PROVN OF FURNITURE FOR OTM ACCN FOR 511 ASC BN (PHASE ONE OF TWO PHASES) AT AHMEDABAD CANTT

SCH 'A' PART-I (WOODEN FURNITURE)

HAT STAND WITH MIRROR (FD-233) (a) All dimention , shape , size , shall be as shown on Drg and specified. (b) 4 mm thick one side teak finish ply shall be provided with teak wood. (c) 3.5 mm thick BWR Grade ply shall be provided on back side. (d) 5.5 mm thick mirror shall be used (Make: Atul/Modiguard of first quality) (e) Hat Pegs Aluminium (Anodized) 120 mm long fixed with steel chromium plated screws. All teak wood/teak verneered ply wood surface shall be treated with two coats of french polish over coats of wood filler after necessary preparation of surface. (f) All wooden portion shall be french polished till attaining glossy finish. (g) Rest all as per Drg & specified.

SOFA SET 2 SEAT (FD-281) (a) Provide Sofa set 2 seater (1+1) cushioned as per drg and specefications. (b) Sofa set , 1+1 seater cushioned shall consist of two pieces of one seat each. (c) All wood work Shall be of well seasoned Ist class Teakwood. (d) Cushions for Seat and back shall be of 100mm thick foam of 40 density coverd with white long cloth before covering with good quality tapestry cloth stiteched with five std thead and and provide one zip make YKK. Rate of Tapestry cloth not less than 450/- per RM. Shade/Colour of Tapestry as approved by Engr.-in-Charge/GE. (e) all exposed surface of wood work shall be two coat french polished over a coat of wood filler after necessary preparation to surfaces with gloss finish french polished. Rest all as per shown on Drg.

TABLE CENTRE (FD-274) (a) The Overall size shall be shown on Drg. (b) All the timber work shall be of first class Indian teak wood free from knots/defects etc. (c) Table top shall be made out of 18 mm thick pre laminated MDF board exterior grade BWR, confirming to IS-14587. the edges shall be covered with 6 mm thick to teak wood beading. (d) One stiffener of size 20 x 40 mm ( not shown in Drg ) shall be provided between rails ( centre to centre ). (e) All exposed surface of timber shall be french polished. (f) Rest all as per Drg & speceified & directed by Eng-in-Charge.

CHAIR EASY (FD-229) (A) All wood work shall be of 1st class seasoned hard wood teak(B) All exposed surface of wood work shall be french polished with high gloss finish.(C) Hard rubber/PVC rings shall be screwed to the bottom of each legs(D) Rest all as shown on drawing

DESK WITH DAIS WOODEN (FD-399) All dimension, size & shape be as shown on drg and specified

POINTER MEDIUM (FD-1041) All dimension, size & shape be as shown on drg and specified

CHAIR EASY WITH CUSHION (FD-358) All dimension, size & shape be as shown on drg and specified

SOFA SET 5 SEATS (FD-373) (a) Provide Sofa set five seater (3+1+1) cushioned as per drg and specefications. (b) Sofa set , 3+1+1 seater cushioned shall consist of one piece of three seats and two pieces of one seat each. (c) All wood work Shall be of well seasoned Ist class Teakwood. (d) Cushions for Seat and back shall be of 100mm thick foam of 40 density coverd with white long cloth before covering with good quality tapestry cloth stiteched with five std thead and and provide one zip make YKK. Rate of Tapestry cloth not less than 450/- per RM. Shade/Colour of Tapestry as approved by Engr.-in-Charge/GE. (e) all exposed surface of wood work shall be two coat french polished over a coat of wood filler after necessary preparation to surfaces with gloss finish french polished. Rest all as per shown on Drg.

TABLE COOK HOUSE (FD-297) Over all size (a) All dimention size & shape shall be as shown on drg and as specified. (b) All wood work done Ist claas seasom hard wood teak. (c ) All Exposed french polished with high gloss finish. (d) Rest all as shown on drg.

