Special Repairs to Old JAS CK House No. T-4A at the PRC and Special repairs to Toilet Block of Bldg No. P-199 OTM at SRC Ramgarh Cantt under GE RAMGARH

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish of the premises complete all as specified and directed. (355+110)

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular )area of each tile exe.0.11 sqm but n.exe.0.18 sqm, in floor including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L for glazed ceramic coloured tiles 300x250X 7/450x300x7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including rendering 10mm thick with cement mortar (1:3) on fair faces of brick work to received tiles in vertical, complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking of shutter from the frame) of any description n.exc 1.5 Sqm each, complete all as specified and directed by Engr-In-Charge .

Taking down chowkhats or frames with shutter (without taking of shutter from the frame) of any description exc 1.5 Sqm and n.exc 4 Sqm each, complete all as specified and directed by Engr-In-Charge .

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed by Engr-in-Charge.

M & L for solid PVC door frame of size 50mm x 47 mm made out of 5m plain colour PVC sheet reinforced with MS square tube, fixing in opening, complete all as specified and as directed.

M & L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rain on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement fixing with the frame at site as per manufacturerer's instructions, complete all as specified and directed.

S & F pressed steel frames 125x60 mm for doors or for windows with one or more rebates including, necessary fixing lugs hinges lock strike plate etc., complete all as specified and as directed.

S & F of 35 mm thick plain framed, panelled shutter with lock rail and panel of 12 mm thick plywood commercial on both faces. The size of rail and syle as per IS:1003 (Part-I), complete all as specified and directed.

S & F of 35 mm thick 2nd class hard wood glazed and skeleton shutters of 8 panels, divided into squares with plain, chamfered or rounded, mitred and rebated sash bars and prepared to receive glass, gauze etc., edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc., fitted to chowkhats for doors etc., complete, size of member of shutter as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed. (4+6)

S & F steel windows with side hung shutters including projecting type hinges with steel handle and one peg stay on each leaf, complete with glazing bars, dovetailed or welded, complete all as specified and as directed. (8+7)

All as per item No. 12 here-in-before but without glazing bars, complete. (8+7)

S&F steel window or ventilator with fixed type with glazing bars,complete all as specified and directed.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-410 or Fe-310-0, complete all as specified and directed. (60+50)

M&L for hold fast, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar articles conforming to Fe-290-1 Gde E-165, complete all as specified and directed (10+2)

M & L for cement concrete type C1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks, fillings for holdfast etc., complete all as specified and as directed. (1+0.45)

S & F butt hinges 100mm with galvanised mild steel hinges pin and fixed, complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolts 200 mm long of extruded section, complete all as specified and as directed. (22+12)

S & F Aluminium anodised handles of extruded section 125 mm long of cast type, complete all as specified and as directed. (22+14)

S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed. (2+3)

S & F Galvanised mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed. (8.8+9)

S & F in for 3.0 mm thick sheet glass, ordinary quality, and glazing with oil putty in squares n exc 0.5 sqm in each pane, complete all as specified and directed. (6.40+4)

S & F in for 3.0 mm thick frosted glass, and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F small fittings of second class hard wood such as brackets of any tpe, latch and hinge block shape door, window stops and the like including all necessary labours articles n.exc 200 Cu. cm each, complete all as specified and as directed. (2+6)

Taking down cement plaster of any description and in any position including raking out joints, hacking for key scrubbing down with water etc and removing of debris from site, complete all as directed. (20+173)

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc., complete all as specified and directed. (1+9)

M & L for brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 50 Kg/Sqcm) old size bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:4), complete all as specified and as directed.

M & L for rendering 15mm thick in CM (1:4) finishing surface even and smooth without using extra cement, on brick work or concrete surfaces, complete all as specified and as directed. (8+161)

M & L for rendering 15mm thick in CM (1:6) finishing surface even and smooth without using extra cement, on brick work or concrete surfaces, complete all as specified and as directed. (20+68)

M & L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. (20+229)

M & L for plain cement concrete 1:5:10 type E-2, using 40 mm graded stone aggregate as in sub-base, filling of sunken floor, etc., complete all as specified and directed.

M & L for cement concrete type B1, 1:2:4 (using 12.5 mm graded aggregate) in levelling courses, coping, window cill etc., complete all as specified and directed. (1+3)

Demolition of cement concrete reinforced as in chullah hoods, shelves, cover slab, and platform etc., complete all as specified and as directed. (0.5+0.50)

M & L for RCC as in kitchen platform, shelves, cover slab, (1:2:4) type B-0 using 12.5mm graded stone aggregate including formwork, complete all as specified and as directed.

S & F mild steel TMT bars 8 to 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping, for columns hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and directed. (37+35)

S & F in repair 1000 ltr capacity rotational moulded polythene water storage tanks in two layer cylinder vertical with closed top) hoisted and fixed in position, complete all as specified and as directed. (1+1)

S & F PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (minimum weight 210 gms), complete all as directed. (1+1)

Taking up and down steel tubing and connections including cleaning for refixing bore of pipe 15mm dia pipe, complete all as specified and as directed. (60+10)

Taking up and down steel tubing and connections including cleaning for refixing bore of pipe 20mm dia pipe, complete all as specified and as directed. (40+30)

Taking up and down steel tubing and connections including cleaning for refixing bore of pipe 25mm dia pipe, complete all as specified and as directed.

S & F for GI tubing medium grade including all types of fittings of ISI marked laid in trenches/walls/floor suitable for 15 mm bore, complete all as specified and as directed. (55+8)

S & F for GI tubing medium grade including all types of fittings of ISI marked laid in trenches/walls/floor suitable for 20 mm bore, complete all as specified and as directed. (35+25)

S & F for GI tubing medium grade including all types of fittings of ISI marked laid in trenches/walls/floor suitable for 25 mm bore, complete all as specified and as directed.

Refixing of GI tubing and connection including new GI fittings complete on walls suitable for 15 mm dia pipe, complete all as specified and as directed. (5+2)

Refixing of GI tubing and connection including new GI fittings complete on walls suitable for 20 mm dia pipe, complete all as specified and as directed. (5+5)

Refixing of GI tubing and connection including new GI fittings complete on walls suitable for 25 mm dia pipe, complete all as specified and as directed.

S & F in repair for gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc., complete all as specified and as directed. (2+2)

S & F in repair for gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc., complete all as specified and as directed.

S & F 15mm dia bore bib tap, chromium plated, fancy type, long shank with crutch or butterfly handle, screw down screwed for iron pipe or for brass ferrule etc., complete all as specified and directed. (36+2)

S & F in repairs stop valve chromium plated, screwed down with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc., complete all as specified and directed and as directed.

S & F in repairs 15 mm bore fancy type pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs 15mm dia concealed type stop valve fancy type chromium plated etc., complete all as specified and as directed.

S & F brass chromium plated shower rose 125 mm size with or without swivel joint fixed to iron pipe etc., complete all as specified and as directed.

S & F in repair vitreous china squatting pan, 'Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage connection pipe etc., complete making good disturb surface with existing finish of floor, complete all as specified and directed.

S & F in repair Vitreous china urinals, bowl type (back or corner wall type) of size 465x355x265 mm, complete including providing and fixing plugs, waste coupling, waste pipe, bedding urinal against wall in cement morta (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe, complete all as specified and as directed.

S & F in repair 450 mm long PVC connection 15 mm size with two PTMT nuts, complete all as specified and as directed

S & F in repair CP towel rail, 20mm dia, D type, 60 cm long, complete all as specified and as directed. (20+2)

S & F in repair flushing cistern low level, PVC 10 lit capacity syphon action type, valveless with inlet ball valve, float valve and handle including brackets fixed to wall and 32mm dia PVC flush pipe, including connections and making good the disturbed surfaces, complete all as specified and as directed.

M & L for granite slab 20mm thick machine cut over and including 15mm thick screed bed in cement mortar (1:4), bedded and jointed with grey cement slurry and pointed with white cement with white cement of pigment to match the shade of granite stone including cutting and polishing etc., complete all as specified and as directed. (3+17)

S & F Vitreous China wash hand basin (Star white) oval type 560x410 mm including 32 mm CP brass waste fitting, 32 mm PVC waste pipe, fixed on RCC slab and making good disturbed surfaces in cement mortar (1:3), complete all as specified and as directed.

S & F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Min wt 300 gms), complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting n.exc 10 cm girth, complete all as specified and as directed.

Dismantling cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and as directed.

S & F 100 mm bore sand cast iron soil pipe, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and as directed.

All as per item No. 66 here-in-before but fixed to walls.

S & F 75 mm bore sand cast iron soil pipe, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and as directed.

All as per item No. 68 here-in-before but fixed to walls.

S & F Cast iron 100 mm bore bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and as directed.

S & F Cast iron 75 mm bore bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and as directed.

S & F in repair Cast Iron 100 mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and as directed.

S & F in repair 75 mm dia Cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed.

S & F in repair Cast iron 100 mm dia vent cowl, complete all as specified and as directed.

M & L for brushing neat cement slurry (3 Kg of cement per Sqm) mixed with chemical compound in the proportion chemical compound, water and cement (1:4:7) or as per manufacturer's instructions for bonding of old concrete surface to new concrete, complete all as specified and as directed.

M & L for PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) mixed with integral water proofing chemical compound, mixed in proportion 200 milli litre per 50 Kg cement as in padding, benching, sunken portion etc., on roof surface for correcting/making proper slope on roof, etc.,complete all as specified and directed.

M & L for rendering 10mm thick in CM (1:3) on concrete/brick surfaces with liquid water proofing compound @ 200 ml/50 Kg of cement or as per manufacturer's instructions finished even and smooth without using extra cement over roof/sunken slab/wall , complete all as specified and as directed. NOTE: Water proofing liquid will be measured and paid separately.

Supply only Liquid water proofing compound, ISI marked, complete all as specified and as directed.

M & L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm, including cleaning of surface, complete all as specified and as directed.

S & F 50 mm bore tubes light grade galvanised with all fittings laid in floor as in spout pipe, etc., complete all as specified and as directed.

S & F in repair grating doom type, 100 mm dia, PTMT, (Minimum weight 25 gms), complete all as specified and as directed.

M & L applying two coat of white washing including preparing of old plastered wall surfaces, complete all as specified and as directed.

M & L for one coat of whitewash on old prepared concrete surfaces on ceiling etc., complete all as specified and as directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering, complete all as specified and directed.

Dismantling of roof trusses, purlin, rails fastening, etc., of steel section, complete all as specified and as directed.

M & L for roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., and welding counter sunk for holes and necessary gusset plates etc and similar work conforming to Fe-410W (Gde E-250 quality A) complete all as specified and directed by Engr-in-Charge.

M & L for MS flat (wind tie) as roof sheet securing including distance pieces, cleats, etc, complete all as specified and as directed.

S & F post and struts including cutting tops to shape as directed, including all necessary drilling, bolting or rivetting etc., and similar work conforming to Fe-290, Gde 165, complete all as specified and as directed.

S & F 6mm cement corrugated sheet fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified and as directed.

All as per item No.89, here-in-before but except sheeting, complete all as specified and as directed.

S & F two piece adjustable serrated cement sheet ridge 6mm thick for corrugated or semi corrugated sheet, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid bedded and pointed in any mortar, complete all as specified and directed

M & L glazed ceramic coloured tiles of size 375 X 250 X 7mm / 450x300x7 mm thick as in dado/skirting etc., set and jointed in neat cement slurry and pointed in colour cement to match the tiles including 10 mm thick cement plaster in CM (1:3), complete all as specified and directed.

M & L for machine cut kota stone slab flooring 18-20mm thick over cement screed bed 20mm thick in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L 16-18 mm thick white marble stone flooring as in border etc., at Kota stone flooring over 20 mm screed bed in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 50 Kg/Sqcm) old size bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and as directed.

All as per item No. 96 here-in-before but except bricks.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for PCC (1:4:8) type D2 40mm graded stone aggregate as in foundation, sub base, filling and mass concrete etc., complete all as specified.

M & L for 75mm thick Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection finished even and fair without using extra cement including 10 mm wide groove and 75 mm deep joints at interval of n. exc. 3.00 mtr in length, at each corner and groove shall be filled with bitumen 85/25 and sand in the ratio (1:3), complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking of shutter from the frame) of any descipriton n.exc 1.5 sqm each complete all as specified and directed by Engr-In-Charge .

Taking down chowkhat or frame with shutter (without taking of shutter from the frame) of any descipriton exc 1.5 sqm but n.exc 4 Sq m each, complete all as specified and directed by Engr-In-Charge .

S & F pressed steel frames of size 125X60x1.25 mm for doors or windows with one or more rebates or single/double shutter including necessary fixing lugs, hinges iron strike plate, etc., including PCC (1:2:4) type B0, using 12.5 mm graded stone aggregate filling in hollow portion of frame, complete all as specified and directed.

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side either decorative face veneer both face with lipping/frame, complete all as per specified and directed.

S & F MS ordinary rat tail rod pattern springs 200 mm including roller and roller plate on wooden /steel chowkhat incl welding, riveting etc complete all as specified and directed by Engineer -In-Charge.

S & F for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc. 13 sqcm but not exc. 25 Sq cm complete all as specified and directed.

M & L for 12 mm thick pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice lamination and fixed with screws to timber framework complete all as specified and directed.

S & F of 30 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed.

S & F 40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel, bright fixed, complete all as specified and as directed.

M & L for RCC as in kitchen platform, shelves, cover slab, (1:2:4) type B-1 using 20 mm graded stone aggregate including formwork, complete all as specified and as directed.

S & F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.

M & L painting on new wooden based surfaces of any description not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-In-Charge .

M & L preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L for 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed.

M & L PVC (SWR) pipes 110 mm bore, single socketed in any length with rubber ring joints laid in trenches, complete all as specified and directed.

M & L PVC (SWR) pipes 75 mm bore, single socketed in any length with rubber ring joints laid in trenches, complete all as specified and directed.

S & F (SWR) 110 mm dia bends any radius with rubber ring joints, complete all as specified and directed.

S & F (SWR) 75 mm dia bends any radius with rubber ring joints, complete all as specified and directed.

Taking down carefully any type of point wiring (light, fan, socket bell or power) complete with all fitting such as batten, switch, ceiling rose, pendant, regulator, socket and brackets switch fuse etc removing materials from site and making good disturbed surfaces of walls, floors etc to match the existing surface all as directed . (30+28)

M & L for point wiring for one light/ fan point/call bell controlled by one switch with 1100 volt grade PVC insulated FRLS 1.5 Sq mm multi stranded copper conductor cable with continuous earth wire of 1.5 Sq mm solid stranded copper conductor cable PVC insulated-unsheathed, drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia & sunken anodized pressed sunken boxes made out of not less than 1.0 mm thick sheet, covered with 2.8 mm thick laminated insulated cover make sheet for housing/fixing switches etc complete all as specified and directed. (26+16)

All as per item No 120 above but 1.5 Sq mm for 5 Amp socket outlet on same board with 1.5 Sq mm earth wire complete. (2+6)

All as per item No 120 above but 2.5 Sq mm for 15 Amp switch socket combination on independent board with 2.5 Sq mm earth wire complete. (2+6)

M & L Sub main wiring two single core 4.0 Sqmm PVC insulated FRLS solid standerd copper conductor cable and one run of 4.0 Sqmm PVC insulated unsheathed FRLS multistanderd copper conductor cable for earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia including taking down of existing conduit or batten complete and making good disturbed surface wall complete all as specified and as directed. Note : - Not : 2 runs of 4 Sqmm cable and 1 run of earth wire 4 sqmm shall be measured as one unit length.

S & F in repair ceiling rose 3 terminal PVC/ Polycarbonate, isolated body, complete all as specified and as directed. (10+8)

S & F switch piano type 5 Amp 230 volt one way flush type complete all as specified and as directed. (28+16)

S & F socket outlet 3/5 pin 5 Amp flush type 230 volt, flush type universal, complete all as specified. (2+6)

S & F switch socket combination 2 in 1, 6 pin 5 Amp and 15 Amp flush type universal 230 volts, complete all as specified and as directed. (2+6)

S & F angle holder complete all as specified and as directed. (16+6)

S & F in repair sheet metal enclosures for DBs single pole & neutral 4 way double door with 200 Amp rated bus bar suitable to accommodate MCB and necessary electric cable connection through suitable lugs by crimping and making good disturbed area of wall complete all as specified & as directed.

S & F MCB DP, 40A 240V, ‘B’ Series, 10 KA, 50 Hz, including necessary incoming and outgoing connection with suitable size of copper lugs etc., complete all as specified and as directed.

S & F MCB SP, 6 to 32A, 240V, ‘B’ Series, 10 KA complete all as specified and as directed. (4+6)

S & F LED tube light 18 Watts along with fixtures complete, complete all as specified and as directed. (10+8)

S & F LED Lamps 9 Watts, complete all as specified and as directed. (16+6)

M&L,for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and PCC of chamber and coping shall in 1:3:6 type C-1 using 20 mm graded stone aggregate including excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate No 3 of SSR Pt-I, 2009 with CI cover 10mm thick of size 300x300mm with charcoal dust and common salt complete and earth lead connected to panel including testing complete all as specified. (1+1)

S & F sheet metal enclosures for DBs single pole & neutral 8 way double door with 200 Amp rated bus bar suitable to accommodate MCB and necessary electric cable connection through suitable lugs by crimping and making good disturbed area of wall complete all as specified & as directed.

S & F MCB SPN, 20 A 240V, ‘B’ Series, 10 kA complete all as specified and as directed.

M & L for wiring of circuitsub-main wiring along with earth wire with the following size of FR PVC insulated copper conductor 2 x 6.0 Sq mm x 1 x 4 Sq mm earth wire single core cable in surface/recessed in suitable size of PVC conduit including testing all as specified.

S & F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular stranded conductor 6 Sqmm including testing, complete all as specified and as directed.

M/S Bhushan Kumar Jain

M/S Parmar Construction

M/S SHAMBHU SHARAN SINGH