WBMAD/NDITA/16/2022-23/SL-3

Amount

Supply & Fixing of Traffic Kiosk (as per attached design), all as per direction of the E.I.C. & including of GST & other taxes & transportation etc.; as per follows:- Concrete Foundation Work:- Minimum 300mm × 300mm × 300 mm RCC work (1:1.5:3) for foundation (over the G.L.) (the upper surface must be at same level) & underground column base reinforcement foundation below G.L. 600mm × 600mm × 600mm with suitable tor rod etc. & neat cementing of the exposed foundation over ground Main structural work:- i) Base Pedestal Work:- by 200mm 304/316 SS round bar, 8 nos. each length 300mm, will be cut for fixing at 90 degree angle with surface ii) Frame Work:- A) At base- by MS Chequered Plate (5mm)- 2000mm X 2000mm (two side will be semi-circular) placed on transversely fitted TMT bar (45mm dia.)- riveted with base pedestal after making hole of bore 225mm at pedestal B) At side wall – a) Structure will be made by 2 no. rectangular (150mmx100mmx 10mm) SS heavy section will be welded with other at bottom side by side, by 1 no. rectangular (100mmx50mmx 4mm) SS heavy section will be welded with side pipe at above 1000mm from bottom, by 4 no. rectangular (70mmx50mmx 2.5mm) SS heavy section each will be welded with other & side pipe at above 2500mm from bottom & at the gap of 700mm & the between each 700mm will be made of 2mm thick ACP sheet and 3000mm long 8 nos. rectangular (100mmx60mmx 5mm) SS heavy section - symmetrically fitted with the bottom at 90 degree angle to adhere shape of the structure at image b) Covering will be made by 4mm thick ACP sheet at bottom to 1000mm at height & by 4mm thick transparent polycarbonate sheet from the height of 1000mm to 2500mm C) At door & window work- a) one no. 1000mm wide entry door will be made of 4mm thick ACP sheet at bottom to 1000mm at height & by 4mm thick transparent polycarbonate sheet from the height of 1000mm to 2500mm along with necessary framing & locking system at in-out both side b) 3 nos. 1000mm wide window will be made of 4mm thick transparent polycarbonate sheet from the height of 1000mm to 2500mm along with necessary framing & locking system at inside & will be opened at outside by hydraulic system D) Roof Work:- by 6mm thick Multiwall Polycarbonate sheet of 2000mm X 2000mm (two side will be semi-circular) over 6mm thick ACP sheet of 2000mm X 2000mm (two side will be semi-circular) under transversely fitted TMT bar (10mm dia.)- riveted/welded with SS section E) Ancillary work:- a) S/F of a 150Wp solar panel along with 60Ah battery & 20Amp. C.C.U. system including necessary structure and wiring for illumination of a 12W LED tube & a fan for 24 hrs. & a LED logo including its necessary connections etc. all complete b) S/F of 3 nos. back rest Stainless Steel chair having sitting area 450mm X 450mm c) S/F of LED logo N.B. :- 1) All colour of material & design of Logo will be as per direction of E.I.C. 2) SS section (304) used for structure may be used for rain water pipe line & electrical wiring conduit and 3) All welding will be as per specification 4) all above “Bottom” means the base above pedestal

DURABLE ENTERPRISE

D.C.Eng.Co

M. P. CONSTRUCTION

bristiconstruction

ANJALI ELECTRICAL AGENCY