Constructing Artificial Insemination Centre at Village Vadadla Ta. Balasinor Dist. Mahisagar

No. without

without GST

1 Excavation for Foundation upto 1.5 m depth including Sorting out and stacking 270.00 Cum. 85.17

of useful materials and disposing of the excavated stuff upto 50 M. Lead.(A)

Loose or soft soil

2 Excavation for Foundation from 1.50m to 3.0m depth including Sorting out and 128.00 Cum. 84.04

stacking of useful materials and disposing of the excavated stuff upto 50 M.

Lead. (B) Dense or Hard soil.

3 Brick work using common burnt Clay building bricks having crushing strength 201.00 Cum. 2298.65

not less than 35 kg / sq.cm in foundation and plinth in Cement mortar 1:6 (1

cement : 6 fine sand) (b) Conventional

4 Providing and laying cement concrete 1:2:4 (1- Cement : 2 Coarse sand : 4- 75.27 Cum. 2951.54

graded stone aggregates 20 mm nominal size) and curing complete (A)

Foundation and Plinth

5 Providing and laying controlled cement concrete M.250 work with curing etc. 52.50 Cum. 3714.76

complete including the cost of formwork but excluding the cost of reinforcement

for R.C.C. work in for footing

6 Providing and laying Ordinary cement concrete M.200 and curing etc. complete 20.30 Cum. 4903.12

including the cost of formwork but excluding the cost of reinforcement for

R.C.C. work in for COLUMNS

7 Providing and laying Ordinary cement concrete M.200 work with curing etc. 49.20 Cum. 4166.66

complete including the cost of formwork but excluding the cost of reinforcement

for R.C.C. work in for BEAMS.

8 Providing and laying ordinary cement concrete M-200 work with curing etc. 35.50 Cum. 4269.27

complete including the cost of formwork but excluding the cost of reinforcement

for R.C.C. work in for Slab for All floor.

9 Filling available excavated earth (excluding Rock) in trenches, plinth, sides of 195.00 Cum. 68.99

foundation etc. in layers not exceeding 20.cm. in depth consolidating each

deposited layer by ramming and watering.

thickness including watering, ramming and consolidating etc. completed.

11 Filling in plinth with sand under floors including watering ramming, 58.00 Cum. 344.48

consolidating and dressing etc. complete.

12 Brick work using common burnt Clay building bricks having crushing strength 110.00 Cum. 2443.84

not less than 35 kg / sq.cm in super structure above plinth level up to floor two

level in Cement mortar 1:6 (1 Cement : 6 fine sand) (b) Conventional

13 Half brick masonary in common burnt Clay building bricks having crushing 73.00 Sqm. 396.88

strength not less than 35 kg / sq.cm in in C.M 1:3 (1 Cement : 3 coarse sand)

in with 2 nos. of 6 mm dia.mild steel round bars after every three coarse

embedded in cement mortar in super structure above plinth level up to floor two

14 Providing and fixing door having side hung double shutter having Marble door 4.00 Sqm. 2543.04

frame, with factory made 25 mm. thick flush door both side pre laminated with

lach lock as per detail colour & pattern apporoved by this office including

necessary fixtures and fastenings.

It. figures

Description of Item Qty. Unit Amount

No. without

without GST

15 Providing and fixing door having side hung single shutter having Marble door 15.00 Sqm. 2453.76

frame, with factory made 25 mm. thick flush door both side pre laminated with

lach lock as per detail colour & pattern apporoved by this office including

necessary fixtures and fastenings.

16 Providing and fixing FRP frame size 100 x 50 mm and 28mm thick FRP 5.00 Sqm. 2960.56

depress panel shutter having extra reinforcement on sides & edges in Gel coat

finish. The core of the shutter & frame is to be filed up with injected fire

retardant grade polyurethene foam done in situ alongwith embedded wooden

pieces for stiffening & also taking hinges & fintures. The whole FRP frame &

shutter is to be water proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve.

17 Providing and fixing standared extruded of alluminium section of size 63.5mm x 37.00 Sqm. 1625.02

38.10mm x1.95 mm (of Jindal section No. 4605, @ Wt. 1.094 Kg per mt) with

colour anodized alluminium frame for Window with 3 mm thick frosted glass as

details etc.complete.

18 Providing and fixing standared extruded of alluminium section of size 63mm x 3.60 Sqm. 1249.88

38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour

anodized alluminium frame for ventilation with 3 mm thick frosted glass as

details etc complete for Ventilation

19 Providing and fixing polished marble stone with necessary moulding around sill 52.40 Sqm. 1622.31

& Jamb of Doors, Windows & Ventilation.

20 Providing and fixing M.S grills of required pattern to Marble frames of windows 1563.00 Kgs 62.22

etc.with M.S.flats at required spacing on frame all-round square or round bars

with rounded headed bolts and nuts or by screws including priming coat and

two coats of oil paintings etc.comp. (a) Plain grill

21 Providing and fixing M.S. railing 90 cm height fixed on side of stair with 7.00 Rmt 431.96

necessary hold fast with 12 x 12 mm M.S. square vertical balustrade 2 no each

tread with 40 x 5 mm M.S. flats tie at 30 cm height from the tread with 40 mm

dia M.S. pipe railing on the top including cutting welding fabricating including

priming coats and two coats of oil painting etc. complete.

22 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse 3.00 Cum. 5531.55

sand : 4- graded stone aggregates 20 mm nominal size) for R.C.C lintel

including finishing smooth with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement.

23 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- 3.00 Cum. 4770.45

graded stone aggregates 20 mm nominal size) for reinforced concrete

Chhajjas not exceeding 10cm. thickness upto floor two level including finishing

the exposed surfaces with cement mortar 1:3 (1-cement, 3 Fine sand) to give a

smooth and even surface centering and formwork and curing complete

excluding cost of reinforcement.

24 Providing and laying ordinary cement concrete M-200 work with curing 2.70 Cum. 4893.02

complete including cost of formwork and reinforcement for reinforced concrete

work in (E) Staircases including landing upto floor two level

25 Providing T.M.T Fe 415 bar Reinforcement for R.C.C work including bending 21122.00 Kg. 40.57

binding and placing in position complete up to floor two level.

26 Providing & Laying 24" x 24" Vitrified 8 mm thick tiles Flooring over 20 mm 86.00 Sq.m. 870.22

(average) base of Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) on new

surface or fixing on exiting flooring by adhesive material including jointed with

colour cement slurry including finishe with flush pointing & cleaning the surface

etc. complete.

It. figures

Description of Item Qty. Unit Amount

No. without

without GST

27 Providing and laying polished Kota stone slab flooring over 20mm (Average) 172.00 Sq.m. 553.70

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid

over and jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing moulding and polishing etc. complete.(A)

25mm thick

28 Providing and laying polished kota stone slab 25mm thick in risers of steps, 9.00 Sq.m. 635.76

Skirting , Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement :

coarse sand) and jointed with gray cement slury mixed with pigment to match

the shade of slab including rubbing, moulding and polishing etc. complete.

29 Providing & laying Ceramic flooring tiles (0.3m x 0.6m) in skirting, risers of 237.00 Sq.m. 564.52

steps & dedo on 10 mm thick Cement plaster 1:3 (1 Cement : 3 Coarse Sand)

& Jointed with white cement slurry

30 Providing 15mm thick cement plaster in Two coat on Rough (Similar)side of 358.00 Sq.m. 136.08

single or half brick walls for interior plastering upto floor two level and finished

even and smooth in finishing with a floating coat of neat cement slurry (ii)

cement mortar 1:4 (1-cement : 4 sand) & providing 10 mm x 10 mm groove at

junction of structural member etc. complete.

