Construction of Morgue at Udalguri Civil Hospital in Udalguri District. (Package No. TN_54_2)

EARTH WORK 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundation trenches or drains (not exceeding 1.5 m width or 10 sqm on plan), including dressing of sides and ramming of 2.8.1 All kinds of soil

2.27 Supplying and filling in plinth with sand under floors, including watering.

REINFORCED CEMENT CONCRETE WORKS 5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 5.1.2 1:1:5:3 (1 Cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)

5.3 Reinforced cement conerete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plam window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shutterung finishing and reinforcement with 1:1:5:3(1 cement: 1.5 coarse sand(zone-III) derived from natural sources 3 graded stone aggregate

4.1 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 12.5mm nominal stze derived from

TIMBER SHUTTERING (FORMWORK) 5.9 Centering and shuttering including strutting, propping etc. and removal of form for A 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete

5.9.3. Suspended floors, roofs, landings, balconies and access platform

5.9.5. Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.6. Columns, Pillars, Piers, Abutments, Posts and Struts

BRICK WORK: Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 11 1.2 1:6 (1cement: 6 coarse sand).

6.1. Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7 5 in foundations and plinth in 6.1.1. cement mortar 1:4 (1 cement 4 coarse sand)

6.12. Half brick masonry with common burnt clay F.PS (non modular) bricks of class designation 7.5 m in foundations and plinth in. 6.12.2. Cement mortar 1:4 (1 cement 4 coarse sand)

6.13. Half brick masonry with common burnt clay F.PS (non modular) bricks of class designation 7.5 m superstructure above plinth level up to 6.13.2. Cement mortar 1:4 (1 cement 4 coarse sand)

DOOR FRAME 10.14. Providing and fixing pressed steel door frames conforming to IS: 4351. manufactured from commercial mild steel sheet of 1.60 mm thickness. including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm. pressed mild steel welded or rigidly fixed together by mechanical means. including M.S. pressed butt hinges 2.5 mm thick with mortar guards, 10.14.1.1. Fixing with adjustable lugs with split end tail to each jamb

9.12.1. Providing and fixing ISI marked flush door shutters conforming to IS 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply vencering with vertical grains or cross bands and face veneers on both faces of shutters 9.21.1. 35 mm thick including IS1 marked Stainless Steel butt hinges with necessary screws

P.V.C DOORS 9.14.1. Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 nm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 PVC frame strin with PVC solvent cement on the back of the

STEEL WORK 5.22. Steel reinforcement for RCC work including straightening, cutting. bending, placing in position and binding all complete upto plinth 5.22.6. Thermo-Mechanically Treated bars of grade Fe-500D or more.

5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

10.16. Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer, including welding 10.16.1. Hot finished welded type tubes

FLOORING & SKIRTING/DADO 11.41. Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades. laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc, complete. 11.41.2 Size of Tile 500x500 mm

11.2 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 11.20.4 Ordinary cement without any pigment

8.31 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 13 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

PLASTERING 13.4. 12 mm cement plaster of mix: 13.4.1. 1:4 (1 cement 4 coarse sand)

13.5. 15 mm cement plaster on rough side of single or half brick wall of mix 13.5.1. 1:4(1 cement 4 coarse sand)

FINISHING AND PAINTING 13.42. Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification 13. 42.1 Two or more coats on new work

13.43. Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface 13.43.1 Water thinnable cement primer

13.44 Fishing walls with water proofing cement paint of required shade 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)

General purpose (Asian paint /Berger paint ICT paint/ J & N paint/ Nerolac)

13.52. Finishing with Epoxy paint (two or more coats) at all locations Prepared and applied as per manufacturer's specifications including appropriate 13.52.1. On steel work

9.48. Providing and fixing M.S. grills of required pattern in frames of windows etc with MS flats, square or round bars etc. including priming coat 9.48.1. Fixed to steel windows by welding

ANODISED ALUMINIUM WORKS 21.1. Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at unctions, ie at top, bottom and sides with required EPDM rubber neoprene gasket etc Aluminium sections shall be smooth, rust free straight, mitred and jointed mechanically wherever required including cleat angle. Aluminum snap beading for glazing/paneling, etc.