SAFE MEAT (FD-370) All dimension, size & shape be as shown on drg and specified

SAFE MILK (FD-369) All dimension, size & shape be as shown on drg and specified

HOT CASE (FD-364) All dimension, size & shape be as shown on drg and specified

CHAIR DINING (FD-279) (a) All wood work shall be of 1st class seasoned hard wood teak (b) All exposed surface of wood work shall be french polished with high gloss finish.(c) Hard rubber/PVC rings shall be screwed to the bottom of each legs (d) The seat shall be made out of 04 mm thick moulded PVC visible like Godrej pattern in a single piece. The bottom side shall be moulded along with OVC ribs two nos. in perpendicular directions, each size 4x10mm size. The seat shall be fixed with screws.(e) Rest all as shown on drawing

TABLE DINING OR WITH ALUMINIUM TOP (FD-165) (a) All dimentions shape and size shall be as shown in drg and as specified. All wood work shall be first class wood teak. (b) Table top shall be 19mm thick block board with 22mm gauge aluminum sheet. (c ) 8 Nos of brackets & 4 Nos iron flat to join rails & leg shall be fixed with steel screw. (d) Hard rubber ring of best quality as approved shall be fixed to bottom of legs with suitable size steel screws. (e) Rest all as per drg and specification.

TABLE 60 CM X 60 CM (FD-293) All dimension, size & shape be as shown on drg and specified

TABLE 90 X 60 CMS W/O DRAWER (FD-284) All dimension, size & shape be as shown on drg and specified

TABLE 90 X 90 CMS (FD-1009) All dimension, size & shape be as shown on drg and specified

TEAPOY (FD-382) All dimensions shape and size shall be as shown on Drg and as specified. All wood work shall be seasoned first class teak wood. Irrespective of what is shown in the Drg.Top of teapoy shall be of 18 mm thick pre-laminated MDF board (exterier grade shape approved by Enge-in-charge/GE.) as specified here in before 4 mm thick teak wood edging shall be provided alround. Hard rubber/PVC ring shall be screwed to the bottom of each leg. All exposed surface of wood work shall be french polished. All joints fixing shall be done in accordance with standard workmanship and specifications one stiffener of size 20 X 40 mm (not shown in Drg ) shall be provided between bottom rails (center to center) . Rest all as per Drg and as specified.

TABLE SERVICE (FD-289) All dimension, size & shape be as shown on drg and specified

TABLE DINING 6 PERSON (FD/MAP-II/17) (a) All dimention , size and shape shown on drg. All wood work shall be first class wood teak. (b) Table top shall be 18mm thick MDF board (Exterior grade) as approved shade and 6mm teak wood beading provided all around the top. (c) All teak wood surfaces shall be treated with two coats of french polish over a coat of wood filler after necessary preparation. (d) 8 Nos of brackets & 04 Nos iron flat to join rails & legs shall be fixed with steel screw. (e) Hard rubber ring of best quality as approved shall be fixed to bottom of legs with suitable size steel screws. (f) Rest all as per drg and specified.

BENCH WORK SHOP (FD-1024) All dimension, size & shape be as shown on drg and specified

SCH 'A' PART-II (STEEL FURNITURE)

ALMIRAH MEDIUM STEEL (FD-1032) All dimensions, shape and size shall be as shown in drg and specified irrespective what is shown on drg. steel almirah body, shutter, back and shelves shall be manufactured with MS sheet of 1mm lthick. All joints/welding/fixed shall be done all as shown on drg and with standard workmanship. The handle shall be made out of brass chromium plated and 100 mm long. Almirah shall be provided with three way locking devic make of lock : Godrej/Harrison/Link. All steel surface internally and externally shalll be painted two coat of enamel paint over a coat of primer after preparation of steel surfaces. Painting shall be done with spray machine. Colour as approved by Engineer-in charge/GE. Rest all shall be done as per shown on drg.

BOOK CASE (FD-1028) All as shown in Drg. Over all size shall be, 540mm long and 310mm wide and 1675 mm high,All mild steel shall be 1.00mm thick All internaly and externaly steel surfaces shall be powder coated of colour shades as approved by Eng-in-Charges GE. Each sliding shatters shall be lifted up and slide Horizontally as shown in drg. Rest all as per shown on drg and as directed by Eng-in-Charge/GE.