31 Providing 10 mm thick cement plaster in Two coat on fair side Brick/Concrete 205.00 Sq.m. 120.84

walls for interior plastering on ceiling and soffits of stair upto floor two level

finished even and smooth and finishishing with floating coat of neat cement

slurry & Providing 10 mm x 10 mm Groove at junction of Structural member (1)

Cement Mortar 1:3 (1 Cement : 3 sand)

32 20 mm thick Sand faced cement plaster on wall upto height 10 mts.above 480.00 Sq.m. 186.67

ground level consisting of 12 mm thick backing coat of C.M 1:3 (1 cement :

sand )and 8 mm thick finishing coat of C.M 1 : 1(1 cement : 1 Sand) etc.

33 Providing and laying polished kota stone slab 25mm thick in risers of steps, in 52.00 Sq.m. 635.76

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement

slury including rubbing and polishing etc. complete.

34 Wall painting (three coats) with Plastic emulsion paint of approved brands like 563.00 Sq.m. 69.44

Apex or equivalante and manufacture on undecorated wall surfaces to give an

even shade including thorougnly brushinf the surface free from mortar

droppings and other foreign matter and sand papered smooth.

35 Finishing wall with water proofing cement paint of approved brand and 480.00 Sq.m. 32.92

manufacturand of of required shade on wall surface (two coats) to give an even

shade after throughly brshuing the surface to remove all dirt and remains of

loose powdered materials.

36 Providing, laying and jointing in true line and level I.S.I. mark 25mm dia. 30.00 Rmt 96.49

U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by

Engineer in charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials.

37 Providing, laying and jointing in true line and level I.S.I. mark 15mm dia. 50.00 Rmt 76.54

U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by

Engineer in charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials.

38 Providing and fixing gun metal check or non return full way wheel valve.(C) 25 3.00 Nos 438.27

39 Providing and fixing gun metal check or non return full way wheel valve.(A) 15 3.00 Nos 196.59

It. figures

Description of Item Qty. Unit Amount

No. without

without GST

40 Providing & fixing Chromium plated brass half turn flush cock of approved 5.00 Nos 275.04

quality including fixing in pipe line etc. complete.(ii) 25 mm dia.

41 Providing and fixing 600 mm x 450 mm. bevelled edge Mirror or superior glass 3.00 Nos 530.25

mounted on 6 mm. thick A. C. sheet or plywood sheet and fixing to wooden

plugs with C. P. Brass screws and washers.

42 Providing and fixing C.P.Brass Towel rail complete with C. P. Brass brackets 3.00 Nos 430.15

fixed to wooden plugs with C. P. brass screw. (b) 600 mm x 20 mm size

43 Providing and fixing Brass screws down Bib tap chromium plated of 15 mm dia. 15.00 Nos 196.59

44 Providing and fixing water closet squatting pan (Indian type W.C.Pan) size 580 3.00 Nos 831.00

mm. vitereous china long pattern white colour 100 mm. size P or S trap with

jointing the trap with the pan & soil pipe in C. M. 1:1 and fixing a pair of footrest

of size 250 mm. x 130 mm. x 30 mm., in C. M. 1:3 fixing and G. I. Inlet

connentions for flush pipe with W.C. PAN etc. complete.

45 Providing and fixing cast iron (spun) Nahni trap of the following nominal 6.00 Nos 348.99

diameter of self cleaning design with C. I. Screw down or hinged gratting

including cost of cutting and making good the walls and floors 100 mm inlet

and 50 mm outlet.

46 Providing and fixing S.W Gully trap with C.I grating brick masonary chamber 4.00 Nos 1148.88

and water tight C.I.cover with frame of 300 mm x 300 mm size (inside) with

standard weight. (i)Square mouth traps.(B) 150 mm x 100 mm size -P or R

47 Providing & laying, jointing in true line and level 110 mm diameter UPVC (Type- 40.00 Rmt 473.44

B ) conforming to IS 13592 -1992 with one end plain and other end socketed

with rubber ring & fittings conforming to ISI 14735 - 1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

lubricant , pipe shall be fixed on wall using of PVC clamp of the size 110 mm

dia. x 149 mm length x 145 mm height at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings such as

bends, shoes, etc. including cost of all materials.

48 Constructing brick masonary chamber for underground C.I. Inspection chamber 3.00 Nos 2471.79

and bends with bricks having crushing strength not less than 35 kg./sq. cm. In

C. M. 1:5 C.I. Cover with frame (lightn duty) 455 x 610 mm internal dimensions

total wt. of cover with frame to be not less than 38kg. (weight of cover 23 kg. &

wt. of frame 15 kg.) R.C.C. top slab with 1:2:4 (1 cement : 2 coarse sand :

graded stone aggregate 20 mm. nominal size) foundation concrete 1:5:10.

Inside plaster 15 mm thick with C.M. 1:3 finished smooth with a floating coat of

neat cement on wall & bed concrete etc. complete (i) inside dimensions 455 x

610 mm. x 450 mm. deep for single pipe line.

49 Constructing soak well having diameter of 2.25 M and depth of 3.30 m 1.00 No 9834.88

including excavating honey com masonary in C.M. 1:3 of half back masonry

and filling the 1.0 m. depth with bick bast covering the top with R.C.C. slab of

cm. thick with necessary opening covered by the stone and jointed with cement

and filling the necessary earth on it.

50 Supplying and fixing PVC water tank of ISI make including delivery at site, 2000.00 Ltr 4.15

supply and fixing of inlet, outlet, air vent overflow, Ball cock, drainage sleeves

of the specified size, with necessary neo-prene gasket / packing / washers, GI

washer & check nuts etc. complete as directed on terrsce, loft in bathrooms etc

in any height. The rate shall include for fixing additional accessories supplied

by the supplier accessories.

It. figures

Description of Item Qty. Unit Amount

No. without

without GST

51 Providing and fixing wash basin with single hole for pillars tap with C.I. or M. S. 5.00 Nos 1501.74

brackets painted white incl. cutting holes and making good the same including

fixing M. I., fisher union of 40 mm. dia.,C. P. Brass waste of 40 mm. dia,15 dia

pillar tap and brass screw down stop tap of 15 mm dia and etc. complete.(A)

Vitreous china (ii) flat back wash basin 550 mm x 400 mm size in white colour

52 Providing and fixing urinal of approved quality connecting the urinal with waste 3.00 Nos 593.38

pipe trap etc. complete. (A) White eathern ware flat back or corner type size:-

53 Providing and fixing wash down water closet (European type, W.C. Pan with 2.00 Nos 1103.79

integral `P' or `S' trap including jointing the trap with soil pipe in cement mortar

1:1 (1 cement : 1 fine sand) (seat and cover to be measured and paid

seperately) with Black plastic seat and cover for wash down water closet with

C.P. brass hinges and rubber buffers.

54 Contructing A ground level sump for storage a drinking Water with monoblock 1.00 No 19074.57

motor pump set with wooden box cover for motor etc. complete.

55 Providing septic tank of inside dimensions( 2.5 mt. x 2.0 mt.x 1.5 mt.) as 1.00 No 19651.71

Directed by incharge with brick masonary of CM 1:6 the foundation floor with

1:5:10 B.B.C.C. finished with 15 mm C.P. in C.M. 1:4 root cover of R.C.C. slab

incl. connection pipe from inlet and outlet etc.complete.

56 Providing and laying China Mosaic type water proofing treatment on terrace 255.00 Sq.m. 712.41

including (a) Applying neat cement slurry 2.75 Kg./Smt. of cement admix with

water proofing compound after cleaning the surface (b) laying cement concrete

using brick bats 25mm to 100mm size with 50% cement mortar 1:5 (1 cement :

5coarse sand) admixed mortar proofing compound over 20mm thick layer of

cement mortar 1:5 to required slope including rounding of junctions of walls

and slabs (c) after two days of proper curing applying a second coat of cement

slurry (d) finishing the surface with 20mm thick cement mortar 1:4 (1 cement :

4 coarse sand) and china mosaic tilling & finally finishing the surface with

trowel with white cement slurry (e) after finishing the whole terrace shall be

flooded with water for a period of two weeks.

