Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.5 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹29.5 L+₹1.5 L (5.40%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹67,000
Closing Date
15 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S N Gaikwad
Holta Cantt Palampur
SPL REPAIR TO BLDG NO P 66 F OR COOK HOUSE AND PROVN OF SEWAGE LINE WITH SEPTIC TANK AND SOAK WELL NEAR P 4 CSD AREA AT ALHILAL MIL STN
2023_MES_614129_1
GEP-42/2023-24
Open Tender
Civil Works
Item Rate
180 days
Alhilal Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
GE Palampur
₹67,000
28 Nov 2023
17 Aug 2023
18 Sept 2023
17 Aug 2023
15 Sept 2023
1 Sept 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed.
Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.m each, complete all as specified and directed.
Taking down shutter of any description exc 1 sq.m but n. exc 2 sq.m each. complete all as specified and directed.
Refixing shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each after repair in same opening, complete all as specified and directed
S&F factory made Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed.
S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed.
S&F rolled mild steel bands,straps,supports or stays for rainwater,ventilating pipes,including bolts,if required; hooks(stays),heavy,for large gates,hook and pintle hinges;large hasps and staples;chains;hand made sliding bolts;clamps;hold fasts;wall ties;hooks for hanging fans;plain angle cleats for securing purlines to wooder trusses conform to Fe-290 Gde E-165 complete all as specified & directed.
M&L plain cement concrete 1:2:4 type B-0 using 12.50 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.
S&F 35mm thick factory made 2nd class hard wood rail and style plain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.
M&L preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed.
S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 ,complete all as specified.
M&L preparing new surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.
S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc. 0.50 sq.m in each pane, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames,metal frames including punching or drilling out old glazing pins/spring clips , or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
Excavation post holes (or similar holes) in any type of soil each n exc 0.50 cu.m,getting out,returning,filling on and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25cm, complete all as specified and directed.
S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed.
S&F 100 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
M&L mild steel sliding door bolts, 300mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple etc. complete all as specified and directed.
S&F in repairs 300mm long MS ordinary door springs including roller and roller plate complete all as specified and directed.
S&F well seasoned 2nd class hard wood small fitting such as cleats, brackets of any type,latch and hinge blocks,shaped door and windew stops and the like including all necessary labours articles n.exc 200 Cu.cm each complete all as specified and as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L joint free coloured glazed ceramic tiles in vertical surfaces350x450x7mm,450 x 300x 7mm/ 600 x 300 x 7mm as in skirting/dado etc, over and including 10mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L Non-skid, joint free (edge cut) coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L Non-skid/matt finish/sugar finish of joint free (edge cut), coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L machine cut kota stone slab flooring 18 to 20mm thick laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror face) complete over and including 15 mm thick screed in CM (1:4) complete all as specified and directed.
M&L 25 mm thick PCC 1:2:4 type B-1 (using 20mm thick crushed stone aggregate) 25mm thick as in sub base of flooring, leveling course of flooring or levelling course of roof etc, complete all as specified and directed.
M&L 18-20mm thick granite (of any type) work (table rubbed and polished) for wall lining (veering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigmente to match with shade of granite complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving's not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.
M&L plain cement concrete,1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and directed.
M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.(inner girth only measured)
M&L PCC M-10 (Nominal mix) 50mm thick using 20mm gaded stone aggregate as in paving, plinth protection etc, surface finished even and smooth without using extra cement and dividing into panells not exc 1.20 mtr complete all as specified and directed.
M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in mass concrete complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
M&L RCC M-15 (Nominal mix) type B-1 (using 20mm thick crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete al as specified and directed.
Form work to rough finished surfaces of concrete for soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed.
M&L 15mm thick rendering over brick/stone masonry surface in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M&L 15mm thick rendering over brick/stone masonry surface in CM 1:4, finished even and smooth without using extra cement using WPC as per manufacturer's instruction complete all as specified and directed.
M&L rendering 10mm thick on concrete surfaces as in facia or ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.
M&L three coats of white wash on newly plastered ceiling surfaces including preparation of surfaces even and smooth complete all as specified and directed.
M&L one coat of white wash on old surfaces pof ceiling including preparation of old surfaces even and smooth complete all as specified and directed.
M&L two coats of oil bound distemper over a coat of chalk whiting with applying 2 to 3mm thick wall care putty of smooth surface using of roller on newly plastered wall surface complete all as specified and directed.
M&L two coats of oil bound distemper over a coat of chalk whiting with applying 2 to 3mm thick wall care putty of smooth surface using of roller on old plastered wall surface complete all as specified and directed.
M&L preparing new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat primer complete all as specified & directed by Engineer-in-ch
M&L for preparation of old plastered or unplastered surfaces of walls and applying two or more coats of cement base paint white or tinted, complete all as specified and directed.
M&L repairing the edges/corner of Chajja/roof projection and similar work by removing of plaster width/girth exceeding 15 cm & n exc 30cm and making good with 15mm thick rendering in cement plaster 1:3 to match with including chicken wiremesh netting on existing surface complete all as specified and directed.
Dismantling cast/PVC drain pipes of any dia, jointed in cement mortar fixed in trenches and taking out of trenches removing where directed complete all as specified and directed.
S&F 75mm bore of pipe PVC (SWR) pipe single socketed in any length with rubber ring joints, as in floor and trenches complete all as specified and directed.
S&F in repairs 110mm bore of pipe PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to wall, ceiling, floors etc. complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends complete all as specified and directed.
S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed .
S&F PVC (SWR) vent cowl 100/100 bore dia, complete all as specified and directed.
S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F vitreous china squatting pan water closet, orissa pattern, size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVC (SWR) 'S' trap,setting trap and pan in lime concrete and jointing to flush pipe and making good disturbed surfaces of floor and match with existing follor, complete all as specified and directed.
Vitreous china, wash hand basin, (white) of size 550mm x 400mm including brass CP waste coupling 32mm size with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends, complete all as specified and directed.
S&F in repairs 10 litres capacity PVC valve less symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle including brackets & 32 mm size PVC flush pipe, complete all as specified and directed.
S&F PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and directed.
S&F in repair fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
S&F in repair 15mm bore fancy type stop valves/angle cock (two way if required), cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.
S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.
S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for GI tubing complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down 25mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed.
S&F steel water tubing, 15mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed.
S&F steel water tubing, 20mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed.
S&F steel water tubing, 25mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed.
Cutting chase, pinning in making goof to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduiit wiring, etc and making good, cutting exc 10cm but not exc 20cm complete all as specified and directed.
M&L complete removal of roof treatment including APP membrane,PCC padding,plastering,brick bat etc and preparing the surface of roof slab by brushing with wire brushes for removal of loose material etc and sweeping with brooms, gunny bags and finally remove dust by compressed air by compressor complete all as specified and directed.
M&L applying neat cement slurry with 3Kg of cement slurry per sq.m mixed with liquid water proofing compound on surfaces of roof and platering 10 mm thick in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer's instructions and finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately..
M&L one coat of cold bituminous primer to the plastered surface @ 0.40 litres per sqm conforming IS-3384 and laid a layer of APP polymeric membrane 3mm thick (minimum) weighing 3.0 kg per sqm reinforced with polyster non woven fabric (weight not lass than 150gm/sqm) by toarch application method complete all as per manufacturer instructions and sealing all the over lap shall be minimum 75mm in length side and 100mm on with side. complete all as specified and as directed.
M&L 40mm thick plain cement concrete, M-15 (Nominal Mix), type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregates) as in roof kerbs, mud stops, roof padding over APP etc using water proofing compound, complete all as specified and directed. Note: WPC shall be measured and paid seperately.
Supply only liquid water proofing compound complete all as specified and directed.
M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in base of tiling finishing the surface even & smooth without using extra cement complete all as specified and directed.
M&L 50mm fine aggregate (sand) for cushioning of paver blocks complete all as specified and directed.
M&L 60 mm thick machine pressed precast concrete interlocking paver block with grey cement and pigment in any shape and size (shape as approved bt GE) laid in path, porch, hard standing or flooring etc conforming to IS-15658-2006, M-35 grade over and including 25 mm thick layer of sand cushioning, complete all as specified and directed .
Dismantling boarding, any description, fixed in any position with nails complete as specified and directed.
S&F not less than 18mm thick plywood grade BWR, type BB fixed with screwes for shelves, kitchen cupboards etc, to timber frame work or ply wood including 3mm thick teak wood lapping edge complete all as specified and directed.
Supply & paste 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. Make: Sunmica, Formica, Centry laminates or equivalent make as approved by GE.
M & L second class hard-wood plain fillets square/ rectangular, wrought face of sectional area not exc 3 Sqcm secured with nails or brads complete all as specified & directed.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
S&F 30 mm size (Width of flaps when open) continuous paino hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed by Engineer-in-charge.
S&F in repairs PVC coated mild steel conduit pipe 25mm dia (Drapery rod) with PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod complete all as specified & directed.
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or ther connecting plates etc Fe-410-W (Gde E-250) complete all as specified and directed.
Dismantling of old rested plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
M&L plain cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones(fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.
Excavation over areas not exc 1.5m deep and getting out in any type of soil complete all as specified and directed.
Excavation over areas exc 1.5m but n exc 3.00m deep and getting out in any type of soil complete all as specified and directed.
Excavation over areas exc 3.00m but n exc 4.50m deep and getting out in any type of soil complete all as specified and directed.
M&L broken stone or boulder hardcore of gauge n exc.63mm,deposited,spread and levelled in layers n exc,15 cm thick,watered and rammed to a true surface complete all as specified and directed.
M&L 200mm thick PCC 1:2:4 type B-2 using 40mm crushed stone aggregate as in flooring complete all as specified and directed.
M&L 50mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate and finished even and smooth using extra cement complete all as specified and directed.
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:4, complete all as specified and directed.
M&L 20mm thick rendering in CM 1:3 on internal surfaces of wall without using extra cement including mixing of water proofing compound (water proofing compound shall be measured separately) complete all as specified and directed.
S&F 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or fixed in walls complete all as specified and directed.
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc; vertical for batter complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.
M&L PCC 1:2:4 type B-1 (using 20mm thick crushed stone aggregate) set in CM 1:4 as in cover slab (for manholes etc) with similar acticles with plain faces complete all as specified and directed.
M&L brick work with sub class 'B' bricks in one brick thick honey comb walling , built in Cement mortar 1:4, complete all as specified and directed.
M&L broken brick loose aggregate for loose filling of gauge 40mm to 80mm graded in soakage pits, soakage wells complete all as specified and directed.
M&L brick work with sub class 'B' bricks, laid flat, in floors, old size brick in cement mortar 1:4, complete all as specified and directed.
M&L 300mm internal dia bore reinforced concrete pipes, class NP3, laid and jointed with collars complete all as specified and directed.
M&L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
M&L 75mm thick PCC 1:4:8 type D-2 (40mm graded crushed stone aggregate) as in sub base of floors/ paver block/ path etc finishing the surface even & rough without using extra cement complete all as specified and directed.
M&L 50mm sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
SCHEDULE 'A' PART-II Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.
M&L point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area , two single core, PVC insulated and unsheathed FRLS-H cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding concealed PVC rigid conduit not less than 20mm wide, ISI marked with accessories fixed wall/roof/floor etc with mild steel/pressed steel sunken box duly painted with two coats of anti corrosive paint/aluminium plaint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS-H cable as earth continuity conductor for one light point/fan point/bell point controlled by one switch & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed.
All as per the description of Serial item No. 122 above but one 5 pin socket outlet, 5/6 Amp on the same board complete all as specified and directed.
All as per the description of Serial item No. 122 above but one 5 pin socket outlet, 5/6 Amp on independent board complete all as specified and directed.
All as per the description of Serial Item No. 122 above but for 16 Amps socket point on independent board with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor as earth wire,complete all as specified and directed.
S&F switch piano 6 Amp flush type single pole one way with ISI marked,complete all as specified and directed.
S&F socket outlets 2-in-1, 3 pin 6 Amp flush type, complete all as specified and directed.
S&F socket outlets 16 Amps, 3 pin flush type, complete all as specified and directed.
S&F switch piano 16 Amp flush type single pole one way with ISI marked,complete all as specified and directed.
S&F ceiling rose, 3 phase / PVC / polycarbonate, isolated body complete all as specified and directed.
S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
Supply and fix steped type electronic fan regulator flush type on the existing phenolic laminated sheet suitable for 240 volts AC 100 watt etc. complete all as specified and directed.
Supply & fix LED bulb of 9 watt complete all as specified and directed.
S&F LED complete fitting including batten & T-8 Retro LED polytcarbonate 1 x 20 watt tuberod, appx 4 feet long, environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete all as specified and directed. Make: Bajaj Cat Part No. for batten BLRB-DB118 and Cat Part No. for tube rod BLRB20WLED/Havells Cat Part No. for batten STREAKNEOT8UPTO1x22wSSBSWH Cat part of tube rod TITANIAEO1213T8SSTL20WLED865SPC/Polycab Cat Part No. for Battern PID0502001/Cat Part Tube rod LTU0101009P
S&F environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head fitting LED luminaire comprising of high brightness LEDs 10 watt, IP66 protection class complete all as specified and directed. Havells Cat Part No. RUGBYGENXFTS10WLED865SSYMBOPC/Bajaj Cat Part No. BIBWP 10W LED WH/Philips Cat No. WT202WLED 10S
M&L sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS-H, cable of 2 run 6 Sq mm for phase and neutral and one run of 6 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS-H, cable drawn through non metallic rigid PVC conduit not less than 20mm dia ISI marked including all conduit and fixing accessories complete all as specified and directed. Note:- (i) Two runs of cable for phase/neutral, one run of cable for earth and one run PVC conduit will be measured and paid as one unit length complete all as specified and directed. (ii) Wiring shall be done in proper colour coding.
Taking down ceiling/exhaust fan, sealing cable end, dismantling blades and removing fan and bladese to store complete all as specified and directed.
Taking down ceiling fan, any size and sweep and exhaust fan of any size from its position after disconnecting electrical connection and transport it to workshop for servicing, dismantling for servicing including removal of bearing, bushes, condensor, connector, flexible cord, split pin etc if required removing old grease and refill fresh, lubricating bushes alongwith new washers, cleaning and washing fan blades, fan body etc with soap solution after repairing re-assemble the same and transporting from workshop to any location in Alhilal Mil Station and fixing to position/location as directed by Engineer-in-Charge, connecting to electric system, testing etc complete all as specified and directed. Note:- (i) Replacement of parts/rewinding shall be measured and paid separately. (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES Store & taking down unserviceable/defective parts. (iii) Item such as bearings, bushes, capacitor, shaft etc required for replacement shall be measured and paid separately as supply only.
M&L cutting and taking out old burnt winding of any sweep ceiling fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and directed.
M&L cutting and taking out old burnt winding of 450/300/250mm sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and directed.
S&F in replacement of capacitor 2.50 Mfd, 240V complete all as specified and directed.
Hanging only ceiling fan/exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
Taking down the sub main wiring of any size from wall/roof/ceiling and removing from the site and making good disturbed surface complete all as specified and directed.
Taking down main switches, distribution board, steel enclosure with MCB's any way and rating including wooden board or from steel board and making good disturbed surface complete all as specified and directed.
S&F Factory made DB SPN 8 way double door with 200 Amps rated bus bar concealed in wall IP 42/43 protection,240V for fixing MCB & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed. Note: Distribution board and MCB's should be same make.
S&F MCB SP ‘B’ curve, 10KA, 240V, 6 to 32 amps, in the MCB DB including necessary connection complete all as specified and directed.
S&F MCB SPN ‘C’ curve, 10KA, 240V, 32 amps, in the MCB DB including necessary connection complete all as specified and directed.
M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connecting to GI earth wire of size 4mm size by means of bolts, nuts, check nuts and protected by provision of GI medium grade pipe of 15mm bore including provision of 40mm tk cover of RCC (1:2:4) reinforced with XPM (wt no less than 4Kg/sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handle made to shape, GI light grade 20mm dia pipe for watering of suitable length placed on tp edge of earth plate, common salt and charcoal filling, with fixing arrangement, funnel, wire mesh and excavation and earthwork in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50m complete all as per plate No. 3 of SSR 2009 Part-I and connecting to earth test point all as specified and directed by Engineer-in-Charge and including testing on completion.
Note:-(i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B1, 80mm thick reinforcement with 8mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe up to 7.50m and the rate includes in the unit rate of item. (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includese in the unit rate of item. (iv) The earth chamber shall be constructed 5m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate for this item.
Supply, laying and testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 V grade with stranded aluminium conductor of size 25 sqmm x 4 core, laid in trenches or passing through pipe including taking down of existing cable/service connection of any type or size and removing from the site to MES store for reuse if serviceable or for credit all as specified and directed.
Sand cushioning to under ground cable with a layer of sand 8 cm before laying the cable and 15cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed.
Supply and laying best quality, locally available, sub class 'B' bricks (Old size) for cable protection cover, laid flat and dry in trenches over the cable, perpendicular to the direction of cable complete all as specified and directed.
S&F 40mm bore galvanised iron, light grade (ISI marked) laid in trenches/fixed on wall/poles etc for protection of cable, including taking out old tubing complete all as specified and directed.
Taking up or down old GI tubing 20mm bore and connections (including fittings) from trenches/walls/floors and connections including cleaning for re-fixing or remove to store yard/credit for contractor complete all as specified and directed.
Excavation in trenches,nexc 1.50m wide and n exc 1.50m in depth for foundation,etc or for shafts,wells,cesspits,manholes,pier holes,etc n exc 10 sq m on plan and getting out any type of soil complete all as specified and directed.
Returning, filling in (Soil) includnig spreading, levelling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.
Removing ewcavated material (soil) to a distance not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
Supplying, laying and testing 20mm bore galvanised steel water tubing medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etc complete all as specified and directed.
Supply and installation, commissioning and testing at roof top of building suitable height 'Solar water heating system (Flat Plate Collector) based on indirect type with electric backup heater of 3 KW (2 Nos) and controlled by suitable capacity of MCB and other safety devices such as thermostat, relays etc as per manufacturer's recommendations of capacity 500 ltr per day having make up tank capacity of 5 ltr (at Temp 60 degree centigrade to 80 degree centigrade including suitable flat plate collectors having insulation of rock wool/mineral wool 50mm thickness bottom and 25mm thickness on sides with toughened tempered glass of 4mm thick and clading with aluminium sheet 26 SWG hot water storage tank of capacity 500 ltrs and of 20 guage thickness stainless steel plate (having insulation of rock wool) mineral wool 100mm thick & cladding with aluminium sheet 24 SWG) including staging for collector with necessary PCC work with aluminium cladding angle iron structure, inter connection between cold water tank and solar panel and necessary masonry work foundation complete all as specified and directed.
S&F plug metal clad single pole & neutral with a 2 pin & earth plug and socket complete with MCB SP 20 amp, 230 volts complete all as specified and directed.
Supply and fixing hot water pipe duly insulated with glass wool and aluminium clading of size 20mm bore complete all as specified and directed.
S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
M&L PCC 1:3:6 nominal mix type C-2 (using 40mm crushed stone aggregate) as in foundations, fillings and mass concrete complete all as specified and directed.
S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe-410 W(Gde-E-250) quality-B, complete all as specified and directed.
M/S Bharmouri Construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .