SPECIAL REPAIRS TO SMQs AT MAKARPURA CAMPUS AT AFS BARODA

Amount

Taking down chowkats (wooden/steel) or frame exc. 1.50 sqm but nexc 4 sqm each with shutter (without taking of shutter from the frame) and removing from site complete all as specified and as directed.

Taking down Chowkhats or frames (wooden/steel) not exc 1.5 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down (PVC) Chowkhats or frames not exc. 1.5 sqm each but with shutters (without taking off shutters from the frames) and removing from site complete all as specified and as directed.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing),removing serviceable tiles to store and rubbish off the premises.

Taking down cement plastering of any description on brick / stone/ concrete wall / ceiling surfaces of any description including racking out joints hacking for key, scrubbing down with water etc.

Dismantling of Stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floors, apron etc complete all as specified and directed.

Demolition of plain cement concrete (unreinforced concrete) of any description and in any Position not otherwise specifically provided for complete all as specified and as directed.

S&F Second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, Rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M&L Forming jambs to openings in CM 1:4 including cutting, toothings and properly bonding into old work including facing and pointing to match existing work, complete all as specified and directed.

M & L P CC 1:3:6 type C-1 as in bed blocks for hold fast and similar work etc complete all as specified and directed.

S & F Small articles of steel such as hold fast, etc of Gde Fe 410-0 or Fe-290 Gde E-165 complete all as specified and directed.

M & L Preparing and treating ends of posts, back of chowkats with coal tar black paint, area tarred exc. 0.10 sqm but not exc. 0.50 sqm all as specified or as directed.

M & L Preparing and treating small articles such as hold fasts with coal tar black paint, area tarred not exc. 0.10 sqm all as specified or as directed.

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and as directed by Engr-in-Charge.

S & F 30 mm thick factory made flush door shutter solid core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed.

S & F 35mm thick 2nd class HW glazed and skeleton shutters (partly panelled and partly glazed) open rebated and prepared to receive glass/wire cloth gauge etc,(without sash bars) edges of framing plain , chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part I, section 8, clause 8.20(a).

S&F Solid PVC door frame of size 50x47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube,in opening as per specification and drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

M & L Preparation of new wood surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

S & F 300mm mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified & directed.

S&F 100mm size, butt hinge medium weight cold rolled mild steel & fixed complete all as specified & directed.

S&F 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 200mm length aluminum, anodised, barrel tower bolts of extruded section alloy complete all as specified and directed.

S&F 100mm length aluminum, anodised, barrel tower bolts of extruded section alloy complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified & directed.

S S&F 100mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified & directed

S&F Floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

M&L MS framed work such as grills, gratings etc., with ends of bars, framed guard bar, Iron doors etc., complete all as specified and as directed, conforming to Fe-290, Gde E-165 complete all as specified and directed by Engr-in-Charge

S&F Mild steel 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed by Engr-in-Charge

M&L Preparation of new surfaces of steel or iron over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zincl chrome primer Complete all as specified and as directed

S & F Powder coated aluminium frame (minimum thickness of powder coating 0.50 micron) and minimum 2mm thickness for doors, windows ventilators frame with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F Powder coated aluminium (minimum thickness of powder coating 0.50 micron) sliding windows, all as given here-in-after complete all as specified and as directed. Frame:- Three track section shall be of weight not less than 1.060 kg/m. Shutter:- Consists of 03 Nos Shutters i.e 02 Nos od Glazed shutters and 01 No of Gauzed shutter. Sections of shutter (stiles and rails) sections shall be of weight not less than 0.562 kg/m. Builders hardware:- Standard locking device for glazed shutters.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and as directed by Engr-in-charge.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and as directed by Engr-in-charge.

S&F 4mm thick figured glass pin headed type and glazing with oil putty in squares not exc 0.5 sqm in each pane.

S & F 18/19mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work in repairs including teakwood lipping 6mm thick fixed with nails fixed for cub board shutter .etc complete all as specified and as directed .

S&F Mild steel pressed handles 100 mm size oval type stove enamelled black all as specified and directed.

S&F Particle boards 18/19mm thick interior grade BWR type adhesive, fixed with screw to timber frame in shelves, drawers etc complete all as specified and as directed

S&F Harrison Curtain rails, mild steel, chromium plated of thickness 40-6 microns, outer dia 25mm inner dia 20mm with fixing brackets, stops, rollers etc. complete all as specified and as directed

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

M &L Rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces).

M&L Rendering 15 mm thick on fair faces of brick or concrete surfaces in CM 1:4 finished fair and even (external surfaces) all as specified & directed.

M&L Rendering 5 mm thick in CM 1:3, on concrete surfaces as in ceiling ,finished fair and even all as specified.

M&L 3mm thick wall care putty on walls complete all as specified and as directed.

M & L Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer all as specified and as directed .

M & L Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M & L Complete removal of existing treatment and preparing wall surfaces and applying two coats of oil emulsion distemper over a coat of alkali resistant primer over 3mm wall care putty complete all as specified and as directed.

M & L Preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M & L Preparation of newly plastered surfaces and priming with alkali resistant priming paint and painting with two coats of exterior ACRYLIC Emulsion paint (Colour or shade as approved by GE) complete all as specified and as directed.

M&L Complete removal of existing treatment by scraping down completely on brick/stone walls /concrete surfaces thoroughly, rubbing down washing with water to the entire satisfaction of Engineer-in-Charge and applying two coats of exterior ACRYLIC Emulsion paint (Colour or shade as approved by GE) over and including a coat of primer as per manufacturers instruction complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed

M&L Complete removal of existing treatment by scraping down completely on ceiling surfaces thoroughly, rubbing down washing with water to the entire satisfaction of Engineer-in-Charge and applying two coats of exterior ACRYLIC Emulsion paint (Colour or shade as approved by GE) over and including a coat of primer as per manufacturers instruction complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed

M&L Preparation of old painted surfaces of wood and wooden based surfaces over 10cm width of girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L Cutting chases in brick work, pinning in, making good to facings where required and pointing in CM 1:3 for concealed water tubing all as specified and directed.

Taking down steel tubing and connections 15 mm dia including all fittings and fixture fixed to existing line all as specified and directed.

Taking down steel tubing and connections 25 mm dia all as specified and directed.

S & F15 mm bore unplasticised PVC pipes medium grade including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete and making good the area to match with existing surface complete all as specified and as directed.

S & F 25 mm bore GI tubes medium grade including all fittings fixed to walls, ceilings or in floors etc.,complete all as specified and as directed.

S&F Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete as in repairs all as specified.

S & F PVC (SWR) ‘P’ trap of 110mm complete as in repairs all as specified.

S & F PVC (SWR) floor trap plain with grating including jointing with solvent cement of 75 mm dia complete as in repairs all as specified.

S & F 15mm dia bib tap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for union pipe or brass ferrule complete all as specified

S&F 15mm dia Pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and flynuts, screwed for union pipe complete as in repairs all as specified

S & F PVC flushing cistern symphonic action type, low level 10 litre capacity including flush pipe complete as in repairs all as specified .

S&F Vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm excluding supply of taps, but including waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and flt nuts , flange end embedded in red lead cement and other end fixed , chain and plug and porcelain stopper and brackets including cutting for and pinning in ends of brackets or erecting stand , making connections to waste complete all as specified and directed

S & F PVC connections 15mm size with PTMT nuts of length 450mm complete as in repairs all as specified ..

S&F Vitreous china wash basin (WHB) , white , flat back , size 450 mm x 300 mm excluding supply of taps, but including waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and flt nuts , flange end embedded in red lead cement and other end fixed , chain and plug and porcelain stopper and brackets including cutting for and pinning in ends of brackets or erecting stand , making connections to waste and supply pipes and complete as in repairs all as specified

S & F CP health faucet with 1.5m flexible tube and hook as in repairs all as specified

S & F Brass chromium plated shower rose 125mm size swivel type as in repairs all as specified.

S&F 15mm dia angle valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed as in repairs all as specified .

S&F15mm dia brass CP wall mixer for shower including mixing of hot & cold water screwed down for iron pipe as in repairs all as specified

S&F 15mm dia brass CP two way bib tap complete as in repairs all as specified

S&F 20mm dia 600mm long tubular towel rail brass chromium plated complete as in repairs all as specified

S&F Full glass shelf corner 300mm fixed to wall with bracket and screws complete all as specified and as directed.

S&F Stainless steel plate rack of size 900X750X250mm with screws and necessary fittings incl cutting to hole fixed to wall complete all as specified and directed.

S & F Stainless steel sinks with drainage board made of 1mm thick sheet for kitchen with plugs washer, waste pipes, cast iron cantilever brackets, connecting union to pipe over all size 915mm x 460mm with bowl size 410 x 330 x 160mm,including bedding in cement mortar to dwarf wall including fixing cantilever brackets and connecting unions to pipe complete all as specified and as directed.

