GENERAL

Footpath on Drain slab of 1.8m wide with chequered tiles(Left Side Ch-+0m to 1800m)

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately.

Providing RCC Grade M20 (nominal mix) using 20mm graded HBG metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials and all charges for machine mixing laying concrete, ramming in 15cm layers finishing top surface to the required level curing fo 14 days etc. complete for finished item of workas per S.S. and as directed by the Departmental Authoritie for drain bed and slab.

Providing RCC Grade M20 (nominal mix) using 20mm graded HBG metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials and all charges for machine mixing laying concrete, ramming in 15cm layers finishing top surface to the required level curing fo 14 days etc. complete for finished item of workas per S.S. and as directed by the Departmental Authoritie (With out form work) for drain Walls

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Flooring with Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 400 x 400 mm and thickness 25 mm of any shades set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, complete for finished item of work, .

Painting with Red Oxide Primer Paint - one coat and Synthetic Enamel Paints -Two coats -for new Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.

Electrical Works

Supply, installation Testing and commissioning of Three Phase Automatic Street Light Control system with smart energy meter / CCMS to schedule the timing of lights (Reprogrammed based on astronomical clock or on field or through central control), ON / OFF switch (On field or centrally). CCMS system to capture the energy usage and other parameters at predetermined interval and store data for 30 days, download data in field via mobile app or mobile dash board, system protection against surges, upgrade firmware on field using a communication device via WIFI / GSM and GPRS, MCB Reset mechanism for temporary fault rectification, inbuilt GPS for location identification, emergency on/off, with suitable rating of latching relay, door tamper sensing, instant load on/off functionality to support maintenance activity, low voltage/high voltage trip, overload cutoff and operating voltage 350-450 volts, 50Hz with CRCA power coated enclose of IP55 protection. Single pole C curve breaking capacity 10KA MCB and suitable to control the load 12.KW of three phase with necessary clamping arrangements etc., Makes : Lauritz Knudsen (formerly L&T) / Siemens / Bajaj/KSP/Schnell

FEEDER PILLAR PANEL Supply, fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat.. Fuses shall be provided for Control purposes (All Panels shall be extendable type MCCB MAKE: L&T ( DSINE), ABB(TMAX) INCOMERS Supply and fixing of MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity… with thermal magnetic release panel mounted. 125A 25KA 4Pole MCCB - 1 Nos, Multi function meter with CT 125/5A , class I Out goers: 40A -63A10KA 3P MCB - 6 Nos 32A 10KA 4P MCB - 4 Nos TIMER & CONTACTOR LED Phase Indication lamps, 200A Aluminium busbars of reuqired size. Dual source meter for EB & DB metering

Totat Estimated Cost of Contrct Value In Rs.

Provision for Seignorage Charges @1%

Towards Merit 2% on Seignorage Charges

Towards DMF 30% on Seignorage Charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Provision for CONSULTANCY CHARGES @ 2.5 %

Unforeseen item