CHAIR REVOLVING STEEL GODREJ PATTERN (FD/E6/MAP/01) Chair shall be supplied all as per details shown on the drg and as specified therein. Steel surface shall be powder coated. Cushion for seat and back shall be used of 40 density. Tapestry cloth not less than Rs. 350/per RM. Rest all as per Drg or as directed by Engr-in-charge.

CHAIR CBA STEEL WITH ARMS (FD-75(M) Over all size 535w X 560D X 900 H (Appox) Seats 455 High from floor.Plastic come seat & back should be godrej pattern. Armsshould be made Ist class teak wood with 02 coat of black paint.Should be 16 gauge. Alljoints welding and fixing shall be dione in accordence with the standers workman ship/Specifications. All Steel members shall be provided as per drg and shall be powder coated. Rest all as per Drg and Specified.

BOARD NOTICE (FD-1042) (a) Over all size 900mm X 600mm. (b) All Joints/Welding/ Fixings Shall be once in accordance with the standard workmanship and specificatuion. (c ) Rest all as per drg and as specified.

SIDE RACK WITH 4 TRAY STEEL (FD-1023) All dimension, size & shape be as shown on drg and specified

STOOL STEEL (FD-81(M) 1. Over all size 305mm L X 305mm W X 510mm H (Approx) 2. Angular frame with plain sheet Top stage. Enamelled finish to the reqel shed.

TABLE OFFICE OFFICER STEEL (FD-1003) (a) Over all size 1680mm X 870mm X 760mm. (b) Table Top shall be 18 mm thick MDF board (Exterior grade) as approved sgade and 6 mm teak wood beading provided all around the top. (c ) All Joints/welding/Fixing shall be done in accordance with the standard workmanship and specified. (d) All M/s Steel shall be powder coated of colour shade as approved by Eng-in-Charge/GE. (c ) Rest all as per drg and specified.

CHAIR CBA CUSHIONED WITH PADDED ARMS (FD-75(M)) Dimension : Overall size shall be 535mm wide, 560mm deep and 900mm high. Description : Seat shall be 455mm high from floor. Conduit pipe used for frame shall be 25mm dia steel tubing having wall thickness 1.6mm welding of frame where required shall be as directed by GE and in running welding grinded to give smooth surface.The seat and back frame of the chair shall be made up of teak wood frame over with 12mm commerical ply shall be fixed.The entire plywood then covered with 40mm foam cushion and best quality tapestry cloth/rexine cloth with standard 25mm foam cushion and best quality tapestry cloth /rexine cloth with standrad. Workmanship :- Bottom of legs shall have hard rubber shoes. Finish : All iron surfaces shall be painted with two coats of enamel grey paint over a coat of primer after preparation of steel surfaces. Painting shall be done with spray machine to achieves smooth surfaces.

TABLE OFFICE OFFICER STEEL (FD-1003) (a) Over all size 1680mm X 870mm X 760mm. (b) Table Top shall be 18 mm thick MDF board (Exterior grade) as approved sgade and 6 mm teak wood beading provided all around the top. (c ) All Joints/welding/Fixing shall be done in accordance with the standard workmanship and specified. (d) All M/s Steel shall be powder coated of colour shade as approved by Eng-in-Charge/GE. (c ) Rest all as per drg and specified.

BED HARD TOP STEEL OFFRS (FD/E6/MAP/08(R)) Bed hard shall be manufactured as per dimensions, shape and size shown in drawings and as specified. Headboard and footboard shall be made out of 18mm thick Pre laminated MDF board both side same finish laminated, exterior grade BWR conforming to IS-14587 shade approved by Engr-in-charge/GE screwed to 18mm thick MS strip all as per details shown on drg. Standard PVC edging (minimum 1.6mm thick shall be provided all around to the Head and foot board. Head rest and foot rest is to be supported by 65 mm x 25mm MS rectangular pipe of 16 gauge all other MS square pipe shall be of 25mm x 25mm of 16 gauge. Top of the bed shall be provided with 12mm thick plywood BWR grade conforming of IS - 303 Hard rubber shoes to be provided to each legs. All steel surface shall be painted internally and externally with two coat of synthetic enamel paint with spray machine over coat of steel primer colour as approved by Engr-in-charge/GE. All other items, fittings and fixtures shall be as shown on drg and as directed by Engr-in-charge/GE. Rest all as per Drg or as apecified.

