Urgent Mechanical work to be carried out at various lift irrigation schemes of MISD Baramulla.

Amount

Repairs to the minor leakage (450cm long) at 04 spots along 300mm dia M.S rising main at lift irrigation scheme Johama at various cracked portions of pipe, pipe flanges, end to end joints, rusted bolts etc. by way of multiple weld runs, using M.S filler material and using appropriate sized of M.S plate of 3mm thick wherever required to make joint strong and leak proof. The job includes hire charges of D.G set, welding set, Gas cutter, load carrier, manual labours, palmative packing five kg and skilled welder for completing the repair work. After successful completion of repair work, the rising main shall be tested on full load.

.Repairs to the minor leakage (289cm long) at 02 spots along 400mm dia M.S rising main at lift irrigation scheme Delina Main at various cracked portions of pipe, pipe flanges, end to end joints, rusted bolts etc. by way of multiple weld runs, using M.S filler material and using appropriate sized of M.S plate of 3mm thick wherever required to make joint strong and leak proof. The job includes hire charges of D.G set, welding set, Gas cutter, load carrier, manual labours and skilled welder for completing the repair work. After successful completion of repair work, the rising main shall be tested on full load.

Repairs to 06 cusec Hz split casing pump of lift irrigation scheme Gantamulla unit no.02 by way of mechanical transportation, loading, unloading and handling of 06 cusec Hz split casing pump using appropriate means of transport as Mini truck like Tata mobile, Bolero Camper or similar with 1km lead.

Extra per kilometer for lead >5.0 kms up to 10.0 kms.

Providing and fitting of ball bearing 6315 of SKF /Reputed make with adequate greasing.

Fabrication, turning, finishing and fitting of SS shaft sleeve as per old sample approx. 2kg/job.

Providing and fitting of palmetto packing.

Fabrication, turning, finishing and fitting of Bronze/G.M wearing ring as per old sample approx 1.5kg/job.

Repairs to the existing damaged shaft SS by way of rebuilding of shaft using high quality electrodes and then turning the shaft on lathe machine to remove the excess material deposited. The job includes threading or rebuilding and facing etc. as per requirement and restore the original dimension and profile of the shaft.

Providing and fitting of TC- 18 coupling set complete along with flexible rubber tyre. The job also includes taking of dimensions at site and then boring of holes at workshop to the coupling halves which shall match with size of shaft of pump and motor.

Shifting back pump from workshop to site after proper repairs by way of mechanical transportation, loading, unloading and handling using appropriate means of transport as Mini truck like Tata mobile, Bolero Camper or similar with 1km lead. Extra per kilometer for lead >5.0 kms up to 10.0 kms (8km). The job also includes the charge of fitting and testing of pump on full load at site.

M/S EURO LIGHT ENTERPRISES

M/s Sopore Engineering Works