Karnataka

AOC

Works

Flood Protection Works

FLOOD CONTROL AND FLOOD MANAGEMENT OF BENNIHALLA UP TO CONFLUENCE OF MALAPRABHA RIVER (PHASE I)

Karnataka Neeravari Nigam Limited

KNNL Division MRBC Div No 4 Navalgund | Karnataka

Amount: ₹167.8 CrCloses: 31 Oct 2025Closed

Timeline

Published2 Oct 2025
Closed31 Oct 2025
Awarded2 Oct 2025

Bids

1 Bid2 Oct 2025

#	Company	Amount	Status
1	PRN INFRATECH PRIVATE LIMITED ₹184.3 Craccepted-aoc	₹184.3 Cr	accepted-aoc

Corrigenda

Corrigendum

1 updatesLatest on 21 Oct 2025

Tender Value

₹167.8 Cr

EMD Value

₹1.7 Cr

Closing Date

31 Oct 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka Neeravari Nigam Limited

Contact Person

Javed Mulla

Mobile Number

Work Description

FLOOD CONTROL AND FLOOD MANAGEMENT OF BENNIHALLA UP TO CONFLUENCE OF MALAPRABHA RIVER (PHASE I)

Tender Information

Tender ID

KNNL/2025-26/FP/WORK_INDENT3230

Reference Number

KNNL/2025-26/FP/WORK_INDENT3230

Tender Type

Open

Product Category

Flood Protection Works

Form of Contract

Two Tender Document System(Two Cover)

Location

KNNL Division MRBC Div No 4 Navalgund

Source Website

Subscribe to view

Documents Required

13 documents required · 13 mandatory

Technical Bid

RequiredA copy of the KPWD/CPWD Class-I Registration Certificate

RequiredCopy of Valid Employees Provident Fund Registration Certificate with recently paid challan copy

RequiredCopy of Valid GST Registration Certificate & PAN card

RequiredCopy of Income tax return filled for the financial year 2024-25

RequiredCopy of Valid ESI Registration Certificate with recently paid challan copy

RequiredTo qualify for award of this contract,each Tenderer in his name should have in the last 5 years i.e.2020-21 to 2024-25.Satisfactorily completed not less than 90 percent of contract value as a prime contractor,at least 1 similar work Suchas Earthwork Excavation,Earthen Embankment,concrete structures such as RCC Retaining wall/Bridge/Barrage/Aqueduct etc.,of value not less than 50 percent of the amt put to tender i.e.Rs.98.98 Crores and Duly updating the financial turnover at 10 percent per annum

RequiredTo qualify for award of this contract, each Tenderer in his name should have in the last five years i.e.2020-21 to 2024-25.Achieved in at least 2 Financial years a minimum Financial Turnover of Rs.263.93 Crores. All document/certificates issued by a CA should have a UDIN generated through the ICAI Portal.Certificate without UDIN the documents uploaded will be considered and treated as invalid document.Duly updating the financial turnover at 10 percent per annum.

RequiredTo qualify for award of this contract, each Tenderer in his name should have in the last five years 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25. Executed in any one year 12 months continuous, during the last five years the following minimum quantities of work Sl No Item Quantity Unit 1. Earthwork in excavation / silt removal 3429417 Cum 2. Earthwork in Embankment 268166 Cum 3. RCC Structure concrete quantity Grade M15 and above 9837 4. Reinforced steel 907 Tonne

RequiredAvailability by owning/lease the following key and critical equipment for this work Availability by owning at least 50 percent of the required.1 Self loader 4.00 cum capacity Total 03 Own 1 Hire/lease 1 2. Tippers Total 25 Own 12 Hire/lease 13 3. Excavator like JCB and Hitachi Total 50 Own 25 Hire/lease 25 4. Water Tanker Total 06 Own 03 Hire/lease 03 5. Plate Vibrator Total 04 Own 02 Hire/lease 02 6. Pump set 10 HP Total 06 Own 03 Hire/lease 03 7 Vibratory Roller Total 03 Own 02 Hire/lease 01

RequiredLiquid assets and /or availability of credit facilities of not less than Rs.59.38 lakhs. Credit lines/ letter of credit/ Certificates from Banks for meeting the fund requirement etc.

RequiredAssessed available tender capacity equal to AxNx1.5- B where A is equal to Max value of civil engineering works executed in any one year during the last five years 2020-21 to 2024-25 Updated to 2025-26 price level taking into account completed as well as works in progress N is equal to Num of years prescribed for completion of the works for which Tenders are invited. B is equal to Value at 2025-26 price level, of existing commitments & ongoing works to be completed during the next 18 months

RequiredEach of the documents uploaded to the e-portal should be self-attested by the contractor or an authorized representative in case of firm/company

RequiredThe Bidder or any of his partner shall not be under Corporate Debt Restructuring CDR / Strategic Debt Restructuring SDR or Bureau of Industrial and Financial Reconstruction BIFR in the last 5 Years prior to bid submission date. In this regard, the Bidder shall submit along with Bid, a certificate from their Statutory Auditor with a declaration that, the Bidder is not under CDR / SDR or BIFR.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Regarding GST Note a)The amount put to tender is Exclusive of GST b)GST shall be paid to the as per prevailing rates of Government order.c)The increase in GST shall not be paid in the extended period of contractor for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time. Quoted amount is exclusive of all deposits and Land Acquisition cost. The amount will be paid by the Nigam

A copy of the KPWD/CPWD Class-I Registration Certificate

Copy of Valid Employees Provident Fund Registration Certificate with recently paid challan copy

Copy of Valid GST Registration Certificate & PAN card

The intending bidder/firm/company should furnish list of Man power, machinery available with them for taking up the work as per section 3

Copy of Income tax return filled for the financial year 2024-25

Copy of Valid ESI Registration Certificate with recently paid challan copy

The intending bidder should have in last 5 years i.e. from 2020-21 to 2024-25, satisfactorily completed (not less than 90% of contract value) as a prime contractor, one similar work costing not less than 50% of the amount put to tender (197.95 x 50% Rs.98.98 Crores) in last five years. The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned Division and counter signed by the Superintending Engineer of the same circle or equivalent in case of other Government undertaking within India. The cost will be updated to the present value by giving a weight age of 10% for each year.Note 1) Similar nature of work means, Earthwork Excavation, Earthen Embankment, concrete structures such as RCC Retaining wall/Bridge/Barrage/Aqueduct etc

The intending bidder in his / its name should have in the last 5 years i.e., 2020-21 to 2024-25 achieved in at least 2 financial years, a minimum financial turnover of Rs.263.93 Crore (usually not less than two times the estimated annual payments under this contract) (Rs.197.95 Crore x 2 x 12 months / 18 months). The turnover prior to FY 2023-24 will be updated to the Present Price Level 2024-25 by giving weight age of 10% each year. Audited Profit and Loss account certified by a practicing Chartered Accountant bearing UDIN along with copy of Income Tax returns filed for the years indicated above should be furnished

To qualify for award of this contract, each Tenderer in his name should have in the last five years 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25. Executed in any one year (12 months continuous), during the last five years the following minimum quantities of work Sl No Item Quantity Unit 1) Earthwork in excavation / silt removal 3429417.00 Cum 2) Earthwork in Embankment 268166.00 Cum 3) RCC Structure concrete quantity Grade M-15 and above 9837.00 4) Reinforced steel 907.00 Tonne

Availability by owning/lease the following key and critical equipment for this work(Availability by owning at least 50% of the required).1) Self-loader 4.00 cum capacity (Total 03 Own 1 Hire/lease 1) 2) Tippers (Total 25 Own 12 Hire/lease 13) 3) Excavator like JCB & Hitachi (Total 50 Own 25 Hire/lease 25) 4) Water Tanker (Total 06 Own 03 Hire/lease 03) 5) Plate Vibrator (Total 04 Own 02 Hire/lease 02) 6) Pump set (10 HP) (Total 06 Own 03 Hire/lease 03) 7) Vibratory Roller (Total 03 Own 02 Hire/lease 01)

Liquid assets and /or availability of credit facilities of not less than Rs.59.38 lakhs. Credit lines/ letter of credit/ Certificates from Banks for meeting the fund requirement etc.

Assessed available tender capacity equal to (AxNx1.5- B) where A is equal to Maximum value of civil engineering works executed in any one year during the last five years (2020-21 to 2024-25) (Updated to 2025-26 price level) taking into account the completed as well as works in progress.N is equal to Number of years prescribed for completion of the works for which Tenders are invited.B is equal to Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 18 months (period of completion of the works for which Tenders are invited) Note:The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be certified by Statutory Auditors of the Company or by the proprietor of the company through an affidavit.If the bidder / bidders have participated in more than one work, the available tender capacity will be assessed and number of works will be awarded as per his available bid capacity.