TABLE BED SIDE (FD/E6/MAP/15(R)) (a) The Overall size shall be of 450 x 450 x 600 mm. (b) The main frame work fore the body is made out of 18 X 18 mm CRCA box section of 18 gauge thick. (c) The body , drawers shall be made of 18 mm thick MDF prelaminated board exterior grade confirming IS-14587. (d) The back shall be coverd with 12 mm thick plywood of BWR Grade confirming IS-303.

CHARPOY WITH HARD TOP (FD/MAP-II/01) All dimentions shape and size shall be as shown in drg and as specified. Long Rail and short rail shall be provided of MS Square Tube of size 65 mm x 25mm x 16 gauge. 25mm x 65mm, 16 gauge clet welded with frame as support to plywood. All joints welding and fixing shall be done in accordance with the standard workmanship/specification. All mild steel members shall be provided as per drg and shall be spray painted with two coats over a coat of primer. 12mm thick BWR Grade conforming IS-303 Make : Kitply/Centure/Greenply shall be fitted on top. Plywood shall be screwed with MS cleat and stiffners with cup and washer. Rest all other items, fitting and fixture shall be as shown on drg and as directed by Engr-in-Charge/GE.

RACK PIGEON HOLE (FD-1037) (a) All dimentions shape and size shall be as shown in drg and as specified. (b) All steel body back and shalves shall be manufactured with MS Sheet of 1 mm thick. (c ) All steel surfaces internally/Externally shall be powder coated as approved shade. (d) Rest all as per Drg and specified.

TABLE OFFICER STEEL CLEARK (FD-1004) (a) Over all size 1680mm X 870mm X 760mm. (b) Table Top shall be 18 mm thick MDF board (Exterior grade) as approved sgade and 6 mm teak wood beading provided all around the top. (c ) All Joints/welding/Fixing shall be done in accordance with the standard workmanship and specified. (d) All M/s Steel shall be powder coated of colour shade as approved by Eng-in-Charge/GE. (c ) Rest all as per drg and specified.

CHAIR CB STEEL (FD-75(M)) Over all size 535w X 560D X 900 H (Appox) Seats 455 High from floor.Plastic come seat & back should be godrej pattern. Armsshould be made Ist class teak wood with 02 coat of black paint.Should be 16 gauge. Alljoints welding and fixing shall be dione in accordence with the standers workman ship/Specifications. All Steel members shall be provided as per drg and shall be powder coated. Rest all as per Drg and Specified.

ALMIRAH LARGE STEEL (FD-1031) 1 All Dimensions given are in millimeters.2 All Joints/Welding/Fixing shall be Done in accordance with the standard workmanship and specifications. 3 All welded construction and steel work shall be painted internally & Externally with olive green or silver grey or as requird shade over a coat of primer. 4. Shutters shall be provided with a chromium plated handle and three way locking device 5. This Drawing superseders Drg No. FD-67(M) Sheet No1/1 6. Where ever 1.00 mm th MS Sheet Mentioned should be read 1.00 mm Nominal th MS Sheet

RECEPTICAL (FD/E6/MAP/13) The receptical shall have two suitable handles and one lid. The capacity of the receptical shall be 20 Ltrs. Make: Cello/Amko/Brite/Milton

FORM WITH BACK (FD-78(M)) (1) All dimension shape and size shall be in drg and as specified. (2) All Joints/Welding/ Fixings Shall be once in accordance with the standard workmanship and specificatuion.

LOCKER STEEL (FD-1029) All as shown on drawing. Overall size shall be 760mm long, 600mm wide and 1100mm high. All mild steel shall be 1mm thick. Two legs shall be provided to lockers as shown drg. Two nos chromium plated handle 100mm long shall be fixed to shutters. All internally and externally steel surfaces shall be powder coated of colour shade as approved by Engineer-in-charge/GE.Rest all as per shown on drg.and as directed by Engineer-in-charge/GE.

CHAIR WRITING (FD/E6/MAP/12) Construction shall be details shown on Drg. Fabric shall be cotains acrylic , polyester , poly-proplene in approved colour. All steel surface/member shall be powder coated as approved shade/colour as directed by Engr-in-charge/GE.Rest all as per drg and specified.

LADDER ALUMINIUM (FD-1025) All dimension , shape , size shall be as shown on Drg and specified.

ALMIRAH LARGE GLAZED (FD-104) 1 All Dimensions given are in millimeters.2 All Joints/Welding/Fixing shall be Done in accordance with the standard workmanship and specifications. 3 All welded construction and steel work shall be painted internally & Externally with olive green or silver grey or as requird shade over a coat of primer. 4. Shutters shall be provided with a chromium plated handle and three way locking device 5. This Drawing superseders Drg No. FD-67(M) Sheet No1/1 6. Where ever 1.00 mm th MS Sheet Mentioned should be read 1.00 mm Nominal th MS Sheet

TABLE 90 X 60 CMS WITH DRAWER (FD-283) (a) The overall size shall be 900x600x760mm.(b) The top & front portion of drawer shall be made of 18mm thick prelaminated MDF board conforming IS-14587 as approved shade. (c) The sides & back of drawers shall be of 12mm thick prelaminated MDF board. (d) All the timber parts shall be of first class teak wood free from cracks, knots and any defects. The surface shall be French polished till obtaining glossy finish.(e) Powder coated MS angular plated each of 150x30x5mm shall be screwed to the legs at right angles with long rails & short rails for extra strenth.(f) The drawers & keyboard shall be fitted on 1.6mm thick powder coated telescopic channels with proper wooden packing if required.(e) Rest all as per drg or as specified.

CHAIR VERANDAH (FD/E6/MAP/11) All dimensions, shape and size shall be as shown in drg and specified Frame shall be 19/20mm dia MS tube of 16 gauge thick. Seat and back shall be PVC as shown on drg. PVC/Hard rubber shoes shall be provided in each legs of approved quality. steel Frame shall be pre-treated with epoxy polyster powder coating with white colour. Rest all as per Drg and as directed by Engr-in-charge/GE.

TEAPOY VERANDAH (FD/E6/MAP/17) (a) Frame shall be of 18 mm square pipe .(b) Top 18/19 mm thick pre-laminated MDF board ISI, BWR with 04 mm thick teak wood edging shall be provided over 5 mm dia bar tray. © Hard rubber shoes shall be provided to legs. (d) All steel sirface shall be provided power coated.(e) Rest all as per shown on drawing.

RACK 6 TIER STEEL (FD-1038) (1) All dimensions, shape and size shall be in drg and as specified. (2) All Joints/Welding/ Fixings Shall be once in accordance with the standard workmanship and specificatuion.(3)All steel surfaces internally/Externally shall be powder coated as approved shade. (4) Rest all as shown on drg and as specified.

TRESTLE STORE ROOM (FD-1043) All dimension, size & shape be as shown on drg and specified

BLACK BOARD WITH EASEL (FD-1041) All dimension, size & shape be as shown on drg and specified

BOX KIT STEEL (FD-98) All dimension, size & shape be as shown on drg and specified

POINTER SHORT (FD-1041) All dimension, size & shape be as shown on drg and specified

RACK ARMS (FD-10) All dimension, size & shape be as shown on drg and specified

TABLE DUPLICATOR (FD-410) All dimension, size & shape be as shown on drg and specified

SCH 'A' PART-III (TP ITEMS)

DRUGGET (3M X 2M) All dimension, size & shape be as shown on drg and specified

DURRY 15' X 12' All dimention , shape , size shall be as shown on Drg and specified.

CHAIR BARBER WITH ADJUSTABLE NECK REST All dimension, size & shape be as shown on drg and specified

MIRROR LARGE SIZE (6' X 2 ') WITH FRAME All dimension, size & shape be as shown on drg and specified

RIFLE RACK FOR 10 RIFLES All dimension, size & shape be as shown on drg and specified

Please Enable Macros to View BoQ information