Completion and finishing of Incomplete Building at High School Sopat

Earth work in excavation by manual/ mechanical means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including dressing of sides and bottom, disposal of surplus excavated material as directed by Engineer-in-charge including all leads lifts and dewatering if any during execution of all operations of work complete (All kinds of soil)

Providing and laying hand packed stone soling in foundation, under floors etc, incl. ramming, watering and consolidation complete, cost and carriage of all matereials involved upto site of work complete

Providing and Laying of Cast-in-situ cement concrete (1:cement: 4 Coarse sand: 8 graded stone agrregate 40 mm nominal size ) upto plinth level, including all carriages of all materials and curing but excluding cost of form work.

Providing and laying in position specified grade of reinforcement cement concrete including curing but excluding the cost of centering shuttering finishing and reinforcement. All works upto the level of plinth 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded aggregates 20 mm nominal size crushed)

Centering and shuttering including struttimg propping etc and removal of form work for foundation footing bases of column

Centering and shuttering including struttimg propping etc and removal of form work for suspended floors roofs landings balconcies and acess platforms

Brick work with FPS brick of class designation 75mm in foundation and plinth in cement motar 1:6 (1 cement: 6 coarse sand) including extra over brick work in superstructure above plinth level upto floor five level

6 mm cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand)

12 mm cement plaster 1:6 (1 cement: 6 fine sand )

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing and applying white cement based putty of 2mm thick of approved brand and manufacturer over the platered wall surface to prepare the surface even and smooth complete

Finsihing walls with acrylic smooth exterior paint of required shade on new work (Two or more coats applied @ 1.67 l/10sqm and incl priming coat of exrerior primee applied @ 2.20 kg/10Sqm

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Steel reinforcement for RCC work straightning cutting bending placing inn position and bending all complete upro plinth level TMT bars of Grade 500D or more

Providing and fixing wood work in frames of doors, windows and other frames, wrought framed and fixed in position (including cost of all materials, leads lifts and carriages etc upto site of work complete (Imported wood)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 kg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Imported Wood (35mm thick)

Providing & fixing of 4 mm thick float glass in fixed panes with budloo wooden beading of required width fixed with nails complete (glass panes to be measured in fitted and finished form)

Applying priming coat on new wood and wood based surface with ready mixed wood primer ( including cost of all materials, leads lifts and carriages etc upto site of work complete)

Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with two or more coats on new wood and based surface

Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to framewith 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement: 3 coarse sand : 6graded stone aggregate 20 mm nominal size)

Providing/fixing of door, window stard wire fitting

A) T Bolts

Handle

C) L drops

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S wire gauge of average width for aperture 1.4 mm with wire of dia 0.63 mm for doors, windows and clerstory windows including ISI marked black enameled M.S butt hinges with necessary screws (ist class kail wood)

Providing and fixing of ceramic anti skid floor tiles of thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in colors, shades in skirting, risers, and dados over 12 mm thick bed of cemenet mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm incl pointing in white cement incl carriages complete job

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Carriage of materilas by Mechanical transportation from source to site work

Stone aggregates from an average lead of 10km

Sand from an average load of 15km

Bricks from an average lead of 15 km

Constructing masonry chamber 60x60x100 cm inside with 75 class bricks in 1:4 cement mortar with hinged cover fixed in cement concrete slab in 1:2:4 mix including excavation, foundation concrete 1:4:8 and inside 12 mm plastering in cement mortar 1:3 with a floating coat of neat cement with SFRC covers complete job

Sanitary and Plumbing

100mm Dia PVC pipe

75mm Dia PVC pipe

100mm PVC Collar

75mm PVC Collar

100 mm PVC Elbow

100 mm PVC TEE

100mm PVC Door TEE

100mmx75mm PVC Reducer Socket

75mm PVC collar

75mm PVC Tee

75mm PVC elbow

75mm PVC cowl

Floor Trap

Providing and fixing 3 layers PP-R (Poly Propylene Random Copolymer) pipes conforming to IS 15801 UV stablized and anti microbial fusion welded having thermal stablity for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings this includdes testing of joints complte as per the direction of engineer in charge PN-16 pipe 20mm OD (SDDR-7.4)

Providing and fixing 3 layers PP-R (Poly Propylene Random Copolymer) pipes conforming to IS 15801 UV stablized and anti microbial fusion welded having thermal stablity for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings this includdes testing of joints complte as per the direction of engineer in charge PN-16 pipe 32mm OD (SDDR-7.4)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement & making necesssary holes for inlet outlet & overflow pipes (triple layer)

Providing and fixing water closet sqatting pan indian type WC pan with 100mm sand cast iron P or S trap. 10 litres low level white PVC flusing cisterian including flush pipe of approved make with manually controlled device handle/level conforming IS 7231 with all fitting and fixtures complte including cutting and making good the walls and floors wherever required white vitreous china orissa pattern WC pan of size 580x44o mm with intergral type foot rests

Providing and fixing 15mm nominal borre C.P brass long nose bib cock of approved quality conforming to IS standard & weighing not less than 810g

Providing and fixing 15mm nominal borre C.Pangle valve of approved quality conforming to IS standard & weighing not less than 810g

Providing & fixing PTMT soap dish holder having length of 138 mm breadth 102 mm height 75 mm with concealed fitting arrangements weighing not less than 106gms

Providng and fixing PTMT tower rinf trapezodial shape 125 mm long 200mm wide with a minimum distance of 37mm from wall face with concealed fitting arragements of approved quality & colour weighing not less than 88 gms

Providing and fixing 600X450 mm beveled edge mirror of superior glass of approved quality complte with 6mm thick hard board ground fixed the wooden cleats with C.P brass screw & washer complete

Provind and laying of precast cement concrete ring mm dia in soak pit including cost of trenchinh and refilling prcast cement concrete cap

Supply and filling stone boulders under floors including watering, ramming and consolidating with hand rammer with aggregate size not exceeding 90 mm including cost and carriage of all materials involved upto site of work complete.