REPAIRING and RENOVATION OF F-1 TYPE BLOCK (9 QUARTER) FOR SDAU AT S.K.NAGAR

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves, holdfasts

1 and other attachment etc. complete and stacking them 143.00 190.19 EACH

within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Demolition including stacking of serviceable materilas and

2 disposal of unserviceable materials with all lead and lift. (i) 9.00 1071.63 CMT

R.C.C. work

Dismentaling tiled of stone floors laid in mortar including

3 stacking of serviceable materilas and disposal of 484.00 48.63 SMT

unserviceable materials with all lead and lift.

Dismantling santtary fittings like wash basin. W.C. pan

4 Indian and European type, flushing tank etc. including 18.00 410.13 EACH

stacking the materials with all lead and lift.

Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from

site of work with all lead and lift

Removing dry or oil bound distemper by a washing and

6 scraping and sand papering the wall surface smooth 4354.00 11.42 SMT

including necessary repairs to scratches complete.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in in

superstructure above floor two level in Cement mortar 1:5

(1-Cement : 5-coarse sand) Conventional

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

8 plastering upto floor two level and finished even and 247.00 163.39 SMT

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

20mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of 12mm

9 thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 135.00 317.52 SMT

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)

etc. complete.

P/F 20 to 25 mm. Thick Polished Granite and kotah stone

sand witch type platform resting on single/ double

polished kotah stone of 25mm thick in C.M. 1:4 with

25mmGranite stone on top and facia Patti as per detail &

10 cupboard shelves and supports with polished kotah stone 21.00 5356.00 SMT

etc. comp. (in this item measurements should be taken of

top surface and in unit of sqmt basis) As per Architect

instructions and drawing or as directed by engineer in

charge.

SCHEDULE-B1

Description of Item Qty. Rate Per Amount

Providing & fixing sandwich type average 20 mm thick

machined polished GRANITE stone molded door frame of

inner trip 130mm X 18mm wide and outer trip 150mm X

18mm wide jointed with Super flex guranted fixing

solution by kerakoll mixed with pigment to match the

shades of the slabs, including rubbing and polishing

complete. The Stone used should be in one single long

piece as per drawing or as directed by Engineer-in-charge.

The exposed projected edges shall be of uniform thickness

and of uniform projection including molding , chamfering,

rounding, polishing complete

Providing fabricating, erecting and fixing of M.S.grill,M.S

Shutter fabricated from m.s. plat, angles, tees, spacebar,

round bar, pipes etc. complete including applying one coat

12 of red oxide & two coat synthetic enamel paint etc 6370.00 108.00 KG

complete. As per Architect instructions and drawing or as

directed by engineer in charge.

Providing & Fixing of 30mm thick prelaminated Flush door

shutter with G.I metal frame 14 gauge (2mm thick) having

minimum weight 3 kg/rmt section 100x50 mm including

13 brass alluminium hinges with anodized handles with 109.00 4200.00 SMT

locking arrangement, stopper etc complete including one

coat of primer and two coat of synthetic enemal paint to

frame as directed by EIC.

Providing and fixing aluminum partly paneled partly glazed

or fully glazed or fully paneled door of 110.50 x 38.50 mm

size section frame of 1.55 Kg. / Rmt. weight with 5 mm

side laminated plywood sheets or compact sheet with

shutter frame style size 44.5mm x 44.5 mm of 1.30 Kg. /

Rmt. weight with glazing Patti rubber packing including

brass pivot hinges, handles with locking arrangement etc.

comp. with anodized fixtures and fastenings

SCHEDULE-B1

Description of Item Qty. Rate Per Amount

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 127mm x

38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four

track member size 122.20mm x 31.75mm x 1.10mm@ wt

1.205 kg/m, vertical member of size 122.20mm x 31.75mm

x 1.50mm @1.398 kg/mt with sliding shutters of horizontal

15 member size 40mm x 18mm x 1.29mm@ 0.456kg/mt 76.00 2119.14 SMT

,vertical member of size 40mm x 18mm x 1.29mm @

kg/mt with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.Applying two coats of

16 putty & two coats of primer of approved brand and 2364.00 122.55 SMT

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand

papered smooth

Providing & applying three coats (first coat with water

base primer, second cote acrylic paint with brush and final

coat with brush and roller) of external 100% acrylic paint

"apex ultima" from Asian paint or equivalent approved

with brush on exterior surfaces at all heights & all places

including scaffolding to give even shades including

thoroughly brushing the surfaces free from mortar

dropping and other foreign matter and sand papered

smooth etc complete as per the manufacture's

specification & to the satisfaction of engineer in charge or

architect. (newly plastered surfaces shall require three

coats - first coat with 100% dilution & two coats with 40%

dilution or as specified by paint manufacturer).

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

18 adhesive material including dismentaling of existing 445.00 1331.27 SMT

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for light shade

SCHEDULE-B1

Description of Item Qty. Rate Per Amount

Providing and laying Vitrified tiles 8 to 10 mm thick , in

skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry

Providing and laying stain-free, chemical-resistant, three-

component epoxy grout (consisting of resin, hardener, and

colored filler powder) for floor tile/stone joints. The scope

of work includes thorough mechanical cleaning of joints to

remove loose dust, laitance, and remnants of tile adhesive,

mixing the components in the exact manufacturer-

prescribed ratios, and firmly packing the grout into joints

using a hard rubber float. The work also includes removing

excess grout, initial cleanup with a damp sponge within the

open time window, and a final wash using a specialized

grout cleaner to ensure a clean, haze-free finish on the

tile/stone surface. The contractor must ensure proper

masking of adjoining surfaces where necessary and protect

the grouted area from traffic during the initial curing

period of 24 hours. Rate shall include cost of all materials,

labor, specialized tools, safety equipment, curing, and

overheads.

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

21 coarse sand) laid over and jointed with grey cement slurry 107.00 1008.79 SMT

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying Ceramic tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

Providing and fixing water closet squatting Pan (Indian

type W.C. Pan) size 580mm (Earthwork, bed concrete, foot

23A reste and trap to be measured and paid for separately) (A) 9.00 982.33 EACH

Vitreous China.(I) Long pattern = White colour

Providing and fixing 100mm size P or S trap for water

closet squatting pan including jointing the trap with the

23B 9.00 339.02 EACH

pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine

sand)(A) Vitreous China.

Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-

coarse sand)a, pair of white vitreous China 250mm x

23C 9.00 118.95 EACH

130mm x 30mm footrest to long pattern squatting pan

water closet.

SCHEDULE-B1

Description of Item Qty. Rate Per Amount

Providing and fixing washbasin with single hole for pillar

tap with C.I. or M.S. brackets painted white including

24A sutting holes and making good the same but excluding 9.00 1511.53 EACH

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm

x v 400mm size. (i) In white colour.

Providing and fixing C.P. brass waste for washbasin or sink.

24B 9.00 67.24 EACH

(A) 32mmdia.

Providing and fixing M.I. fisher union for washbasin or sink.

24C 9.00 77.97 EACH

(A) 32mm dia.

Providing and fixing C.P. brass towel rail comlete with C.P.

25 brass brackets fixed to wooden plugs with C.P. brass 9.00 610.32 EACH

scews.(B) 600mm x 20mm size.

Providing and fixing C.P. brass shower rose with 15mm or

20mm inlet.(A) 100mm dia. Each

Providing and fixing screw down bib taps of following

27 size.(B) Brass chromium plated screws down Bib Tap. (i) 36.00 184.98 EACH

Providing and fixing chromium plated brass half trun flush

28 cock of approved quality including fixing in pipe line etc. 18.00 252.26 EACH

complete.(i) 20mm dia.

Providing and fixing C.P. Angle stop cock 15 mm Heavy

duty with cap

Providing and fixing C.P. Pillar cock 15 mm Heavy duty

30 swan neck, capstan head, screw down high pressure with 18.00 641.53 EACH

screws, shanks and back nuts.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain

- 75 mm diameter with jali of the following nominal

31 diameter of self cleansing design with C.I scread down or 27.00 711.11 EACH

hinged grating including the cost of cutting and making

good the walls

Providing & Fixing S.S KITCHEN SINK 535mm X 460mm X

215mm size (Make - NIRALI,CARYSIL,CERA) including C.P

32 waste coupling, waste pipe cutting holes in wall/Platform 9.00 6700.00 EACH

and making good the same as per instruction.

Providing laying and jointing in true line and level 15mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

SCHEDULE-B1

Description of Item Qty. Rate Per Amount

Providing laying and jointing in true line and level 25mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure polythene pipes of the following

outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making

good the wall ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the following

outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making

good the wall ceiling and floor.(G)110 mm

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

38 300mm x 300mm size (inside) with standard weight.(i) 6.00 1234.57 EACH

Square mouth traps.(B) 150mm x 100mm size P or R type

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg) and Wt. of frame 15Kg) (R.C.C. top

39 slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded 5.00 2903.89 EACH

stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

Providing and fixing ball cock of approved. quality as

directed.(A) Copper Metal (i) 25mm dia

SCHEDULE-B1

Description of Item Qty. Rate Per Amount

Providing and fixing ball cock of approved. quality as

directed.(A) Copper Metal (i) 50mm dia

Providing erecting and fixing double coated ISI water tank

42 of required capacity each with all necessary fittings and 6000.00 3.91 LTR

connection etc. complete on terrace

Providing and fixing 600mm x 450mm bevelled edge

mirrror of superior glass mounted on 6mm thick A.C. sheet

or plywood sheet and fixing to wooden pluge with C.P.

brass screws and washers.

Providing and laying cement concrete flooring 1:2:4 (1

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto

surface using white cement including rounding off

junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

Applying general insecticide pest control treatment to

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part-II(

46 (0.075% concentration by mass) is recommended 10.5ml 300.00 80.04 SMT

chemical diluted with 5 liters of water application 0.5 litre

chemical /Sqm of surface is recommended as per I.S.

A) Total Rs.

Dismantling credit for Door, Window

B) Total Rs.

A-B) Total Rs.

Total Rs.