CONSTRUCTION OF FIRE STATION AT VARIOUS PLACE IN KHORAJ, AMIYAPUR AND VAVOL FOR GMC AT GANDHINAGAR.

Name of Work :- Construction of Fire Station At Various Place in Khoraj, Sughad and Vavol For Gmc At Gandhinagar.

Item Item Description

No. Unit Total Qty Rate in Figure Rate in Words Total Amount

No. Unit Total Qty Rate in Figure Rate in Words Total Amount

Earthwork in cuting in all sorts of soil and soft murrum including

conveying and spreading the stuff, embankment as and where

Ninety Three Rupees

1 directed within 200meters from the end of the cutting with all C.M. 5281.00 93.88

and Eighty Eight Paise

required lead and lift.(C) Above 400 Meters upto 500 Meters.

Excavation for foundation upto 1.5m. Depth including sorting out

One Hundred Twenty

and stacking of useful materials and disposing of the excavated

2 C.M. 6435.50 123.13 Three Rupees and

stuff up to 50 mt. lead : (A) Loose Or Soft Soil

Excavation for foundation for depth from 1.5 m to 3.0 m including

One Hundred Thirty

sorting out and stacking of useful materials and disposing off the

3 C.M. 3881.00 136.30 Six Rupees and Thirty

excavated stuff upto 50 Meter lead.(A)Loose or soft soil

Excavation for foundation for depth from 3.0 m to 5.0 m

One Hundred Forty

including sorting out and stacking of useful materials and

4 C.M. 144.00 149.65 Nine Rupees and

disposing off the excavated stuff upto 50 Meter lead.(A)

Sixty Five Paise

Loose or soft soil

Boring holes 2.1 m deep in ordinary soil (for cast in situ piles) and

getting out the soil and disposal of the surplus excavated soil as Eight Hundred Thirty

directed within a lead of 50 Meter for following diameter of pipes. Seven Rupees

(iii) 250 mm : Auger

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing

Seven Hundred Fifty

6 complete excluding cost of formwork in (A) Foundation and Plinth C.M. 1360.00 3758.19

Eight Rupees and

Providing and laying cement concrete 1: 2:4 (1 cement : 2coarse

sand :4 graded stone aggregates 20 mm nominal size) and curing Three Thousand Two

complete including cost of formwork but excluding reinforcement Hundred Sixty Nine

for reinforced concrete work in: (A)Foundation footing, base of Rupees and One

columns & mass concrete. Paisa

Providing and laying controlled cement concrete work M250 and

Four Thousand Four

curing complete including the cost of form work but excluding

Hundred Eighty Five

8 reinforcement of reinforced concrete work in :(A) foundation, C.M. 233.00 4485.41

Rupees and Forty

footing, base of columns and mass concrete

Providing and laying controlled cement concrete work M250 and

Four Thousand Three

curing complete including the cost of form work but excluding

Hundred Forty Six

9 reinforcement of reinforced concrete work in : Auger C.M. 53.50 4346.88

Rupees and Eighty

Providing and laying controlled cement concrete work M250 and

Seven Thousand Two

curing complete including the cost of form work but excluding

Hundred Twenty Two

10 reinforcement of reinforced concrete work in : (B) Columns, piller C.M. 69.00 7222.12

Rupees and Twelve

posts and struts up to plinth level

Providing and laying controlled cement concrete work M250 and

Five Thousand Nine

curing complete including the cost of form work but excluding

Hundred Eighty Nine

11 reinforcement of reinforced concrete work in : (C) Beams up to C.M. 301.00 5989.30

Rupees and Thirty

Providing and laying controlled cement concrete work M200 and

Four Thousand Seven

curing complete including the cost of form work but excluding

12 reinforcement for reinforced concrete work in : Plinth slab ((C) C.M. 376.00 4787.40

Seven Rupees and

Slabs (Grade Slab) upto floor two level.)

Labour charges for giving Trimix treatment to Concrete surface

Two Hundred Sixty

including necessary steel channel formwork and required tools

13 S.M. 267.00 260.58 Rupees and Fifty

and machinery including preparing joint with concrete cutter

machine as required and directed.

Providing and laying controlled cement concrete work M200 and Five Thousand Four

curing complete including the cost of form work but excluding Hundred Seventy

reinforcement of reinforced concrete work in : (C) Coping upto Rupees and Sixteen

floor two level. Paise

Providing TMT Bar FE-500/500D reinforcement for R.C.C. work Seventy Seven

15 including bending, binding and placing in position comp. upto kg 209035.00 77.29 Rupees and Twenty

floor two level. Nine Paise

Brick work using common burnt clay building bricks having Four Thousand Two

crushing strength not less than 35 kg./Sq.Cm. in foundation and Hundred Fourteen

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Rupees and Nine

Conventional Paise

Filling available excavated earth (excluding rock) in trenches plinth,

One Hundred Thirty

sides of foundations etc. in layers not exceeding 20 cm. in depth

17 C.M. 17475.00 136.92 Six Rupees and

consolidating each deposited layer by ramming and watering)

Ninety Two Paise

Filling in foundation and plinth with murrum or selected soil in Two Hundred

layer of 20 cm thickness including watering ramming and Seventy Seven

consolidating including lead of murrum from 3 km etc complete. Rupees and Fourteen

Providing and laying 20 mm thick water proof cement plaster using

water proofing powder 1Kg/1bag of cement for all floors on brick /

concrete wall work using water proofing materials in C M 1: 4 (

19 S.M 171.00 217.15 Seventeen Rupees

cement 4 coasrse sand) including finishing with a flooting coat of

and Fifteen Paise

neat cement slurry etc complete for all floor.

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one percent is recommended One Hundred Eleven

i.e one litre 20 EC chemical emulsion with 19 liter give 1 % S.M. 2350.00 111.25 Rupees and Twenty

concrentration inclusive of one litre chemical emulsion appication Five Paise

at the rate of 5 Litre chemical / Sqm of surface is recommended as

Constructing Under Ground water tank with Providing and laying

controlled cement concrete M250 mix for R.C.C. work including

rainforcement, boxing, centering,vibrating, curing and mixed with

approved water proofing cement compound or "CEMWET" or

"PIDICRETE LW" integral water proofing admixture as water

proofing agent to be mixed with 50 kgs. bags shall be as

recommended by the manufacture of the water proofing material,

concrete work for top, bottom slab & side pardi for under ground

water tank item incl. Necessary excavation & refilling the available

earth, 15 cm thk 1:2:4 for bedding of concrete, 20 mm thk. water Eight Rupees and

21 proofing cement plaster in C.M. 1:3 with smooth finishing & Glazes lit 350000.00 8.08

tile Dedo, vata, watering etc. Comp. to all face of tank . including

locking arrengement outlet, inlet, overflow and washout outlet

pipe arrengement as necessary & C.I. Cover 0.60 x 0.45 weight not

less then 35 kg with locking arrengment. etc. comp as per

structural drawing Including Steel & as directed by Eng-in-charge.

Providing and laying controlled cement concrete work M250 and

Seven Thousand Two

curing complete including the cost of form work but excluding

22 reinforcement of reinforced concrete work UP TO FLOOR TWO C.M. 45.00 7280.08

Rupees and Eight

LEVEL : A1)COLUMN At Ground Floor Level

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding

23 reinforcement of reinforced concrete work in : (B) Columns : At All C.M. 312.00 7321.49

Twenty One Rupees

and Forty Nine Paise

Providing and laying controlled cement concrete work M250 and

Six Thousand Three

curing complete including the cost of form work but excluding

24 reinforcement of reinforced concrete work in : ( C) Beam: at C.M. 202.00 6328.66

Eight Rupees and

Ground floor slab ( up to floor two level) Ground Floor

Sixty Six Paise

Providing and laying controlled cement concrete work M250 and Nine Thousand Five

curing complete including the cost of form work but excluding Hundred Eight

reinforcement of reinforced concrete work in : ( C) Beam: at All C.M. 227.50 9508.59

Rupees and Fifty Nine

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding Six Thousand One

reinforcement of reinforced concrete work in : (D) Slab: At Ground Hundred Ninety Two

floor Rupees and Thirty

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding Nine Thousand Nine

reinforcement of reinforced concrete work in : (D) Slab: At All Floor Hundred Ninety

Seven Rupees and

Sixty One Paise

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding Six Thousand Four

28 reinforcement of reinforced concrete work in : (E) Lintels: At C.M. 46.00 6402.39 Hundred Two Rupees

Ground Floor and Thirty Nine Paise

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding Six Thousand Four

reinforcement of reinforced concrete work in : (E) Lintels: At All Hundred Eighty Four

Floor Rupees and Twenty

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding Six Thousand Seven

30 reinforcement of reinforced concrete work in : Chhajja : (F) C.M. 55.00 6007.48 Rupees and Forty

Chhajjas: At Ground Floor Eight Paise

Providing and laying controlled cement concrete work M250 and

Six Thousand Eighty

curing complete including the cost of form work but excluding

31 C.M. 120.00 6089.29 Nine Rupees and

reinforcement of reinforced concrete work in : (F) Chhajjas: At All

Twenty Nine Paise

Providing and laying controlled cement concrete work M250 and

Six Thousand Six

curing complete including the cost of form work but excluding

Hundred Fifteen

32 reinforcement of reinforced concrete work in : (G) Staircases at C.M. 24.00 6615.50

Rupees and Fifty

Ground Floor (upto floor two level.) Ground Floor

Providing and laying controlled cement concrete work M250 and Six Thousand Six

curing complete including the cost of form work but excluding Hundred Fifty Six

reinforcement of reinforced concrete work in : (G) Staircases at All Rupees and Ninety

Floor One Paise

Providing and laying controlled cement concrete work M200 and

Six Thousand Three

curing complete including the cost of form work but excluding

Hundred Ninety Six

34 reinforcement of reinforced concrete work in : Coping At All floor C.M. 38.00 6396.33

Rupees and Thirty

Providing ISI Mark TMT FE-500 bar reinforcement for R.C.C. work Seventy Seven

35 including bending and placing in position comp. upto floor two kg 38304.00 77.29 Rupees and Twenty

level : At All Floor Nine Paise

Providing ISI Mark TMT FE-500 bar reinforcement for R.C.C. work

Seventy Nine Rupees

36 including bending and placing in position comp. upto floor two kg 251512.50 79.39

and Thirty Nine Paise

level : At All Floor

Providing and laying block masonary using 230 mm thick AAC

Six Thousand Two

block [autoclaved aerated concrete block] having crushing

Hundred Sixty Three

37 strength 3-5 N/mm2 , using readymade premix tensile adhesive C.M. 297.00 6263.01

mixture etc complete as directed by Engr Incharge : (At Ground

Providing and laying block masonary using 230 mm thick AAC

block [autoclaved aerated concrete block] having crushing Six Thousand Three

38 strength 3-5 N/mm2 , using readymade premix tensile adhesive C.M. 653.00 6305.43 Hundred Five Rupees

mixture etc complete as directed by Engr Incharge : At All Floor and Forty Three Paise

Providing and laying block masonary using 100 mm thick AAC

block [autoclaved aerated concrete block] having crushing Seven Hundred Five

39 strength 3-5 N/mm2 , using readymade premix tensile adhesive S.M. 412.00 705.99 Rupees and Ninety

mixture etc complete as directed by Engr Incharge. At Ground Nine Paise

Providing and laying block masonary using 100 mm thick AAC

block [autoclaved aerated concrete block] having crushing Seven Hundred

40 strength 3-5 N/mm2 , using readymade premix tensile adhesive S.M. 397.00 712.19 Twelve Rupees and

mixture etc complete as directed by Engr Incharge : At All Floor Nineteen Paise

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (ii) Cement mortar One Hundred Sixty

1:4 (1-cement :4-sand) : (A) for wall and similar surfaces ( At S.M 3010.00 165.02 Five Rupees and Two

Ground Floor) Paise

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto One Hundred Eighty

42 floor two level and finished even and smooth in (ii) Cement mortar S.M 5196.00 189.59 Nine Rupees and Fifty

1:4 (1-cement :4-sand): (A) for wall and similar surfaces (At All Nine Paise

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and

One Hundred Forty

43 finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4- S.M 1001.00 148.00

sand) : (B) for ceilings and soffits of stairs (At Ground Floor)

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and One Hundred

44 finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4- S.M 3439.00 170.39 Seventy Rupees and

sand) : (B) for ceilings and soffits of stairs At All Floor Thirty Nine Paise

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing coat Three Hundred

45 of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of S.M 10025.00 315.69 Fifteen Rupees and

C.M. 1:1 (1-cement : 1-sand) etc. complete (All Floor) Sixty Nine Paise

Providing throating or plaster drip and moulding to R.C.C. Chajja

Forty Three Rupees

46 R.M 866.00 43.74 and Seventy Four

Providing and applying 20mm. thick cement plaster patta of c.m.

Fifteen Rupees and

47 1:3 ( 1cement : 3 sand ) etc. comp :All Floors R.M 809.00 15.15

Prov.20mm deep finished groove ..etc.comp Ten Rupees and Ten

Providing cement vata ( 10 cm x 10 cm size ) quarter round in

Twenty Four Rupees

cement mortar 1:1 including neat cement finishing, watering etc.

49 R.M 34.65 24.28 and Twenty Eight

Providing & laying "36 x 36" Vitrified 8 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 (1 cement : 6 coarse

sand) or L.M 1:1.5 laid on new surface or fixing on existing flooring One Thousand Five

by adhesive material including dismentalling of existing flooring Hundred Thirty One

and jointed with colour cement slurry including finished with Rupees and Eighty

flushpointing & cleaning the surface etc. completefor light shade : Two Paise

Providing and laying light shade vitrified tiles 8 mm to 10 mm thick One Thousand One

in skirting , risers of steps and dedo on 10 mm thick cement Hundred Fourteen

plaster 1:3 (1 Cement : 3 Coarse Sand) & jointed with white Rupees and Nine

cement Slurry : At all Floors Paise

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

One Thousand Three

new surface or fixing on existing flooring by adhesive material

Hundred Thirty One

52 including dismentaling of existing flooring and jointed with color S.M 494.00 1331.22

Rupees and Twenty

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for antiskit : At all Floors

Providing & Laying 600x600 Matt Vitrified tiles 8 to 10mm thick in

flooring over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on existing One Thousand Six

flooring by adhesive material including dismentaling of existing Hundred Seventy Five

flooring and jointed with color cement slurry including finised with Rupees and Fifty Nine

flush pointing & cleaning the surface etc. complete as per approvel Paise

& selection by architect/engineer in charge.

Providing & laying 600mm x 600mm Matt Vitrified tiles of 8 to

10mm thick in skirting,riser of steps & dedo laid on bed of 10 mm One Thousand Four

(Average) base of cement mortar 1:3 (1 Cement : 3 Coarse sand) Hundred Fifty Seven

thick & jointed with white cement slurry etc. complete as per Rupees and Forty

approvel & selection by architect/engineer in charge. Three Paise

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and One Thousand

55 jointed with grey cement slurry mixed with pigment to match the S.M 79.00 1019.39 Nineteen Rupees and

shade of slab including rubbing and polishing etc. complete. (A) Thirty Nine Paise

25mm thick : At all Floors

Providing and laying polished kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement One Thousand Two

mortar 1:3 (1- Cement : 3 coarse sand) and jointed with gray Hundred Twenty Six

cement slury mixed with pigment to match the shade of slab Rupees and Forty Six

including rubbing and polishing etc. complete : At all Floors Paise

Providing and laying Granite slab (18 mm thick) one side polished

Two Thousand Seven

flooring over 20 mm (average) base of cement mortar 1:6 (1

Hundred Forty One

57 cement : 6 coarse sand) or L.M 1:1.5 laid and jointed with grey S.M 267.00 2741.14

Rupees and Fourteen

cement slurry including rubbing and polishing complete : At all

Providing and laying polished granite stone slab 18 mm thick in

Two Thousand Nine

risers of steps, dedo and pllars laid on 10 mm thick cement mortar

Hundred Fifty Eight

58 1:3 (1 cement : 3 coarse sand) and jointed with gray cement slurry S.M 878.00 2958.29

Rupees and Twenty

including rubbing & polishing etc. Complete : At all Floors

Providing and fixing 35 mm thick solid core flush door of

approved make both side lamination using 1mm thick approved

laminate sheets with 6mm thk Lipping/border patti around flush

hutter including fixing SS hinges, 6 no. - hold fast of size

x6mm flat 300 mm long, wedges, keys, nails, catch screw, lever

latches , handle(10 cm), aldrop(20 cms), stoppers(20 cms), etc Two Thousand Three

and cutting/ drilling of necessary holes in masonry/ concrete Hundred Seventy

and grouting of holdfasts with (1:2:4) cement concrete all as per S.M 209.00 2374.51

Four Rupees and Fifty

drawing, specification and direction of the Engineer, all One Paise

materials, tools,plant and labour complete c. (All fixtures &

fittings shall be stainless steel of approved quality).approved

by architect/Engineer Incharge : At all Floors

Providing and fixing window having extruded Aluminium colour

anodized Section Frame main Outer Size 63.5mm x 38.1mm x

1.95mm( of Jindal Section No. 4605 @ Wt. of 1.094 Kg./Mt.)

Horozontal Two track member size 61.85mm x 31.75mm x

1.20mm(of Jindal Section No. 8687, @ Wt. 0.695Kg./Mt.) Vertical

Member of size 61.85mm x 31.75mm x 1.30mm (of Jindal Section

No. 8758, @ Wt. 0.659 Kg./Mt.) with sliding shutters of Horizontal One Thousand Seven

member size 40mm x 18mm x 1.29mm(of Jindal Section No. 8947 Hundred Thirteen

@ Wt. of 0.456 Kg./Mt.) Vertical Member of size 40mm x 15mm x S.M 12.00 1713.70

Rupees and Seventy

1.29mm (of Jindal Section No. 8948 @ Wt. of 0.457 Kg./Mt.) with Paise

5mm thick transparent bronze colour tinted float glass with

powder coated Aluminium fittings & fixtures & trasparent silicon

sealant glass fixing to frame as per detail etc. complete.

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24mm x 1.17mm

(of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three

track member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40mmx18mm One Thousand Five

x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical Hundred Eighty Three

member of size 40mm x 18mm x 1.29 mm (of Jindal Section S.M 314.00 1583.95

Rupees and Ninety

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze Five Paise

colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per

details etc : At all Floors

Pro.& Fixing standard extruded of alluminium section of size

63mm x 38.10mm x 1.2 mm(of jindal Section No.2434, @ Wt 0.643 One Thousand One

kg/Rmt) with colour anodized alluminium frame for Ventilation Hundred Seventy Five

with 5 mm thick frosted glass as detail etc complete for Ventilation Rupees and Fifty Six

: At all Floors Paise

Providing and fixing fully fixed stainless grill using 50mm x 8mm

(SS 304) stainless steel flats vertical 50mm X 8 mm stainless steel Four Thousand Three

lats horizontal,16 mm diameter rounnd stainess steel bar at 120 Hundred Forty Seven

mm center to center fixedto S.S.flats necessary S.S screws and Rupees and Four

other S.S fittings etc.complete. Paise

Providing and fixing M.S. grills of required pattern to

marble/granite frames of window etc. with M.s. flats at required

spacing and frames alround, square or round bars fixed with round

headed bolts and nuts or by screws, including oil painting with one One Hundred Seven

coat of primer of approved quality and brand & two coats of Rupees and Six Paise

synthetic enamal oil paint etc. complete as per detail drawing and

as directed by Engineer in charge : At all Floors

Applying two coats of Birla or Asian acrylic lapy ( putty) & two

coats of primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing the Forty Rupees and

surface free from mortar dropping and other foreign matter and Fifty Nine Paise

sand papered smooth : All floors

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from Eighty Three Rupees

mortar droppings and other foreign matter and sand papered and Eighteen Paise

smooth : (A) for wall and similar surfaces (All floors)

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

Eighty Eight Rupees

even shade including throughly brushing the surface free from

67 S.M 4440.00 88.87 and Eighty Seven

mortar droppings and other foreign matter and sand papered

smooth : (A) for wall and similar surfaces (All floors)

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after One Hundred Twenty

68 thoroughly brushing the surface to remove all dirt, and remains of S.M 11674.00 120.26 Rupees and Twenty

loose powdered materials.etc complete Six Paise

Providing & applying single coat of textured at external surface at

all floor levels with three coats of weather proof exterior emulsion

paint of approved standard brands at outer side of the building on

RCC or Masonary walls. Rate to include for all labour, materials,

staging, scaffolding, cleaing, curing etc. application of texture after

throughly brushing th`e surface to give an even shade free from Six Hundred Twenty

mortar dropping/other foreign matter etc. complete. application S.M 6807.00 624.89 Four Rupees and

of textures & paints must be as per company's standard Eighty Nine Paise

instructions. Texture and colour selection as per approved by

engineer in charge. All Type Textured

Painting two coats (including priming coat ) on new steel & other

One Hundred Twenty

metal surfaces with enamel paint brushing interior to give an even

70 S.M 33.00 128.62 Eight Rupees and

shade including cleaning the surface of all dirt , dust & other

Sixty Two Paise

foreign matter.

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of Eight Thousand Eight

red lead paint. (A)In beams and joists, channels angles Tees, flats, Quinte Hundred Thirty Seven

with connecting plates or angle cleats as in main and cross beams. l Rupees and Fifty

Hip and jack rafters, purlins conneted to common rafters and the Paise

Providing and laying and fixing 25 mm thick expansion joint by

Seven Hundred Forty

hydro cell semi rigid UV resistance with high performance

72 S.M 762.00 745.51 Five Rupees and Fifty

laminated closed cell polythene foam joint filler in sheet foam as

directed, etc. complete : All floors

Providing and fixing 25 cm Wide & 3mm thick exterior composite

One Thousand Fifty

panel on existing expansion joint horizontally & vertically with all

73 S.M 147.00 1054.34 Four Rupees and

material, hardware, acessories & fittings etc completed (All floors)

Thirty Four Paise

Providing cinder filling in sunken floors including watering,

Five Hundred Twenty

consolidating, ramming complete.

74 Cu.Mt. 81.00 522.68 Two Rupees and Sixty

Providing and fixing 150 mm wide, approved quality chicken wire

mesh at junction of brick work and RCC work or two dissimilar

surfaces, at all heights fixed by nails, rowal plugs or tag by cement Sixty Rupees and

mortar 1:3 before applying the plaster, including curing, Sixty Paise

scaffolding all complete as directed.

Providing and fixing Stainless Steel railing having 50 mm x16G ASIS

304 Grade dia hollow stainless steel pipe as hand rail and 32x32

mmx16G ASIS 304 Grade sq. hollow stainless steel pipe with

combination of 10 cm long 16 mmx16G ASIS 304 Grade dia pipe as

vertical supports 16 mm x16G ASIS 304 Grade dia hollow stainless

steel pipes as intermediate members running through stainless Five Thousand Four

steel 30 mm dia solid runners having threaded screw to fix the S.M 100.00 5405.52 Hundred Five Rupees

runner with vertical suppoet including cutting bending w=elding & and Fifty Two Paise

fabrication the structure as per drawing including finishing etc

Providing and fixing Semi unitized vision panel with glazed units

(SGU)of size as per design and consisting of 6 mm thick

(toughened)glass approved by the architect. with mullion

(101mmx57mmx1.8mm, 8.9 kg/12 rft), transum

(63mmx57mmx1.8mm, 5.8 kg/12 rft), sub frame

(54mmx22mmx1.25mm, 2.4kg/12 rft), with anodizing,with m.s.

hot deep galvanized bracket,with s.s. hardware The glazed panel

to be formed by means of imported special structural quality Six Thousand Eight

silicon adhesive sealant layer manufactured by M/s. Dow Corning Hundred Sixty One

995 USA with material:- silicone dowcorring 789weather silicone in S.M 555.00 6861.94

Rupees and Ninety

995 dow corring.It includes cost of labour, materials, accessories, Four Paise

adhesives,all required M.S FABRICATIONS, scaffolding, wastages,

transport, taxes, fixing into a neat finish in aesthetic point of view,

without any undulations in facias all complete as per drawing and

Instruction of engineer in-charge.

(Top hung or Pivoted Openable part) of size (1.15m. x 1.85m)

Providing and fixing openable hardware for glazing as per detail ,It

includes cost of labour, materials, accessories,aII required M.S Twenty Two

FABRICATlONS,adhesives, scaffolding, wastages, transport, taxes, Thousand Seven

78 fixing into a neat finish in aesthetic point of view, without any No 60.00 22775.50 Hundred Seventy Five

undulations in facias all complete as per drawing and Instruction Rupees and Fifty

of engineer in-charge. Paise

GMC LOGO - OUTSIDE

Providing and fixing of 10 mm clear Acrylic cut work and fixing

3mm acrylic on top of brand Ptglass, astari etc, including led lights

One Lac Seventy Six

with all laser and cnc work, including all material, labour, 25 mm ss

79 studs for mounting and other hardwares, waste of materials etc No 9.00 176750.00

and complete the work satisfactorily as per instruction of architect

or Engineer-in charge. (Basic size of logo is 2.5 mt X 2.5 mt)

Aluminium Composite panelling to drop-fin and front column, etc:

Supply & fixing of Aluminium Composite Panel (ACP), 3 mm thick

in required colours for interiors/exteriors consisting of two layers

of aluminium skins of 0.25 mm thick sandwiching a thermo plastic

core in continuous lamination process with PVDF coating for

interior/exterior grades ensuring long colour and no fungal

attacks. Base frame work with aluminium sections of 65mm X

25mm shall be fixed over the brick work and the above aluminium Two Thousand Three

panels shall be fixed to the frame work as cladding with material:- Hundred Ninety Eight

silicone dowcorring 789weather silicone in 995 dow corring.It Rupees and Seventy

includes cost of labour, materials, accessories, adhesives, Five Paise

scaffolding, wastages, transport, taxes, fixing into a neat finish in

aesthetic point of view, without any undulations in facias all

complete as per drawing and Instruction of engineer in-charge.

Providing & Fixing Cubicle System of MODLE TYPE - TITAN SS

SERIES of Cubicle size 1000mm (W) X 1550mm (D) X 1980mm (H)

having 12 mm thick Compact Laminate HPL Boards of Single Color

with Door Size : 1750mm (H) X 610mm (W) & Overall Height Of

Cubicle 1980mm (Including bottom Gap of 150mm) including

Accessories of Standard – Merino Make Stainless Steel - 304 Twenty Five

Grade)- SS “U” Channel, SS “F” channel, SS Top Rail, SS Coat Hook , Thousand Two

SS Privacy Thumb turn c/w Occupancy Indicator, SS Door Knob, SS Hundred Fifty

Hinges with Cover, SS Adjustable Foot - 316 Grade, Rubber Lining Rupees

for Groove, S.S.Screws 304 G & P.V.C Wall Plugs etc. complete

approved by architect/Engineer Incharge.

Providing and laying broken chine mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring Seven Hundred

82 mortar creme out upto surface using white cement including S.M 2820.00 779.70 Seventy Nine Rupees

rounding off junctions and extending them upto 15 cm along the and Seventy Paise

wall,clearing with water and oxalic acid etc. as directed.

Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of following

(a) Applying and grouting a slurry coat of neat cement using

kg/ sqm of cement admixed with proprietary water proofing

compound conforming to IS : 2645 over the R.C.C. slab including

cleaning the surface before treatment.

(b) Laying cement concrete using broken bricks\brick bats 25 mm

to 100 mm size with 50 % of cement motar 1:5 ( 1 Cement :

Coarse sand ) admixed with proper water proofing compound Seven Hundred

confirming to IS : 2645 over 20 mm thick layer of cement mortar of S.M 2905.00 700.94 Rupees and Ninety

mix 1: 5 (1 cement : 5 Coarse sand ) admixed with proprietary Four Paise

water proofing compound confirming to IS : 2645 to required

slope and treating similarly the adjoining walls upto 300 m height

including rounding of junction of walls and slabs.

(C) after two days of proper curing applying a second coat of

cement slurry admixed with proprietary water proofing

compound conforming to IS:2645

(d) finishing the surface with 20 mm thick jointless cement mortar

of mix 1:4 (1 cement : 4 coarse sand) admixed withproprietary

water proofing compound conforming to IS: 2645 and finally

finishing the surface with neat cement slurry and making of 300 x

Providing & fixing wash down water closet European type W.C.

pan with integral 'P' or 'S' trap incl jointing the trap with soil pipe

in cement motar 1:1 (1cement : 1fine sand ) having following

additional accessories : (A) vitrious china pattern- I in white One Thousand Six

colour,(a) G.I. inlet connection for flush pipe with W.C. pan,(b) Hundred Seventy Five

plastic seat & cover for wash down water closet with c.p brass Rupees and Twenty

hinges and rubbers buffers of colour match to the E.W.C.pan on Two Paise

Providing and fixing washbasin with single hole for pillar trap at all

floor level with C.I. or M.S. Brackets painted white including

cutting holes and making good the same including (A) Vitreous

china flat back wash basin 550mm x 400mm size in white colour

(a) providing and fixing C.P. brass waste for wash basin or sink(A)

32mm (b) providing and fixing M.I.fisher union for wash basin or Two Thousand Four

85 sink(A) 32mm (c) piller tap,capstan head, screw down high No 35.00 2459.06 Hundred Fifty Nine

pressurewith screw shanks and back nuts for 15mm dia. for all Rupees and Six Paise

floor (d)brass screw down stop tap (e)Rubber plug for sink or

washbasin (f) chromium plated bottle trap with necessary

coupling of approved quality for wash basin (All floor)

Providing & fixing 600 mm. x 450 mm. mirror of superior glass at

Eight Hundred Fifty

all floor levels, mounted on 6 mm. th. A.C. sheet or plywood sheet

86 No 35.00 859.41 Nine Rupees and

& fixed to wooden plugs with C.P. brass screws and washers etc.

Forty One Paise

Providing and fixing Urinal or approved quality including conecting

the Urinal with waste pipe , tap etc. complete : (A) White

87 No 30.00 1074.86 Seventy Four Rupees

earthenware flat back or corner type size 430mm x 260mm x

and Eighty Six Paise

Providing and fixing PVC SWR Nanhi trap IS 14735 for drain -100

mm diameter with jali of the following nominal diameter of self Five Hundred Ninety

88 cleaning design with C.I scead down or hinged grating including No 156.00 599.64 Nine Rupees and

the cost of cutting and making good the wall (All floor) Sixty Four Paise

Providing and fixing to wall ceilling and floor 10.0 kg/cm2 working

pressure polythelene pipes of the following outside dia. low Two Hundred Eighty

89 density complete with special flage compression type fitting, wall No 273.00 280.23 Rupees and Twenty

clips etc. including making good the wall ceilling floor : (F) 75 mm Three Paise

Providing and fixing to wall ceilling and floor 10.0 kg/cm2 working

pressure polythelene pipes of the following outside dia. low Three Hundred Thirty

90 density complete with special flage compression type fitting, wall No 290.00 339.05 Nine Rupees and Five

clips etc. including making good the wall ceilling floor (G) 110 mm Paise

Two Hundred Eighty

91 No 213.00 280.23 Rupees and Twenty

Providing and fixing S.W. Gully trap with C.I. gratting brick

One Thousand Two

masonary chamber and water tight C.I. cover with frame of

Hundred Ninety Two

92 300mm. x 300mm. size with standard weight (i) square mouth No 23.00 1292.19

Rupees and Nineteen

trap(A) 100mm x 100 mm size- P-type

Constructing brick masonary for under ground C.I. inspection

chamber and bends with bricks having crushing strength not less

than 35 kg/cm2 in c:m 1 :5 C.I. cover with frame 445mm x 610mm

internal dimension total weight of cover with frame to be not less

than 38 kg.(wt. or cover 23 kg. and wt of frame 15 kg.) R.C.C. top Two Thousand Nine

slab with 1:2:4(1 cement :2 course sand : 4 grade stone aggregate Hundred Thirty Two

20mm size) foundation concrete 1: 5: 10 inside plaster 15 mm No 84.00 2932.93

Rupees and Ninety

thick with cement mortar 1: 3 finished smooth with a floating coat Three Paise

of neat cement on walls and bed concrete etc. comp. (i) inside

dimension 455mm X 610mmX 450mm deep

Providing,& laying(to level or slopes) and joining R.C.C NP2 CLASS

pipe in C.M 1:1 of following nominal internal diameter with collars Two Hundred Fifty

94 and butt ends prepared for collar joints including testing of pipes R.M 959.63 257.19 Seven Rupees and

and joints etc. Complete : (B) 150 mm dia. Nineteen Paise

Providing and laying and jointing in tube line and level 15 mm dia

U.P.V.C. Pipe (SCH -40 ) including fitting make or equivalent as

approved by engineer In charge. Pipe shall be fixed on the wall

with the help of clamp at every two meter C/C or shall be Seventy Two Rupees

concealed as directed including necessary fitting etc. including and Sixty Five Paise

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials : (A) 15mm. dia.

Providing and laying and jointing in tube line and level 25 mm dia

U.P.V.C. Pipe (SCH -40 ) including fitting make or equivalent as

approved by engineer In charge. Pipe shall be fixed on the wall

with the help of clamp at every two meter C/C or shall be Ninety One Rupees

concealed as directed including necessary fitting etc. including and Eighty Four Paise

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials : (c) 25mm. dia.

Providing and laying and jointing in tube line and level 40 mm dia

U.P.V.C. Pipe (SCH -40 ) including fitting of PRINCE/ SUPREME/

ASTRAL/ FINOLEX make or equivalent as approved by engineer In

charge. Pipe shall be fixed on the wall with the help of clamp at One Hundred Forty

97 every two meter C/C or shall be concealed as directed including R.M 1107.00 148.12 Eight Rupees and

necessary fitting etc. including testing of pipe and joints and fixing Twelve Paise

the same with adhesive solvent, including cost of all materials : (e)

Providing and fixing C.P brass screw down bib tap at all floor level

One Hundred Eighty

polished bright etc. comp.

98 No 90.00 186.83 Six Rupees and Eighty

Providing and fixing gun metal check or non return full way wheel Six Hundred Sixty

99 valve at floor levels,etc. complete : (E) 40mm. dia. No 20.00 663.43 Three Rupees and

Forty Three Paise

Providing and fixing chromium plated brass half turn flushcock at

all floor level, of approved quality incl. fixing in pipe line etc. comp Two Hundred Sixty

100 : (ii) 25mm. dia. No 41.00 263.77 Three Rupees and

Seventy Seven Paise

Providing and fixing abonite ball cock of approved quality as One Hundred Two

101 directed etc. comp : (A) 25mm. dia. No 13.00 102.91 Rupees and Ninety

Providing and fixing 10.0 kg/cm2 working pressure polythelene

Three Hundred Thirty

pipes of the following outside dia. low density complete with

102 R.M 335.40 339.05 Nine Rupees and Five

special flage compression type fitting, wall clips etc. (B) 110 mm

Providing & fixing G.I. Rain water spout of 50 mm dia & 30 cm One Hundred One

103 length etc (all floor level) No 43.00 101.91 Rupees and Ninety

Providing and fixing in position P.V.C. cowl vent to pipes of prince, Five Hundred Five

104 suprim, jain make etc. comp :100 mm dia No 21.00 505.17 Rupees and

Seventeen Paise

Providing erecting and fixing double coated Syntex or equivalent

PVC (ISI) mark water tank of reqd capacity each with all necessary Three Rupees and

fitting and connection etc. comp on terrace. Ninety Five Paise

Supplying and planting of good quality nodes of specified grass for

dibbling: It includes the cultivation of dround to a depth of

150mm, Planting (2”-3" apart) of grass as per drawing without

Two Hundred Twenty

disturbing the desired gradient and level, watering, maintaining

106 S.M. 1725.00 224.22 Four Rupees and

(forking, mowing, weeding, fertilizer application, pest control etc.)

Twenty Two Paise

it for a period of 3 months from the date of lawn

dibbling/plantation.

Doob grass(dibbling)

Shrubs/Ground covers

Supplying and planting healthy shrubs of different species of

450mm to 900 mm height: by using the soil/ manure (either carted

or supplied), and watering it immediately. Maintaining( application

of liquid manures/ growth regulators/ pesticides as per need, Two Hundred Twenty

107 weeding and gap filling regularly so as to keep the plant healthy all No 1380.00 227.25 Seven Rupees and

the time) it for a period of 6 months from the date of plantation- Twenty Five Paise

Ixora Pink,Ixora Red, Ixora Yellow,Ixora White or as per selection of

Engg. in charge/Architect.

Supply and planting of trees (1.5m to2.0m height):

Digging a tree pits of size –0.9 mt. X0.9 mt. X1.0 mt., Supplying and

filling of tree pit with dry paddy husk up to 100mm from bottom

of the pit. providing and planting a tree sapling by using the soil/

manure (either carted or supplied ), staking/ propping it with Nine Hundred Fifty

108 bamboo stick using jute string and watering it immediately. No 123.00 959.50 Nine Rupees and Fifty

Making basin around ( 3' dia) and maintaining( application of liquid Paise

manures/ growth regulators/ pesticides as per need, weeding and

gap filling regularly so as to keep the plant healthy all the time) it

for a period of 3 months from the date of plantation.

Box cutting the road surface to proper slope & camber for making

One Hundred Nine

a base for road work including removing the excavated stuff, and

109 C.M. 2669.00 109.24 Rupees and Twenty

depositing on the road side slopes as directed up to 50 Mt. Lead

Rolling and Consolidating of soling including filling in depression

which occurs during the process with power roller 8 tonne to

Twenty Two Rupees

tonne. and compacting the bed as per specifications to core test

110 S.M. 9994.00 22.75 and Seventy Five

97% compacting complete in all respects to the entire satisfaction

of the Engineer-in -charge.

Providing and fixing pre- cast concrete kerb stone of gray cement

based concrete block 30 cm length, 30 cm height and 15cm thick

of 250 grade concret as per approved design and including

111 S.M. 1898.00 374.92 Seventy Four Rupees

excavation for fixing in proper line and level, fillig the joint with C:

and Ninety Two Paise

M 1:3 ( 1 Cement : 3 Fine Sand) etc. complete

Providing, laying, spreading and consolidation graded stone

aggregate to wet mix macadam 150mm compacted thick as per

MORT & H specifications including premixing the material with One Thousand Nine

water at OMC in mechanical plant carriage of mixed material by Hundred Eighty

tippers to site, laying in uniform layers with paver in sub base/ Rupees and Sixty One

base course on well prepared surface and compacting with Paise

vibratory roller to achieve the desired density

Providing & laying of specified compacted thickness Granular sub

base (GSB) in specified grading in table 400-1 of the specification

MORT&H and compactor to the required density with 8 - 10 tonne

vibratory roller with plain drum or heavy pneumatic tyred roller of

minimum 200 to 300 KN weight in all seasons as per MORT&H

maintaining the required slope & grade during the operation as

approved by the engineer in charge & watering to the proper One Thousand Four

Hundred Fifty Two

113 moisture content and sprinkled with the help of truck mounted C.M. 781.00 1452.38

water tank fitted with suitable arrangement .( fully saturated Rupees and Thirty

having CBR value greater or equal to 30) compacted thickness of Eight Paise

150 mm consisting of Machine crust stone aggregate as per

grading 1 in table 400-1 of the specification MORT&H fifth

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design Seven Hundred Six

114 Confirming to IS 15658 : 2006 including 35 mm Sand layer for S.M. 1838.00 706.90 Rupees and Ninety

levelling and filling the joint with sand in proper line and level as Paise

per guidlines of IRC : SP 63-2018 etc. Complete.

Dry Lean Cement Concrete Sub- base (Construction of dry lean

cement concrete Sub- base over a prepared sub-grade with coarse

and fine aggregate conforming to IS: 383, the size of coarse

aggregate not exceeding 25 mm, aggregate cement ratio not to

exceed 15:1, aggregate gradation after blending to be as per table

600- 1, cement content not to be less than 150 kg/ cum, optimum Two Thousand Two

115 moisture content to be determined during trial length C.M. 664.00 2204.60 Hundred Four Rupees

construction, concrete strength not to be less than 10 Mpa at 7 and Sixty Paise

days, mixed in a batching plant, transported to site, laid with a

paver with electronic sensor, compacting with 8-10 tonnes

vibratory roller, finishing and curing.)

Cement Concrete Pavement: Providing and Laying of un-

reinforced, dowel jointed, M40 pavement cement concrete

pavement over a prepared sub base with 53 grade cement with

coarse and fine aggregate conforming to IS 383, maximum size of

coarse aggregate not exceeding 25 mm, mixed in a batching and

mixing plant as per approved mix design, transported to site, laid Seven Thousand Two

with a fixed form or slip form paver, spread, compacted and Hundred Four Rupees

finished in a continuous operation including provision of C.M. 1327.00 7204.33

and Thirty Three

contraction, expansion, construction and longitudinal joints, joint Paise

filler, separation membrane, sealant primer, joint sealant,

debonding strip, dowel bar, tie rod, admixtures as approved,

curing Compound, finishing to lines.

Supplying of crushed stone aggregates, chippings etc. of hard

Five Hundred Forty

stone of following nominal size free of disintegrated pieces

117 C.M. 6.00 545.63 Five Rupees and Sixty

deletarious and oraganic mater and grading as per I.R.C. Code.(iii)

Supplying of crushed stone aggregates, chippings etc. of hard

Four Hundred Eighty

stone of following nominal size free of disintegrated pieces

118 C.M. 12.00 482.53 Two Rupees and Fifty

deletarious and oraganic mater and grading as per I.R.C. Code.(ii)

Spreading the stone aggregate including filling the interstices to

Two Hundred Sixty

required camber and gradient (excluding spreading of

119 C.M. 18.00 268.92 Eight Rupees and

Blindage)(iii) 25mm to 50mm size crushed stone

Ninety Two Paise

Drilling 300 mm dia pilot bore at above site in all strata by mud

Seven Hundred Fifty

flush direct rotary rig/reverse rotary rig. From 0.00 mt to 220 mt .

120 R.M. 1326.00 756.49 Six Rupees and Forty

Reaming of 300 mm dia bore hole including assembling , jointing

Two Hundred Sixty

lowering housing casing strainer pipes and gravel and assemble

121 R.M. 720.00 263.61 Three Rupees and

item with gravel packing and clay packing 500 mm dia hole for

Sixty One Paise

Reaming of 250 mm dia bore hole including assembling , jointing

Four Hundred Sixty

lowering housing casing strainer pipes and gravel and assemble

122 R.M. 606.00 465.61 Five Rupees and Sixty

item with gravel packing and clay packing 550 mm dia hole for

Supply of clay ball having Size of 25 mm to 50 mm

Seven Hundred Fifty

123 C.M. 60.00 758.51 Eight Rupees and

Fifty One Paise

Supply of gravel of Selected Size 4 mm to 10 mm

Two Thousand Forty

124 C.M. 90.00 2049.29 Nine Rupees and

Twenty Nine Paise

Supply of Cement Six Thousand Three

Hundred Sixty Five

Cement Sealling

Thirteen Thousand

Four Hundred Five

Rupees and Seventy

Lowring of drop line & air line : Lowring 100 mm dia. Dropline and

32 mm GI air line for devlopment of each water bering zone

Thousand Fifty Four

127 coming acros the full depth of tube well for each zone Job 3.00 28054.77

Rupees and Seventy

Lowring of drop line & air line : Lowring 200 mm dia. Dropline

One Hundred Forty

(Blind & Slotted pipe) and 32 mm GI air line for devlopment of

128 R.M. 720.00 149.48 Nine Rupees and

each water bering zone coming acros the full depth of tube well

Forty Eight Paise

Supply and delivery of PVC blind pipe 200 mm dia as per IS: 12818 Seven Hundred

Ninety Six Rupees

Supply and delivery of PVC slotted pipe 200 mm dia as per IS:

Eight Hundred Forty

130 R.M. 300.00 848.40 Eight Rupees and

Supply of (A) M.S. bore clamp -for 300 mm dia. Pipe

Two Thousand Four

Hundred Eighty Five

Rupees and Sixty One

Supply of (B) M.S. bore Plug-for 250 mm dia. Pipe

Two Thousand One

Hundred Seventy

Three Rupees and

Fifty Two Paise

Supply of (C)M.S. bail plug.-for 300 mm dia. Pipe

One Thousand Three

Nine Rupees and

Supply of (D) Steel bent plats -for 300 mm dia. Pipe size-200 X 150 Ninety One Rupees

134 X 6 mm. No. 6.00 91.71 and Seventy One

Development of tube well : Development of tube well zonewise Twenty Two

with 1100 CFM / 300 PSI + Air Compressor up to avalibility of sand Thousand Four

135 free discharge . The air Compressor should run minimum for Six of L.S. 3.00 22427.05 Hundred Twenty

up to avalibility of Sand free discharge . Seven Rupees and

Electrologing test for tub well . Twelve Thousand

136 Job 3.00 12120.00 One Hundred Twenty

Supply of ERW 250 mm dia. Blank pipe IS 3589 (7 mm thick. )

Three Thousand Six

137 R.M. 366.00 3605.70 Hundred Five Rupees

and Seventy Paise

Supply of ERW 250 mm dai. V wire Strainer pipe heavy duty slot Two Thousand Five

size 1.00 mm Hundred Fifty Nine

Rupees and Thirty

0 Supply of bore material for 250 mm dia. Pipe 0.00 0.00 0.00 No Rupees

(A) M.S. bore clamp

Two Thousand Thirty

139 No. 3.00 2037.91 Seven Rupees and

Ninety One Paise

(B) M.S. bore Plug

One Thousand One

Hundred Sixty One

Rupees and Sixty Two

(C)M.S. bail plug. One Thousand Sixty

141 No. 3.00 1065.02 Five Rupees and Two

(D) Steel bent plats Ninety One Rupees

142 No. 3.00 91.71 and Seventy One

Providing Electric moter driven submersible pump set 3PHASE Twenty One

Capacity about 7.5hp having 135 LPM discharge @ 120 mt. head Thousand Nine

143 sutibal for 100 mm dai. Delivery pipe catagery 2.2 No. 3.00 21990.30 Hundred Ninety

Rupees and Thirty

Providing & fixing control penal bord sutibal for above submersible

Eight Thousand Four

pump set-D. O. L. up to 7.5 HP

Hundred Sixty Six

Rupees and Eighty

Providing & fixing PVC insulated round submersible cable 1R x 3 C

One Hundred Eighty

145 Rmt 645.00 180.79 Rupees and Seventy

Manufacture, Supply and Delivery of 80 mm Nominal dia UPVC

Column Pipes including PVC Socket (Coupler), Density of Pipe 1.38 Four Hundred Three

146 to 1.43 Gm per Cm3 , OD : 87.5 TO 88.2MM, Wall Thickness End : Rmt 606.00 403.66 Rupees and Sixty Six

9.8mm to 11.9mm, Berral : 7.3mm to 9.0mm, Length: 3 Mtrs. Paise

Providing and supplying in standard length ISI mark high density

Polyethylene H.D.P.E. Pipes suitable for potable water as per IS

Specification no. 4984/1995 including all local and central taxes, Three Hundred Eighty

147 transportation, freight charges, octroi, inspection charges, loading, Rmt 606.00 380.77 Rupees and Seventy

unloading, conveyance to the dept. stores etc. comp. 110 Seven Paise

dia.10kg/cm2 pressure

Providing, laying and jointing in true line and level 160 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

148 R.M. 30.00 876.90 Seventy Six Rupees

ISI 14735-1999 of approved make for drainage system pipe line,

and Ninety Paise

pipe shall be jointed with each other with rubber lubricant.

Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable water with ring fit

joint including cost of rings, as per IS specification no. 4985/1988

including all local and central taxes, Nine Hundred

149 R.M. 300.00 929.20 Twenty Nine Rupees

transportation,freightcharges,octroi,inspection charges, loading,

unloading, conveyance to the departmental stores and including and Twenty Paise

cost of jointing meterial etc. complete.Test Pressure 10 Kg/cm2

(160mm dia. pipe)

Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable water with ring fit

joint including cost of rings, as per IS specification no. 4985/1988 One Thousand Four

including all local and central taxes, Hundred Forty Nine

transportation,freightcharges,octroi,inspection charges, loading, Rupees and Thirty

unloading, conveyance to the departmental stores and including Five Paise

cost of jointing meterial etc. complete.Test Pressure 10 Kg/cm2

(200mm dia. pipe)

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and

specials of following class and diameter including cost of

Twenty Eight Rupees

conveyance from stores to site of works including cost of labour,

151 R.M. 300.00 28.28 and Twenty Eight

material, cement solvent, giving satisfactory hydraulic testing as

per ISI code (160mm dia. pipe)

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and

specials of following class and diameter including cost of

Thirty Seven Rupees

conveyance from stores to site of works including cost of labour,

152 R.M. 360.00 37.37 and Thirty Seven

material, cement solvent, giving satisfactory hydraulic testing as

per ISI code (200mm dia. pipe)

WOODEN PARTITION

Providing and fixing of full height solid sandwitch partitions (AS

PER DRAWINGS) using 50 x 50 mm aluminium pipe for framing

(minimum grid size of 600 mmx 600mm ), 12mm ply (both sides)of

brand greenply ecotech mr,century sainik mr,srg etc, teak wood

beading patti etc. making of rebates and including all hardware Three Thousand Six

Hundred Sixty Nine

153 items, groove (if shown)50 MM TK , 24 kg density insulation if Sq. Mt 150.00 3669.58

required,with all materials,hardwares,ss or powdercoated screws, Rupees and Fifty

labour, lead and wastage,scaffolding etc. complete. And Finished Eight Paise

with different materials,and complete the work satisfactorily as

per instruction of architect or Engineer-in charge.

ABOVE CEILING PARTITION

Providing and fixing of above ceiling partitions (AS PER

One Thousand Five

DRAWINGS) using 75 mm x 50 mm x 1 mm aluminium pipe for

154 framing,with ghana wood infill etc. including all hardware item, Sq. Mt 150.00 1503.83

Rupees and Eighty

with all material, labour, lead,scaffolding and wastage etc. and

complete the work satisfactorily as per instruction of architect or

Engineer-in charge.

GLASS PARTITION WITH FILMWORK

Providing and fixing of full height glass partitions (AS PER

DRAWINGS) using patch fitting / U-channels, 12mm clear Four Thousand Seven

toughned glass,film work as per drawing including all hardware Hundred Fifty Six

items,silicon,etc with all material, labour,cutouts,edge polish , lead Sq. Mt 150.00

Rupees and Fourteen

and wastage etc. and complete the work satisfactorily as per Paise

instruction of architect or Engineer-in charge.

MIRROR FINISH(5mm thick Looking Mirror)

Providing and fitting of mirror/glass (as per drawing & approved

Two Thousand Five

shade)of brand ais,modiguard,etc on ply panelling / on tile

Hundred Sixty Five

156 cladding including all material, labour and hardware, cutouts, Sq. Mt 90.72 2565.97

Rupees and Ninety

edge polishes,waste of materials and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

WOODEN PANELLING

Providing and making of ply panelling on Wall & columns using

12mm ply, aluminium pipe for (2" x 1") framing(minimum grid size

of 600 mmx 600mm ), Ghana bidding patti (11/2" x 3/4")including One Thousand Seven

all material, labour and hardware complete,including scaffolding Hundred Forty Eight

as per instruction of architect. And Finished with different Sq. Mt 159.57 1748.14

Rupees and Fourteen

materials,polish work as per instructions,and complete the work Paise

satisfactorily as per instruction of architect or Engineer-in charge.

LAMINATE FINISH

Providing and fitting of 1 mm laminate (as per drawing &

selection) of brand greenlam,merinolam,century etc on ply

partition with 25 mm x 20 mm teakwood beading patti design on

top as per drawing,and 3mm x 3mm grooves if shown, all material, One Thousand One

158 adhesives,polish work,labour and hardware, waste of Sq. Mt 191.49 1190.98

materials,polish work as per instructions, complete as per Rupees and Ninety

instruction of architect.[Basic Rate of Laminate : 2000rs./sheet (8' Eight Paise

x 4')] and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.

Supplying and Fixing of Suspended ceiling system components

which includes Single Layer Boarding with 12.5mm thick USG Boral

Standard Plasterboard This includes of USG Boral Thundersteel

Perimeter Channel (0.50mm thick having one flange of 20mm and

another flange of 30mm and a web of 28mm) screw fixed to brick

wall/partition with the help of approved screws at 600mm

centers. Then suspending of USG Boral Thundersteel Intermediate

channel (45mm x 0.90mm thick with two flanges of 15mm each)

from the soffit at 1220mm centers with of USG Boral Thundersteel

Ceiling Angle (25x10mmx0.50mm thick) fixed to RCC Slab with of Nine Hundred Fifty

USG Boral Soffit Cleat (37x27x25x1.6mm thick) and 8mm dia Sq. Mt 1824.45 958.58 Eight Rupees and

40mm long Anchor Fastener @ 600mm Centers, respectively. USG Fifty Eight Paise

Boral Thundersteel Ceiling Section (having web of 51 mm and two

flanges of 27mm each) are then fixed to the of USG Boral

Thundersteel Intermediate channel with the help of connecting

clip (2.6mm Dia) and in perpendicular direction to the USG Boral

Thundersteel intermediate channel at 457mm centers. USG Boral

Thundersteel profiles are rolled with AZ Steel (150 GSM &

MPa Yield Strength) having base metal conforming to IS 513:2016

as per IS 15961:2017/ AS 1397:2001).12.5mm thick USG Boral

Standard Plasterboards (confirming to IS 2095 Part 1) is screw

fixed with 25mm long Drywall screws at 230 mm centers. The

SOLID DOORS FOR WOODEN PARTITION(75 MM TK)

Providing and fixing of 75 mm solid doors (AS PER DRAWINGS)

using 50 x 50 mm aluminium pipe for framing, 12mm ply (both

sides)of brand greenply ecotech mr,century sainik mr,srg etc,

including glass slit as per drawing 50 mm teak wood beading patti

at the framing etc. making of rebates and including all hardware

items,mortise door lock (ENOX EMH-SS-019)with entire set Five Thousand Two

Hundred Forty Nine

160 including cylinder,heavy duty conceal door closer of brand enox Sq. Mt 12.60 5249.88

(ENOX ITS-3870-EN 2-5),ozone,dorma,and groove (if shown) with Rupees and Eighty

all materials, labour, lead and wastage,polish work as per Eight Paise

instructions etc. complete. And Finished with different

materials,and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.

S.S 304 GRADE DUSTBIN

Providing & Supplying of S.S 304 GRADE . Dustbin of brand One Thousand Six

SATYAKI,pigeon etc,having size of 10 In. Diameter & 14" Height Hundred Fifty Six

etc. complete as per selection & directed by the Architect and Rupees and Forty

approved by the Engineer in Charge.(BASIC RATE OF DUSTBIN IS Paise

Providing and fixing of POP Punning and finished by company

approved gypsum, taping, lapi, including scaffolding etc. and Two Hundred

including grooves as shown in drawing And including satin paint Seventy Three

complete with all material, labour with all lead, lift and Rupees and Thirty

transport.and complete the work satisfactorily as per instruction One Paise

of architect or Engineer-in charge.

FIX CHAIR FOR TRAINNING HALL

Providing and fixing of SHABAKHAND CHAIR of brand vista model

make amber , merryfair etc.or as per selection in leather with tilt

up frame on frontal pivot the handle top will e dicasted metal

welded precisely seat will be in complete dicasted frame and

edgebending back will be static as per model covering whole body

high the bottom portion will be connected with fastners to the

floor leather upholstery will be 1200 per metre size width 585*940 Fourteen Thousand

163 with center support of 100 mm sideways as well as back in 90 No. 30.00 14140.00 One Hundred Forty

microns epoxy powder coating,including all Rupees

components,fixing,fastners,groutinng work, material, labour,and

hardwares, waste of materials etc and complete the work

satisfactorily as per instruction of architect or Engineer-in

charge.(basic rate of chair is 13000/-)

(FONTS) : Providing and fixing of BACKLIT FONTS using 10 mm

clear Acrylic cut work and fixing 3mm acrylic on top of brand

Ptglass,astari etc,4mm Acp of 0.5 mm tk for profiling,as per

detail,3M vinyl with 5 years warranty on fading with all laser and

cnc work,including all material,osral led modules including drivers

Twenty Thousand

as required, labour,all required m.s fabrication,100 mm ss studs

164 Sq. Mt 65.82 20200.00 Two Hundred

for mounting and other hardwares, waste of materials,scaffolding,

labour,lead, transport, and installation, etc and complete the work

satisfactorily as per instruction of architect or Engineer-in

charge.(basic height of fonts is 650-750 mm )

Providing and fixing of approved quality roller blinds using phifer

fabric of premium grade, with roller tube, bottom bar leveller

made of extruded aluminium alloy an Idler, Insert Type- Brackets,

PVC chain etc. all complete at all floor and heights as per approved

specification. Roller Tube Control, Clutch, Idler Side by side or

single Roller Tube of extruded Aluminium 38mm inner dia -

41mm outer dia minimum wall thickness of 1.6mm.

Roller blind - roller blind fabric should be made up of 35%

FibreGlass, 65% PVC, it should have specific low emissivity Two Thousand Five

treatment and lead free with Greenguard gold certification. It Hundred Seven

should have 3% to 5% openness, fabric thickness should be 0.43 Sq. Mt 379.14 2507.05

Rupees and Five

mm, mesh weight approx 400 gms/ sqmtr. It should cut UV rays, Paise

with antimicrobial properties preferably with Microban. The fabirc

should be Flame retardant and Lead Free. It should be GreenGuard

certified with Gold Standard for low chemical emissions for indoor

use. (Basic rate of Roller blinds- 85 rs/sq.ft.)including all

accessories, material, labour,installation etc..and complete the

work satisfactorily as per instruction of architect or Engineer-in

STORAGE UNIT WITH LAMINATE FINISH

Providing and Making of Storages (AS PER DRAWINGS) using ply of

brand of brand greenply ecotech mr,century sainik mr,srg

etc,(thickness as specified)/ sag wood and finished by 1 mm

Laminate outside as per selection of brand

greenlam,merinolam,formica or 6mm HDF as per drawing, 1mm tk

laminate (inside),water pu polish (as shown), drawers, shelves etc. Twelve Thousand Six

Hundred Eighty Two

166 with all hardware, nylon leveler foot rubber, handles,hinges, locks Sq. Mt 218.04 12682.38

, magnet and other acessories with all material, Rupees and Thirty

installation,labour, lead and wastage,polish work as per Eight Paise

instructions etc. and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.(Basic rate of Inside

Laminate : 18 rs./sq.ft. & Outside Laminate : 53 rs./sq.ft.)

GANG CHAIR - 3 SEATER

Providing and fixing 3-seater gang sitter with moulded foam, with

Aluminium casting and metal waterfall seats, PU 10mm thick pads

on seat & back (chargeable), P.C. frame & with perforation. as per

Sixteen Thousand Six

architects selection,and complete the work satisfactorily as per

167 No. 18.00 16665.00 Hundred Sixty Five

instruction of architect or Engineer-in charge.BRANDS : COHUMAN

, FEATERLITE , HAYWORTH(BASIC RATE OF GANG CHAIR 14000)

CENTER TABLE (0.60 X 0.60)

Providing and fixing corner table of brand as per architects

168 selection,and complete the work satisfactorily as per instruction of No. 21.00 9090.00

architect or Engineer-in charge.(basic rate per piece is 7000/-) Ninety Rupees

COFFEE TABLE ( 1.20 X 0.60 X 0.45 )

Providing and fixing Coffee table of brand as per architects Fifteen Thousand

169 selection,and complete the work satisfactorily as per instruction of No. 3.00 15150.00 One Hundred Fifty

architect or Engineer-in charge.(basic rate per piece is 15000/-) Rupees

SINGLE BAY TABLE WITH OUT MODESTY PANNEL (1.20 mt x

Providing and fixing of single bay office table of size 1.20 x 0.60 mt

and side storage with drawers and shutters of width 0.45 mt as

per drawings,modesty pannel and instructions provided,using ply

of brand greenply ecotech mr,century sainik mr,srg etc,or

aluminium pipe for framing and finishing it with 1 mm unicore

laminate and 1mm laminate of brand greenlam or selected by the

architect(basic rate of unicore laminate is 3000 per sheet and Thirty Three

170 other 1mm laminate is 2000 per sheet, of size 8'0 x 4'0)including No. 69.00 33330.00

all material, installation,m.s fabrication work with powder Hundred Thirty

coating,labour and hardware,drawer Rupees

channels,hinges,handles,keyboard trolley,cpu trolley,cable

manager,cable trunking system etc waste of materials,polish work

as per instructions etc and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.BRANDS

:,UNIMAPLE,FEATHERLITE,COHUMAN.

"L" TYPE TABLE FOR STAFF (1.80 mt X 0.60 mt )

Providing and fixing of L-TYPE office table of size 1.80 x 0.60 mt

and side storage with drawers and shutters of width 0.60 mt as

per drawings,modesty pannel, and instructions provided,using ply

of brand greenply ecotech mr,century sainik mr,srg etc,or

aluminium pipe for framing and finishing it with 1 mm unicore

laminate and 1mm laminate of brand greenlam or selected by the

architect(basic rate of unicore laminate is 3000 per sheet and

other 1mm laminate is 2000 per sheet, of size 8'0 x 4'0)including Forty Five Thousand

171 all material, installation, m.s fabrication work with powder coating No. 24.00 45450.00 Four Hundred Fifty

with powder coating,labour and hardware,drawer channels, nylon Rupees

leveler foot rubber,hinges,handles,keyboard trolley,cpu

trolley,cable manager,cable trunking system etc,, waste of

materials,polish work as per instructions etc and complete the

work satisfactorily as per instruction of architect or Engineer-in

charge.BRANDS :,UNIMAPLE,FEATHERLITE,COHUMAN.

HIGH BACK CHAIR-TYPE A (ALL CABIN & MEETING HALL)

Providing and fixing of high back office chair, with bifma class IV

gas lift. Zen HB Chair, G.F. Nylon structure with wire mesh on back

high density cushion on seat adjustable arms with PU pads

synchro tilt with multi locking mechanism and seat slider gaslift for

Ten Thousand One

172 height adjustment prong aluminium base with 60 mm castors. as No. 75.00 10100.00

per selection and complete the work satisfactorily as per Hundred Rupees

instruction of architect or Engineer-in charge.Basic rate of chair is

7790/- per chair. BRANDS : Zen,COHUMAN, BRISTOL, COMO.

MID BACK CHAIR-TYPE D( ALL VISITOR , STAFF & MEETING HALL )

Providing and fixing of mid back office chair of good quality Curved

fiber and nylon body with adjustable lumber support, Reinforced

mesh & knee tilting mechanism, 4 way adjustable arms, 5 prong

nylon base as per selection and complete the work satisfactorily as Four Thousand Forty

per instruction of architect or Engineer-in charge.Basic rate of No. 198.00 4040.00

chair is 2975/- per chair BRANDS : BRISTOL, COHUMAN STORM FIX

Providing and fixing of storage rack of angle slotted type of size

Four Thousand Five

2000 x 36”900 x 18” 460 with 6 shelfs(20 swg) ,including all

174 NO. 30.00 4545.00 Hundred Forty Five

hardware,colours,powder coating, channels, etc.and complete the

work satisfactorily as per instruction of architect or Engineer-in

Providing and fixing HPL LOCKERS with locking system of brand

merinolam, Size of Column : 380mm (W) X 450mm

(D) X 1800mm (H) with 100mm Base

Size of Locker : 380mm (W) X 450mm (D)X 300mm (H)

Accessories: Standard – Merino Make Aluminum, Stainless Steel -

304 Grade accessories) as per drawing, HPL as per is 2046 & en-

438 manufactured under high pressure >5 mpa & temperature

>120 cc with bunch of craft paper impregnated with thermo

setting phenolic resin & decorative paper mades of alpha cellulose Four Thousand Five

175 fiber impregnated with thermo setting malamine resin which NO. 45.00 4545.00 Hundred Forty Five

provide superior scratch,abrasing heat,chemical,impact,graffiti & Rupees

moisture resistance along with anti bacterial properties. With

hardware & accessories from besco , all screws,hinges, coat hook

And anti noise rubber pads including all material, labour and

hardware, waste of materials and complete the work satisfactorily

as per instruction of architect or Engineer-in charge. (basic rate of

one locker is 3500)

Providing and supplying stool chairs of stainless steel with height

adjustable seating option for doctors and patients Two Thousand Two

176 per selection and complete the work satisfactorily as per No. 45.00 2222.00 Hundred Twenty Two

instruction of architect or Engineer-in charge.Basic rate of chair is Rupees

2000/- per chair

PAINTING - 24"X24"

Providing and fixing of painting as per selection and complete the

Twenty Two Rupees

177 work satisfactorily as per instruction of architect or Engineer-in No. 18.00 3022.93

and Ninety Three

charge.Basic rate of chair is 3000/- per painting

PAINTING - 36"X36"

Five Thousand Three

Providing and fixing of painting as per selection and complete the

Hundred Eighty Three

178 work satisfactorily as per instruction of architect or Engineer-in No. 9.00 5383.30

Rupees and Thirty

charge.Basic rate of chair is 4500/- per painting

Providing and fixing of 12 to 16 inch dia wallclocks of brand quartz One Thousand Two

or as per selection and complete the work satisfactorily as per Hundred Sixty Two

instruction of architect or Engineer-in charge.(basic rate of wall Rupees and Fifty

clock including gst is rs 750/-per piece) Paise

OUTDOOR FLOOR MAT

Providing and fixing outdoor floor matt of brand comforts or as Three Thousand Five

180 per selection and complete the work satisfactorily as per No. 9.00 3535.00 Hundred Thirty Five

instruction of architect or Engineer-in charge.(basic size of matt is Rupees

INDOOR FLOOR MAT

One Thousand Two

Providing and fixing indoor floor matt of brand my floor or as per

Hundred Sixty Two

181 selection and complete the work satisfactorily as per instruction of No. 27.00 1262.50

Rupees and Fifty

architect or Engineer-in charge.(basic size of matt is 1.20 x

Providing & Supplying of 8 to 10 in dia and 12 to 15 inc ht P.V.C.

Dustbin of brand cello,pigeon etc. complete as per selection & One Thousand Ten

directed by the Architect and approved by the Engineer in Rupees

Charge.(BASIC RATE OF DUSTBIN IS RS 850/- )

Providing & fixing of HANGING LIGHT with box type aluminium

housing ,frosted acrylic at bottom, end caps,hanging strings etc as

per selection with 40 watt Tranquil led strips & driver suggested &

Six Thousand Sixty

183 as directed by EIC/Consultant.and complete the work satisfactorily NOS 27.00 6060.00

as per instruction of architect or Engineer-in charge.( MODEL NO - Rupees

RL024 OF BRAND RANGE LITE OR EQUIVALENT)

DECORATIVE WALL LIGHT

Providing & fixing of DECORATIVE WALL LIGHT as per selection

with lamp & driver suggested & as directed by EIC/Consultant.and

184 complete the work satisfactorily as per instruction of architect or NOS 27.00 3726.90

Twenty Six Rupees

Engineer-in charge.( MODEL NO : RL2012 SQ OF BRAND RANGE

and Ninety Paise

LITE OR EQUIVALENT)

S.S NAME PLATE SMALL

Providing and fixing of 2MM TK S.S 316 GRADE matt finish NAME

PLATE with cut work and fixing 3mm acrylic on top or behind of

brand Ptglass,astari etc,with all laser and cnc work,and wooden

finish back board ,including all material,SCAFFOLDING labour,15 One Thousand Five

mm ss studs for mounting and other hardwares, waste of NOS 42.00 1515.00 Hundred Fifteen

materials etc and complete the work satisfactorily as per Rupees

instruction of architect or Engineer-in charge.( BASIC SIZE OF

NAME PLATE 150 MM X 900 MM)

Providing and fixing of soft board of size 1 x 1.8 Quartet White

Frame Cork Board, Bulletin Display Board, Pin Board, Lightweight

Board for offices with backing of wood with complete installation Two Thousand Four

186 SQMT 66.00 2424.00 Hundred Twenty Four

and mounting with other hardwares, waste of materials etc and

complete the work satisfactorily as per instruction of architect or Rupees

Engineer-in charge.

DOUBLE DOOR SIZE (APRROX SIZE OF 2.17X2.45) WITH FIXED

GLASS TOP (APRROX SIZE OF 2.17 X 0.75 to 1.05)

Providing and fixing of 12 mm tk toughned GLASS DOORS using

Dorma BTS 75 V Glass Door PKG EN 1-4 (Top Patch-1, Bottom

patch-1, Floor Spring-1, Corner Lock-1); Dorma Xl-C 4003 A Patch

fitting for overpanel and sidelight; Dorma Xl-C 4004 A Connector

for overpanel and Sidelight; Dorma Xl-C 4006 Central Connector; Eighty Four Thousand

Dorma Xl-C 4008 Side Connector; Dorma Xl-C 3000 H Type Handle NO 3.00 84083.47 Eighty Three Rupees

400x22 CTC 300 AND AS PER DRAWING including all and Forty Seven Paise

acceessories,locks, material, silicone,labour,installation, Hole &

slote charges etc. and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.

INFORMATION DESK - ENTRANCE LOBBY

Providing and fixing of INFORMATION DESK as per drawings and

instructions provided,using ply of brand greenply ecotech

mr,century sainik mr,srg etc,aluminium pipe for framing and

finishing it with 6 MM CORIAN of brand granium,Tranquil,dupont

and 1 mm unicore laminate of brand greenlam or selected by the One Lac Three

Thousand Eighty Five

188 architect(basic rate of unicore laminate is 3000 per sheet of size No. 3.00 103085.36

8'0 x 4'0)including all material,ms fabrication work ,glass work, Rupees and Thirty Six

installation, labour and hardware, polish work as per Paise

instructions,waste of materials etc and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

CONFERENCE ROOM TABLE

Providing and fixing of CONFERENCE ROOM table including side

storage as per drawings and instructions provided, using ply of

brand greenply ecotech mr, century sainik mr, srg etc., aluminium

pipe for framing and finishing it with 12 or 6 MM CORIAN work

including all cnc work of brand granium,Tranquil,dupont ,and 1mm

unicore laminate and 1mm laminate of brand greenlam or selected Four Lac Thirty Eight

by the architect (basic rate of unicore laminate is 3000 per sheet Thousand Six

189 and other 1mm laminate is 2000 per sheet, of size 8'0 x 4'0) No. 3.00 438639.23 Hundred Thirty Nine

including all material, installation,m.s fabrication work with Rupees and Twenty

powder coating, glass work as per design,labour and hardware, Three Paise

waste of materials,polish work as per instructions etc. and

complete the work satisfactorily as per instruction of Architect or

Engineer-in charge. (APPROX RUNNING LENGTH OF TABLE IS UP

SOFA - 2-SEATER (AUDI)

Providing and fixing 2-seater sofa,as per drawings or selection

using base WHITE ASH WOOD for framing with molded foam,and

high density fom warwick brand rexine(as per architects selection) Twenty Five

in sofa upholstery and ss204 grade corner legs with 5 years Thousand Two

warranty and instructions provided, and ,and complete the work No. 21.00 25250.00

satisfactorily as per instruction of architect or Engineer-in Rupees

charge.(appox lenght of sofa is 4'6'') BASIC RATE 4500/RN FT.

BRANDS : SHEARLING , SEDUS , NATUZZI

SOFA - 3-SEATER(AUDI)

Providing and fixing 3-seater sofa,as per drawings or selection

using base WHITE ASH WOOD for framing with molded foam,and

high density fom warwick brand rexine(as per architects selection)

in sofa upholstery and ss204 grade corner legs with 5 years Thirty Thousand

warranty and instructions provided, and ,and complete the work No. 54.00 30300.00 Three Hundred

satisfactorily as per instruction of architect or Engineer-in Rupees

charge..(appox lenght of sofa is 6'6'') BASIC RATE 4500/RN

FT.BRANDS : SHEARLING , SEDUS , NATUZZI

SOFA - 1-SEATER(BANLAN)

Providing and fixing 1-seater sofa,as per drawings or selection

using base WHITE ASH WOOD for framing with molded foam,and

high density fom warwick brand rexine(as per architects selection) Twenty Seven

in sofa upholstery and ss204 grade corner legs with 5 years Thousand Seven

192 warranty and instructions provided, and ,and complete the work No. 30.00 27775.00

Hundred Seventy Five

satisfactorily as per instruction of architect or Engineer-in Rupees

charge.(appox lenght of sofa is 3'6'') BASIC RATE 7500/RN FT.

BUNK BED (SIZE:78''X36''X65'')

Providing & fixing M.S.Bunk bed Double Deck steel beds for

hostels & barrack. Manufactured from prime quality ERW tabular

frame & CRCA sheet. Overall size : H-1670x L-2000 x D-900mm ,the

main frame to be fabricated using 50 x50 x 4 mm ms hollow

section at four corners,50 x 25 x 3 mm ms framing on peripheral Twelve Thousand

193 sides on top and bottom with 25 x 25 x 1.5 mm framing to be used No. 24.00 12061.30 Sixty One Rupees and

for supporting 12mm ply at bottom and 25 x25 x 1.5 mm ms to be Thirty Paise

used for ladder and other framing As per attached drawing and

Capacity of 2 persons &and completing the work satisfactorily as

per architect or engineer incharge.

SINGLE BED MATTRESS (SIZE:78''X36''X4'')

Providing & Fixing of Single bed Cotton Mattress of size 78" x 36" x Two Thousand Two

194 4" with pillow , as per directed by Architect/Engineer-in charge. No. 48.00 2222.00 Hundred Twenty Two

SINGLE BED BLANKET

Providing & Fixing of Single bed Blanket as per directed by Five Hundred Seventy

195 Architect/Engineer-in charge. No. 48.00 575.70 Five Rupees and

PLANTER WITH REAL PLANTS

Providing and fixing 13 inch dia planter/pots of frp or plastic

including drain tray with real indoor plants as per Two Thousand Five

196 selection,including 3 feet ht plants of brand seasonal dekor or as No. 30.00 2525.00 Hundred Twenty Five

per selection and complete the work satisfactorily as per Rupees

instruction of architect or Engineer-in charge.(BASIC RATE OF POT

Providing and fixing of core cutting upto 50 to 150 mm dia core in

rcc members(beams) or walls for concealing A/C piping or electric

conduting ,carried out using cutter machine.Fillinging of zari up to

Six Hundred Thirty

first coat of plastering,finishing with colour/ putty work ,with all

197 NOS 90.00 631.25 One Rupees and

material, labour, lead,scaffolding and wastage etc and complete

Twenty Five Paise

the work satisfactorily as per instruction of architect or Engineer-in

HD PHOTO & VIDEOGRAPHY & DRONE SHOOT & COFFEE TABLE

Providing & Presenting professional HD photography, videography

& drone shooting for pre-construction, during construction and

Post-construction work and also providing & presenting Technical Fifty Five Thousand

198 details, drawings & Detail of benefits of the project to NOS 3.00 55550.00 Five Hundred Fifty

people/environment in the described picture form with a small Rupees

reel of the entire project.and Preparing Coffee table book of

mimimum 25-30 Pages.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC

/ Metallic/Wooden box, single mounting base frame covered with

Four Hundred Forty

textured/metallic/white front plate modules erected on / in wall /

199 Pt. 185.00 449.36 Nine Rupees and

ceiling as per pipe erected, with necessary Lamp holder/ceiling

Thirty Six Paise

rose / H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Tissino / Modular secondary light point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires, in

below type of pipe to be erected complete with earth continuity

and necessary connection with primary light with accessories

erected on Metal / PVC / wooden box covered with 3 mm thick One Hundred Forty

200 PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. Pt. 282.00 149.79 Nine Rupees and

with necessary Lamp holder / ceiling rose / H.D.Connector as Seventy Nine Paise

directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. lll

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME

step type electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with Six Hundred Twenty

201 Pt. 63.00 629.11 Nine Rupees and

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose / Eleven Paise

H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Cat. III

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated stranded wire of Fifty Eight Rupees

202 Mtr 760.00 58.21 and Twenty One

green colour for earth continuity of following size (A) With

medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm Paise

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated stranded wire of Seventy Seven

203 Mtr 11420.00 77.03 Rupees and Three

green colour for earth continuity of following size (A) With

medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm Paise

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires erected in

below type of pipe with 6A Modular type switches and following

type of accessories erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front Five Hundred Fifty

204 plate modules erected on / in wall / ceiling as per pipe erected. Pt. 15.00 558.92 Eight Rupees and

with necessary batten/angle holder or ceiling rose or Ninety Two Paise

H.D.Connector as directed.(f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate Four Hundred

front plate modules erected on / in wall / ceiling as per pipe Seventy Three

erected with following type of accessories.[I] For 6A Plug and 6 a Pt. 49.00 473.33

Rupees and Thirty

switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb Three Paise

db board.(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe Six Hundred Ninety

206 erected with following type of accessories.[II] For 16A Plug and 16 Pt. 113.00 697.59 Seven Rupees and

amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.(f) with Fifty Nine Paise

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.

207 Pt. 27.00 817.41 Seventeen Rupees

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with

and Forty One Paise

2.5 sq.mm ( green) earthing wire from mcb d b board.(f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

Two Hundred Forty

single mounting base frame covered with textured /metallic/white

208 Pt. 75.00 240.52 Rupees and Fifty Two

front plate modules erected on / in wall / ceiling with following

type accessories Cat. III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive Twenty Two Rupees

209 solution & Clamps with following dia of pipes, in approved manner Mtr 1690.00 22.25 and Twenty Five

as directed.(a)20 mm Paise

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive Thirty Rupees and

solution & Clamps with following dia of pipes, in approved manner Mtr 1420.00 30.82

Eighty Two Paise

as directed.(b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive Fifty One Rupees and

211 solution & Clamps with following dia of pipes, in approved manner Mtr 60.00 51.36

Thirty Six Paise

as directed.(c) 32 mm

Providing and fixing approved make Perforated C type cable tray.

Made from pre- galvanized sheet steel. The cable tray should be

bended as per IS 2062/1079 . with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut - bolt and Four Hundred

212 washers etc. erected on existing support as per Specification and Mtr 30.00 470.76 Seventy Rupees and

as per instruction of engineer in charge..(5) 300 X 50 X 1.5 mm Seventy Six Paise

(3) 150 X 50 X 1.5 mm Thick

213 Mtr 30.00 320.98 Twenty Rupees and

Ninety Eight Paise

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules One Hundred Fifty

214 erected with necessary connections as per site situation directed Ea. 57.00 152.36 Two Rupees and

by Engineer In charge.(3)Two pin RJ-11 Telephone socket with top Thirty Six Paise

[A] For One Gang Cat. III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules One Hundred Fifty

215 erected with necessary connections as per site situation directed Ea. 51.00 152.36 Two Rupees and

by Engineer In charge(8) Computer RJ-45 socket Cat. III Thirty Six Paise

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white front One Thousand Eighty

216 plate,modules erected with necessary connections as directed. 1 Ea. 51.00 1080.18 Rupees and Eighteen

no. 6A/16A universal plug-switch combined.3 nos. 6A Switch 3 Paise

nos. 6A 5 pin Plug .For Modular Type Accessories Cat.III

Supplying & erecting approved make LAN cable of following size in

Forty Three Rupees

217 existing pipe as per direction[C] CAT - 6 Mtr 3660.00 43.65

and Sixty Five Paise

SITC of 24 x 10/100/1000BASE-T ports

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features Fifteen Thousand

L2+ Static Routing Three Hundred

218 Ea. 3.00 15398.22 Ninety Eight Rupees

Optional “standard mode” or “surveillance mode” management

user interface [Approved by and Twenty Two

Competent Authority i.e. not Below the rank of Executive Engineer Paise

SITC of 8 x 10/100/1000BASE-T PoE ports

2 x Gigabit SFP ports

Advanced L2 switching and security features

L2+ Static Routing Eighteen Thousand

219 Optional “standard mode” or “surveillance mode” management Ea. 3.00 18398.26

user interface Ninety Eight Rupees

65W PoE budget and Twenty Six Paise

[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Supplying & erecting approved make Telephone Cable electrolytic

copper conductor PE insulation twisted in two pairs, & wrapped

with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming to C-DOT Seventeen Rupees

220 Mtr 2520.00 17.97 and Ninety Seven

erected in existing pipe. of following size of conductors & nos.of

pairs. With necessary connections.[A] Conductor Size 0.5 mm (a) Paise

Unarmoured (2) Two Pairs

SITC of Digital / PCM / TDM EPABX System having SMT design,

system with flexible universal slots. Inbuilt Auto attendant facility,

Minimum 15 Nos. conference, Analog extension line, Calling GSM,

E&M line, PRI / EI & VOIP program me through Analog telephone

digital key from Ethernet, public address cord, shall have

unrestricted simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of

Service, Quick Dial-Single Digit dialing of any two external number,

Once only ring device, Chairman / Secretary - Do not disturb

Facility, Power Down Mode, Hot Line, Hot Outward Dialing, Day Fifty One Thousand

Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Four Hundred Thirty

Call transfer while Ringing with Voice Guide System, (DISA), Caller Ea. 3.00 51439.81

Nine Rupees and

ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, Eighty One Paise

External Music Port, Call Budgeting, Call Most Calculation

(ASMDR), DID Direct Inverse Dialing, External Music Input, Fax

Homing, Global Directory Printing with following capacities

[[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ][B] No of Extension 24, No of Junctions 9,

Port IP Resource in-built, 4 Port Web base Video Conferencing, No

of expandable ports : 96, Operators Console - 01 Compatible :

Providing and erecting IP Phone with display with all IP system Five Thousand Six

supported [[Approved by Competent Authority i.e. not Below the Hundred Forty Nine

rank of Executive Engineer ] Rupees and Fifteen

Supplying & erecting push button type telephone instrument

having speaker phone Caller ID & hands free dialing system & 30 Five Hundred Sixty

223 memories with display system Single line [[Approved by Ea. 54.00 564.92 Four Rupees and

Competent Authority i.e. not Below the rank of Executive Engineer Ninety Two Paise

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder coated and high U.V.

& corrosion resistance with diffuser with company mark/name

160V to 270V, Power Factor more than 0.95, THD < 15%, CCT

3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED Three Hundred

LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Seventy Two Rupees

Certificates)(NOTE: Below description have shown ranges of Ea. 58.00 372.33

and Thirty Three

Wattage capacity of LED fittings.The Engineer incharge may select Paise

any wattage capacity between the ranges shown.) (A) Tube Light

with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency Four Hundred Twenty

225 > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Ea. 52.00 427.11 Seven Rupees and

description have shown ranges of Wattage capacity of LED Eleven Paise

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20 (ii) 11-15 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency Five Hundred Eighty

226 > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Ea. 3.00 588.88 Eight Rupees and

description have shown ranges of Wattage capacity of LED Eighty Eight Paise

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20 (iii) 16-20 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency Seven Hundred Fifty

227 > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Ea. 3.00 758.36 Eight Rupees and

description have shown ranges of Wattage capacity of LED Thirty Six Paise

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20 (iv) 22-24 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency One Thousand Seven

Hundred Ninety Four

228 > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Ea. 3.00 1794.03

description have shown ranges of Wattage capacity of LED Rupees and Three

fittings.The Engineer incharge may select any wattage capacity Paise

between the ranges shown.)(B) LED Panel Light with provision for

Plane front frame with translucent cover fixed to housing

complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT

K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver Two Thousand One

229 efficiency > 85 % ( fitting required LM-79 & LM-80 Ea. 3.00 2160.37

Certificates)(NOTE: Below description have shown ranges of Rupees and Thirty

Wattage capacity of LED fittings.The Engineer incharge may select Seven Paise

any wattage capacity between the ranges shown.) (I) Adjustable

spot light with COB led having aluminium reflector of following

wattage (iv) 30 Watts Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT

K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver One Thousand Ninety

230 efficiency > 85 % ( fitting required LM-79 & LM-80 Ea. 386.00 1097.31 Seven Rupees and

Certificates)(NOTE: Below description have shown ranges of Thirty One Paise

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (I) Adjustable

spot light with COB led having aluminium reflector of following

wattage (iii) 15 Watts Cat-III

Supplying Installation, Testing and Commissioning of LED

RGB/RGBWW/ RGBNW/ RGBA/RGBW suitable for exterior use

having IP68 rating (as per site requirement). Flexible light strip of

mtr standard length with 12-15 Watt per meter. Luminaire shall be

capable of producing dynamic colour changing light for with

million colours by DMX/Ethernet based control. Minimum System

lumens 450 lumens/meter and System Lumen Efficacy > 30lm/w.

Luminaire light beam spread - 100-110°, The Strip should have IP

68 protection and is offered IP 68 rated connectors to join the LED

Strips in continuity. The luminaire must be offered with Aluminium Eight Thousand Two

channel for mounting the strip lights. The product should be Hundred Ninety

complete with all accessories and Driver. Lifetime of complete Ea. 45.00 8293.13

Three Rupees and

luminaire (LED, Driver, Electrical & control circuitry)shall be at least Thirteen Paise

70:50000 burning hours at 50°C. Luminaire shall be conforming to

BIS (IS 10322) with dully R Number marked. Luminaire shall be

complete with replaceable driver and capable of operating at line

voltage without any separate power supply from 24 V DC, Fixture

shall be suitable to operate at an ambient temperature range of -

10°C to +50°C. The successful bidder shall submit the following

certifications /reports for approval before supply of materials:

product data sheets, LM79. report from NABL accredited lab,

illuminance diagram, polar curve & LM80 report issued by LED

manufacturer & RoHS Compliance along with CE certificate.

Providing & erecting Approved make Power Saving 50 Watt Ceiling

Fan with double ball bearing ISI mark with Condenser 230 volt A.C. One Thousand Nine

50 Hz 1200 mm sweep complete having 3blades with aluminium Hundred Forty Seven

blades with , canopy & 30 cm. down rod erected with Rupees and Twenty

earthing.(Make shall be approved by Engineer in charge)) Five Paise

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and One Hundred Six

233 pierced through a 16 Gauge M.S. box / Heavy Duty PVC box Ea. 63.00 106.99 Rupees and Ninety

complete erected concealed in Ceiling with necessary finishing. Nine Paise

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

One Hundred Six

M.S. Pipe down rod erected duly painted for fan complete with

234 Mtr. 63.00 106.99 Rupees and Ninety

proper insulation without leakage and earthing.

Supplying & erecting approved make low noise decorative exhaust One Thousand Three

fan having square frame ABS body with inbuilt lowers & square Hundred Sixty Six

frame.250mm with 1350 RPM Cat.II Ea. 45.00 1366.07

Rupees and Seven

Providing & erecting water cooler having storage capacity 150 Ltr.

& cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by 15˚C within a hour,

The water cooler should be comprising of hermetically sealed Forty Six Thousand

compressor, fan motor, condensing unit, water tank surrounded Six Hundred Forty

by evaporating, coil, thermostats, relay etc.complete with Ea. 9.00 46648.31

Eight Rupees and

necessary inlet & outlet connection. The body of water cooler will Thirty One Paise

be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter Twenty Four

suitable buster DC pump capacity 80 psi, mention with 40 psi Thousand Three

237 inline type post carbon filter auto low & high pressure switches Ea. 9.00 24394.07 Hundred Ninety Four

with following size of storage tank & LPH capacity & erected as Rupees and Seven

directed [C] 50 Ltr / Hr with 150 psi 2 nos booster pump Paise

SITC of 3LCD Lamp based projector having wxga (1280x800) or

better resolution with minimum white brightness of 3800 lumens

and color brightness of 3800 lumens. The projector should have

minimum 1HDMI,1VGA input. Having contrast ratio of 15000:1 or

more. the projector should have auto vertical key stone correction

of +/- 30 degree and Manual Horizontal of +/-30 degree. the Thirty Three

projector should have optical lens, throw ratio 1.30-1.56:1. Zoom Thousand Eight

238 Factor of 1.2. Lens focus Manual having focal length 16.9mm to Ea. 3.00 33894.91 Hundred Ninety Four

20.28mm. projector should have features like AV mute slide, quick Rupees and Ninety

corner and split function and should support wireless functionality One Paise

with inbuilt wifi or wifi dongle. [Approved by Competent Authority

i.e. not Below the rank of Executive Engineer ]

Supply, Installation Testing & Commissioning 15 Mtr. HDMI

Interface Cable as per the detailed Specifications supports One Thousand Seven

transmission of 4K Signals as per the detailed Specifications Hundred Seventy

Seven Rupees and

Seventy Seven Paise

SITC of universal Projector mounting kit, with necessary grouting,

Six Thousand Eight

fasteners etc. with adjustable height and suitable for all types of

Hundred Forty Seven

240 projectors. [Approved by Competent Authority i.e. not Below the Ea. 3.00 6847.46

Rupees and Forty Six

rank of Executive Engineer ]

SITC of 84 inch Self Lock MW (6 x 4) Instalock Slow Retraction Three Thousand

Screen, Aspect Ratio-4:3 [Approved by Competent Authority i.e. Three Hundred

241 not Below the rank of Executive Engineer ] Ea. 3.00 3378.37 Seventy Eight Rupees

and Thirty Seven

Supplying, installing, testing & commissioning of digital pure sine

wave INVERTOR of approved make single phase 230v complete Twenty Two

with overload relay & necessary protection with following size of Thousand Two

242 batteries, erected with battery terminal wire, copper lead wire to Ea. 3.00 22254.24 Hundred Fifty Four

be connected to load with 10 Amp., 10 kA MCB.[F] 2000 VA with Rupees and Twenty

battery 12V x 2, 150 AH load up to 1250 W Four Paise

Supplying and erecting approved make online Un-interruptible

Power Supply system comprising flat cum-boost charger with IGBT

base rectifier & Inverter & sealed maintenance free SMF batteries.

The charger having operating capacity for input 160-270V AC &

inverter having output 230V,50 Hz Ac with 0.8 load power factor Sixty Nine Thousand

with battery, over/under voltage output with over load & short Three Hundred Thirty

circuit protection equipment. The system housed in CRC sheet Ea. 3.00 69330.51

Rupees and Fifty One

duly powder coated paint with following power backup.with MS Paise

painted batteries stand, 10% Overload capacity for momentary

load. (C) 3 KVA with 1Hr Backup

Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type Eleven Thousand Two

LED Meter :5 LED Arrays Hundred Ninety Eight

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) Ea 9.00 11298.30

Rupees and Thirty

with automatic changeover from AC to Battery operation, duly Paise

protected by wrong Battery Polarity connections. [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer

SITC of Gooseneck microphone

Unidirectional condenser microphone

Phantom powered by amplifier Twelve Thousand

245 On/off sliding switch with priority contact Ea. 6.00 12045.53 Forty Five Rupees

Supplied with fixed 2 m (78 in) cable and lockable DIN connector and Fifty Three Paise

[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Providing and erecting cordless microphone with UHF Diversity

handheld wireless microphone/caller wireless complete with

receiver and transmitter unit,Cardiod ,polar pattern,dynamic

microphone,LCD display for battery and frequency status and

information ,32 preset channels,with compatible groups of 8 Five Thousand One

channels,14 hrs.battery life,frequency response 80Hz to 18KHz.,RF Hundred Thirty Five

sensitivity <1.0 Uv,image rejection > 55 dB,dynamic range >95 dB Ea. 6.00 5135.60

Rupees and Sixty

and receiver having 32 channels,S/N ratio>100 dBA,Dynamic Paise

range>95 dB,distortion<1% [[Approved by Competent Authority

i.e. not Below the rank of Executive Engineer ]

SITC of Ceiling loudspeaker 20W, metal Two Thousand

[Approved by Competent Authority i.e. not Below the rank of Seventy Two Rupees

Executive Engineer ] and Twenty One

providing and erecting Miniature circuit breaker single pole 0.5A to

Two Hundred Sixty

2A system and having breaking capacity 10 KA to be erected in

248 Ea. 87.00 269.62 Nine Rupees and

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Sixty Two Paise

Providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking One Hundred Eleven

249 capacity 10 KA to be erected in existing box. confirming to IS Ea. 414.00 111.27 Rupees and Twenty

8828/1996 with ISI Mark Cat.III Seven Paise

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Seven Hundred Thirty

Load (C Curve) having 10KA breaking capacity & confirms to IS

250 Ea. 27.00 736.10 Six Rupees and Ten

:8828 in existing box having following capacity (c)63 Amp Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Six Hundred Sixty

Load (C Curve) having 10KA breaking capacity & confirms to IS

251 Ea. 24.00 667.63 Seven Rupees and

:8828 in existing box having following capacity (b)40 Amp. Cat.III

Sixty Three Paise

Providing & erecting 415V MCB Four Pole Switch for Lighting Load

Six Hundred Thirty

(B curve) having 10KA breaking capacity & confirms to IS :8828 in

252 Ea. 6.00 637.67 Seven Rupees and

existing box having following capacity (b)40 Amp. Cat.III

Sixty Seven Paise

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Five Hundred Ninety

Load (C Curve) having 10KA breaking capacity & confirms to IS

253 Ea. 12.00 594.87 Four Rupees and

:8828 in existing box having following capacity (a) 6 to 32 Amp.

Eighty Seven Paise

Providing & erecting 415V MCB Four Pole Switch for Lighting Load

Five Hundred Ninety

(B curve) having 10KA breaking capacity & confirms to IS :8828 in

254 Ea. 6.00 594.87 Four Rupees and

existing box having following capacity (a) 6 to 32 Amp. Cat.lll

Eighty Seven Paise

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

255 Ea. 6.00 278.17 Seventy Eight Rupees

8828 in existing box having following capacity(A) 6 to 32 Amp. .

and Seventeen Paise

Providing & erecting 240 V MCB double pole switch for motor &

Two Hundred Ninety

inductive load (C Curve) having 10 KA breaking capacity &

256 Ea. 12.00 299.58 Nine Rupees and Fifty

confirms to IS : 8828 in existing box having following capacity (A)

to 32 Amp. Cat. lll

Providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on 3 phase and

neutral 415V,50Hz. having characteristic of quick action & tripping Three Thousand

257 Ea. 3.00 3038.55 Thirty Eight Rupees

with all advance feature & do not incorporate any electronic

component for following Max. rating erected as directed.(iii) 63 and Fifty Five Paise

Amps. FP Cat. III

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase 240 Two Thousand Six

V,50Hz. having characteristic of quick action & tripping with all Hundred Fifty Three

advance feature & do not incorporate any electronic component. Rupees and Thirty

for following Max. rating erected as directed (iii) 63 Amps. DP Nine Paise

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase 240 Two Thousand Two

V,50Hz. having characteristic of quick action & tripping with all Hundred Thirty Three

advance feature & do not incorporate any electronic component. Rupees and Ninety

for following Max. rating erected as directed (ii) 40Amps. DP Eight Paise

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The Two Thousand Three

Hundred Thirty Eight

260 DBs should be used of same company of MCB to be used) suitable Ea 9.00 2338.41

for (B) three phase incoming and single phase horizontal type Rupees and Forty

outgoing Per phase isolation type (PPI) (b) sheet steel double door One Paise

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The Three Thousand Four

261 DBs should be used of same company of MCB to be used) suitable Ea 6.00 3411.75

for (B) three phase incoming and single phase horizontal type Rupees and Seventy

outgoing Per phase isolation type (PPI) (b) sheet steel double door Five Paise

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The Three Thousand Eight

Hundred Seventy

262 DBs should be used of same company of MCB to be used) suitable Ea 3.00 3873.10

for (B) three phase incoming and single phase horizontal type Three Rupees and

outgoing Per phase isolation type (PPI) (b) sheet steel double door Ten Paise

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The Six Hundred Twenty

263 Ea 6.00 628.25 Eight Rupees and

DBs should be used of same company of MCB to be used) suitable

for (A) single phase incoming and horizontal single phase outgoing Twenty Five Paise

(b) sheet steel double door (IP-43) (i)4 way

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door

(IP54) fitted with insulated copper busbar, isolated neutral link,

earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP- Thirteen Thousand

264 54 suitable for 63/100 AMP TPN MCCB + RCCB as incomer and Ea 3.00 13823.31

three phase outgoing as per following .(The DBs should be used of Twenty Three Rupees

same company of MCB to be used) (C)8 way outgoing and Thirty One Paise

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC One Thousand Four

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The Hundred Ninety One

DBs should be used of same company of MCB to be used) suitable Rupees and Three

for (A) single phase incoming and horizontal single phase outgoing Paise

(b) sheet steel double door (IP-43) (iv)12 way

Supplying & erecting approved make RCCB + MCB (Electro

magnetic type only) working on residual current device having

KA short circuit breaking capacity and 30 mAmp. Sensitivity &

mili sec. tripping time conforming to IS 12640 test knob facility trip One Thousand Eight

Hundred Fourteen

266 free mechanism operating for rated leakage at nominal ten volt, Ea 53.00 1814.58

complete erected including all materials lugs screws etc. Rupees and Fifty

completed. [a] 6A / 10A / 16A / 20A / 25A 2 pole single phase Cat. Eight Paise

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board

necessary IP42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction

of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire / Fourteen Thousand

copperaluminium strips, rubber grommets, rib, bakelite control Nine Hundred One

fuses/MCB for measuring instruments, earth bus & earth bolts, Sq Mtr 36.00 14901.78

Rupees and Seventy

foundation flange - boltsbase Plates, sufficient nos. of hinged Eight Paise

doors, handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating.(The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with

following approved manufacturers with followingsize(B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm depth

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated outdoor type double door cubical panel

board necessary IP-54 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal

268 partitions with necessary accesories , supporting angles/ flats 0.00 0.00 0.00 No Rupees

channel including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction

of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses/MCB for measuring instruments, earth bus

& earth bolts, foundation flange - bolts-base Plates, sufficient nos.

of hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating (The rates excludes Twenty One

the cost of switchgears, bus bars, inter connecting mains & Copper Thousand Two

Aluminium strips, meters, Fuses etc. The dimension shall be Sq Mtr 6.00 21257.08 Hundred Fifty Seven

measured excluding base beams) The panel shall be supplied with Rupees and Eight

following approved manufacturers with following size.. (B) The Paise

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (ii) with 550 mm. Depth

Supplying & erecting approved make Four Pole 415V Motorised

Automatic transfer switch including controller with UV/OV, phase

sequence, single phasing and frequency protection interior for

269 Ea. 3.00 71821.27 Hundred Twenty One

panel mounting with operating mechanism A.C.23A duty

Rupees and Twenty

confirming to IS for (H ) 400A Cat-lll

Supplying and erecting triple pole & neutral 440V/ 500V panel

mounting Aluminium Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for

phase sequence of following current carrying capacity, erected Six Hundred Fifty

with necessary bus bar supports /insulators, main cable socket to Rn.Mtr 18.00 659.07 Nine Rupees and

each busbar,erected in existing cubical panel with necessary Seven Paise

connections.(A) Suitable for 100 Amp. Capacity

(B) Suitable for 200 Amp. Capacity

One Thousand Thirty

271 Rn.Mtr 9.00 1035.68 Five Rupees and Sixty

(C) Suitable for 300 Amp. Capacity

One Thousand Four

Hundred Sixty Seven

Rupees and Ninety

(D) Suitable for 400 Amp. Capacity

Two Thousand Two

273 Rn.Mtr 66.00 2204.03 Hundred Four Rupees

and Three Paise

providing and erecting Approved make Earth fault Relay suitable

to mount with inter connection suitable to following size of

Five Thousand Four

moulded case circuit breaker having CT ratio & MCCB rating as

Hundred Thirteen

274 following along with shunt trip 220V AC. with all internal Ea. 6.00 5413.77

Rupees and Seventy

connections & complete erected in existing M.S.housing.. (3) 250 A

-400 A , CT Ratio 1/400

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

Six Thousand One

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

Hundred Seventy

275 with all internal connections, spreader tinned copper & complete Ea. 3.00 6171.27

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Twenty Seven Paise

(15 NOS 100A MCCB + 7 NOS 63A MCCB)

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with Fixed thermal & magnetic Eight Thousand Fifty

276 release suitable to work on A.C.supply 50 c/s. with all internal Ea. 3.00 8054.32 Four Rupees and

connections, spreader tinned copper & complete erected in Thirty Two Paise

existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. and above at

415 V . having normal current rating 250A. with variable thermal Twenty Thousand

& magnetic release suitable to work on A.C.supply 50 c/s. with all Nine Hundred Forty

internal connections, spreader tinned copper & complete erected Four Rupees and

in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III Sixty Six Paise

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 50 KA and above at

415 V having Normal current rating 400A. with variable Thermal Twenty Five

& magnetic release suitable to work on A.C.supply 50 c/s. With all Thousand Two

278 Ea. 6.00 25228.60 Hundred Twenty

internal connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III Eight Rupees and

Providing and erecting Two way Centre off Four pole MCB Change

Eight Hundred Fifty

Over Switch (IS 13947-3 / IEC 60947-3) in existing box. (a) for

279 Ea. 6.00 851.65 One Rupees and Sixty

Providing and erecting Two way Centre off Double pole MCB Six Hundred Forty

280 Change Over Switch (IS 13947-3 / IEC 60947-3) in existing box.(b) Ea. 3.00 641.95 One Rupees and

for 40 Amp. Cat. lll Ninety Five Paise

Supplying & erecting power contactor ,AC3 duty for time switch

complete erected as per direction Cat III (D) 4 pole 440V 40 Amp. Two Thousand Seven

Hundred Eighty One

Rupees and Seventy

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup

channel day clock with 14 memory programme, suitable to

operate on 240V + 5%, 16A with, floating contacts Minimum Fifteen Thousand

switching setup time 1 minimum & LCD display. Also comprised Eight Hundred Thirty

permanent ON/OFF switching. Programming switches & housed in Ea. 3.00 15834.73

Four Rupees and

fire proof thermoplastic enclosure & transparent cover erected as Seventy Three Paise

required with necessary connection erected as directed.

Providing and erecting following additional parts for panel Eight Hundred

mounting MCCBs (A)Extended operating rotary handle with pad Seventy Three

lock with three position trip,off,on suitable for 25A to 250 A panel Rupees and Five

mounting cat-III Paise

Providing and erecting following additional parts for panel

One Thousand Three

mounting MCCBs (B)Extended operating rotary handle with pad

284 Ea. 6.00 1309.58 Hundred Nine Rupees

lock with three position trip,off,on suitable for 400A to 630 A

and Fifty Eight Paise

panel mounting cat-III

Providing and erecting multifunctional meter suitable for

application of Power monitoring and showing measurement of

following Voltage, Frequency, Apparent energy, Apparent power,

Active and reactive energy, Active and reactive power, Average

voltage Vavg, Peak demand power PM, QM, SM, Demand power P,

Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power

factor and displacement PF (signed, four quadrant), Calculated

neutral current, Active, reactive, apparent energy (signed, four Fourteen Thousand

quadrant), Active power P, P1, P2, P3, Voltage U21, U32, U13, V1, One Hundred Twenty

V2, V3, Phase currents, Average current Iag, Peak demand Ea. 15.00 14122.88

currents, Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, Eighty Eight Paise

[Us] rated supply voltage 40...300 V AC 45...65 Hz, 40...300 V DC,

Network frequency 50 Hz, Type of network 3P, Display type

segments LED, Display colour Red, Messages display capacity

fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

Providing and erecting metallic vitrified danger notice board as per

language suggested by engineer incharge for MEDIUM VOLTAGE Sixty Eight Rupees

installation to be erected as per IS-2551. and Forty Eight Paise

Providing & erecting High Voltage Danger Notice Board sticker as Thirty Four Rupees

287 per language suggested by engineer incharge of standard size-as Ea 6.00 34.24 and Twenty Four

per IS 2551 Paise

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper One Hundred Five

288 conductor FRLS PVC insulated stranded wire of green colour for Mtr 984.00 105.28 Rupees and Twenty

earth continuity of following size(A) with medium class Rigid PVC Eight Paise

pipe and accessories.(a) 2 wire 4 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper Two Hundred Forty

289 conductor FRLS PVC insulated stranded wire of green colour for Mtr 200.00 247.37 Seven Rupees and

earth continuity of following size(A) with medium class Rigid PVC Thirty Seven Paise

pipe and accessories.(h) 4 wire 6 sq. mm

Supplying & erecting Flexible PVC insulated multistrand multicore

1.1 KV grade ISI marked Copper Wires of following Size to be Forty Three Rupees

erected as directed. e) 1.50 Sq.mm 3 core round PVC sheathed and Sixty Five Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

One Thousand Three

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

Hundred Ninety Nine

291 with necessary clamps or in existing trench / pipe of following size Mtr 420.00 1399.45

Rupees and Forty

of cables (J) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

One Thousand One

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

292 with necessary clamps or in existing trench / pipe of following size Mtr 840.00 1160.64

Rupees and Sixty

of cables (I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall Four Hundred Eighty

293 with necessary clamps or in existing trench / pipe of following size Mtr 420.00 483.60 Three Rupees and

of cables (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) Sixty Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with Six Hundred Seventy

294 necessary clamps or in existing trench / pipe at road crossing or Mtr 660.00 672.76 Two Rupees and

floor of following size of cables.(A) 4 core 10 Sq. mm Seventy Six Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on Five Hundred Six

295 wall with necessary clamps or in existing trench / pipe at road Mtr 720.00 506.71 Rupees and Seventy

crossing or floor of following size of cables. (C) 4 core 6 Sq. mm One Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on Three Hundred Sixty

296 wall with necessary clamps or in existing trench / pipe at road Mtr 2580.00 361.21 One Rupees and

crossing or floor of following size of cables. (B) 4 core 4 Sq. mm Twenty One Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with Two Hundred Twelve

297 necessary clamps or in existing trench / pipe at road crossing or Mtr 1140.00 212.27 Rupees and Twenty

floor of following size of cable.(A) 3 core 2.5Sq. Mm Seven Paise

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out Thirty One Rupees

going tails, insulating tape etc for following size of cables.(A) 2 to 4 and Sixty Seven Paise

core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out Thirty Six Rupees and

going tails, insulating tape etc for following size of cables. (B) 2 to Eighty One Paise

4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out Thirty Six Rupees and

going tails, insulating tape etc for following size of cables. (C) 2 to Eighty One Paise

4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated Two Hundred

301 armoured cable complete with out going tails, insulating tape etc Ea. 6.00 279.03 Seventy Nine Rupees

for following size of cables.(I) 3 & 1/2 core 300 Sq. mm and Three Paise

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated Two Hundred Forty

302 armoured cable complete with out going tails, insulating tape etc Ea. 12.00 246.51 Six Rupees and Fifty

for following size of cables. (H) 3 & 1/2 core 240 Sq. mm One Paise

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated

One Hundred Thirty

303 armoured cable complete with out going tails, insulating tape etc Ea. 6.00 130.10

Rupees and Ten Paise

for following size of cables .(D) 3 & 1/2 core 95 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool

Ninety Eight Rupees

304 & connected to switchgear terminals with brass/cadmium plated Ea. 18.00 98.43

and Forty Three Paise

nut bolts in an approved manner.(K) 300 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool

Fifty Nine Rupees and

305 & connected to switchgear terminals with brass/cadmium plated Ea. 6.00 59.92

Ninety Two Paise

nut bolts in an approved manner.(H) 150 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool Eighty Four Rupees

306 & connected to switchgear terminals with brass/cadmium plated Ea. 36.00 84.74 and Seventy Four

nut bolts in an approved manner.(J) 240 Sq.mm. Paise

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool

Forty Four Rupees

307 & connected to switchgear terminals with brass/cadmium plated Ea. 12.00 44.51

and Fifty One Paise

nut bolts in an approved manner. (G) 120 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool Thirty Nine Rupees

308 & connected to switchgear terminals with brass/cadmium plated Ea. 18.00 39.37 and Thirty Seven

nut bolts in an approved manner. (F) 95 Sq.mm. Paise

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool

Nineteen Rupees and

309 & connected to switchgear terminals with brass/cadmium plated Ea. 6.00 19.68

Sixty Eight Paise

nut bolts in an approved manner. (D)35/50 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

Seven Rupees and

310 connected to switchgear terminals with brass/cadmium plated nut Ea. 705.00 7.71

Seventy One Paise

bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

Nine Rupees and

311 connected to switchgear terminals with brass/cadmium plated nut Ea. 144.00 9.41

Forty One Paise

bolts in an approved manner. (B) 10 Sq.mm

Providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays, Ten Rupees and

power switchgears, motor starters & control wiring) with required Twenty Seven Paise

size of copper lugs, nuts and bolts if required.(a) One wire 1.00 sq.

(b) One wire 1.50 sq. mm Fifteen Rupees and

(c) One wire 2.50 sq. mm Twenty Four Rupees

314 Mtr. 90.00 24.83 and Eighty Three

(d) One wire 4.00 sq. mm Thirty Four Rupees

315 Mtr. 432.00 34.24 and Twenty Four

(e) One wire 6.00 sq. mm Fifty Three Rupees

and Seven Paise

(f) One wire 10.00 sq. mm

Eighty Six Rupees and

Forty Five Paise

Supplying and drawing of cable Fire Retardant PVC insulated

copper conductor cable in the existing surface / recessed steel

conduit of following pairs, cores and size including connections Fifty Two Rupees and

and interconnections etc. as required. Twenty One Paise

speaker cable Single pair, 2-core, 1.5 sqmm

Making trench in soft soil of suitable width of 90 cm deep for

laying cable or locating the fault all over the run and back filling Forty Six Rupees and

the same and making the surface as normal ground. Twenty Two Paise

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in Sixty One Rupees and

existing trench for laying of cable. below ground / road surface for Mtr. 780.00 61.63

Sixty Three Paise

enclosing cable (A)50 mm outer dia.

Providing and erecting ISI marked PVC insulated PVC Sheathed

One Hundred Forty

Flat flexible Submersible copper cable approved make of

321 Mtr. 150.00 145.51 Five Rupees and Fifty

following Size. (C) 3 Core x 4 Sq. mm

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm.

Two Hundred Sixty

below ground across the road crossing or on floor with necessary

322 Mtr. 150.00 262.77 Two Rupees and

material in an approved manner and making the ground as per

Seventy Seven Paise

original(E)150 mm dia

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200- 250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover.(approved make OEM has to

submit test certificate) & having back filling compound of (B) Inner Five Thousand Seven

chemical (CCM Compound)- Resistivity:- 0.2 • / meter testing as Hundred Fifty Eight

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Ea. 48.00 5758.71

Rupees and Seventy

Sulphar content:- <2%(C) Back fill Compound :- Earthing One Paise

compound should be capable to retainmoisture for long time

Necessary test report must be submitted.(c) For Electrical

Installation covering Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer System(like Automation,

SCADA) i.e independent (b)For Electrical installation up to 11 KV in

normal soil. Length of Pipe : 2.00 mtrs Back filling Compound :1

no. Bag of 25 Kg

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200- 250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover.(approved make OEM has to

submit test certificate) & having back filling compound of (B) Inner Eight Thousand Six

chemical (CCM Compound)- Resistivity:- 0.2 • / meter testing as Hundred Thirty Four

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Ea. 18.00 8634.64

Rupees and Sixty

Sulphar content:- <2%(C) Back fill Compound :- Earthing Four Paise

compound should be capable to retainmoisture for long time

Necessary test report must be submitted.(c) For Electrical

Installation covering Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer System(like Automation,

SCADA) i.e independent (c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e

independent Earthing in normal soil. Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg

Providing and erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in Three Hundred Sixty

325 specially prepared earth pit complete with necessary 8 SWG earth Ea. 21.00 368.05 Eight Rupees and Five

wire. - to be used for each Street Light Paise

For using salt and charcoal / coke as required for pipe type

326 Ea. 21.00 171.18 Seventy One Rupees

and Eighteen Paise

Providing one bag of 25 Kg. Additional Back Filling Compound Seven Hundred Six

327 (BFC) suitable for safe earthing device. Ea. 12.00 706.14 Rupees and Fourteen

Providing and erecting required size Copper strip for earthing of

H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using

328 Kg 510.00 794.30 Ninety Four Rupees

and Thirty Paise

Providing and erecting required size HOT deep Galvanised iron

strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board,

329 Kg 705.00 77.03 Rupees and Three

Motors etc. using proper clamp.

Providing pair of rubber hand gloves suitable for working on

KV/22 KV supply.

330 Ea 3.00 213.98 Thirteen Rupees and

Ninety Eight Paise

Providing printed instruction chart both in English and Gujarati

One Hundred Twenty

and duly framed with front glasses, for treatment of person

331 Ea 6.00 128.39 Eight Rupees and

suffering from Electric shock

Thirty Nine Paise

providng and erecting Approved make. energy meter 3 phase

Two Thousand Six

wire unbalanced load 500 V.50A / 100A complete erected as

332 Ea 3.00 2610.60 Hundred Ten Rupees

directed with necessary earth wire. Cat. III

and Sixty Paise

providng and erecting Suitable set of CTS for 100A Energy Meter

Two Thousand One

333 Ea 3.00 2105.60 Hundred Five Rupees

and Sixty Paise

Supplying rubber matting of following thickness as per

IS:15652/IEC 61111 (b)4mm (LT PANEL, DG SET) Sq.

334 24.00 1027.12 Twenty Seven Rupees

and Twelve Paise

Supplying and erecting approved make set of indicator lamps of Forty Two Rupees

335 LED type lamp, lens cover, Bakelite holder complete erected with Ea. 131.00 42.79 and Seventy Nine

necessary connections. Paise

Providing & erecting open well horizontal mono block pump set

with cast iron body, complete for three phase submersible motor Fifteen Thousand

having.[C] For 3 HP 3 phase open well horizontal mono block Seven Hundred Six

pump set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head Rupees and Thirty Six

suitable for 50/65 mm dia delivery pipe Cat.II Paise

S.I.T.C. of single phase submersible pump set suitable for 100 mm

size or more dia bore well having motor capacity and discharge as Seventeen Thousand

under with necessary panel box. Lifting and Lowering taken extra. Six Hundred Six

337 (b) Motor rating 1.5 HP (16 stage) pump having capacity of 50 LPM Ea. 3.00 17606.52

Rupees and Fifty Two

at 60 mtr head suitable for 32 mm dia. delivery pipe Cat.II Paise

Supplying and erecting Direct On-line Electronics Starter with 2-

5/4-10/8-14/10-16 Amp. Rating relay (variable current setting)

directly operated in totally insulated elegant enclosure and

Amp. Rating power relay with start - stop button for single phase

operation up to 3 HP as per complete erected on P.W. Block with

following features. One Thousand Six

338 Low voltage cut off below 140 V Ea. 3.00 1602.30 Hundred Two Rupees

High voltage cut off above 280 V and Thirty Paise

Overload protection

Indicating LEDs for motor on lv, hv & overload tripping. [Cat.II]

Supplying and erecting Direct on line starter with 30 Amp.

(resistive @ 230v) power relay and with 2 to 5/ 4 to 10 / 8 to

amp. Range C.T. Operated electronic overload relay in engineering

grade plastic enclosure for 3 ph 415v 50 HZ A.C. motor up to

HP with high voltage protection (above 480 v) and under voltage

protection (below 330 v) current sensing single phasing Two Thousand One

Hundred Sixty Seven

339 protection. Reverse phasing protection, inverse current Ea. 6.00 2167.22

characteristic overload protection with indication for On, OL, Rupees and Twenty

HV,LV SPP in a single unit with feather touch start / stop push Two Paise

button, high temperature with standing Bakelite terminals

complete erected on P.W. Block with necessary connection. [Cat.II]

Supplying & erecting approved make Automatic liquid level

controller 6A.as per instruction of Engineer in charge on site

Two Thousand Three

complete with wiring connection with existing wires , with copper

Hundred Fifty Three

340 conductor from pump to upper and lower tank.(Size Not less than Ea 3.00 2353.82

Rupees and Eighty

1.5 Sq MM) from pump to upper and lower tank with ISI marked

Rigid PVC Pipe.

Supplying Electrically operated siren on single phase 220-250V AC Twenty Eight

50HZ supply , RPM 2800,Horizon/verticle single mount having Thousand Eight

341 sound output level more than 100DB with IP 55 protection . Ea. 3.00 28814.96 Hundred Fourteen

Diametrical audible range of (i)5km Rupees and Ninety

Providing cement concrete foundation &. with plastering for

One Thousand Three

horizontal siren motor mounting stand of size 60 x 60 x 25 cms.

Hundred Twenty Six

342 With foundation nuts & bolts of required size, to be fixed at 4 Ea. 3.00 1326.69

Rupees and Sixty

places with each plate of tower, with necessary hard rubber sheet

packing 1.2cms. thick.

Providing & erecting M.S. Protection roof stand having 3.3 mtr.

height made from M.S. angle iron section of 35 mm x35 mm x5

mm with foundation on each six legs. 6 Nos. legs are supported by

25 mm x 25 mm x 5 mm cross M.S. angles with each other rigidly

fixed with nuts, bolts also fixed horizontally on siren tower. The Eight Thousand Three

main roof & cap made from M.S. sheet of 14 G(2.00 mm) duly Hundred Eighty Eight

welded with standing angles as per drawing. The necessary holes Ea. 3.00 8388.14

Rupees and Fourteen

in the top plates of the main roof shell be provided. The whole Paise

structure duly painted with one coat of red oxide and two coats of

enamelled paint (as per Drawing.)

Supplying & erecting approved make motor control cubical panel

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer, indicating lamps

for R- Y - B phases, overload relay, Automatic water level Eight Thousand

controller, Ammeter, Voltmeter each with two way selector Seven Hundred Nine

switch incoming, wires duly socket crimped, main contactor & Ea. 3.00 8709.11

Rupees and Eleven

overload relay, start - stop push buttons, to be erected on angle Paise

iron frame grouted on wall as directed. The isolator, overload relay

& contactors will be of L & T, Siemens or BCH make only. (B) DOL

Supplying and erecting horizontal / vertical mounting type storage

water heater with copper container housed in M.S./S.S./ABS body

insulated with glass wool/puff complete with heating Twelve Thousand

elements,adjustable thermostats 300C to 850C, indicating lamp, Seven Hundred Fifty

safety valve, fusible plug, etc.complete erected with coach bolts, Three Rupees and

nuts. washers & cementation (E)50 Ltr. with 2 KW. heating Thirty Nine Paise

element Premium Category

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable Fourteen Thousand

346 foundation (Included) as per details given by manufacturer Ea. 21.00 14009.90 Nine Rupees and

considering site requirement. (G) 8 Mtr. Long 70 mm Top X 155 Ninety Paise

mm bottom dia, 3 mm thickness with 260mmX260mmX16mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I. J

Bolts Approx Pole weight 84 kg

Providing and erecting Street Light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of approx. 45cms.length and

suitable for 76.5 mm /80mm / required size of pole top having

sufficient fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable welded Six Hundred Twenty

stays, reducer and with check nuts complete painted with one Ea 21.00 624.83 Four Rupees and

coat of Red oxide / PU base primer and two coats of Aluminium / Eighty Three Paise

PU paint. paint with following nos of arms

[A] Single Arm Bracket 1.5 Mtr

Supplying and erecting B class galvanised iron pipe 32 mm outside

dia 45 cm long duly welded on 20 cm x 20 cm x 3 mm thick M.S. Three Hundred Forty

348 base plate, erected on wall or corner for mounting street light Ea 30.00 342.37 Two Rupees and

luminaire with necessary hardware materials duly painted. Thirty Seven Paise

Supplying & erecting approved make SMC press moulded

composite FRP . loop-in, loopout approx. 2mm thick box complete

with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting

mob & hinged doors as per requirement having locking Eight Hundred Ninety

349 arrangements with mounting clamp with nuts, bolts & washers Ea 36.00 898.83 Eight Rupees and

suitable for erection on pole with cable clamps& earth bolt of Eighty Three Paise

following size of box.(a) 300mm x 200mm x 100mm [deep]

Providing and erecting iron clad cable route marker duly marked

Two Hundred Thirty

with ELE.CABLE of size 23 cm.X 12 cm. Flushed with ground in

350 Ea 21.00 239.66 Nine Rupees and

cement foundation as directed by Engineer in charge.

Sixty Six Paise

Supplying and erecting B class Galvanized iron pipe having smooth

finished bore of the pipe on both ends erected nuts and bolts

Seventy Nine Rupees

351 along the pole / wall shaping the pipe as per site requirement. Mtr. 42.00 179.75

and Seventy Five

Pipe dia as following.(a) 25 mm dia

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 1Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses with company mark/name

engraved or embossed 120 to 300 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K, Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

%.CREE /OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux Four Thousand Nine

Hundred Ninety Six

352 (U.S.A.) make LED used for luminaire. ( fittings required LM-79 & Ea 48.00 4996.93

LM-80 certificates)(NOTE: Below description have shown ranges of Rupees and Ninety

Wattage capacity of LED fittings.The Engineer incharge may select Three Paise

any wattage capacity between the ranges shown.) (A) Street Light

(IP-65), Surge protection - 4KV integral and 10 kv non integral

,Light must have 440VAC line supply protection. It should

withstand 48 hours for 440VAC line supply.(ii) above 48 to

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to Ten Thousand Eight

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 Hundred Seventeen

lumens/watt . LED driver efficiency > 85 %.( fittings required LM- Ea 9.00 10817.27

Rupees and Twenty

79 & LM-80 certificates)(NOTE: Below description have shown Seven Paise

ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.) (B)

Flood Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection.(vii) above

200 to 250 watts Cat-lll

(b) LED Bollard fittings of minimum height 600 mm & dia.100mm

having polycarbonate clear/milky diffuser mounted on 3mm thick

Three Thousand One

aluminium finished powder coated pipe with base plate

354 Ea 45.00 3160.10 Hundred Sixty

160x160mm with erection by M8x75mm fastner with required

Rupees and Ten Paise

RCC foundation.IP65 for 9 to 20 watt ,surge-4kv- cat-III

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup

channel day clock with 14 memory programme, suitable to

operate on 240V + 5%, 16A with, floating contacts Minimum Three Thousand One

switching setup time 1 minimum & LCD display. Also comprised Hundred Sixty Six

permanent ON/OFF switching. Programming switches & housed in Ea 3.00 3166.95

Rupees and Ninety

fire proof thermoplastic enclosure & transparent cover erected as Five Paise

required with necessary connection erected as directed.

Supply of Fibreglass Platform Step (A Type) Ladder - 18 FT having

following specifications : It should have large fully serrated Thirty Three

platform 15” wide 20” deep which locks ladder , Aluminium feet Thousand Eight

356 with thick rubber tread, top rail guard to serve as a railing, two Ea. 3.00 33894.92 Hundred Ninety Four

pairs of gusset support at the bottom step and All gussets are Rupees and Ninety

heavy duty steel. Capacity : 300 lbs. Two Paise

Supplying and erecting, commissioning and testing of Diesel

Generating set confirming to IS: 4722:1968 & BS:5514 having

continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply

comprising of a totally enclosed air/water cooled diesel engine

with multi-cylinders developing suitable BHP not less than

following capacity at 1500 RPM with 10% overload for one hour in

24 hours with standard accessories like fly wheel, lubricating oil

cooler, "A" class governor, heavy duty fuel wheel and lubricating Five Lac Forty One

oil filter, oil bath air filler, lubricating oil pressure gauge, end Thousand Two

357 exhaust manifold, standard set of tools with adjustable spanners, Each 3.00 541291.53 Hundred Ninety One

screw drivers, cylinder head to cover, joint cylinder head to Rupees and Fifty

exhaust, element lube oil filter, 12 / 24 volts electric starting Three Paise

equipment complete with standard heavy duty battery, dynamo,

cut-outs, ammeter, necessary wiring, pressure gauge, starter etc

and heavy duty Residential type exhaust silencer (With DEF

System) and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of

required length, standard wall/floor mounted fuel with level

indicator and piping and drip proof alternator, self excited, self

regulated, screen protected, with excitation system, capable of

delivering the rated system output at 415 volts, 3 phase, 0.8 PF,

Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-

with voltage regulation +/- 5% of rated voltage from no load to

0 full load. Both the engine and alternator fitted on a common 0.00 0.00 0.00 No Rupees

fabricated steel base plate with antivibration mounting engine

and alternator both connected to each other by flexible flange

coupling and with floor/wall mounted control panel box

comprising of voltmeter ammeter, selector switches, ACB /

MCCB / MCB of adequate capacity,

indicator lamps duly wired with HRC fuses. The alternator &

control panel shall be connected with provided suitable capacity