The Bidder or any of his partner shall not be under Corporate Debt Restructuring (CDR) / Strategic Debt Restructuring (SDR) or Bureau of Industrial and Financial Reconstruction (BIFR) in the last 5 Years prior to bid submission date. In this regard, the Bidder shall submit along with Bid, a certificate from their Statutory Auditor with a declaration that, the Bidder is not under CDR / SDR or BIFR.

During technical evaluation, if the employer finds that any certificates / information furnished is false, such bidders will be disqualified and barred from participation in the bid.

If any bidder fails to satisfy the conditions mentioned above, such bids will be rejected and their financial bids will not be opened

The bidder should enclose the detailed methodology of execution of the scheme as per the scope of work

The Bidder shall be responsible for successful performance of the contract.

The Bidder to participate in the tender under single bid basis only. Any violation will attract disqualification of the bid.

The contractor/authorized signatory should attach his/her scanned signature to the Schedule-B before uploading and also submitting their tenders.

If any of the dates mentioned above happen to be a general holiday, the next working day holds good.

Further information can be had from the undersigned during office hours on Telephone No: 9663137692.

Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever

Corrigendum will be published in the web site/ newspapers/e-portal of all modifications /corrections if any.

Mineral Dispatch Permit (MDP) shall be paid (as per Mines and Geology Circular dated 7/11/2023 )as per the prevailing rates issued by the department of Mines and Geology from time to time together with GST at the applicable rates

The contractor is to be abide to pay the royalty charges as per the prevailing Government Orders

The intending bidders should note that, if any of lands either in part/ parts or in whole required for the work is not acquired by the Nigam, it shall be the responsibility of the bidder to take the possession of such land and start the work by obtaining consent of the land owners before commencement of work at no extra cost to the Nigam and no claim / delays whatsoever relating to on account of non-availability of land would be entertained.

If the percentage quoted by the contractor for the work is below ninety percent of the updated recast estimated amount put to tender, then the contractor shall furnish an additional performance security in the form of Bank Guarantee for an amount equivalent to the difference between the cost as per quoted percentage and 90% of the updated cost put to tender. In case of contractor quoting above 125% of updated cost put to tender, then the over and above 125% of the updated cost put to tender will be withheld during the progress of work. The additional performance will be released proportionately to the bill amount till the contractor achieves progress of the entire cost of the work as per agreement. The additional performance security and withheld amount in the later case will be released only after 30 days from the date of entire work contracted is fully completed and so certified by the competent. (If BG submitted while issuing fresh BG or extending any existing BG, claim period of a minimum one year from the date of expiry of validity period of BG is to be specified invariably).

They should abide by the directions of Government towards recovery of 1% (or as modified by the Government from time to time) Cess from the contractors bill under the provisions of building and other constructions worker welfare cess Act 1996

The intending bidders are advised to visit the site of work, make themselves familiar with local situation about the availability of construction materials, work men, land required for construction activities, etc.,

The contractor is responsible for any damages due to natural calamity the government or Nigam will not give any compensation for until the completion of maintenance period.

The intending bidder/firm/company are advised to visit the work site before submission of the tenders

The contractor should mention their recent correct portal address & mail address in declaration forms

The tender processing charges paid by the bidder/firm/company are not refundable even if the tender is cancelled.

The bidder/firm/company shall send the authorization letter for their representation duly attesting their signature.

Defect liability period for this work is 24 months from the date of issue of completion certificate by the competent authority for successful commissioning of the project

Useful rubble and Stone chips obtained from excavation shall be issued to the contractor for use on works (including enabling works and aggregate crushing) at the rates specified for those materials in the prevailing Schedule of Rates

The bidder/firm/company shall adhere to accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work & also land acquisition problems if any.

Typographical errors if any will not be the ground for any claims by the bidder/firm/company

The contractor shall also abide by the other conditions as laid down in Bid document

As per GO FD 5 EXP 12 / 2023 dated 15.05.2023, the contractor shall be abide to provid ee Bank Guarantee towards Security Deposits.

Within 20 days of the receipt of the letter of acceptance, the successful tenderer shall deliver to the employer security deposit in any of the forms given below for an amount equivalent to 5% of the contract price plus additional security for unbalanced tenders in accordance with clause 25.5 of ITT & Clause 44 of the conditions of contract for all works

The contractor should take still photos / videos of the work before commencement of works, during execution and after completion compulsorily. These photos/ videos should be made available to the implementing officer, for immediate reference during review of works to enclose it with completion certificate.

The bidder at the time of execution of the agreement should give a detailed execution plan and fortnightly program to complete the work in full manner without fail. The program can be modified with mutual consent

The work will be constantly monitored by the Executive Engineer and if there is any slippage in achieving the program/a penalty / liquidated damages as indicated in the agreement / tender document would be levied. However, these liquidated damages will be refunded if the contractor makes good the shortfall in the subsequent months or completes the whole work before the stipulated date of completion.

All materials like steel, cement etc., required for the above work should be procured by the contractor only at his own cost. And these materials will have to be got tested by the competent authority before put to use.

As per the Karnataka building and other construction workers welfare cess act 1996, 1 percent of the bill amount will be deducted from the bills.

The payment of bills of this work will be made as and when the letter of credit is received under the same head of account from KNNL/Government of Karnataka.

The contractors should adhere to the accepted action plan submitted by him under any circumstances without linking to the pending bill payment of the work.

The tender processing charges paid by the bidders are not refundable even if the tenders are cancelled.

The tenderer has to make his own arrangement for procurement of all materials required for the work. There is no departmental supply of materials.

Contractor should procure only ISI mark materials and submit necessary quality control certificates from the authorized quality control authority, before execution

Sub leasing of work in any form is prohibited

The validity period of EMD shall be for a minimum period of 225 days from the date of opening of the tenders

The EMD of the unsuccessful bidder will be refunded only after the acceptance of the tender by the competent authority as per tender clause

The tender inviting authority has got right either accepting tender or rejecting the tender without assigning any reasons.

In case of death of contractor after executing the agreement commencement of the work , his legal heir if any eligible registered contractor and willing can execute and complete the work at the accepted tender rates irrespective of the cost of the work

EMD amount and Amount put to tender will be as mentioned in the e-portal of respective work

No quarries are approved by KNNL for materials. The quarries considered are for the estimate purpose only. The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard.

Debarment of tenderers: The procurement entity may debar tenderer for a period not exceeding 3 years from participation in its tenders following such procedures as may be prescribed on the ground that tenderer is engaged in corrupt or fraudulent practices in competing or executing the contract including misleading the procuring entity or any stage of procurement activity with a fraudulent intention. ( KTPP Act 26A).

Technical Criteria

Others

A copy of the KPWD/CPWD Class-I Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

Copy of Valid Employees Provident Fund Registration Certificate with recently paid challan copy

Valid EPF Certificate

Copy of Valid GST Registration Certificate & PAN card

GST Registration

Copy of Income tax return filled for the financial year 2024-25

ITR Filed Copy (Mentioning PAN)

Copy of Valid ESI Registration Certificate with recently paid challan copy.

Valid ESI certificate

The intending bidder should have in last 5 years i.e. from 2020-21 to 2024-25, satisfactorily completed (not less than 90% of contract value) as a prime contractor, one similar work costing not less than 50% of the amount put to tender (197.95 x 50% Rs.98.98 Crores) in last five years. The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned Division and counter signed by the Superintending Engineer of the same circle or equivalent in case of other Government undertaking within India. The cost will be updated to the present value by giving a weight age of 10% for each year.Note-: 1) Similar nature of work means, Earthwork Excavation, Earthen Embankment, concrete structures such as RCC Retaining wall/Bridge/Barrage/Aqueduct etc.,

Work Done Certificate

Audited CA Certificate of Annual Turnover

Work Done Certificate

Others -- Machinary

Liquid assets and /or availability of credit facilities of not less than Rs.59.38 lakhs. Credit lines/ letter of credit/ Certificates from Banks for meeting the fund requirement etc.

Line of Credit

Others -- Bid capacity

Each of the documents uploaded to the e-portal should be self-attested by the contractor or an authorized representative in case of firm/company

Others -- Self attested

Others -- Statutory Auditor with a declaration

Work Locations

Fee & Financial Details

Tender Fee Amount

₹7,500

EMD Fee Amount

₹1.7 Cr

Important Dates

Last Activity

2 Oct 2025

Published

2 Oct 2025

Bid Opening

3 Nov 2025

Download Ends

16 Oct 2025

Pre-Bid Meeting

16 Oct 2025

BOQ Preview

•

FLOOD CONTROL AND FLOOD MANAGEMENT OF BENNIHALLA UP TO CONFLUENCE OF MALAPRABHA RIVER (PHASE I)

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...

•

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Excavation and removal of silt and silt mixed with sand in dry condition from River / Nala by mechanical means including disposing off the same in spoil bank in layers as directed with all other ancil...

•

Excavation and removal of silt and silt mixed with sand in slushy condition from River / Nala by mechanical means including disposing off the same in spoil bank in layers as directed with all other an...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40kg each complete as per drawing and Technical specification.

•

A. Boulder Laid ...

•

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...

•

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, ker...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification. Complete with all lead and lift as directed by Engineer incharge. A.G...

•

Providing hearting embankment using impervious soil collected in embankment area in heaps as part of disposal of excavated soil from canal in layers of 250 to 300 mm thickness (before compaction), inc...

•

Providing hearting embankment using selected impervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials,machinery, labour,all other opera...

•

Providing casing embankment using semi-pervious / pervious soil collected in embankment area in heaps as part of disposal of excavated soil from canal in layer of 250 to 300 mm (before compaction) inc...

•

Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction ) including cost of all materials, machinery, labour,all other ...

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

•

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

•

Water Bound Macadam

•

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling ...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant...

•

Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing and laying insitu vibrated M-15grade cement concrete using 40 mm down approved, clean, hard, graded aggregates with placing and sinking plums of size 150 to 80 mm upto 15 percent for piers/ ...

•

Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a ...

•

Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. - Pile diamete...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prim...

•

Providing Steel Liner 10 mm thick for Curbs and 6 mm thick for Steining of Wells including Fabricating and Setting out as per Detailed Drawing..Complete with all lead and lift as directed by Engineer ...

•

Providing and constructing 300 mm thick rubble stone pitching set in CM 1: 5 proportion by volume with pin headers at 2 per sqm including cost of all materials from approved source, labour, packing st...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) .Complete with all lead and lift as directed by Engineer incharge. ((SR Item No.5....

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Internal & Celling plastering :

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, provid...

•

External plastering : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement p...

•

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces.Complete with all lead and lift as directed by Engineer incharge.Complete with...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Internal painting & Ceiling Painting

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resis...

•

External painting

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remov...

•

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm (0.2 mm), corners of the door frame to...

•

UPVC Ventilators

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elast...

•

Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free wit...

•

Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel,...

•

Providing and constructing dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing / w...

•

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...

•

Providing and constructing contraction joints by fixing 230 mm wide central bulb type PVC water stop in single line supported by 10 mm dia. steel dowel rods on either side at 1 metre interval includin...

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than...

•

Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...

•

Providing rubble and murum filling in layers of 250 to 300 mm including cost of all materials,machinery, labour, watering, ramming and all other ancillary operations Complete with all lead and lift as...

•

Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-732...

•

Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift gate ( with top seal ) consisting of skin plate, siffeners, horizontal and vertical girders, wheels, ...

•

Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, breast wall liner ( upto one vent height plus 1 m above the ro...

•

Design, fabrication, supply, erection, testing and commissioning of adequate capacity screw type hoist consisting of supporting structure, platfom, railing, ladder with all accessories for operating c...

•

Raising of Roadside Plantations (SR Item 2.11.a , page 19-20 of Forest/Horticulture/Watershed Department SR, 2022-2023)

•

Turfing with Sods

•

Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the engineer including pr...

•

Boundary pillar / Guard Stone-Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting. (SR I...

•

Supplying and fitting of 30-Watt white LED solar streetlight with corrosion resistance 6m pole & metallic frame structure to hold and adjust different components like Battery, SVP, Lights etc with all...

•

Back filling the excavated trench on the U/S of dam with soil from approved borrow areas including cost of all materials, machinery, labour, all operations such as excavation, sorting, spreading, wate...

•

Supply and fixing of FRP "C" section frame of size 100mm and wall thickness of 8mm (1mm) and Rib thickness of 12mm smooth finish with marine grade gel coat, with side projections at every 1 Mtr. inter...

•

Supplying and fixing FRP Needle gate made out of concealed GI tubes of suitable size & thickness. Zinc coating of not less than 360GSM, I.S make hot rolled from any reputed pipe manufacturing company....

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

E- Bank Guarantee Reg_0001.pdf

Others - E Bank Gaurantee circular • 1.06 MB

Debarment circular 31.5.24(3).pdf

Others - Debarment circular • 0.60 MB

DTP R4 (1).docx

Tender Document • 30.96 MB

Verification of CA documents.pdf

Others - CA document • 0.13 MB

MDP-Royalty circular for attachment all dtp and e-proc (1).pdf

Others - MDP circular • 2.36 MB

Royalty Rate(1).pdf

Others - Royalty • 3.35 MB

Corrigendum Documents

Final Corrigendum.pdf

pdf • 0.72 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

PRN INFRATECH PRIVATE LIMITED

₹184.3 Craccepted-aoc