DAY TO DAY MAINT SERVICES TO CERTAIN MARRIED ACCN, REPAIR/REPLACEMENT OF SEWAGE LINE, DRAIN, FENCING AND COMPOUND WALL AT ZONE 1, ZONE 1A UNDER GE (S) TEZPUR

Amount

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.Complete all as specified and as diirected.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.Complete all as specified and as diirected.

Taking down of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each Complete all as specified and as diirected.

Taking down of shutters of any description n.exc 1.00 Sqm and each Complete all as specified and as diirected.

Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc.Complete all as specified and as diirected.

Refixing of shutters of any description n. exc 1.00 Sqm each in same opening including of taking down, easing, adjusting and refixing/renewal of builders hardware as required including renewal of unserviceable screws, etc.Complete all as specified and as diirected.

S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement.Complete all as specified and as diirected.

Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work.Complete all as specified and as diirected.

M&L Second class hard-wood in wrought scantlings in timber framed and fixed.Complete all as specified and as diirected.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.Complete all as specified and as diirected.

Supply and fix 35mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately).Complete all as specified and as diirected.

Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately).Complete all as specified and as diirected.

Supply and fix second class hard wood, 30 mm thick, glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided in to squares, with plain chamfered or rounded, mitered and rebated sash bars sizes of members of shutters shall be as specified in SSR part I, Section 8, Clause No 8.24 (b) and fitted to chowkat Complete all as specified and as diirected.

S&F factory made solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube Complete all as specified and as diirected.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC stiles and plain colour PVC sheets for top rail, lock rail bottom rail on either side & as gap insert for top rail & bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet beading & jointed together with solvent cement all as specified and shown on drawing.Complete all as specified and as diirected.

M&L in repairs Prelaminated particle board 18/19 thk, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.Complete all as specified and as diirected.

S&F 100mm Butt hinges medium weight cold rolled mild steel complete all as specified.

S&F 75mm Butt hinges medium weight cold rolled mild steel complete all as specified.

S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long.Complete all as specified and as diirected.

S&F extruded aluminium alloy handels fabricated type, anodised, 100mm long.Complete all as specified and as diirected.

S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.Complete all as specified and as diirected.

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.Complete all as specified and as diirected.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws.Complete all as specified and as diirected.

Supplied and fixed Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., Complete all as specified and as diirected.

Supplied and fixed Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., Complete all as specified and as diirected.

Supply and fix, steel windows with side hung shutless including box type hinges with steel handle and steel peg stay, complete with glazing bars, donetailed or welded Complete all as specified and as diirected.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete Complete all as specified and as diirected.

Supply and fix, steel ventilator with top hung shulter including hinges, steel peg stay, complete all as specified and directed

S & F in repairs 300 mm MS ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed

Dismantling Structural steel work includings door, gates, etc and similar works complete all as directed

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

Supply & Fix framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F Mild steel hold fasts fixed with MS screws, all conforming to Fe410-0.Complete all as specified and as diirected.

M/L PCC 1:3:6 type C1 20mm grade aggregate as in padding, hold fasts block filling, filling of steel chowkhats, coping or similar work Complete all as specified and as diirected.

Hacking out old broken glass any thickness, size, quality or description from wooden / metal frame works, glazed with putty or fixed with beads.Complete all as specified and as diirected.

S&F 4 mm thick frosted/ pin headed glass in ventilator shutters all as specified and directed by Engr-in-Charge

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

Material & Labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L Preparation of new wood surfaces of any description over 10cm width or girth and priming with pink primer and painting with synthetic enamel painting two coats.

Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing serviceable tiles to store and rubbish off the premises.Complete all as specefied and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.Complete all as specefied and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4.Complete all as specefied and directed.

S&F Coloured Glazed ceramic tiles 300x200mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm rendering in Cement mortar 1:4.Complete all as specefied and directed.

S&F Coloured Glazed ceramic tiles 450 x 350 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm rendering in Cement mortar 1:4. Complete all as specefied and directed.

Demolition of cement concrete (un reinforced ) in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as directed.

Material and labour for providing 40 mm thick cement concrete (1:2:4) type B1 using 20mm graded aggregate as in floors finished the surfaces even and smooth without using extra cement. complete all as specified and directed.

M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth without using extra cement as in plinth protections/path and laid fair in alternate bays n including filler joints with sealing compound grade 'A' complete all as specifed and as directed.

Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including fillets and cover fillets.Complete all as specefied and directed.

Dismanting timber scantling under 40 Sqcm in secion In fillests, rails , posts, refters and purlins etc in any position in framed work or unframed work.Complete all as specefied and directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress (Make: E Board Everest or equivalent as approved by GE).Complete all as specefied and directed.

S& F in repairs of 4mm thick E Board decorative type in false in any type of frame work all as sepcified and drected (Make: E Board Everest or equivalent as approved by GE)

M&L 2nd CL HW plain fillets square, rectangular in section clean sawnn sectional area exe 13 sqcm & n.exe 25 sqcm fixed with nails including one coat of black oil.Complete all as specefied and directed.

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.Complete all as specefied and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified.

S&F 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with 'L' type or 'J' type or cranked book bolts. Complete all as specefied and directed.

S&F 0.63mm thick corugated galvanised mild steel sheeting with two corrugation side lap in roof.covering fixed with 'L' or 'J' type hooks in roof with grade of zinc coating 275

Material and labour for 6 mm thick asbestos cement, two piece adjustable serrated ridge for corrugated and semi corrugated sheets fixed with ‘L’ or ‘J’ type or cranked hooks bolts all as specified and directed.

Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and as directed by Engr-in-Charge.

Material and labour for old size fly ash /concrete best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Material and labour for old size fly ash /concrete best quality bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Taking down cement plaster on brick concrete surfaces including racking out joints hacking for key, scrubbing down with, water etc.all as specified and directed

Material and labour for 15 mm thick rendering in cement mortar (1:4) in fair faces of brick works or concrete surfaces mixed with Integral Water Proofing Compound as per manufacturer instructions all as specified and directed. NOTE : The Integral water proofing compound will be measured and paid seprately.all as specified and directed

Supply only integral water proofing compound all as specified..

M&L rendering 10 mm thick in cm (1:6) on fair faces of brick work finished even & fair without using extra cement.all as specified and directed

M&L Three coats of white wash new plastered wall surfaces including preparation of new surfaces complete all as specefied and directed.

M&L Applying two coats of Oil bound distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

All as per item No 69 here in before but 20 mm bore.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,

All as per item No 71 here in before but 20 mm bore.

Supply and fix,as in repair,15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and fix, as in repair, bibtap standard of PTMT any colour screwed, for iron pipe 15mm bore (minimum weight 90 gms) all as specified and directed.

Supply and fix, as in repair,15 mm stop valve of PTMT of any colour high pressure screwed for iron pipe and fixed for 15 mm bore of pipe(minimum weight 90 gms) etc complete all as specified and directed.

S&F in repairs kitchen plate rack made out of stainless steel 1 mm thick sheet with partitions and size of rack 800 x 250 x 900 mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed.

Supply & Fix in repairs hasp and staple of size 100 mm aluminium anodised wire type including bolt to hinges plate and fixed with screws complete all as specifed and directed

Supply & Fix as in repair 20 mm dia CP curtain rod (colour coated) with two Nos of socket (decorative type) complete for doors/window opening all as specified and directed

Taking down existing damaged water closet alongwith complete PCC and lime concrete from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, natural colour with cold cut back adhessive. (iii) Providing lime concrete and cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness.

S & F in repairs floor door stopper aluminium alloy body overall length 140 mm and tonge , anodised with hard drwansteel spring all as specified and directed

Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly all as specified and directed

M & L 15 mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm and applied coat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm all as specified and directed

Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane complete all as specified and as directed.

Supply and fix, as in repairs, sheet glass self/corner shelf assembly consisting of 5.00mm thick sheet glass shelf 12cm wide with cromium plated bracket guard all as specified and directed.

Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) 'P' or 'S' trap white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed

Supply and fix, as in repairs, plastic water closet seat, closed pattern with flat bottom, and cover for water closet pan (padestan pattern) all as specified and directed. ESSCO ECS-WHT-101N

S&F in repair of Towel Rail of 20mm dia, 60cm long between flanges complete all as specified and directed. Make- ESSco or equivalent (Cat no.AEC -1111)

S&F in repair brass choromium plated soap dish complete all as specified and directed.

Supply and fix, as in repair, stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.

M&L for chequered cement concrete tiles of size 300 x 300 x 22 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

Supply and fix, as in repair, vitreous china wash basin, white, flat back size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

Supply and fix, bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement all as specified

Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed.

Demolition and breaking up old broking up CI,AC,SWSG soil waste and vent pipe , up to 150 mm bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge

S & F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floor or fixed in wall 110 mm.all as specified and directed

S & F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or fixed in wall 75 mm.all as specified and directed

S & F PVC (SWR) bends any radius 75 mm bore.all as specified and directed

S & F PVC (SWR) bends any radius,110 mm bore.all as specified and directed

S & F PVC (SWR) junction single,(Single T) equal or unequal of 75 mm dia.all as specified and directed

S & F PVC (SWR) junction single,(Single T) equal or unequal of 100 mm dia.all as specified and directed

Supply and fix, as in repair, Overhead Shower 125 mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore all as specified and direcetd. Essco Cat No Eos-542A

Supply and fix,as in repair, CP 40mm dia waste coupling for stainless steel sink with inlet and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed.

Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.

Supply and fix,as in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.

Supply and fix,as in repair, 40 mm dia PVC 610 mm long waste pipe suitable for Sink complete all as specified and directed.

Supply and fix,as in repairs, 75 mm dia of outlet PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed

Supply and fix, as in repairs, grating round 100mm dia size of PTMT (minimum weight 25 gms) all as specified and directed.

S&F in repair 15mm bore dia brass choromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F In repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specififed and directed

Taking down existing aluminium shutter of area exc 1.0 Sqm but not exc 2.00 Sqm and refixing the same in the same opening after reparing and make functional including replacement of fitting and fixture for proper functioning as required all as specified and as directed.

Supply and fix, as in repairs, Hand Shower (Health Faucet) (Brass chromium plated) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed.

Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified and directed.

Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed.

Supply and fix, as in repair,15 mm dia 450 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

M&L one coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L one coat of white wash on ceiling and cornices including preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L complete removal of existing treatment and appplying two coats of weather coat(Apex) over two primer coats of damp shealth to old plastered walls as per manufacturer instrcution including properly fillings the cracks and apllied by approved applicator complete all as specified and directed.

M&L Applying one coat of Oil bound distemper to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L for applying for preparation of old painted surfaces of wood and woodbase surfaces of any description , not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specefied and directed.

M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces pf any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint all as specefied and directed.

Cleaning of septic tank, including pumping out the water from septic tank, scraping out sludge, organic materilas and removing solid & semi solid sludge to a distance exc. 50 Metre, but not exc 100 mtrs from the starting point and filling into shallows pits n. exc 1.5 Mtrs deep and returning, filling in, and levelling earth and spreading bleaching power around tank all as specified and directed for the following sizes including necessary earth work.Users of Septic Tank (i ) 25 Users

(ii) 50 Users

(iii ) 100 Users

Opening and cleaning of soakage well of 50 users capacity by pumping out foul/dirty water into shallows pits n.exc 1.5 mtr deep and returning, filling in, and levelling earth including closing the soakage well after cleaning with water and spreading bleaching powder

Opening and cleaning of soakage well of 100 users capacity by pumping out foul/dirty water into shallows pits n.exc 1.5 mtr deep and returning, filling in, and levelling earth including closing the soakage well after cleaning with water and spreading bleaching powder

Cleaning of blocked / socked manholes incl removal of sludge/ dirt etc to a place n,exc 50mm incl removing and refixing existing man hole cover slab without damage and any depth of manholes etc complete all as specified

Cleaning of sewage line of any diameter and of any description including manholes by manually or other means, to clear the sludge/blockage inside the sewage line and manholes and will be flushing with water to drain out sludge etc. inside the sewage line from manhole to ease the flow of sewage including removing the sludge and re- fixing the manhole cover all as specified and as directed by Engr-in-Charge.

Cleaning of nahni/floor/gully trap upto first manhole and removal of sludge etc all as pecified and as directed by Engineer-in-Charge.

M&L broken bricks for loose filling with aggregates of gauge 80 to 150mm in soakage pits, soakage wells all as specified and directed by Engineer-in-Charge.

M&L P.C.C (1:3:6) type C2 using 40 mm graded stone aggregate for bed to drain pipes including packing under and hunching against side of pipes after they are laid down and tested complete for 150 mm bore pipe complete all as specified and as directed.

M&L 150 mm internal dia salt glazed stoneware drain pipes , laid in trenches and jointed as specified all as specified and as directed

Demolition of cement Concrete (Reinforced) of any description and in any position not otherwise specifically provided for all as directed.

M&L 35 mm thick precast cement concrete Type B0 1:2:4 ( using 12.5 mm graded aggregate) louvres and jallies including moulding but excluding frame set in CM 1:4

Dismantling fencing post, strut (wood, Steel or RCC) any section, including taking out embbed portion and making good disturbed ground embedded in concrete.

Dismantling chainlink fencing, any thickness or mesh, fixed with steel fillet and nut bolt. N.exc 4KG per Sqm

Excavation in trenches n.exc 1.5m wide and n.exc 1.50m deep and getting out soft/loose soil

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25cm in soils.

Removing excavated material not exc. 50mtrs and depositing where directed at a level not exc. 1.50mtrs above the starting point.

Excavating in post holes(or similar holes) each 0.50cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50m and making good

M&L PCC (1:3:6) Type C-2 using 40mm graded stone aggregate) as in foundation or post holes all as specified.

S & F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

Supply only chain link fencing any size and type

S&F (in repairs)Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and staining and fixing to any type of standard rails strain -ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured.)

S&F 12 mm dia MS bolts purpose made with hexagonal or square head on one end and screwed the other, screwed and fitted with nut and washer, length 4 CM

S&F mild steel round bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clip all as specified & directed by Engineer-in-Charge.

S&F MS TMT bars 6 to 8 mm dia,cut to shape required including cranking bending and binding with and including MS wire annealed not less than 0.9 mm dia.

M&L pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L for Newly plastered surfaces of external wall and applying two coats of apex /weather coat paints over two coats of Asian Paints damp shield or equivalent over a coat of primer etc complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.

M&L for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent

Cutting into existing manhole for connection new drain making good to pipe and rendering cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finish and reforming benching as required for 75 mm to 150mm dia.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

M/S CHUNILAL SHOME

M/S Manjit Singh