57 PROVIDING BORE & SUBMERSIBLE MOTOR PUMP OF 250 MM DIA & 50 1.00 Job 154676.99

mt. Depth IN ALLUVIAL STRATA BY DIRECT ROTARY RIG. including all the

taxes complete As per instructed by EIC.

58 Providing & Fixing Almonard make Heavy duty Exhaust fan 12" (300 mm) 6.00 Nos. 3607.14

including fitting charge and necessary Electrical Wiring Connection.complete

as dircted by Engineer in charge.

59 Providing & fixing in position collapsible steel shutters with vertical channels 20 1.50 Qtl. 3280.70

x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size with top and bottom

rails of T_ rin 40 x 40 x 6 mm with 38mm dia.steel pulleys complete with bolts,

nuts, locking arrangements, stoppers handles including applying a priming coat

of read lead paint.

60 Providing and fixing rolling shutters of approved make made of 80mm wide 17.50 Sq.m. 3748.72

M.S.Laths inter locked together through their entore length and jointed together

at the ends by and locks mounted on specially designed pipe shaft with bracket

plates, guide channels and arrangements for inside and outside locking with

push-pull operation complete including cost of hood cover and spring (B)

Shutter having width above 3.5 m.

61 Providing and fixing pre-cast Rubber Dye inter locking concrete block 80 mm 314.13 Sq.m. 634.86

thick with grade of concrete M-200 pnumatic compressed by mechanically

pressed and as per approved design including 75 mm Sand layer for levelling

and filling the joint with sand in proper line and level etc complete as dircted by

Engineer in charge.

It. figures

Description of Item Qty. Unit Amount

No. without

without GST

62 Dismentalling the exixting building as directed by engineer in charge. 1.00 Lump 26785.71

63 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earthwire of 45.00 Pt. 216.43

1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed in

/flushed on wall/ceiling, complete with 6A Tissino Type ISI marked flush type

switch / bell push and accessories erected on Metal / PVC Box covered with

mm thick PC (Polycarbonet) / Acrylic sheet. with necessary Lamp holder/ceiling

rose / H.D. Connector as directed. (e) in existing pipe

64 Point wiring for independent PLUG with following size mains earthwire of 1.5 3.00 Pt. 270.54

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed in

/flushed on wall/ceiling , complete with ISI marked 3 / 5 Pin socket and tissino

type switch erected with earth continuity connection erected on Metal / PVC

box covered with 3 mm thick PC (Polycarbonet) / Acrylic sheet, (e) in existing

pipe, Cat-II [B] 16A Plug with 2-2.5 sq. mm Cu. Mains

65 Point wiring for looped PLUG with tissino type single pole ISI marked Switch 24.00 Ea. 54.11

and Socket erected with necessary connections erected on wooden /Metal/

PVC Box covered with 3 mm thick PC (Polycarbonet) /Acrylic sheet for open /

concealed wiring for following size, [A] For 6 Amp

66 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper 150.00 Mtr. 54.11

conductor wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size, (e) in existing pipe, (b)

2 wire 2.5 sq. mm

67 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper 30.00 Mtr. 108.21

conductor wire in following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (e) in existing pipe(b) 2 wire 6 sq.

