Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.7 LAccepted-AOC | ₹21.7 L | L1 | Accepted-AOC L1 |
| 2 | L₹22.6 LRejected-Finance | ₹22.6 L | L | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | LAIJU.P.VARGHESE L1 | Ashok Kumar.K.R L2 |
|---|---|---|---|---|---|
| 1.0025 HP CF PUMP SET(Veerappan colony -Chakkippara) | |||||
| 1.00 | OD310850/2023-2024:Supply, erection, testing and commissioning of KWA prequalified reputed make Centrifugal pump set (Multistage or DSM type only) with SS impeller, SS shaft and CI pump casing with suitable type base plate with coupling ,foundation bolt and nuts etc. complete and including providing suitable concrete foundation .The duty condition is as follows (Discharge- 27.5m3/hr ,Total head- 138M 2. Motor - Supply, erection, testing and commissioning of KWA Prequalified reputed make horizontal solid shaft foot mounted TEFC squirrel cage induction 4 pole motor with RPM less than 1550. The motor shall confirm to IE2/IE3 as per IS 12615-2018 including providing suitable concrete foundation etc. . Flexible coupling shall be used for coupling the pump and motor 3. Starter - Supply erection, testing and commissioning of suitable rating ( push button based ) starter for the above motor with over voltage and under voltage protection , single phase preventer , over load relay with motor protection relay complete as per the direction of dept officers 4. Panel board ( suitable for operating two pump sets bunt one pump set at a time ) - Supply, erection and commissioning of cubic type MS fabricated dust and vermin proof common control panel board consisting of 1 no. suitable capacity MCCB as incomer and 2 no's of suitable capacity MCCB as out going , providing suitable size Aluminum bus bar , 3 no's of indicator lamps , 1 no Volt meter with selector switch , Ammeter with selector switch etc. complete the panel shall be fitted on a common base frame on suitable foundation. 5. Cabling work-Supply, laying ,testing and commissioning of suitable size XLPE aluminium cable for the above pump set from panel board to starter and XLPE copper cables from starter to motor. 6. Earthing - Supply of all materials and providing suitable earthing by using suitable size pipe plate earthing GI/copper strip buried in ground and giving double earthing to motor , starter, panel board etc. as per IE standard 7. Capacitor- Supply ,erection testing and commissioning duty APP capacitor for the motor get a power factor above 0.97 with duty contactor . The capacitor shall confirm to IS 2834. 8. Valves- Supply of suitable size best quality heavy duty ISI marked double flanged sluice and Non return valves both with pressure rating PN 1.6. Fitting of valves shall include proper RCC support especially for Non return valve. 9. Suction and delivery pipe connections-Supply and fitting of suitable size best quality GI/MS pipe of thickness not less than 8mm for a total length of 10 meter suitable for the above pump set and suitable size foot valve and connecting the suction pipe and valves with suitable flanges, nut & bolts, IR sheet etc. complete and connecting the delivery side of the pump with valves and suitable specials to connect with the pumping main. 10.Maintenance for a period of two years. 11. pressure gauge- Glycerin filled - 2.5" min size. | 1 | no | 10,50,000 ₹10,50,000 Lowest | 11,01,153 ₹11,01,153 |
| 1.00 | OD102414/2024-2025:Supply erection commiosing of vaccum pump 3 HP, 3 phase with upto 45m3/hr flow (range 5-45m3/hr), vaccum upto 600mm of Hg( range 100-600), class B insulation, Protection IP44, DOL starter, CPVC, GI fittings for suction and connection to existing delivery lines of Pumpset using GM vavles
Supply, erection, testing and commissioning of 3 HP Vacuum pump set with the following
specification.1-Pump and Motor-Supply, erection, testing and commissioning of KWA prequalified reputed make vacuum pump with motor and all accessories. Providing suitable
concrete foundation as per the direction of departmental officers. 2- Starter-Supply, erection,
testing and commissioning of 400/440 V suitable rating fully automatic DOL Starter with
Thermal Over load relay as per IE rules. 3- Cabling work - Supply, laying, testing and
commissioning of suitable size Copper Cables and end termination lugs of required size and
gauge suitable for above motor as per IE rules. 4-EARTHING -Earthing the motor, panel, starter,
capacitor and as per the direction of departmental officers. 5-Suction and delivery pipe
connections - Connecting the Vacuum pump pipe connections to the existing delivery lines of pump
sets GM ball valves, pipes and specials. 6-Vaccum Pressure Gauge -Supply
and fixing of Reputed make Glycerin filled vacuum pressure gauge with Steel Ball type valve
and all accessories suitable for the (Vacuum pump set). 7 -Foundation -Constructing Foundation
for pump set with M:20 mix NSBS of suitable size and reinforcement torsteel in mesh in all
directions and fixing foundation bolt to suitable base of the pumpsets as directed by the
department officers. | 1 | each | 1,10,800 ₹1,10,800 Lowest | 1,14,692 ₹1,14,692 |
| 1.00 | OD102422/2024-2025:Supply erection and commissioning of wall mounted Gravity Feed Chlorinator of capacity 0 to 3 kg/hr with primary chlorine gas filter of special grade rigid PVC with flanged connection inside Teflon bushes and Diaphragm type chlorine glycerine filled pressure gauge, Diaphragm type Dosage control valve of special grade rigid PVC with flanged connection inside Teflon bushes, Borosilicate glass Rotameter with Teflon float and with minimum flow indication of 200 units, Borosilicate glass mixing chamber with special grade rigid PVC square plates for necessary protection, and glass non return valve, water inlet with filter, copper tube from chlorine cylinder to chlorinator with Hast Alloy ‘C’ connection in both ends, chlorine solution out let connection suitable for feeding chlorine into the sump, including conveyance loading, unloading etc. complete.<br> | 2 | no | 2,29,000 ₹4,58,000 Lowest | 2,37,294 ₹4,74,588 |
| 1.00 | OD103258/2024-2025:Charges for the supply fabrication and installation of starter panel of 16mm thick duly powder coated and treated suitable for starter power contacts and additional measuring and protection instruments such as incomer SFU, dry run protection,Electronic Digital metering with line voltage, 3 nos line current and frequency, motor protection relay, additional length copper wire from starter to motor and Al cable from main panel to starter etc | 2 | no | 1,17,000 ₹2,34,000 Lowest | 1,21,313 ₹2,42,626 |
| 1.00 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 6,000 | Litre | 13.2 ₹79,200 Lowest | 13.8 ₹82,800 |
| 1.01 | 50.18.8.8.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2 | 90 | metre | 770 ₹69,300 Lowest | 798 ₹71,820 |
| 1.01 | OD105250/2024-2025:Providing and fixing ceiling fan ( RPM less than 500) with necessary fittings, with electronic regulators, with insulated copper conductor single core wire in surface/ recessed plastic/fibre conduit with piano switch, phenolic laminated sheet, suitable MS box | 3 | set | 4,200 ₹12,600 Lowest | 4,368 ₹13,104 |
| 1.01 | OD105251/2024-2025:Supply of materials & Wiring for light point with insulated copper conductor single core cable in surface/ recessed steel conduit with piano switch, phenolic laminated sheet, suitable MS box and LED bulb etc complete as per direction of departmental officer | 8 | set | 4,200 ₹33,600 Lowest | 4,370 ₹34,960 |
| 1.01 | 10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces | 7.05 | sqm | 6,500 ₹45,844.5 Lowest | 6,805 ₹47,995.67 |
Tender Value
₹20.0 L
EMD Value
₹49,986
Closing Date
30 Jan 2026, 3:00 pmClosed
ExecutiveEngineer
ExecutiveEngineer PH Division Muvattupuzha
State Plan 202425 Optimization of Production and Transmission Additional motor and pumpset in Manjalloor plant Supply erection amp commissioning of 25HP CF to Chakkippara Veerappan colony General Civil Work
2026_KWA_829430_1
39/2025-26/EE/PHDN/MVPA
Open Tender
Civil Works - Water Works
Item Rate
180 days
Manjalloor Panchayath
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
₹49,986
11 Jun 2026
22 Jan 2026
31 Jan 2026
22 Jan 2026
30 Jan 2026
22 Jan 2026
25 HP CF PUMP SET(Veerappan colony -Chakkippara)
OD102414/2024-2025:Supply erection commiosing of vaccum pump 3 HP, 3 phase with upto 45m3/hr flow (range 5-45m3/hr), vaccum upto 600mm of Hg( range 100-600), class B insulation, Protection IP44, DOL starter, CPVC, GI fittings for suction and connection to existing delivery lines of Pumpset using GM vavles Supply, erection, testing and commissioning of 3 HP Vacuum pump set with the following specification.1-Pump and Motor-Supply, erection, testing and commissioning of KWA prequalified reputed make vacuum pump with motor and all accessories. Providing suitable concrete foundation as per the direction of departmental officers. 2- Starter-Supply, erection, testing and commissioning of 400/440 V suitable rating fully automatic DOL Starter with Thermal Over load relay as per IE rules. 3- Cabling work - Supply, laying, testing and commissioning of suitable size Copper Cables and end termination lugs of required size and gauge suitable for above motor as per IE rules. 4-EARTHING -Earthing the motor, panel, starter, capacitor and as per the direction of departmental officers. 5-Suction and delivery pipe connections - Connecting the Vacuum pump pipe connections to the existing delivery lines of pump sets GM ball valves, pipes and specials. 6-Vaccum Pressure Gauge -Supply and fixing of Reputed make Glycerin filled vacuum pressure gauge with Steel Ball type valve and all accessories suitable for the (Vacuum pump set). 7 -Foundation -Constructing Foundation for pump set with M:20 mix NSBS of suitable size and reinforcement torsteel in mesh in all directions and fixing foundation bolt to suitable base of the pumpsets as directed by the department officers.
OD102422/2024-2025:Supply erection and commissioning of wall mounted Gravity Feed Chlorinator of capacity 0 to 3 kg/hr with primary chlorine gas filter of special grade rigid PVC with flanged connection inside Teflon bushes and Diaphragm type chlorine glycerine filled pressure gauge, Diaphragm type Dosage control valve of special grade rigid PVC with flanged connection inside Teflon bushes, Borosilicate glass Rotameter with Teflon float and with minimum flow indication of 200 units, Borosilicate glass mixing chamber with special grade rigid PVC square plates for necessary protection, and glass non return valve, water inlet with filter, copper tube from chlorine cylinder to chlorinator with Hast Alloy ‘C’ connection in both ends, chlorine solution out let connection suitable for feeding chlorine into the sump, including conveyance loading, unloading etc. complete.<br>
OD103258/2024-2025:Charges for the supply fabrication and installation of starter panel of 16mm thick duly powder coated and treated suitable for starter power contacts and additional measuring and protection instruments such as incomer SFU, dry run protection,Electronic Digital metering with line voltage, 3 nos line current and frequency, motor protection relay, additional length copper wire from starter to motor and Al cable from main panel to starter etc
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
50.18.8.8.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2
OD105250/2024-2025:Providing and fixing ceiling fan ( RPM less than 500) with necessary fittings, with electronic regulators, with insulated copper conductor single core wire in surface/ recessed plastic/fibre conduit with piano switch, phenolic laminated sheet, suitable MS box
OD105251/2024-2025:Supply of materials & Wiring for light point with insulated copper conductor single core cable in surface/ recessed steel conduit with piano switch, phenolic laminated sheet, suitable MS box and LED bulb etc complete as per direction of departmental officer
10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
OD109319/2024-2025:Supply & installation of computer for PH Section office for centralized supervision of automation units with SSD hard disk ( min 250 GB capacity) with , i 5 latest processor, LED screen of 20-22", keyboard (wireless), mouse (wireless); with power cables and Processing unit, with HDMI support, 4GB or more RAM- all items with 1 year warranty as per the direction of dept officers
OD171798/2025-2026:Supply of 400A or higher AC/DC digital Clamp type multi Meter of reputed make including lead and probe, Slim Jaw And Light Design with Backlight, Measures AC/DC Current, Voltage rating 500 V-1000V, Frequency, Resistance, Capacitance, Diodes, Continuity etc complete as per the direction of departmental officer
OD172056/2025-2026:Supply of minimum 500V capacity crank type megger meter of good quality from reputed firm as per the direction of departmental officer
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1392923.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
KWAGeneralConditionsforeTenderingV5.pdf
PDF • 0.69 MB
Tendernotice_1.pdf
PDF • 0.11 MB
BOQ_1392923.xls
BOQ • 0.31 MB
Circularsorders.pdf
Other Document • 13.07 MB
NIT.pdf
Tender Documents • 1.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].