SPECIAL REPAIRS TO BUILDING NO P-4 AT KATARIBAGH KOCHI

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and as directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

S &F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to fe -410W (gd E-250) quality complete all as specified and as directed .

S&F fe -410W (gde E-250) quality roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including complete all as specified and as directed .

M&L for painting to surfaces of new or old steel and iron work of any description, exc10cm in width or girth,and applying two coats of anti corrosive paint over a coat of redoxide primer all as specified and as directed .

M & L Pre-painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50mm thick, of any colour, having tensil strength of 550 Mpa as in roof fixes with self tapping screws all as specified and as directed .

S&F Pre- painted plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws all as specified and as directed .

M&L for PCC type B-0, 1:2:4 (12.5 mm graded aggregate) as in mass concrete top of wall or chamfered on edges ,including necessary form work etc.complete all as specified and as directed .

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover filllets complete all as specified and as directed.

S&F Anodized aluminium snap grid frame work for false ceiling all as specified including GI hangers 6 mm dia (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasterners 12.5mm dia 40mm long complete all as specified and as directed.

S&F 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed to ceiling frame all as specified and as directed .

Taking down chowkats or frames with shutters exc 1.5 sqm but not exc 4 sqm each. (without taking off shutters from the frames) all as specified and as directed .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as psecified and as directed by .

S&F in repairs anodised aluminium sliding window and ventilator frame double shutter (Glass and wire mesh) without sash bar, including all necessary jointing cleats, hold fasts, rubber gasket, anodised snap beading, anodised aluminium fitting such as aluminium fitting such as 'F' channel if required for wire mesh or aluminium grill, aluminium handle, locking arrangement tec based on Hindalco catalogue No: 4087 - 92.36x29.70x1.20mm for 3 Track Bottom , 4099 - 92.36x29.70x1.20mm for 3 Track Side & Top , 9395 - 39.00x20.00x1.10mm for Shuter Vertical , 3994 - 41.00x20.00x1.20 for Shutter Top & Botam, 9779 - 39.00x20.00x1.16mm for Shutter Vertical Inter Lock complete all as specified and as directed.

S&F 5 mm thick plain sheet glass ordinary quality glazing with oil putty and glazing pins/spring clips in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F anodised aluminium grill, having mesh size 50x50mm made out of 6mm wide, 3mm thick aluminium section including 'U' clips and all assessory complete all as specified and as directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples to wooden shutters or steel frames including wooden beads complete all as psecified and as directed .

M&L 1st class hard wood Palin , solid , straight chowkats and frames , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed .

S&F 40mm th, 1st class HW plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as psecified and as directed by Engr -in-charge.

S&F 30mm th, 1st class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. complete all as psecified and as directed .

S&F 100mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed .

S&F 150mm long Brass handles, cast type, polished bright complete all as specified and as directed.

S&F 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed .

S&F 200mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed .

S&F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed .

M&L for mild steel flat iron of size 25 x 3mm as in hold fast for fixing door frame etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed .

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) for embedding of hold fast etc.including necessary form work complete all as specified and as directed .

M&L for preparation of newly plastered internal wall surface ,scrubbing by using nylon/jute/wire brushes/scrapper blades or by using sanding machines to remove algae, moss, fungus and loosely adhered particles like dust, efflorescence etc and washing the surface with pressure jet washers and surface allowed to dry etc complete all as specified and as directed.

M&L for application of one coat of primer and allowed to dry overnight to receive first coat of acrylic interior emulsion comple emulsion paint complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of acrylic interior emulsion paint on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic interior emulsion paint complete all as specified and as directed.

M&L for application of second coat of acrylic interior emulsion paint on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) for embedding of hold fast etc.including necessary form work complete all as specified and as directed .

M&L for preparation of newly plastered internal wall surface ,scrubbing by using nylon/jute/wire brushes/scrapper blades or by using sanding machines to remove algae, moss, fungus and loosely adhered particles like dust, efflorescence etc and washing the surface with pressure jet washers and surface allowed to dry etc complete all as specified and as directed.

M&L for preparation of new or old plastered external wall surface ,scrubbing by using nylon/jute/wire brushes/scrapper blades or by using sanding machines to remove algae, moss, fungus and loosely adhered particles like dust, efflorescence etc and washing the surface with pressure jet washers and surface allowed to dry etc complete all as specified and as directed.

M&L for application of one coat of primer with sealant properties using "Seal-O-Prime" or "Weather coat exterior primer" ( of Berger make or equivalent make in other makes ) and allowed to dry overnight to receive first coat of emulsion paint complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of exterior emulsion antifungal paint on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of emulsion paint complete all as specified and as directed.

M&L for application of second coat of exterior emulsion antifungal paint on wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface complete all as specified and as directed. Note for Item No.20 to 23 :- Application through company authorised applicator or under company supervision using modern tools and techniques shall be ensured. contractor shall submit performances guarantee for a period of five years after completion as per prescribed format .

M&L for Cement concrete Type D2 1:4:8 (40 mm greded Agg regate) as in fundations, filling and mass-concrete complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry Type B1 1:2:4 (20mm graded aggregate) with solid blocks, Set in cement mortar 1:4 exc. 10 cm in width and setting in mortar, complete all as specified and as directed.

M&L for RCC Type B1 1:2:4 (20 mm graded stone aggregate) for lintel complete all as specified and as directed.

Use and waste form work formwork to sides and soffits of floor or roof beams, mid beam, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, loverhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and as directed.

M&L for rendering 15mm thick on brick or concret wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for non-skid coloured tiles of size 300x300x7 to 8mm thick in floor set & jonted in cement slurry and pointed with white or coloured cement to match including 15mm thick screed bed or bedding layer in cement 1:6 all as specified and as directed.

M&L glazed ceramic colour tiles in vertical surfaces 450 x 350x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match 10mm thick screed bed or beding layer in cement mortar (1:4) all as specified and as directed .

S&F Vitreous China wash down water closet pan (pedestal pattern), white with 'P' or 'S' trap including fixing seat and cover for pedestal pan, providing and fixing PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe of steel tube or polyethylene including jointing to socket of flushing rim (with and including India rubber cone joint, if flushing rim connection is nozzle pattern) and connecting pipe to union of flushing cistern, in let and overflow pipes connecting only to flushing cistern including taking down old SWR pipe as required, complete all as specified and as directed .

S&F vitreous china wash basin, 550x 400mm size, white flat back including 32mm chromium plated waste coupling and MS brackets etc. complete all as specified and as directed .

S&F corner glass shelf of 5mm thick plain sheet glass and with brass, chromium plated bracket complete all as psecified and as directed .

S&F pillar cock quarter turn 15mm dia bore complete all as specified and as directed. (MAKE :Jaguar or equivalent)

S&F waste pipe 32X800mm complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F 40mm dia Low density polyethylene (LDPE) pipes of pressure rating complete all as specified and as directed .

S&F solid PVC door frame of size 50x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification complete all as specified and as directed .

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed .

S&F aluminium anodized barrel tower bolts, of extruded section of size 150mm long complete all as specified and as directed .

S&F 150mm long aluminium handles, cast type, anodised fixed complete all as specified and as directed .

S&F looking mirror with PVC backing of size 45x60cm complete all as specified and as directed.

M&L Providing precast reinforced cement concrete in cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces, Type B1 ,1:2:4 (20mm graded aggregate) set in cement mortar 1:4 complete all as specified and as directed . Note :- Reinforcement shallbe measured and paid separately.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shap required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed .

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, man holes etc and getting out in soft/loose soil complete all as specified and as directed .

M&L cement concrete bed to 150mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6 type C2 with 40mm graded aggregate complete all as specified and as directed .

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in-charge.

S&F 110mm bore PVC (SWR) Bends any radius complete all as specified and as directed .

Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25cm thick (Soft/loose soil) complete all as specified and as directed by Engr-in-Chrge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed .

S&F anodised aluminium partition (area of panel not exceeding 1.50 sqm each) frame without sash bar, including all necessary jointing cleats, hold fasts, hinges with fixing clips, rubber gasket, anodized snap beading, anodized aluminium fittings, locking arrangement etc. based on Hindalco catalogue No: 9223 - 63.50x38.10x2.00mm for Single Partition (Vertical & horizontal Section), complete all as directed .

M&L 9mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber/aluminium frame work complete all as specified and as directed .

S&F in repairs for anodised aluminium door frame without sash bar, including all necessary jointing cleats, hold fasts, hinges with fixing clips, rubber gasket, anodized snap beading, anodized aluminium fittings, locking arrangement etc. based on Hindalco catalogue No: 9258 - 50x44.50x1.80mm for Door Vertical, 9286 - 50x45x1.50mm for Door top & middle , 9246 - 100x44.50x1.85 for Door Bottom complete all as directed.

Surface dressing n.exc 15 cm deep in soft/losse soil complete all as specified and as directed .

M&L for hard core of guage exc.63 mm deposited,spread and levelled in layers n exc.15 cm thick,watered and rolled/rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick cement concrete type D2, 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed .

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling and ramming including watering as specified complete all as specified and as directed .

M/L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, with grey cement and pigment complete all as specified and as directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceahle tiles to store and rubbish off the permises complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10 mm thick(square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 15mm thick screed bed or bedding layer in cement 1:6 on floors for laying floor finish complete all as specified and as directed .

All as per item No.69 above, but vertical surface including 10mm thick screed bed or beding layer in cement mortar (1:4) on vertical surtaces to receiving wall tiles complete all as specified and as directed by Engr-in-charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed .

Material and labour for point wiring for one light/fan point with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC conduit medium grade ISI marked concealed of suitable size with all accessories and sunken box of 1.6 mm thick and 60 mm depth pressed steel box factory made for mounting of switch, socket and fan regulator with modular frames covers including chases cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed .

All as per item No. 77 above but for one bell point controlled by one 5 Amp bell push on independent board complete all as specified and directed.

All as per item No. 77 above but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No. 77 above but for one 5 pin 5 Amp socket outlet point on same board complete all as specified and directed.

All as per item No.77 above but using with 2.5 sqmm copper conductor cables multistranded (FRLSH) PVC insulated, unsheathed cable and including 2.5 Sqmm copper conductor cable multistranded (FRLSH) PVC insulated and unsheathed cable as earth continuity wire and connecting to common earth dolly for one 6 pin 15 AMp socket outlet point on independent board complete all as specified and directed.

Supply and fix in replacement ceiling rose surface bakelite 65 x 50 mm 3 terminals 240 volt 50 Hz complete all as specified and directed.

S&F in replacement modular type sockets 6 Amp-2/3 pin combined 2 module complete all as specified and directed.

S&F in replacement switch modular type single pole, 6 Amps, one way all as per specified & directed.

S&F in replacement modular sockets 6 Amp/16 Amps, 2/3 pin combined 2 module complete all as specified and directed.

S&F in replacement switch modular type 1 module, 16 Amps, one way all as per specified and directed.

S&F in replacement electric bell, AC 230 V, single pole complete all as specified and as directed.

S&F in replacement bell push modular 6 Amps, 1 module, all as specified and directed.

M&L taking down 450/350/300 mm sweep exhaust fan, preparing the surfaces of exhaust fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No. fixing the fan to its original location, connecting up including provision of cable form ceiling roses to connector to fan complete all as specified.

Supply and fixing 20 watt LED T-8 tubular lamp with extruded aluminium /pc body and PC diffuser and inbuilt driver.including mirror lite batten suitable for T8 lamps , suitable connection from ceiling rose to tube lamp all as specified and directed Cat part No. DMLNILT8-16 tube,LTT8-20 batten of Crompton or Philips, Wipro.

Supply and fixing LED pearl round recessed LED flat panel 18 Watt, 240 Volt, 50 Hz all as specified and directed. Cat part No. -LD 90-231-XXX-65XX of Wipro or Philips, Crompton.

Material and labour for submain wiring with 2 runs 4 Sq mm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC concealed conduit not less then 25 mm with all accessories , one run of 4 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Three runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

Material and labour for submain wiring with 2 runs of 10 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC concealed conduit not less than 32 mm with all accessories on surface, one run of 10 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Three runs of 10 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

Earhing complete with galvanized steel earth plate electrode 600X600X6mm buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 M below ground level, connected to galvanized earth lead wire 4 mm , by means of galvanized iron or steel bolts, nuts, check nuts and washers, and conneced to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh charcoal or coke and common salt in alternate layers, of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C-1 , 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia reinforced bar 15 cm C/C and earth lead handle protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc.50m and necessary testing,including taking down old unserviceable earthing complete all as shown on electrical plate no.3 of MES SSR Part I and as directed.

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp,240 volts ,50 Hz inculding taking down old one complete all as specified and directed.

S&F in repair Sheet metal enclosure for MCB DB, SPN, 8 ways, double door, with 200 amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified.