21.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS 12823 Grade 1 Type II, in panelling fixed in aluminum doors, windowsshutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge 21.2.1 Pre-laminated particle board with decorative laminationon one side and balancing lamination on other side sqm 965.10

21.1 Providing and fixing double glazed hennetically sealed glazing m aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.

DOORS FITTINGS 9.97. Providing and fixing aluminium tower bolts. ISI marked, anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or 9.97.1. 300 X 16 mm

9.1. Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or 9.100.1. 125 mm

9.101. Providing and fixing aluminium hanging floor door stopper, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary Screws etc complete 9.101.1 Single rubber stopper

PLINTH PROTECTION WORKS 4.17.Making plinth protection 50mm thick of cement concrete 1:3:6 (1) cement 3 coarse sand (zone-III) derived from natural sources 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 7

2.35.3. Treatment of soil under existing floors using chemical emulsion @one litre per hole. 300 mm apart mcluding drilling 12 mm diameter holes and plugging with cement mortar 1 21cement 2 Coarse sand) to match the existing floor: 2.35.3.1 With Chlorpynphos/Lindane E.C. 20% with 1% concentration

12.24. 12.24. Providing and fixing insulating board ceiling of approved quality with necessary nails etc complete (frame work to be paid separately): 12.24.3 Flame retardant face insulating board 12.24.3.1 12 mm thick

12.51 Providing and fixing precoated galvanised iron profile sheets (size. shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12.51. Providing and fixing precoated galvanised steel sheet roofing accessories 0 50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling self tapping screws complete. 12.51.1 Ridges plain (500-600mm)

SANITARY & WATER SUPPLY WORK 17.1. Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

17.7. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

17.11 Providing and fixing white vitreous china laboratory sink with C.I.and 40mm C.P. brass trap with necessary C.P. brass unions complete.including painting of fittings and brackets, brackets. C.P. brass chain with rubber plug, 40 mm C.P brass waste cutting and making goodthe wall wherever required :17.11.2 Size 600x450x200 mm each 5610.85

17.32. Providing and fixing mirror of superior glass (of approved Each quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: 17.32.1 Circular shape 450 mm dia

17.73. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

17.7. Providing and fixing PTMT Bottle Trap for Wash basin and sink. 17.70.1 Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling. 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms

17.36. Providing and fixing soil, waste and vent pipes: 17.35.1 100 mm dia 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729

75 mm diameter: 17.35.2.1 Sand cast iron S&S pipe as per IS: 1729

17.38 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.38.1 100 mm dia 17.38.1.1 Sand cast iron S&S as per IS- 1729

75 mm dia 17.38.2.1 Sand cast iron S&S as per IS - 1729

1.39. Providing fitting and fixing 110mm dia. PVC cowel with ISI Each make complete as directed and specified.

1.40 .Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 17.60.1 100 mm inlet and 100 mm outlet 17.60.1.1 Sand cast iron S&S as per IS: 3989

17.60.2 100 mm inlet and 75 mm outlet 17.60.2.1 Sand cast iron S&S as per IS - 3989

INTERNAL WATER SUPPLY WORKS 18.9. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes. having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement. trenching. refilling & testing of joints complete as per direction of Engineer in Charge. 18.9.4 32 mm nominal dia Pipes

18.8. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes. having thermal stability for hot & cold water supply. including all CPVC plain & brass threaded fittings, i/e fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction.

18.8.2 20 mm nominal dia Pipes

18.8.3 25 mm nominal dia Pipes

18.5. Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 18.50.1 15 mm nominal bore

18.52. Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore

18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 18.17.1 25 mm nominal bore

18.17.3 40 mm nominal bore

INTERNAL WIRING 1.10. Wiring for Light point/fan pointexhaust fan point/callbell point with 1.5 sqmm FRLS pvc insulated copper conductor single core cable in surface/recessed medium class pvc conduit with modular switch,modular plate,suitable GI Box and earthing the point with 1.5 sqmm FRLS pvc insulated copper conductor single core cable etc. as required. Group A

Group B

Group C

1.14. Wiring for circuit /Submain wiring along with earth wire with the following size of FRLS pvc insulated copper conductor,single core cale in surface/recessed medium class pvc conduit as required. 1.14.2 2x2.5 sqmm +1x2.5 sqmm earth wire

1.14.3 2x4 sqmm +1x4 sqmm earth wire

1.14.4 2x6 sqmm +1x6 sqmm earth wire

1.14.4 2x10 sqmm +1x6 sqmm earth wire

1.14.10. 4x10 sqmm 2x6 sqmm earth wire

1.21. Supplying and fixing of following size of Medium class pvc conduit along with acessossiries in surface/recess including cutting the wall and making good the same in case of recessed condit as required. 20mm

1.24. Supplying and fixing of following Modular switch/socket on the existing modular plate&switch box including connections butexcluding modular plate etc. as required. 1.24.1 5/6 A switch

1.24.3 15/16A switch

1.24.4 3 pin 5/6 A socket outlet

1.24.5 6pin 15/16A socket outlet

1.24.8 Bell push

1.26. Supplying and fixing following size modules.Gl box along with modular plate&switch box excluding modular plate as required.

1.27. Supplying and fixing following size /modules, GI box along with modular base & cover plate 1.27 for modular switches in recess etc. 1.27.4 6 Module(200mmx75mm)

1.27.5 8 Module(125mmx125mm)

1.28. Supplying and fixing following Modularbase&cover plate on existing modular metal boxes etc. as required 1.28.4 6 Module

1.28.5 8 Module

1.25. Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.26. Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.29. Supplying and fixing metal box of 150mm

X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

1.30 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

MCB.MCCB & DISTRIBUTION BOX 2.3 Supplying and fixing following way,Single pole and neutral sheet steel MCB distribution board,on surface /recess, complete with tinned copper bus ber,neutral busbar, earth bar,dinbar..earthing etc. as required (But without MCB/RCCB/Isolator) 2.3.2 8way.Double door

2.4 Supplying and fixing following way.horizontal type three pole and neutral sheet steel MCB distribution board,414 v on surface /recess, complete with tinned copper bus ber,neutral busbar.earth bar,dinbar..earthing etc. as required(But without MCB/RCCB/Isolator) 2.4.1 4way (4+12).double door

2.10. Supplying and fixing 5 A to 32 A rating. 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.10.1 Single pole

2.12. Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A

2.13. Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.13.2 63A

2.2.14. Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 2.2.14 125 A,36KA,FPMCCB

EARTHING 5.2. Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe 5.2 etc. with charcoal/ coke and salt as required.

5.6. Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke 5.6 and salt as required.

5.7. Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

5.8. Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2

UG CABLE 7.1. Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 7.1.2 Above 35 sq. mm and upto 95 sq. mm

Non Schedule Items(Analysis rate) Supplying menang mung and fixing of following A.C Ceiling fan Complete with all Jaccessories like down rod canopy etc. of following sweep with making necessary connection as approved by the dept. as required complete as directed by the deptt.(without regulator), 1400mm sweep,Make- Orient(PSPO) or eqivalent.

Supply testing and commissioning of Exhaust fan, Domestic,250 mm Sweep in the existing hole on the wall with making necessary connection as required complete. Make- Orientor equivaklent

Supplying installation testing and Commissioningof LED Tube Light in the wallwith making necessary connection as required complete make- Wipro or equivalent.

Supplying installation testing and Commissioningof LED Bulb in the wallwith making necessary connection as required complete make- Syska or equivalent.

AIR CONDITIONERS Supplying with installation testing and commissioning of Hi -- wall 3 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection up to 5 m between the room unit and out door unit as approved by the Deptt.) and as directed by the .department. Blue star Make, 1.5 Ton Capacity.Premium Model

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND/ Vee-Dee / V GUARD VERTEX INDO VENUS make) 4.0 KVA Automatic Input 90-280 V Out put

PANEL BOARD Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 0.80M X 0.90MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1:3:6 PCC foundation including brick soling/grouting etc. complete neatly Wiring done with provision for one no. 125 4pole MCCB or Switch Fuse Unit as incomer and provision for 4nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: 1.30mmx5mm 4 strip copper basber0.5M length each 2. LED type indicatorlamp R,Y,B -3nos. (Incoming &out going Switch gear of reqd. rating will be measured and paid separetely.)

ON LOAD CHANGE OVER SWITCH supply fitting fixing of 4 pole On load Change over Switch as specfied & as directed by the deptt 125 Amp