68 Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having 250.00 Mtr. 27.05

double-locking arrangement with grooves, trunking of size not below 12.5 mm

in height as per IS with accessories of PVC/Resin polypropylene not below

mm thick duly sealed in joint & erected on wall / ceiling of following size .(2)

69 Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) 2.00 Ea. 234.46

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having

following capacity, (B) 40 Amp, Cat-II

70 Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V 8.00 Ea. 85.67

A.C. system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark, Cat-II

71 Approved make ELCBs / RCCBs conforming to IS: 12640 and having 1.00 Ea. 1812.59

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable

for operation on single phase 240 V. having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed, (ii) 40 Amps. DP,

72 Providing and erecting Sheet Steel powder coated MCB distribution board - 1.00 Ea. 982.04

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used),

(F) Single phase 8 way SS Double door,

73 Sheets steel powder coated enclosure suitable for incorporating One/Two nos. 1.00 Ea. 148.79

It. figures

Description of Item Qty. Unit Amount

No. without

without GST

74 Providing and erecting Approved make Ceiling fan with double ball bearing ISI 17.00 Ea. 1533.04

mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy

and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core

flexible wire with earthing. [Make shall be approved by Engineer in charge], Cat-

75 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 18.00 Ea. 443.68

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium pressure

die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt, LED driver efficiency > 85% (fitting

required LM-79 & LM-80 Certificates) (NOTE: Below description have shown

any wattage capacity between the ranges shown) (A) Tube light with integral

driver.(d)22-24 Watts, Surge 2KV,IP20,4 feet Cat-II

76 Providing & erecting following Shockproof tissino type accessories erected on 17.00 Ea. 198.39

3 mm thick PC (Polycarbonate) sheet in PVC/ Metal Box. erected on wall/

ceiling, (14) Electronic Hum free EME Socket Type Steps Fan Regulator,

77 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the 17.00 Ea. 112.72

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

box / Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing

78 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder (b) 5 to 8 9.00 Ea. 117.23

watts cat-II

79 Providing and laying cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 14.00 Cum. 2130.02

Crushed stone agg.of 20 mm nominal size) and curing completeexcluding cost

of form work in (a) Foundation and plinth

80 Providing and laying Cement Concrete 1 : 3 : 6 ( 1 Cement : 3 Coarse Sand : 6 6.30 Cum. 2779.30

Crushed stone aggregates 20 mm nominal size ) and curing complete including

cost of form work in (a) Wall Caps / Copings)

81 Providing and fixing M.S.Grills of required pattern with M.S.Flats at required 240.00 Kgs 118.95

spacings and frame alround,square or round bar,with round headed bolts and

nuts or by screws plain grill including approval quality of primer and two coat of

oil painting etc.

82 20mm thick sand faced cement plaster with Gutka on walls upto height 10 764.00 Sq.m. 219.59

meters above ground level consisting of 12mm thick thick backing coat of C.M.

1:3 (1 cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1cement :

sand) etc. complete including painting with two coats of water proofing cement

paint to give an even shade.

83 Excavation for foundation upto 1.50 mt. depth including sorting out and 28.00 Cmt. 77.46

stacking of useful materials and disposing of the excavated stuff upto 50 meter

lead. Dense or Hard soil.

84 Providing and filling in foundation with ordinary cement concrete M 100 mix and 3.00 Cmt. 1884.73

providing necessary vertical pin headers including formwork, vibrating,

ramming and curing complete.

85 Providing and filling in foundation with ordinary cement concrete M 150 mix and 49.00 Cmt. 2888.42

providing necessary vertical pin headers including formwork, vibrating,

ramming and curing complete.

It. figures

Description of Item Qty. Unit Amount

No. without

without GST

86 Supplying and fixing reinforced concrete heavy duty non pressure pipes with 15.00 Rmt 1869.40

collars for culverts including setting and jointing the pipes in cm 1:2 watering

and laying (to level of slope) of I.S class NP-3 of following internal diameters in

900mm dia.

87 Providing and fixing number plate of marble stone of required size set in C. M. 2.00 No. 262.42

1 : 4 including finishing and engraving letters etc. complete.

88 White washing with lime on wall surface (two coats) to give an even shade 24.00 Sq.m. 6.86

including thoroughly booming the surface to remove all dirt, dust; mortar drops

and other foreign matter.

89 Providing and constructing a junction chamber of size 0.35 × 0.35 × 0.6 mt, 20.00 Nos 633.05

including connecting rainwater pipes as per detail drawing or as directed by

Engineer in charge

90 Providing and laying in ground 100 mm Diameter, P.V.C. Rain water pipe with 120.00 Rmt 108.21

necessary fittings connection as per detail drawing or as directed by Engineer

91 Providing and laying in ground 150 mm Diameter, P.V.C. Rain water pipe with 100.00 Rmt 162.32

necessary fittings connection as per detail drawing or as directed by Engineer

92 Providing and constructing filter Chamber of size 2.06 × 1.21 × 1.20 mt, 4.00 No. 6836.44

including connecting Rain water Pipes as per detail drawings or as directed by

Engineer in charge

93 Constructing Percolation Sockwell of 2.54 mt internal clear diameter and 5.00 2.00 No. 31554.38

Mt depth including brick massonry in C:M 1:6, R.C.C. top slab of 10 cm thick,

filling with gravel etc, complete as per detail drawing or as directed by Engineer

in charge.

94 Providing and Supply and fix multi purpose ABC Dry Chemical Powder Stored 6.00 No. 1983.93

pressure type fire extinguisher IS 15683, ISI marked. Brand : Safety fire

95 Providing and Supply and fix water stored pressure type fire extinguisher IS 6.00 No. 2344.64

15683, ISI marked. Brand: Safety fire

96 Office Table :- 18mm thick three layer pre laminated particle board Work with 3.00 No. 20535.71

PVC Edge band 2mm thick wrapped around the top, Decorative aluminium

bidding in top and modesty including all necessary elements with necessary

features and fastning finish all as per directed by Engineer in charge. 6 FT

Office Table (Dimension :- 180 cm x 90cm x 75 cm) with suitable brand.

97 Revolving Chair :- Mid-Back Mesh Office Chair Ergonomic Swivel Computer 3.00 No. 14285.71

Chair, Lumbar Support Adjustable Height Task Chair with Armrest (Black) with

suitable brand.

98 File Rack :- lack Adjustable 5-Shelf Shelving Unit Storage Rack Utility Rack 4.00 No. 11607.14

Garage Shelves Display Rack Steel Boltless Rivet Rack, 60 inches Height 1-

Pack ({5 - SECTION } 5' [H] X 2'[L] X 1'[D]) with suitable Brand.

99 Internal Storage : Tidying up will be a thing of the past with this multiple 5.00 No. 13392.86

shelving unit. Cleverly designed internal structure allows easy categorisation

and storage. Durable CRCA Steel Construct : CRCA Steel has stood the test

of time and durability.

Sleek Design : The furniture with which you furnish your office reflects your

style and sensibilities. The sleek Wardrobe adds style points to your office

Dimensions W x H x D (cm): 91.4 x 198.1 x 48.3 / Primary Material : Mild Steel

It. figures

Description of Item Qty. Unit Amount

No. without

without GST

100 Visiting Bench :- Chair Three Seater Waiting Area Chair Reception Chair 2.00 No. 13392.86

325-350 Kg Weight Handling Capacity. Durable Parts And Support, Our Chairs

Have Whole Welded Connections Product Dimensions: Length (70 inches),

Width (23 inches), Height ( 31 inches)

Color: Shining Silver, Material : Mild Steel ( Iron ), Finish: Chrome Finish, Style:

Contemporary

101 Steel Stool :-Office Chair Stainless Steel Stool with suitable Brand. 4.00 No. 2946.43

102 Chair :- Web Designer Plastic Chair for Office Armless with suitable Brand. 7.00 No. 2232.14

Total Rs.

i.e. Rs. Fifty Two lacs Seventeen thousand Seven hundred Nine and Ninety Nine paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ___________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Balasinor Mahisagar Mahisagar