Construction of Mini Sectt /Combined Office building at Jawalamukhi Distt Kangra HP Construction of Canteen Lighting Shed and Conference Hall SH Providing E I therein

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C. Makes:- Legrand(Myrius),Schiender(Livia),Anchor Roma(Plus),L&T(Entice).

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.

Group C. Makes:- Legrand(Myrius),Schiender(Livia),Anchor Roma(Plus),L&T(Entice).

Wiring for Twin Control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with 2 Way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group C. Makes:- Legrand(Myrius),Schiender(Livia),Anchor Roma(Plus),L&T(Entice).

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required

2X1.5Sq.mm+1X1.5Sq.mm Earth wire

2X2.5Sq.mm+1X2.5Sq.mm Earth wire

2X4 Sq.mm+1X4 Sq.mm Earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Makes: Finolex/L&T/Anchor.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3X1.5 Sq.mm

3X2.5Sq.mm

3X4Sq.mm

3X6Sq.mm

6X10Sqmm

Makes: Finolex/L&T/Anchor.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

5/6 amp Modular switch

5/6 amp Modular socket

Makes:- Legrand(Myrius),Schiender(Livia),Anchor Roma(Plus),L&T(Entice).

Supplying and fixing Computer board comprising 3 nos 5 amp modular switches & Sockets and G.I Box 12 module for 5 amp switchs and 5 amp sockets comprising frame and cover plate for each 2 module and 12 module metal box including connections etc as required.

Makes: Legrand(Myrius),Schiender(Livia),Anchor Roma(Plus)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Makes: Legrand(Myrius),Schiender(Livia),Anchor Roma(Plus)

Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Makes: Legrand(Myrius),Schiender(Livia),Anchor Roma(Plus)

Supplying and fixing extra down rod of 60cm length G.I. pipe 15mm dia heavy gauge including painting etc. as required.(Note:-More than 5cm length shall be rounded to the nearest 10cm and 5cm or less shall be ignored.) Makes:-Jindal Hissar,Tata.

Supplying and fixing Ding dong bell suitable for single phase, 230 volts, complete as required.

Makes: Anchor/Goldmedal.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Makes:- Legrand,Schiender,L&T.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Makes:- Legrand,Schiender,L&T.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Makes: Legrand,Schiender,L&T.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required.(But without MCB/RCCB/Isolator).

Makes: Legrand,Schiender,L&T.

Double door-12way

Double door-16 way

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Providing & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Makes: Finolex/L&T/Plaza/Polycab.

Armoured cable 35 sq. mm (3.5 core)

Providing, Installation, testing and commissioning of wall fan of following size by means of suitable rag-bolt/ nuts, connections, testing and commissioning etc. as required complete in all respects to the best satisfaction of Engineer-in-charge .

Wall Fan 400 mm sweep

Make: Usha/Bajaj/Anchor.

Providing and installation exhaust fan of following sizes in the existing opening,including making the hole to suit the size of the above fan, making good thedamages, connections, testing and commissioning etc. as required: (With 5 Years Warranty).

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Exhaust Fan, Light duty, (Domestic) 300 mm sweep ,Make: Usha, Model: Aeroclean LD)/Bajaj/Anchor.

Providing and installation exhaust fan of following sizes in the existing opening,including making the hole to suit the size of the above fan, making good thedamages, connections, testing and commissioning etc. as required: (With 5 Years Warranty).

Exhaust Fan, Heavy duty, 300 mm sweep

Make:Usha,Bajaj,Anchor.

Supplying and fixing of LED Batton/LED Mirror Light 5 WAtts, 6500K ,(Five YEAR WARRANTY ) and it should be compatible with specification e.i. Power Factor > .9,Harmonic Distortion<10% and efficacy >100 Lumens per watt, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc as required of Approved Makes.(Including 5Years Warranty).

LED Mirror Light 5 Watts

Makes:Wipro,Bajaj & Panasonic,Philips.

Providing, Installation, testing and commissioning of BLDC ceiling fan (5 star rating), including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:

Ceiling Fan 1200 mm sweep, Category-A

Make:- Usha BLDC 5 Star,Bajaj,Crompton.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.

Ceiling Fan 1200 mm sweep, Category-A

Make:- Usha Technix,Bajaj,Crompton.