Suppy and fixing in repair vertical TPN DB with MCCB incomer 04 way suitable for upto 125 Amp MCCB IP-43, 415 Volts, insulated vertical bus bar with suitable colour all as specified and directed. Cat Part No. DBVTL004DD of L&T or Legrand, Indoasian.

Supply and fixing 4 pole MCCB 80 to 100 Amps, Thermal realease range 415 volts ,50 Hz, 18 KA including all electrical connection all as specified and as directed Cat part No -CM90518OOKO of L&T ,legrand,Indoasian

S&F in repair MCB two pole 40 Amp, 240 Volts, 10 KA including all electrical connection all as specified and as directed cat part no. BB2040DC of L&T or Legrand, Indoasian.

S&F in repair MCB SP 32 Amp, 240 Volts, 10 KA including all electrical connection all as specified and directed cat part no - BB10060B to BB10320B of L&T or Legrand, Indoasian.

Supply and fixing ceiling fan complete with hanging Rod and accessories 230 V,1200 mm sweep.ISI marked BLDC Fan Cat part No.Energos 32 of Bajaj, or Crompton,V-guard.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver including cutting the suitable hole for fixing exhaust fan to match with existing surface all as specified and as directed. Cat part No. Trans Air 12" of Crompton or Bajaj,V- gaurd .

Supply & fixing building security light fitting LED 30 W ,IP 65,240 volts ,50 Hz including GI bracket for wall mounting all as specified and directed. Cat part No:-LSTS-30-CDL of Crompton or Philips,Bajaj.

Supply and fix on wall/ concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents of size 25 mm dia including taking down old one complete all as specified and directed. Make : Supreme/ Eurotech/ Astral/ SFMC

All as per item No.104 above but of size 20 mm dia

Supply and fixing of bib cock, CP quarter turn with flange and areator, fancy type long nose with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm and taking down old, complete all as specified and as directed by the Engineer-in-charge. (Make : Model No. F2004152 of Cera or Prayag/ Hindware/ Jaguar)

Supply and fixing of two way bib cock, quarter turn with flange and areator of size 15 mm and taking down old unserviceable cock of any make, complete all as specified and as directed . (Make : Model No. F2004163 of Cera or Prayag/ Hindware/ Jaguar)

Supply and fix concealed stop cock regular body, quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20 mm and taking down old unserviceable one, complete all as specified and as directed.(Make : Model No. F2002363 of Cera or Prayag/ Hindware/ Jaguar)

Supply and fixing 15 mm angle valve, half turn with flange type chromium plated for fixing accessories for CPVC pipe and taking down old unserviceable one, complete all as specified and as directed.(Make : Model No. F2004201 of Cera or Prayag/ Hindware/ Jaguar)

Supply and fixing of telephonic hand shower 70 mm dia with wall hook and 1.5 hose including taking down old one, all as specified and directed. Model No. F7030301 of Cera or Hindware/ Jaguar.

Supply and fixing PVC connection pipe 16 mm dia (outer) 450 mm long cold water and taking down old one complete with brass union on both sides to suit 15 mm GI pipe and taking down old one, complete all as specified and directed .

Supply and fixing health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe, including taking out old one all as per specified and directed . (Make : Model No. F8030102 of Cera or Prayag/Hindware/Jaguar)

Supply and fixing pillar cock, with 300 mm long extended body with arreator quarter turn including taking down old one all as per specified and directed by engineer-in-cherge (Make : Model No. F1003102 of Cera or Prayag/Hindware/Jaguar)

S&F wall mixer (3-in-1) with arrangement of both telephonic shower and over head shower with 210 mm long bend pipe and taking down old unserviceable one complete all as specified and as directed . Make : Cera Model No. F2002403 or Prayag/Jaguar)

M/L for cutting chasses on walls floor etc not exceeding 20 cm girth and making good the disturbed surface to match with the existing after removing the existing concealed pipe/laying new pipe, complete all as specified and directed .

Taking down Geyser of capacity 25/50 ltrs of any make / from any height from its existing positio duly disconnected inlet/ outlet water connection and electric connection stored in safe custody including refixing the same on its existing position and making connection inlet/outlet water connection complete all as specified and directed .

M&L for CPVC ball valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings and taking down old unserviceable ball valve complete all as specified and directed. Make : Supreme/ Eurotech/ Astral/ SFMC

All as per item No. 117 above but of size 20 mm dia

Albert Rebello and Company

STANDARD ENGINEERING

SUKU CONSTRUCTIONS