M&L Non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM 1:6, complete all as specified.

M&L Non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting/dado over and including 10 mm thick rendering in CM 1:4 as backing coat, even and fair to receive tiles etc complete all as specified

M&L Non skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.11 sqm but not exc. 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 as bedding layer for floor finishes.

M&L Glazed ceramic coloured tiles in vertical surface such as dado/skirting etc 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 as backing coat complete all as specified

M & L 20mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including making the edges half round complete all as specified

S&F PVC (SWR) soil waste, vent pipes in any length with or without ears, with rubber ring joints 75mm dia fixed to walls complete all as specified.

S&F PVC (SWR) soil waste, vent pipes in any length with or without ears, with rubber ring joints 110mm dia fixed to walls complete all as specified.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified.

S&F PVC (SWR) branch piece, single (Y) or equal 110mm bore with access door complete all as specified.

S&F PVC (SWR) branch piece, double (Y) equal or unequal 75mm bore with access door complete all as specified.

M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in sub base of flooring finished surfaces rough to receive floor finishes, complete all as specified

M & L PCC 1:5:10 type E2 using 40mm graded stone aggregate as in, foundation filing and mass concretecomplete all as specified and directed.

M & L Rendering/bedding layer 15mm thick in CM 1:3 with water proofing compound on fair faces of brick on concrete slab & sides of sunken portion, finished even and smooth without using extra cement.

M & L Priming surfaces and applying normal treatment (for moderate condition) using glass fibre bore bitumen felt grade 2, all as specified and directed.

M & L APP based polymeric membrane with overlap of 100mm minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified.

S&F 25mm bore GI tubing medium grade' galvanized for laying in floors as spout pipe for sunken floors, all as specified and directed.

M & L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection and finished even and smooth without using extra cement.

M&L Complete removal of existing water proofing treatment over roof including PCC of any thickness description in any position including cleaning wire brushing, watering remove of debris up to 1500 mtr distance etc., complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 using 12.5 mm stone aggregate as in, levelling course including demolition of unserviceable unreinforced cement concrete as in roofs complete all as specified and directed.

M&L Rendering/ bedding layer of mortar 10mm thick in CM 1:3 on brick or concrete surfaces mixed with integral water proofing compound as per manufactures instruction while the concrete is green. Note:- WPC shall be measured & paid separately.

Supply only integral water proofing compound complete all as specified and directed.

M&L Preparation of new surfaces and applying cold bituminous primer @ 0.30 ltr/Sqm confirming to IS-3384 and laying APP polymer modified fiber glass reinforced membrane 3mm thick weight not less than 3.0kg/sqm (modified bituminous water proofing membrane ) with plain finish with polyester base reinforcement, sealing all over with lap of 100mm in length side and 150mm on width side of membrane by torching the same complete all as specified and directed .

M&L Applying one coat of bituminous aluminium paint @100gms/sqm as per manufaturer's instructions complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tank, two layered (cylindrical vertical with closed top) hoisted and fixed in position upto 500 litres capacity confirming to IS specification complete as in repairs all as specified

Taking down carefully copper/ aluminium point wiring (Light, fan, socket, power and Bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder , regulators, sockets light fittings etc , removing material to store for keeping in safe custody or for taking credit , and making good disturbed surface of walls, floors, etc. complete all as specified and directed by Eng-In-Charge.

M&L Point wiring in repair for modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade drawn through metallic rigid / PVC heavy duty concealed conduit with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site incl all connected accessories , box made from not less than 1.6mm GI sheet factory made complete all as specified and directed by Eng-In-Charge for the following.

(a) One light point controlled by one switch complete

(b) One Ceiling fan/Exhaust Fan point controlled by one switch complete.

(c) One 3 pin socket out let 5 Amps on the independent board.

(d) –do- but one 3 Pin socket out let 5 Amps on the same board.

(e) One bell point controlled by one switch.

Ditto- all as above item No.104 but with cable of size 2.5 Sq mm PVC insulated on independent board for power plug 15 Amps. complete all as specified and directed by Eng-In-Charge.

S&F Ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified and directed by Eng-In-Charge.

S&F Lamp holder, insulated body with back plate for battern fitting complete all as specified and directed by Eng-In-Charge.

M & L Sub main wiring using 2 run single core 6 sqmm FRLS PVC insulated and unsheathed cable with copper conductor 1100 Volt grade ISI mark drawn in and including Concealed PVC Conduit with accessories like bend, Tee, etc fixed on wall and ceiling and connecting to earth dolly and including 6 sqmm earth wire PVC insulated and unsheathed complete as in repairs all as specified and as directed

M & L Sub main wiring using 2 run single core 4 sqmm FRLS PVC insulated and unsheathed cable with copper conductor 1100 Volt grade ISI mark drawn in and including Concealed PVC Conduit with accessories like bend, Tee, etc fixed on wall and ceiling and connecting to earth dolly and including 4 sqmm earth wire PVC insulated and unsheathed complete as in repairs all as specified and as directed

S&F Modular switch one way 6A,1 Module, complete all as specified and directed by Eng-In-Charge.

S&F Modular switch one way 16A,1 Module, complete all as specified and directed by Eng-In-Charge.

S&F Modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed by Eng-In-Charge.

S&F Modular socket 16/15A-2/3 pin combined 2 Module complete all as specified and directed by Eng-In-Charge.

S&F Modular bell push 6A,1 Module, complete all as specified and directed by Eng-In-Charge.

S&F Fan regulator 2M FSC modular type 240 volt complete all as specified and directed by Eng-In-Charge.

S&F MCB DB 04 way vertical sheet metal enclosure TPN 415 volts, 50 Hz with IP-43 protection , double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting with one MCB as incomer complete as in repairs all as specified.

S & F MCB DB 12 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete as in repairs all as specified. (Note : Copper thimble shall be used for connection of cable .

S & F Door bell ding dong, multi tune, chime and buzzer.

S&F Sheet metal enclosure SP with two pin and socket with one single pole MCB 20 Amps, B Curve 240 volts complete all as specified.

Disconnecting and taking down old exiting light fittings of any description and supply and fixing indoor decorative channel housing fitting slim LED batten 10 watt (Mirror Light) 2 feet with polycarbonate and diffuser AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable from ceiling rose to connector of the light, fixing the same with two Nos PVC square box complete all as per specified.

Disconnecting and taking down old exiting light fittings of any description and supply and fixing indoor decorative channel housing fitting slim LED batten 20 watt with polycarbonate and diffuser AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable from ceiling rose to connector of the light, fixing the same with two Nos PVC square box complete all as per specified.

Disconnecting and taking down old exiting light fittings of any description and supply and fixing LED security light luminaire 30 watt freedom, pressure die cast aluminium housing, heat resistant glass, IP66 protection, better option for uniform distribution complete all accessories pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete.

Labour only for taking down of existing exhaust fan carefully and refixing after servicing, lubrication and replacement of bush & painting the exhaust fan with two coats of enamelled paint complete.

S&F MCB, single pole 240 volts 6 to 32 Amps capacity C series fixed in DB's complete as in repairs all as specified.

S&F MCB, single pole and neutral link 240 volts 40 to 63 Amps capacity B series in DB's complete as in repairs all as specified. .

S&F MCB, Three pole and neutral link 240 volts 40 to 63 Amps capacity B series in DB's complete as in repairs all as specified. .

S & F LED bulb 09 watt 5 star rating complete as in repairs all as specified. .

S & F Geyser 25 Ltrs, BEE-5 star rating Hidden LED Digital display, Feather touch Temp setting panel, Colour changing led indication, Whirl flow technology, . Make- Havells CAT PART No- GHWCAITIV025 (Adonia ii)

S&F Exhaust fan with louvers of size 300 mm sweep, 900 RPM 230 volts single phase AC supply complete with, bolt, nuts and washers, suitably embedded in the wall including making suitable opening and provisioning of flexible cord copper of size 23/0.0076 from ceiling rose to exhaust fan for giving connection complete all as specified and directed by Engineer-in-Charge

M&L Earthing complete with galvanised steel earth electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level connected to and including galvanised earth lead as GI strip of 32X6mm size by means of bolts,nuts, check nuts and washer etc made of galvanised iron and connected to earthing test point all as shown in electrical plate No.3 of SSR Part I 2009 and as specified or indicated and testing on completion including excavation &earth work in any type of strata, PCC (1:3:6) type C1 earthing chamber, precast RCC slab 50 mm thick in reinforced cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric (XPM jali weight not less than 4 Kg/Sqm), cast iron frame, funnel with wire mesh, 40 mm bore medium grade GI watering pipe, lugs, 40 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note: (i) Rate quoted under this item is deemed to include the cost of 7.5m length of earth lead and its protection tube. Any addition in length shall be measured and paid extra.

Harsh Infrastructure

divyarsh entrprise

DMA PROJECTS

National Rewinding Works