Providing and Fixing of IP20 LED Surface mounted CRCA Powder Coated Box Type Channel with Pro LED Lamp Suitable for mounting 1 X 18 W LED Tube T8 type having minimum system efficacy of greater than 100 lm/W, P.F.>0.95 with THD<10% ,CCT 6500 K,CRI 80,Surge Protection 2 Kv.The LED with Useful life of 50000 Hrs at L70 . The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. (With 5 Years Warranty).

LED Tube Light 18/20 Watts

Makes: Bajaj , Wipro & Panasonic,Philips.

Providing and Fixing of IP20 LED fixture of 18 watt +/- 1 W LED SurfaceRecess Mounted Downlighter Round Shape with minimum system lumen efficacy of 100 lm/W with Polycarbonate housing,pressure die cast heat sink and P.F.>0.95 with THD<10% ,CRI 80.The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70 . The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects.

Surface/Recess mounted Square/Round downlighter 18/20 Watts

Makes-Bajaj /Panasonic/Wipro/Philips.

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type L.T. Panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 14G/16G CRCA sheet, base frame75X40X3MM angle duly painted with Siemens Grey Powder Coated paint, Assembly Charges of 100A 4 Strip Copper Busbar ( Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.0 Amp.) Copper shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. Approximate Size of Panel H- 700mmX W-500mmX D-200mm. The Assembly Charges of 100 Amps 4P Copper solid/ Copper flexible wire interconnection Busbar to MCCB & MCCB/MCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(EVAPower system & control or approved equivalent make).

MATERIAL:

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc.

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type L.T. Panel cum metering Panel. The Assembly charges of cubical type, indoor type,single door,Floor mounted, fixed type, free standing single front, dust proof &compartmentalized 6Way Meter Panel made out of M.S. CRC Sheet 16G/18G,Base Frame 40 X 40 X 5mm duly painted with Siemens Grey Powder Coated Paint as per specification Approximate Size (H)1850MM X (W)1300MM X (D)300MM X (L)150MM,assembly Charges of 150A 4Strip Copper Busbar (Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black,Assembly Charges of Copper solid/ Copper flexible wire 10mm interconnection Busbar to MCCB,./MCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(EVAPower system & control or approved equivalent make).

MATERIAL:

MAIN INCOMER: MCCB-125A 4P 25 kA TMR with O/L & S/C Protecrtion-1 No., Spreader Link 125 A 4P-1Nos., Phase indicating Lamp-3 Nos, Control SP MCB -3Nos.

Outgoing: Space for S/Phase KWH Meter-12 No.,MCB 63A DP 10KA -12Nos.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc.

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type L.T. Panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 14G/16G CRCA sheet, base frame40X40X5MM angle duly painted with Siemens Grey Powder Coated paint as per specification Approx size (H)600mm,(W)1050mmX(D)300mmX(L)150mm, Assembly Charges of 125A 4 Strip Copper Busbar ( Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.0 Amp.) Copper shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black, assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB & MCCB/MCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(EVAPower system & control or approved equivalent make).

MATERIAL:

MAIN INCOMER: MCCB-125A 4P 25 kA TMR with O/L & S/C Protecrtion-1 No., Spreader Link 125 A 4P-1Nos., Phase indicating Lamp-3 Nos, Control SP MCB -3Nos.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc.

Supplying and fixing of bulk head fitting LED 10 watt+/-1W with minimum system Lumen efficiencyof greater than 100lm/W with and P.F.0.95 with THD,10%,CCT 5700K,CRI 70,Surge protection 4KV. The LED with useful life of 50000 Hrs. at L70. The input voltage range shall be 150V to 270V complete with all accessories, connections, testing & commissioning etc.as required. (With 5 Years Warranty).

LED 10 Watt Bulk Head

Makes: Bajaj ,Panasonic ,wipro,Philips.

Supplying and fixing of LED Street light Luminaire comprises of Al Die cast Housing with frame , High Purity PC lens Diffuser,cradle mounting, minimum system lumens of 5000. The luminaire shall have CCT of 5700K and CRI of minimum 80, PF>0.95 and THD>10%. The luminaire shall have IP66 and IK08 protection. The LED shall be compliant with Useful L70 life of 50000 Hrs. Driver efficiency should be 85% to operate in input voltage range of 100V to 270V (nominal rated voltage – 240V) with 4 KV internal surge protection and 10KV external surge protection. (With 5 Years Warranty).

LED Street Light Luminaire 36 Watts.

Makes- Wipro/Baja/Panasonic,Philips.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular socket outlet and 25 amps modular SP MCB "C" curve including connection,painting etc. as required.

Makes: Legrand,Schiender,L&T.