Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 CrAccepted-AOC | ₹2.9 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹3.0 Cr+₹8.8 L (3.02%)Rejected-Finance DEBIMATHURAPUR GOBINDAPUR SAGAR SOUTH 24 PARGANAS | 24 PARAGANAS SOUTH | WEST BENGAL | 743373 | ₹3.0 Cr+₹8.8 L (3.02%) | L2 | Rejected-Finance 2ND LOWEST |
| 3 | L3₹3.1 Cr+₹17.0 L (5.84%)Rejected-Finance GANESHUPUR 3RD GHERI KAKDWIP SOUTH 24 PARGANAS PIN 743347 | KAKDWIP | SOUTH 24 PARGANAS | WEST BENGAL | 743347 | ₹3.1 Cr+₹17.0 L (5.84%) | L3 | Rejected-Finance 3RD LOWEST |
| 4 | L4₹4.3 Cr+₹1.4 Cr (48.9%)Rejected-Finance VILL JAMBURBASAN P O NANDAKUMAR DIST PURBA MEDINIPUR PIN 721632 | NANDAKUMAR | PURBA MEDINIPUR | WEST BENGAL | 721632 | ₹4.3 Cr+₹1.4 Cr (48.9%) | L4 | Rejected-Finance 4TH LOWEST |
| 5 | L5₹4.7 Cr+₹1.8 Cr (60.0%)Rejected-Finance | ₹4.7 Cr+₹1.8 Cr (60.0%) | L5 | Rejected-Finance 5TH LOWEST |
Tender Value
₹5.8 Cr
EMD Value
₹10 L
Closing Date
4 Jul 2025, 5:00 pmClosed
SE EC
Office of the Superintending Engineer, Eastern Circle Postal Address Jalasampad Bhawan, 8th Floor, Salt Lake, Kolkata-700091
Anti-Erosion work with dumping of porcupine cages and circular brick sausage in between ch. 0.85 km to ch. 2.12 km for a length of 1270.0 M along the right bank of river Muriganga at Mouza-Kashtala, Block and PS- Sagar, Dist.-South 24 Parganas
2025_IWD_862928_1
WBIW/SE/EC/NIT-04(e)/2025-26
Open Tender
CIVIL WORKS
Percentage
120 days
Mouza-Kashtala, Block and PS- Sagar
Please refer Tender documents.
6 documents required · 6 mandatory
₹10 L
Yes
O/o SE EC
7 Sept 2026
13 Jun 2025
7 Jul 2025
13 Jun 2025
4 Jul 2025
17 Jun 2025
17 Jun 2025
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Making cubical bamboo porcupine cages with bamboo of 60 mm to 75mm dia. having length of 1.8 metre each for all horizontal and vertical struts and 2.5 metre length for diagonal struts, 3nos horizontal and 3 nos vertical struts should be placed equi-distant from each face to make the square cage of outer dimension 60 cm x 60 cm and projecting each strut by 60 cm on all directions. Two nos dioganals or cross bamboo posts should be placed on each face having their centre tied with the centre of cage properly including fitting, fixing corners, vertical, horizontal and diagonal struts with iron nails not less than 20 cm long and tying corners with 16 SWG galvanized iron wires, filling the cages with 1st class kiln burn Brick @ 40 nos bricks per cage. Cages builts with 10 SWG hexagonal or square pattern 10 cm mesh, with proper lapping, tying and sewing with 10 SWG GI wire including cost of all materials, carriage to site and laying the same in the bed or slope of the river etc. complete as per direction of the Engineer - in - Charge ( N.B::- If G I wirenetting is not considered then Rs. 215.00 per cage may be deducted from the following costs, towards cost of wire netting including OH and conctarcor's profit .) For cages of size 60cm x 60cm x 60cm with 1st class kiln burn Bricks . | |||||
| 1.01 | Single cage. | 5,591 | Each Cage | 4,260.44 | ₹2,38,20,120.04 |
| 2 | Extra rate for items abovre for dumping by boat in flowing water including cost of hiring of boat, boatman, loading into boat and dumping in specified location including all other equipments etc. complete as per direction of the Engineer-in-charge. | 5,591 | Each Cage | 97.73 | ₹5,46,408.43 |
| 3 | Making sausages circular in section (any length) made with 1st classkiln burnt / 1st class picked jhama full bricks rolled inside wire net caging made of 10 S.W.G. galvanised iron wire square pattern (internal dimension of mesh will be 100 mm. x 100 mm. square) galvanised wirenet caging with proper lapping of minimum 150 mm and sewing with 12 SWG. galvanised iron wire including cost of all materials,carriage up to site, placing and laying the same after preparing thebed/trench to proper slope etc. complete as per direction of the Engineer-in-charge. (cost is excluding the cost of end pieces .)
A) 1.0 m diameter. | 6,480 | Metre | 4,902.59 | ₹3,17,68,783.2 |
| 4 | Supplying, fitting, fixing end pieces for rectangular / square / circular sausages at the ends, with 10 SWG / 8 SWG G I wire net of different mesh sizes tying & sewing the same maintaning a lap langth of 150 mm all around with 12 SWG G I wire complete, including the cost of supply of wire netting,fitting etc, complete as per direction of the Engineer - in - charge.
A) Mesh size 100 mm x 100 mm with 10 SWG wire. | 509 | Sqm. | 187.36 | ₹95,366.24 |
| 5 | Labour charges for launching sausage length above 2.00 metre from boats in proper position and where use of multiple boat is necessary, including hire charges of boat, boatman etc complete as per direction of the Engineer-in-charge.
A) Sausage of 1.0 m diametre. | 6,480 | Metre | 330.13 | ₹21,39,242.4 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
BOQ_1937673.xls
BOQ • 0.35 MB
173131849.pdf
Tender Documents • 1.55 MB
173131853.html
Tender Documents • 0.07 MB
2911.pdf
Tender Documents • 1.86 MB
BARCHART.pdf
Tender Documents • 0.06 MB
DRAWING.pdf
Tender Documents • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .