Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹37.6 LAccepted-Finance | 1 | Accepted-Finance The lowest | |
| 2 | 2₹37.8 L+₹15,478 (0.41%)Accepted-Finance | 2 | Accepted-Finance 2nd lowest | |
| 3 | 3₹41.7 L+₹4.1 L (10.8%)Rejected-Finance | 3 | Rejected-Finance Third lowest |
Tender Value
₹39.2 L
EMD Value
₹50,000
Closing Date
29 Sept 2023, 11:00 amClosed
Executive Engineer
Kerala Water Authority, P.H. Division, Malappuram
Minority WSS to Cherukaramala in Vengara panchayath-
2023_KWA_604406_1
EE/PH/MPM/18/2023-24
Open Tender
Civil Works - Water Works
Item Rate
360 days
Vengara
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,760
₹50,000
10 Jan 2025
20 Sept 2023
30 Sept 2023
20 Sept 2023
29 Sept 2023
20 Sept 2023
Amount
Laying pipe
100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.
100.1.5:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock.
100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.
15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
100.9.7:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 75 mm nominal outside diameter pipes.
18.17.5:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore
18.17.6:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore
100.12.7:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 65mm diameter nominal bore.
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
OD204031/2022-2023:Providing 15mm (1/2 inch) house connection with 15mm water meter from existing PVC / HDPE mains up to 110 mm dia., up to a length of 5m using 15 mm ASTM 80 pipe or later edition and ASTM / GM / Brass specials viz. brass ferrule, brass hexagonal nipple, GM full way wheel valve, bend, MTA, FTA, couplers, PVC Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers.
OD204032/2022-2023:Providing additional length of house connection pipe using 15 mm ASTM 80 or later edition and specials and testing the joints etc., by trenching and refilling in all kinds of soil with trench of average cross section 0.3m x 0.75m for laying of connection pipe and service pipe, lighting, watching, providing caution boards, traffic control etc., including cost of materials, hire for tools, cost of consumables and labour charges etc. complete, but excluding the cost of cutting of concrete / tarred / bituminous roads etc., and as per the directions of the department officers.
100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes.
Cost of materials.
100.98.222:Supply of PVC Pipe, 8kg/cm2, 75mm Dia.
100.98.223:Supply of PVC Pipe, 8kg/cm2, 90mm Dia.
OD204099/2022-2023:supply of 75 mm 8kg/ cm2 PVC specials -3%
OD204100/2022-2023:Supply of 65 mm GI pipe (m)
OD41421/2023-2024:supply of 65 mm gi specials-
OD41424/2023-2024:Supply of PVC specials 8kg/cm2, 90mm Dia.
Construction of Tank
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
2.7.1:Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars
13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
13.45.1:Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
OD204153/2022-2023:supplying 10000 ltrs capacity HDPE pipe
OD204155/2022-2023:Engaging labour for conveying erecting leveling 10000 Ltrs HDPE Tank over the tank support already constructed, in correct alignment and connecting with the existing pumping main and distribution line and make it ready for water supply as per the direction of departmental officers
10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Supplying and erecting motor pump set
OD204216/2022-2023:Supplying and erecting submersiblle bore well motor pump set of 141 lpm(2.34 LPS) having a total head of 55 m including 10 m suction and delivery pipes( total 20m), starter including dry run preventer, sluice valve,NRV, Pressure gauge,etc and 2 years maintanance
Inauguration Stone Board
OD204228/2022-2023:Inauguration stone board in Marble including material cost, laying charge, writing charge etd to complete
supply and erection of pressure filter
OD204397/2022-2023:Designing,manufacturing,installing as per the technical demandnand site condition,trial running and commissioning of one number pressure sand filter(PSF)pressure vessel with diameter 2000mm and HOS 2000mm(Height on Straight)and shell thickness 10mm and Dish end thickness 12mm adequate to withstand possible maximum internal pressure of 10kg/cm2<br>The container should have a manhole with cover at top fo easy inspection of the unit provision of door/dummy at bottom for media removal. The unit should be capable of discharging filtered water at the rate of 900 LPM against a total head of 100meter excluding loss of head caused by the the filter unit ,through existing pumping main, The unit should be incorporated with best quality 5 C1 Butterfly valves having ISI mark for filter unit functioning including rinsing and back washing. The outlet of the pressure sand filter shall be connected with the pumping main. The scope of work includes all related civil work likes solid staging, mechanical and plumping works and inter connection of the system at inlet and outlet with existing pumping main by pass arrangement,suitable weather protection arrangements with MS Fabrication and trafford sheets as per specification etc. using suitable pipe materials. All the metallic parts should be so installed at suitable point that the operation and maintenance is easy. The filter should have good performance life for a minimum period of 2 years, The supporting unde bed materials hall be graded pebbles/crushed gravel etc.The whole installed system will be under guarantee for 2 years from the date
Abdusamad P
setelia llp
Bidder Name
Abdusamad P
KUNHIMOHAMMED K
setelia llp
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .