in repair of starter 2.5 HP motor from the panel and installing new at site, testing and commissioning complete as directed .
Cleaning with washing soda and removing all scale and dirt, etc, from tanks of capacity 500 ltrs hoisted at site in position carefully with soft wire brush and flushing including writing the date of cleaning at easily visible postion out complete as directed .
Cleaning with washing soda and removing all scale and dirt, etc, from tanks of capacity more than 500 but upto 1000 ltrs hoisted at site in position carefully with soft wire brush and flushing including writing the date of cleaning at easily visible postion out complete as directed .
Cleaning of OH tank of 50000 GLN capacity with bleaching and washing soda and removing all scale and dirt, etc, from tanks with soft wire brush and flushing out complete including writing the date of cleaning at easily visible postion out complete as directed.
Supply and fixing in repair, of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally, ISI marked, Class-2, for iron pipe of size 20mm bore complete all as specified and as directed.
Supply and fixing in repair, of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally, ISI marked, Class-2, for iron pipe of size 25mm bore complete all as specified and as directed. .
Supply and fixing in repair, of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally, ISI marked, Class-2, for iron pipe of size 40mm bore complete all as specified and as directed. .
Supply and fixing in repair, of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally, ISI marked, Class-2, for iron pipe of size 50mm bore complete all as specified and as directed. .
Supply and fixing in repair, of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally, ISI marked, Class-2, for iron pipe of size 80mm bore complete all as specified and as directed. .
Supply and fixing in repair, for PVC float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20mm bore complete all as specified and as directed.
Matereial and labour cast iron/ ductile iron pipe fittings upto 150mm bore for socket and spigot / flanged pipe such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, `Y` junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and as directed.
Matereial and labour for 80mm bore rubber gasket joint for jointing flanged pipes and fittings complete all as specified and as directed.
Material and labour for 100mm bore rubber gasket joint for jointing flanged pipes and fittings complete all as specified and as directed.
Material and labour for 80mm bore Lead wool joint for jointing flanged pipes and fittings complete all as specified and as directed.
Material and labour for 100mm bore Lead wool joint for jointing flanged pipes and fittings complete all as specified and as directed.
Material and labour for 80mm bore Run Lead joint for jointing flanged pipes and fittings complete all as specified and as directed.
Material and labour for 100mm bore Run Lead joint for jointing flanged pipes and fittings complete all as specified and as directed.
Material and labour for rubber or fibre board gasket joints for jointing 80mm bore flanged pipes and fittings complete all as specified and as directed.
Material and labour for rubber or fibre board gasket joints for jointing 100mm bore flanged pipes and fittings complete all as specified and as directed.
Material and labour for taking out sluice valves from 80mm bore pipe, refacing, regrinding and refixing, for pipes of 80mm bore complete all as specified and as directed.
Material and labour for taking out sluice valves from 100mm bore pipe, refacing, regrinding and refixing, for pipes of 100mm bore complete all as specified and as directed.
Taking down carefully old unserviceable existing GI pipes including fittings 15mm dia bore size from trenches, roads, walls etc. complete and making disturb surface of wall/road/trenches etc. good to match with existing , complete all as specified and directed.
Taking down carefully old unserviceable existing GI pipes including fittings 20mm dia bore size from trenches, roads, walls etc. complete and making disturb surface of wall/road/trenches etc. good to match with existing , complete all as specified and directed.
Taking down carefully old unserviceable existing GI pipes including fittings 25mm dia to 32mm dia bore size from trenches, roads, walls etc. complete and making disturb surface of wall/road/trenches etc. good to match with existing , complete all as specified and directed.
Taking down carefully old unserviceable existing GI pipes including fittings 40mm dia to 50 mm dia bore size from trenches, roads, walls etc. complete and making disturb surface of wall/road/trenches etc. good to match with existing , complete all as specified and directed.
Supply and fixing in repairs, change over switch 415 Volts in sheet metal enclosure, three phase four pole, 200 Amps, complete all as specified and as directed.
Supply and fixing in repairs, change over switch 415 Volts in sheet metal enclosure, three phase four pole, 100 Amps, complete all as specified and as directed.
Supply and fixing of MCCB of capacity 63 Amps, 4 pole, 415V, 25KA with adjustable microprocessor release in the existing LT panel including taking down old unserviceable MCCB complete all as specified and directed.
Supply and fixing of MCCB of capacity 32 Amps, 4 pole, 415V, 25KA with adjustable microprocessor release in the existing LT panel including taking down old unserviceable MCCB complete all as specified and directed.
Supply and fixing in repair of aluminium bus bar of size 20x5mm (total weight 1.78 Kg) in the existing LT panel complete all as specified and directed.
Supply and fixing in repair, of phase indicator neon lamp R-Y-B (Set of three) for 03 phase in the existing LT panel board, complete all as specified and directed.
Material and labour for internal panel wiring of suitable size of copper conducor not less than 4 Sqmm complete all as specified and directed.
Supply and fixing in repair, DOL starter of 03 HP motor , three phase complete all as specified and directed
Supply and providing gravel of size 12.5mm in layers not exceeding 15cm thick including Cleaning and washing of filter media complete, all as specified and directed
Supply and providing gravel of size 20mm in layers not exceeding 15cm thick including Cleaning and washing of filter media complete, all as specified and directed
Supply and providing gravel of size exceeding 1.50mm and not exceeding 4.75mm in layers not exceeding 15cm thick including Cleaning and washing of filter media complete, all as specified and directed
Supply and providing gravel of coarse sand of size not exceeding 1.18mm in layers not exceeding 15cm thick including Cleaning and washing of filter media complete, all as specified and directed
Cleaning of RCC/PS Over Head Reservoir/Under Ground Sump (Water) of 40000 Gln capacity by Hi-Tech system using High pressure Jet Pump of minimum 2 HP putting minimum pressure of 150 Bar to clean all sludge on walls, floors and treating with Hydrogen peroxide and applying ultra violet rays to make the tank becteria free complete all as specifed and directed. Note : Rate are deemed for writing work i.e. tank clean on (date) (month) and (year) font size should be 60 CM.
Cleaning of RCC/PS Over Head Reservoir/Under Ground Sump (Water) of 12000 Gln capacity by Hi-Tech system using High pressure Jet Pump of minimum 2 HP putting minimum pressure of 150 Bar to clean all sludge on walls, floors and treating with Hydrogen peroxide and applying ultra violet rays to make the tank becteria free complete all as specifed and directed. Note : Rate are deemed for writing work i.e. tank clean on (date) (month) and (year) font size should be 60 CM.
Repair to panel board indoor type/ outdoor type of size (1.50m x 0.90m x 045m), taking out all electric devices including electrical connections and to be kept in the safe custody , replaceing corroded sheet metel parts like base plate, top plate, front cover, etc with same gauge mild steel sheet including bending to match with the existing size, welding brazing and assembling including replacing all nuts, bolts in MCBs, refixing all elctric device, connecting with electric cable, proper lagging over cable including two coat of synthetic enamel paint over Zinc chrome primer on replaced sheet and one coat of synthetic enamel painting on old metal sheet and testing after repair complete, all as specified and directed.
Repair to leakage broken pipe or in joints or in sluice valve (flanged/spigot socket joints) of existing pipe (supply and distribution mains) CI pipes of sizes upto 200mm bore by earth work (excavation ,returning filling ,removal in any type of soil), dewatering,and fixing necessary suitable sizes of new ISI marked CI fitting i.e flanged/spigot tail pieces,collers ,Tee, bend ,to repair the leakage complete all as specified and directed. Note :- 1. Cost of C I fitting shall be measured and paid separetely under relevant item. 2. Excavation and earth work shall ne measured and paid separetely 3. Cost af all T & P and pumping set for dewatering shall be included in quoted rates. 4. Cost of lead joint,spunyarn,gland packing etc shall be measured and paid separetely under relevant item
Material and labour for cast iron pipes 150mm bore, with spigot ends centrifugally cast, Class LA, in any length, laid in trenches complete all as specified and as directed.
Material and labour for cutting 150/100mm bore cast iron pipes and reducing to required length for insertion of tee,bends elbow etc complete all as specified and as directed.
Supply and fixing Bearing of size 6307 for centrifugal pump complete all as specified and directed. Make : SKF, AAB or equivalent
Supply and fixing Bearing of size 6309 for centrifugal pump complete all as specified and directed. Make : SKF ,AAB or equivalent
Supply and fixing Bearing of size 6311 for centrifugal pump complete all as specified and directed. Make : SKF ,AAB or equivalent
Supply and fixing Foot valve for pipe flanged / thread type ISI marked complete with nuts,bolts and washers packing materails etc suitable for 80mm GI pipe complete all as specified and directed.
Supply and fixing Foot valve for pipe flanged / thread type ISI marked complete with nuts,bolts and washers packing materails etc suitable for 50mm GI pipe complete all as specified and directed.
Supply and fixing Foot valve for pipe flanged / thread type ISI marked complete with nuts,bolts and washers packing materails etc suitable for 100mm GI pipe complete all as specified and directed
Opening of inlet and outlet manhole of pressure filter plant capacity 5000 glns/hr installed at AP Kichama including supply and replacement of complete unserviceable filter media gravel /quartzs and of different sizes in layers as per manufactures specification /make of plant and internal surfaces of plant including painting of two coat with synthetc enamel paint over a coat of red oxide primer of approved make/brand complete all as specified and directed.
Material and labour for disconnecting and dismantling of unserviceble Centrifugal pumping set of single stage/multi stage from site and transport to the workshop for repair/replacement of defective parts like impeller, shaft, lock key, worn out bearing, rubber coupling, gasket 3 mm thick, glands packing, stuffing box, mechinical seal and rusted nut, boltss etc and reasembling properly, greasing all movable parts, fixing in postion, testing and commissioning at site all as directed for the following capacity of pumps. Note: (i) A warranty of one year shall be given for satisfactory performance of pump set (ii) Alternative arrangement of pump set shall be provided by the contractor for continious water supply till the pump get repaired and installed at site. (iii) Contractor shall ensure that pump get repaired within five days otherwise, a penalty of Rs 1000 per day shall be deducted from the contractor due. (iv) All the T&P items i.e. chain pully block, triport, etc. shall be arranged by the contractor for the completion of job and included in the quoted rate
Upto 2 HP Pump.
3 HP to 5 HP Pump.
10 HP to 15 HP Pump.
25 HP to 30 HP Pump.
50 HP Pump.
75 HP Pump.
100 HP Pump.
Disconnectingthe defective/burnt electric induction motor & dismantling from the foundation, shifting to workshop for rewinding the electric induction motors suitable to run on 415V, AC, 50 Hz supply with copper enameled copper wire of suitable gauge/size including proper insulation, , warnishing, drying, greasing bearing, etc and making connection to the terminal plate complete fo the following cat of electric motor. Note: (i) A warranty of one year shall be given for satisfactory performace of Motor (ii) Alternative arrangement of motor shall be provided by the contractor for continious water supply till the motor get repaired and installed at site. (iii) Contractor shall ensure that motor get repaired within five days otherwise, a penalty of Rs 1000 per day shall be deducted from the contractor due. (iv) All the T&P items i.e. chain pully block, triport, etc.and other minor parts required deemed to be inclusive of quoted rate
Up to 2 HP Pump.
3 HP to 5 HP Pump.
10 HP to 15 HP Pump.
25 HP to 30 HP Pump.
50 HP Pump.
75 HP Pump.
100 HP Pump.
Material and labour for MCCB 4 pole, 415V, fixed type, 200 Amps with breaking capacity 36 KA and connecting to bus bar and cable end terminations with suitable lugs, including disconnecting and removing the old unserviceable MCCB complete, all as specified and as directed.
Material and labour for GI Union of size 20 mm complete all as specified and directed.
Material and labour for GI Union of size 15 mm complete all as specified and directed.
Material and labour for GI Elbow of size 20 mm complete all as specified and directed.
Material and labour for GI Socket of size 20 mm complete all as specified and directed.
Material and labour for GI Tank Nipple of size 20 mm complete all as specified and directed.
Material and labour GI Reducing Socket of size 15/20 mm complete all as specified and directed.
Material and labour for Rubber Gasket suitable for upto 200 mm CI/GI pipe complete all as specified and directed.
Supply and fixing Motor Fan suitable for upto 30 HP complete all as specified and directed.
Supply and fixing Pressure Motor of capacity 1 HP complete all as specified and directed.
Supply and fixing for Rubber Coupling heavy duty suitable for upto 20 HP Pump Motor complete all as specified and directed.
Supply and fixing for Rubber Coupling heavy duty suitable for 25 to 30 HP Pump Motor complete all as specified and directed.
Supply and fixing for Rubber Coupling heavy duty suitable for 50 to 75 HP Pump Motor complete all as specified and directed.
Supply and fixing for Rubber Coupling heavy duty suitable for 100 HP Pump Motor complete all as specified and directed.
Supply and fixing for Single Phase Preventor suitable for upto 100 HP Motor complete all as specified and directed.
Repair/Maintenance of vertical type pressure filters of capacity upto 12500 Gln/Hr at water point at HAWS, Gulmarg with the following process. (a) Dismentling /Opening the Filteration plant in let & out let alongwith connected pipe line, sluice valve, Butterfly valves of any size, Nut & bolts and other connected items completely. (b) Removal of complete filter media from Filteration plant and deposit as directed. (c) Taking down old un serviceable PVC nozzels from filtration plant. (d) Drying the filteration plant internally and externaly and painting two coat with enamel paint over a coat of red oxide primer after complete removal of old treatment and prepration of old steel surface. (e) Repair/Maintenance of nozzle supporting plate inside the filter plant including scraping and cleaning the supporting plate and and supply and fixing of new Gun Metal nozzels of existing make and description as directed. (f) Filling the filtration plant with filter media in four layers of 30cm thick. First layer filled with Discard rock of size 70mm, second layer filled with 6mm thick drainage gravel, third layer filled with 0.7 mm size seperating gravel and fourth layer filled with filteration sand as directed. (g) Fixing the in let and out let openings, fixing the existing in out pipe lines, slucive valves with necessary gaskets & nut, bolts and testing the filteration plant in presence of Engr-in-Charge. Note :- (i) During the whole process of maintenance of filtration plant, contractor shall take all safety measure for men employed and equipment replaced and refixed as per the existing rules and policies. (ii) The rates quoted by the contractor in this item includes all above process, repairing defective parts, replacing unserviceable parts and filter media, etc. for running the Filteration plant efficiently including wirting capacity, Date of cleaning month and year and next date of cleaning due..
M/S GHULAM RASOOL LONE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .