21MAY202002

Amount

Air Walker: -Providing & Fixing of Air-Walker -Dimensions: 100 x 550 x 1480 mm, GI pipes. -Fabricated with main post of min. 114 mm dia, 3.00 mm thick -Other pipes of 60 mm dia, 3.00mm thick. -All pipes should be powder coated 80-120 micron thick Akzo Nobel or equivalent paint. -All welding joints of pipe should be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. -Zinc primer paint to be applied at all welding points prior to finishing. -Base plate cover shall be made up of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness, UV resistant and color as approved by Engineer-in Charge. -High quality grip rubber should be used on handles. -Foothold shall be made of Nylon alloy with rounded edge to prevent impact and injury. -Maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by Engineer in charge. -Equipment to be fitted with inbuilt limiters to avoid unwanted movements. -The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts of 18 mm thickness. -When concrete is set, fixing of the equipment on to it and nuts & bolts be covered with base plate cover.

Sit up Station: -Providing and Fixing of Double Sit-up Station of appx. size 1500 x 1150 x 650 mm GI pipes. -Fabricated with main post of min. 114mm dia and 3.00 mm thick -Other pipes of 60mm dia 3.00mm thick. -Leg support of min. 65mm dia. -All pipes should be powder coated using Akzo Nobel or equivalent of 80-120 micron thick. -All welding joints of pipe should be robotic welded with joints scalloped and dressed off by removing sharp edges and burrs. -Zinc primer paint to be applied at all welding points prior to finishing. -Seat and Base plate cover shall be made up of preferably MS or virgin LLDPE plastic by rotational molding with minimum thickness of plastic 4.00mm, colourful, UV resistant and environmental friendly. -The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set, the equipment be fixed on to it and nuts & bolts be covered with the base plate cover.

Air Swing: -Providing and Fixing of Air winging pair of appx. size 1150 x 900 x 1250 mm made of GI pipes only. -Fabricated with main post of min. 110 mm dia and 3.00 mm thick. -All other pipes of 40 mm dia 3.00mm thickness. -Equipment should be powder coated using Akzo Nobel or equivalent of 80-120 micron thick. -All welding joints of pipe should be robotic welded with joints scalloped as necessary and dressed off after removing sharp edges and burrs. -Zinc primer paint be applied at all welding points prior to finishing. -Seat and Base plate cover shall be made up of virgin LLDPE manufactured by rotational molding with minimum thickness of plastic 4.00 mm, colorful and UV resistant environmental friendly. -Bearing used shall be maintained free, duly oiled sealed and self lubricated made by reputed company and is to be approved by Engineer-in-Charge. -Equipment to be fitted within built-in limiters to prevent unwanted movements. -All open ends of pipe to be colored by GI/LLDPE caps for user safety. -The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, the equipment is to be fixed on it and nuts & bolts be covered with base plate cover.

Horse Rider Station: -Providing and Fixing of Horse Rider Station of size 1000 x 600 x 1100 mm made of GI pipes. -Fabricated with main post of min. 110mm dia and 3.00 mm thickness. -Other pipes of 40mm dia & 3.00mm thickness. -All pipes should be powder coated using Akzo Nobel or equivalent of 80-120 micron thick. -All welding joints of pipe should be robotic welded with joints scalloped and dressed off by removing sharp edges and burrs. -Zinc primer paint to be applied at all welding points prior to finishing. -Pedals shall be made up Nylon alloy with rounded edge to prevent any impact of injury and seat to be made with virgin LLDPE plastic manufactured by rotational molding with minimum thickness of plastic 4.00mm, colorful and UV resistant environmental friendly. -Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company and is to be approved by Engineer-in-Charge. -Equipment to be fitted within built-in limiters to prevent unwanted movements. -All open ends of pipe to be colored by GI/LLDPE caps for user safety. -The equipment is to be fixed on ground with concrete of minimum strength of M25 and J shaped welded bolts and once the concrete is set, the equipment be fixed on to it and nuts, bolts be covered with the base plate cover.

Stair Stepper: -Providing and Fixing of Stair Stepper in a combination of pair and a single step of size 1000 x 800 x 1400 mm, made of GI pipes. -Fabricated with main post of min. 110 mm dia and 3 mm thick. -All other pipes of 40 mm dia 3.00mm thickness. - All pipes should be powder coated using Akzo Nobel or equivalent of 80-120 micron thick. -All welding joints of pipe should be robotic welded with joints scalloped and dressed off by removing sharp edges and burrs. -Zinc primer paint to be applied at all welding points prior to finishing. -Pedals shall be made up Nylon alloy with rounded edge to prevent any impact of injury and seat to be made with virgin LLDPE plastic manufactured by rotational molding with minimum thickness of plastic 4.00mm, colorful and UV resistant environmental friendly. -Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company and is to be approved by Engineer-in-Charge. -Equipment to be fitted within built-in limiters to prevent unwanted movements. -All open ends of pipe to be colored by GI/LLDPE caps for user safety. -The equipment is to be fixed on ground with concrete of minimum strength of M25 and J shaped welded bolts and once the concrete is set, the equipment be fixed on to it and nuts, bolts be covered with the base plate cover.

Leg Press: -Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm -Fabricated with main post of 110mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick -All pipes should be powder coated using Akzo Nobel or equivalent of 80-120 micron thick. -All welding joints of pipe should be robotic welded with joints scalloped and dressed off by removing sharp edges and burrs. -Zinc primer paint to be applied at all welding points prior to finishing. -Pedals shall be made up Nylon alloy with rounded edge to prevent any impact of injury and seat to be made with virgin LLDPE plastic manufactured by rotational molding with minimum thickness of plastic 4.00mm, colorful and UV resistant environmental friendly. -Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company and is to be approved by Engineer-in-Charge. -Equipment to be fitted within built-in limiters to prevent unwanted movements. -All open ends of pipe to be colored by GI/LLDPE caps for user safety. -The equipment is to be fixed on ground with concrete of minimum strength of M25 and J shaped welded bolts and once the concrete is set, the equipment be fixed on to it and nuts, bolts be covered with the base plate cover.

Pull Chair: -Providing and Fixing of Pull pair of size 2500 X 800 X 2000 mm -Fabricated with main post of 110mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick All pipes should be powder coated using Akzo Nobel or equivalent of 80-120 micron thick. -All welding joints of pipe should be robotic welded with joints scalloped and dressed off by removing sharp edges and burrs. -Zinc primer paint to be applied at all welding points prior to finishing. -Pedals shall be made up Nylon alloy with rounded edge to prevent any impact of injury and seat to be made with virgin LLDPE plastic manufactured by rotational molding with minimum thickness of plastic 4.00mm, colorful and UV resistant environmental friendly. -Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company and is to be approved by Engineer-in-Charge. -Equipment to be fitted within built-in limiters to prevent unwanted movements. -All open ends of pipe to be colored by GI/LLDPE caps for user safety. -The equipment is to be fixed on ground with concrete of minimum strength of M25 and J shaped welded bolts and once the concrete is set, the equipment be fixed on to it and nuts, bolts be covered with the base plate cover.

Rowing Machine :- -Providing and Fixing Rowing Machine of size 1280 X 800 X 1500 mm fabricated with main post of min. 110mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick -All pipes should be powder coated using Akzo Nobel or equivalent of 80-120 micron thick. -All welding joints of pipe should be robotic welded with joints scalloped and dressed off by removing sharp edges and burrs. -Zinc primer paint to be applied at all welding points prior to finishing. -Pedals shall be made up Nylon alloy with rounded edge to prevent any impact of injury and seat to be made with virgin LLDPE plastic manufactured by rotational molding with minimum thickness of plastic 4.00mm, colorful and UV resistant environmental friendly. -Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company and is to be approved by Engineer-in-Charge. -Equipment to be fitted within built-in limiters to prevent unwanted movements. -All open ends of pipe to be colored by GI/LLDPE caps for user safety. -The equipment is to be fixed on ground with concrete of minimum strength of M25 and J shaped welded bolts and once the concrete is set, the equipment be fixed on to it and nuts, bolts be covered with the base plate cover..

Seated Chest Press :- -Providing and Fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of min. 110mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick -All pipes should be powder coated using Akzo Nobel or equivalent of 80-120 micron thick. -All welding joints of pipe should be robotic welded with joints scalloped and dressed off by removing sharp edges and burrs. -Zinc primer paint to be applied at all welding points prior to finishing. -Pedals shall be made up Nylon alloy with rounded edge to prevent any impact of injury and seat to be made with virgin LLDPE plastic manufactured by rotational molding with minimum thickness of plastic 4.00mm, colorful and UV resistant environmental friendly. -Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company and is to be approved by Engineer-in-Charge. -Equipment to be fitted within built-in limiters to prevent unwanted movements. -All open ends of pipe to be colored by GI/LLDPE caps for user safety. -The equipment is to be fixed on ground with concrete of minimum strength of M25 and J shaped welded bolts and once the concrete is set, the equipment be fixed on to it and nuts, bolts be covered with the base plate cover.

Arm Wheel :- -Providing and Fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of min. 110mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick All pipes should be powder coated using Akzo Nobel or equivalent of 80-120 micron thick. -All welding joints of pipe should be robotic welded with joints scalloped and dressed off by removing sharp edges and burrs. -Zinc primer paint to be applied at all welding points prior to finishing. -Pedals shall be made up Nylon alloy with rounded edge to prevent any impact of injury and seat to be made with virgin LLDPE plastic manufactured by rotational molding with minimum thickness of plastic 4.00mm, colorful and UV resistant environmental friendly. -Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company and is to be approved by Engineer-in-Charge. -Equipment to be fitted within built-in limiters to prevent unwanted movements. -All open ends of pipe to be colored by GI/LLDPE caps for user safety. -The equipment is to be fixed on ground with concrete of minimum strength of M25 and J shaped welded bolts and once the concrete is set, the equipment be fixed on to it and nuts, bolts be covered with the base plate cover.

Elliptical Exerciser :- -Providing and Fixing Elliptical Exerciser of size 1200 X 540 X 1600 mm fabricated with main post of min. 110mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick -All pipes should be powder coated using Akzo Nobel or equivalent of 80-120 micron thick. -All welding joints of pipe should be robotic welded with joints scalloped and dressed off by removing sharp edges and burrs. -Zinc primer paint to be applied at all welding points prior to finishing. -Pedals shall be made up Nylon alloy with rounded edge to prevent any impact of injury and seat to be made with virgin LLDPE plastic manufactured by rotational molding with minimum thickness of plastic 4.00mm, colorful and UV resistant environmental friendly. -Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company and is to be approved by Engineer-in-Charge. -Equipment to be fitted within built-in limiters to prevent unwanted movements. -All open ends of pipe to be colored by GI/LLDPE caps for user safety. -The equipment is to be fixed on ground with concrete of minimum strength of M25 and J shaped welded bolts and once the concrete is set, the equipment be fixed on to it and nuts, bolts be covered with the base plate cover.

Twister:- -Providing and Fixing Twister of size 1700 X 1300 X 1300 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick. - All pipes should be powder coated, hot dipped galvanized using Akzo Nobel or equivalent of 80-120 micron thick. - All welding joints of pipe are robotic welded with joints scalloped and dressed off by removing sharp edges and burrs. - Zinc primer paint to be applied at all welding points prior to finishing. - Handle bars are to be provided with high quality grip rubber. - Foothold shall be made up of Nylon alloy with rounded edge to prevent any impact of injury and seat to be made from virgin LLDPE plastic manufactured by rotational molding with minimum thickness of plastic 4.00mm, colorful and UV resistant environmental friendly. - Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. - Equipment to be fitted within built-in limiters to prevent unwanted movements. - All open ends of pipe to be colored by GI/LLDPE caps for user safety. - The equipment is to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, the equipment be fixed on to it and nuts, bolts be covered with the base plate cover.

Deepak Gupta