Furniture work in Health Centre at T.P.S. 28(Rundh-Vesu),F.P.R/10 in South West ( Athwa) Zone

SR. SOR RATE- 24-25

DESCRIPTION QUANTITY UNIT AMOUNT

Providing & Fixing table (Size:- 1.200m x 0.600m x 0.750mm) with 38mm thick

Commercial Plywood with 1.0mm thick lamination sheet fitting with valsadi

teak woood. Vertical support should be made by Commercial Plywood & make

1 nos. drawers on one side. All Exterior surfaces of the drawer would be

finished in 1mm thick laminate & all internal surfaces would be finished with

1mm thick laminate as approved by architect including lock, drawer channel,

1 handle, keyboard trey, cable manager, Space for CPU with french polish labour 1.00 Nos 17,774.00

work with nescessary hardware etc. completed as per site incharge instruction

and as per details drawing. Commercial Plywood Make- (Echotech, Century,

Green), Laminate Make- (Century, Green, Royal Touch). (Basic rate:- Outer

Laminate-1600 Rs/sqft & Inner Laminate-560 Rs/sqft) (DWG No. ID/02)

As Per Interior Work for Health Centre DTP Scheme 69. FP-18

Storage Unit made out 18mm commercial plywood, 20mm thick shutters

made with 18 mm thick commercail plywood, back side surface of the unit is to

be made with 18mm thick commercial ply the outer surfaces would be finished

using 1mm thick laminate and all internal surfaces would be finished using

1mm thick laminate as approved by architect. Work Table Top Borded and

edged should be made valsadi teak wood borders with french polish. Storage

2 unit as per measurement from shutter side, including all necessary premium 1.00 SM 14,436.00

quality hardware & fittings like screw, buffer, lock, handle, stopper, magnet,

chain etc. completed as per architect’s drawing & Instructed By Site Engineer

(size:- 0.900m x 0.450m x 0.750m) Commercial Plywood Make- (Echotech,

Century, Green), Laminate Make- (Century, Green, Royal Touch). (Mode of

Measurement: For Measurement, Height of Storage * Length of Storage will be

Calculated) (Basic

As Per Interior Workrate:-

HealthLaminate-1600 Rs/sqft69.

Centre DTP Scheme & Inner

FP-18Laminate-560

Check up bed with storage & footrest 38mm thick, made out 18mm

Commercial Plywood, central partition of 18mm. 20mm thick shutters made

with 18 mm thick, back side surface of the unit is to be made with 12 mm thick

, the outer surfaces would be finished using 1mm thick laminate and all internal

surfaces would be finished using 1mm thick laminate as approved by architect.

Top Borded and edged should be made valsadi teak wood borders with french

polish. Storage unit as per measurement from drawer and shutter side,

including all necessary premium quality hardware & fittings like screw,bonding

3 material, lock, drawer channel, handle,magnets, chain etc. completed as per 3.00 Nos 33,198.00

architect’s drawing & Instructed By Site Engineer. (size: 1.800m x 0.750m x

0.750m.) Commercial Plywood Make- (Echotech, Century, Green), Laminate

Make- (Century, Green, Royal Touch). (Basic rate:- Outer Laminate-1600

Rs/sqft & Inner Laminate-560 Rs/sqft) (DWG No. ID/05)

As Per Interior Work for Health Centre DTP Scheme 69. FP-18

Providing & Fixing lab/vaccine table (Size:- 1.800m x 0.800m x 0.750mm) with

38mm thick Commercial Plywood with 1.0mm thick lamination sheet fitting

with valsadi teak wood beading. Vertical support should be made by

Commercial Plywood & make 4 nos. drawers & 2 nos shutter with french

polish labour work with nescessary hardware & fitting lock, handle, channel

set, magnet, chain, foot rest etc. completed as per site incharge instruction and

4 as per details drawing. Commercial Plywood Make- (Echotech, Century, Green), 1.00 Nos 33,554.00

Laminate Make- (Century, Green, Royal Touch). (Basic rate:- Outer Laminate-

1600 Rs/sqft & Inner Laminate-560 Rs/sqft) (DWG No. ID/06)

As Per Interior Work for Health Centre DTP Scheme 69. FP-18

Providing and fixing of MINI-CONFERENCE ROOM table including side storage

as per drawings and instructions

provided,usingplyofbrandgreenplyecotechmr,centurysainik

mr,srgetc.,aluminiumpipeforframingandfinishingitwith12 or 6MMCORIAN work

including all cnc work of brand granium,Tranquil,dupont

,and1mmunicorelaminateand1mm

5 laminateofbrandgreenlamorselectedbythearchitect (basic rateof unicore 1.00 Nos 4,10,203.10

laminate is 3000per sheet andother 1mm laminate is 2000 per sheet, of size 8'0

x 4'0) including all material, installation,m.sfabricationworkwithpowdercoating,

glass work as per design,labour and hardware, waste of

materials,polishworkasper instructionsetc.andcompletethe

worksatisfactorilyasper instructionofArchitectorEngineer-in charge.

(APPROXRUNNINGLENGTHOFTABLE IS UPTO14.5 MT.)

As Per Interior Work for Health Centre DTP Scheme 69. FP-18

SR. SOR RATE- 24-25

DESCRIPTION QUANTITY UNIT AMOUNT

GANG CHAIR - 3 SEATER: Providing and fixing 3-seater gang sitter with

moulded foam, with Aluminium casting and metal waterfall seats, PU 10mm

thick pads on seat & back (chargeable), P.C. frame & with perforation. as per

architects selection,and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.BRANDS : COHUMAN , FEATERLITE

Ref Rate from Valak Health Centre, East Zone-B

GANG CHAIR - 2 SEATER: Providing and fixing 2-seater gang sitter with

moulded foam, with Aluminium casting and metal waterfall seats, PU 10mm

7 thick pads on seat & back (chargeable), P.C. frame & with perforation. as per 3.00 Nos 10,699.15

architects selection,and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.BRANDS : COHUMAN , FEATERLITE

Ref Rate from Valak Health Centre, East Zone-B

Prov. & Fix wooden Notice board with Righting laminate board finish

using 12mm th. Back commercial plywood aprooved make, 01mm th.

SF finish laminate, teakwood framing & necessary hardware materials

etc. inside and liping french polish finish complete in all respects by

engineer in charge complete.

Ref Rate From Renovation & Repairing of Furniture Works in various

Properties of Surat Municipal Corporation in West Zone (Rander).(ITEM RATE

Providing and fixing of approved quality Roller blinds using phifer fabric of

premium grade, with roller tube, bottom bar leveller made of extruded

aluminium alloy an Idler, Insert Type- Brackets, PVC chain etc. all complete at

all floor and heights as per approved specification. Roller Tube Control, Clutch,

Idler Side by side or single Roller Tube of extruded Aluminium 38mm inner dia -

41mm outer dia minimum wall thickness of 1.6mm. Roller blind - roller blind

fabric should be made up of 35% FibreGlass, 65% PVC, it should have specific

low emissivity treatment and lead free with Greenguard gold certification. It

should have 3% to 5% openness, fabric thickness should be 0.43 mm, mesh

weight approx 400 gms/ sqmtr. It should cut UV rays, with antimicrobial

properties preferably with Microban. The fabirc should be Flame retardant and

Lead Free. It should be GreenGuard certified with Gold Standard for low

chemical emissions for indoor use. (Basic rate of Roller blinds-

rs/sq.ft.)including all accessories, material, labour,installation etc..and

Rate from Valaksatisfactorily as per

Health Centre, instruction

East Zone-B of architect or Engineer-in

Providing and fixing Hospital Curtain of 8'-0" height with 1ft Mesh Curtain at

Top with necessary Brackets, Curtain Track with Accessories complete. Curtain

to be as per approved sample. All the work complete as per the detailed

drawing, Make up sample and instruction of Architect/ EIC. Fabric should be

10 Water Repellant, Antifungal/ Antibacterial and Fire Retardant. Curtain Track 84.00 SM 4,338.58

should be bendable, good quality runner for smooth movement of curtains.

Suspension Bracket should be made of powder coated Aluminium Profile and

installed as per site height (incl. Suspending Rods) specifications and finished

and complete the work satisfactorily as per instruction of architect or Engineer-

Ascharge And as per

per Approved "Architecture"

Rates of New ED-1detail,

(Hospital Block) of SMIMER Campus

Acoustical Panel Finish: Providing and fitting of acoustic panels with Standard

size & thickness of 1220*2420*9mm of brand Artois, Smart Pannel, Senses

Akustik only in Gradient Pattern. Panels should have Sound Absorption

coefficient (NRC) 0.84. Formaldehyde emission standards of GB18580-

2001 class E1, it should be a green material with asbestos-free, non-toxic and

tasteless gas under extreme temperature, protecting the ozone layer, non-

irritant and recyclable. acoustic panels have to be Fire-resistant as per China

standard class B1. Good insulation properties, to prevent transmitting the heat

from outdoor to indoor directly as partition or and ceiling, saving 35% of

energy, extending the life of air conditioning.including all acceessories,

material, labour etc. and complete the work satisfactorily as per instruction of

architect or Engineer-in charge And as per " Architecture" detail.

As per Approved Rates of New ED-1 (Hospital Block) of SMIMER Campus

Providing and fixing of storage rack of angle slotted type of size 2000 x36”900 x

18” 460 with 6 shelfs(20 swg) ,including all hardware,colours,powder coating,

channels, etc.and complete the work satisfactorily as per instruction of

architect or Engineerin charge.

Ref Rate from 50 bed hospital, Athwa zone

High Back Executive Chairs for HODs & Conference room: Providing and

Supplying highback office chair of Aluminium dia cast base and armrest,50

density high mould foam in seat and back, multi funtional mechenism, bifma

class IV gas lift and p.a castors. Liven HB Chair, Backrest and headrest shell finish

in high gloss black, Headrest height can be adjusted, Armrest pad finish in polish

finish, Armrest height and width can be adjusted, backrest and seat cushion in

single-stitched semi-aniline artificial leather, Seat shell finish in high gloss black,

Seat depth and height of sitting can be adjusted, Mechanism cover in silver

smooth powder coating. as per selection and complete the work satisfactorily as

per instruction of architect or Engineer-in charge. Brands: Bristol Liven, Como,

As per Approved Rates of SMC HQ

SR. SOR RATE- 24-25

DESCRIPTION QUANTITY UNIT AMOUNT

Mid Back Chairs for Conference Hall Extra: Providing and fixing of midback

office chair of pu rexin in seat and back. Revolving chair with Back full nylon

injected flat back with perforated in 10mm round dia, dual cantilevered arms

with upholstery back dual upholstered, back height adjustable, PU/rubber

double castor as per selection and complete the work satisfactorily as per

instruction of architect or Engineer-in charge. Brands: Bristol Liven, Como,

As per Approved Rates of SMC HQ

Plastic Chairs with Cusioning for Visitors of HODs, Nurse Station, Dr. Duty

Rooms: Providing and sulppying plastic chair with cusining of High-grade

15 percent virgin polymers which ensure its longevity,Ergonomically designed 51.00 Nos 2,139.83

plastic chair for home with a lacquered finish, heavy-duty armrest, back and seat

cushion made up of velvet upholstery and PU material for maximum comfort as

Ref Rate fromand complete

Valak Healththe work East

Centre, satisfactorily

Zone-B as per instruction of architect

PVC Chairs for Visitors of HODs, Nurse Station, Dr. Duty Rooms: Providing and

fixing PVC Arm Chairs having Premium Matt Finish with soft feel texture finish,

16 having Size: 600 mm D * 560 mm W * 885 mm H, as per the Specified Company 20.00 Nos 1,500.00

of HOF, Feather Light, Wipro, Godrej, Neelkamal, Supreme etc.as per selection

and complete the work satisfactorily as per instruction of architect or Engineer-

As per Approved Rates of New ED-1 (Hospital Block) of SMIMER Campus

Patients Stools (Revolving): Providing and fixing of Patient Examination Stools of

M.S Dia Cast Base with Epoxy Powder Coating and SS 316 Seats, Revolving Stools

Fitted with M.S Ring for strength & Foot Rest, Four Legs M.S Tubular

construction as per the Specified company of HOF, Feather light, Wipro, Godrej,

Xylus, TSI etc. or Equivalent as per selection and complete the work satisfactorily

as per instruction of architect & Engineer-in charge. (Size Total Height of Stool

As inches, Seat Diameter

Approved Rates of =New

15 inches, Adjustable

ED-1 (Hospital Height

Block) = 19-23 inches,

of SMIMER Campus Wheel

PVC Dustbin: Providing & Supplying of 8 to 10 in dia and 12 to 15 inc ht P.V.C.

18 Dustbin of brand cello,pigeon etc. complete as per selection & directed by the 16.0 No 855.93

Architect and approved by the Engineer in Charge.

Ref Rate from Valak Health Centre, East Zone-B

Indoor Floor Mat: Providing and fixing indoor floor matt of brand my floor or

as per selection and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.(basic size of matt is 1.20 x 0.60 mt)

Ref Rate from Valak Health Centre, East Zone-B

Decorative theme base designing & painting with all waterproof materials

SMC SOR, PAGE NO.13,IT NO 150 (MR)

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass

21 mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge 10.00 No 833.73

with C.P. brass screws and washers.

SMC SOR, PAGE NO.7 NO

Providing, fixing, fitting S.S. Latter of quality SS 304 or with colour powder

coating incliuding Necessary fixture & Fastaning with scaffolding etc.complete.

As per requirement & Direction of Engineer in Charge.

Ref Rate from 50 bed hospital, south west (Athwa)

Slogan writing on walls with designing,Painting at Place including

necessary surface preparation, cleaning, removal of dust & other foreign

material and back ground priming coat over the surface.

Ref Rate from 50 bed hospital, south west (Athwa)

Providing & fixing S.S.towel rail of 600 mm long approved make

24 including, providing & fixing C.P. brass screws, making holes in walls 2.00 No 1,043.00

SMC Sanitary items SOR, PAGE NO.20 NO

Providing &Fixing Brass doctory BIB cock at varios places at all floor aproved

quality as directed by Eng. Charge

Ref Rate from 50 bed hospital,South west (Athwa)

Providing & fixing M.S.Grills of required pattern to wooden frames of windows

etc. At all floor levels with M.S. flats at required spacing & frame around square

26 or round bars with round headed bolts & round headed bolts and nuts or by 100.00 kg 104.20

screws incl. Priming coat of Red lead paint etc. comp. (A) Plain grill For all

SMC SOR, PAGE NO.05,IT NO

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg

27 20m.m Nominal size)&curing comp. excl. cost of form work in :(a) foundation & 1.00 CM 3,005.76

SMC SOR, PAGE NO.01,IT NO

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J

or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet washer or

28 G.I. limpet washer. filled with white lead complete excluding the cost of purlins, 15.00 SM 727.13

Rafters and Trusses. (1) 0.80 mm thick sheet. (Tata / Jindal or equivalent)

SMC SOR, PAGE NO.09,IT NO

SR. SOR RATE- 24-25

DESCRIPTION QUANTITY UNIT AMOUNT

INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(f) with medium class Rigid PVC pipe and accessories erected concealed in

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of

2 Note:- Maximum up to 6 mtrs length, excess will be 10 Pt. 159.08

(f) with medium class Rigid PVC pipe and accessories erected concealed in

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

(f) with medium class Rigid PVC pipe and accessories erected concealed in

Point wiring for Individual Plug with & earth wire of

4 [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby 16 Pt. 497.37

(f) with medium class Rigid PVC pipe and accessories erected concealed in

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on PVC

/ Metallic/Wooden box covered with appropriate front plate modules erected

5 on / in wall / ceiling as per pipe erected with following type of accessories. 70 Pt. 697.91

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete, Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic/Wooden box, single mounting base

6 frame covered with textured / metallic/white front plate modules erected 15 Pt. 253.46

on / in wall / ceiling with following type accessories, Cat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires erected in below type of

pipe with 6A Modular type switches and following type of

accessories erected on PVC / Metallic/Wooden box, single mounting

7 base frame covered with textured / metallic/white front plate modules 0 Pt. 588.58

erected on / in wall / ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete, Cat. III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame covered with

/ metallic/white front plate , modules erected with necessary connections

as per site situation directed by Engineer In charge.

(1)One No. SP 6 Amp.Cat. III 10 Ea. 151.65

(2) One No 5 pin plug 15 Ea. 151.65

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang, Cat. III 1 Ea. 161.20

[B] For Two Gang, Cat. III 1 Ea. 211.03

(4) TV Co-axial Socket outlet, Cat. III 1 Ea. 161.20

(7) Blank Plate Single, Cat. III 1 Ea. 25.45

(8) Computer RJ-45 socket, Cat. III 15 Ea. 161.20

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. 5 Ea. 499.50

(19) Modular Indicating Call Bell, Cat.III 0 Ea. 329.81

(20) Modular Buzzer, Cat.III 1 Ea. 150.59

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive solution

9 & Clamps with following dia of pipes, in approved manner as directed.

Providing & erecting PVC Corrugated Flexible Conduit with required

nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping)

having double-locking arrangement with grooves, trunking of size not

12.5 mm in height as per IS with accessories of PVC/Resin

polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall /

ceiling of following size .

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth continuity of

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm 850 Mtr. 59.59

SR. SOR RATE- 24-25

DESCRIPTION QUANTITY UNIT AMOUNT

(b) 2 wire 2.5 sq. mm 250 Mtr. 78.78

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on

/ ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm 20 Mtr. 107.06

Providing & Erecting approved make following size of TV Co-axial flexible

cable comprising inner conductor of solid bare copper insulated with Foam

PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids

@ suitable coverage overall sheathed with black PVC insulation.

Providing & erecting Switch board for Computer or electric apparatus

consisting of following items in single board erected on PVC /

Metal/Wooden board concealed/open with 3 mm thick PC (Polycarbonate) /

15 Acrylic sheet erected as directed

1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories, Cat. III 16 Ea. 1081.71

Decorative call bell Ting-tong box type 250 volts

complete erected

L.T. SWITCHGEAR AND DIST. BOARD & L.T. PANEL

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and

DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs should be used of same

17 company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V

18 A.C. system and having breaking capacity 10 KA to be erected in existing box. 0 Ea. 112.11

confirming to IS 8828/1996 with ISI Mark, Cat. III (10 Amp)

Providing & erecting 240 V MCB double pole switch for lighting Load (B

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box

having following capacity (A) 25 Amp. & 10 Amp Cat III

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand capacity

of 10 KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected

as directed (i) 25 Amps.DP, Cat III

(i) 25 Amps. DP, Cat. III 1 Ea. 1969.50

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand capacity

of 10 KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not 0 Ea. 2235.13

incorporate any electronic component. for following Max. rating erected

as directed (i) 40 Amps.FP, Cat III

(ii) 40 Amps. FP, Cat. III 0 Ea. 2637.11

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity & confirms to IS

: 8828 in existing box having following capacity (A) 6 to 32 Amp.

Plastic enclosure fitted with DIN rail suitable for incorporating One /

Plastic enclosure fitted with DIN rail suitable for incorporating Three

Sheets steel powder coated enclosure suitable for incorporating One/Two

Providing and erecting metallic vitrified danger notice board as per

26 language suggested by engineer incharge for MEDIUM VOLTAGE 1 Ea. 69.69

installation to be erected as per IS-2551.

Providing & erecting Medium Voltage Danger Notice Board sticker as per

27 language suggested by engineer incharge of standard size as per IS-2551 1 Ea. 26.26

providng and erecting Approved make single phase electronic energy

meter rating 5A/20A/40A based on ASIC (Application Specific integral

circuit) digital technology with accuracy Class-I, temper proof, free from

effect of external magnetic field with phase, earth, reverse and impulse

indications, 6 digit electro- mechanical counter suitable to work on 120 V

to 300V, 45 - 55 Hz., housed in robust enclosure complete to be erected as

directed with 3 year replacement guarantee. Cat. III

SR. SOR RATE- 24-25

DESCRIPTION QUANTITY UNIT AMOUNT

INDOOR LIGHTING ITEM

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.9,

CCT 3000 K to 6500K,

29 Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 1 Ea. 165.64

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 10 Ea. 373.70

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 0 Ea. 535.30

Supplying and erecting LED lamps with following wattage capacity of

220 to 240 voltage, minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser, mounting suitable for E14 /

E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable

(i) 2 to 3 watts 0 Ea. 69.69

(iii) 10 to 15 watts 6 Ea. 188.87

FAN AND RELEATED ITEM

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C.50 Hz. 1200 mm sweep complete having

31 blades Aluminium body and blade sets having ornamental design shanks, 3 Ea. 2358.35

canopy erected with earthing [ Make shall be approved by Engineer in Charge]

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.

32 Pipe down rod erected duly painted for fan complete with proper 2 Mtr. 108.07

insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to

the RCC bars up to 50mm length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to

cover the fan hook or Fan box.

Providing & erecting fresh Exhaust air fan 250 mm dia with square frame

make of ABS body with louvers, Cat. III

Supplying & erecting single phase approved make industrial exhaust fan

suitable for medium duty ring mounted low noise operation suitable for

medium duty having following dia size and maximum speed in RPM

[E] 450 mm dia 1400 RPM Cat. II

Supplying and erecting approved make oscillating type medium duty

bracket fan with Aluminium Blades A.C. 23OV. 50cy/s, with thermal

overload protection wall mounted with height adjustment and rotary tilting

37 device complete with guard, pull cord for speed and oscillation flexible Core 0 Ea. 3518.84

plug top complete erected with lead wires as directed.

EARTHING SYSTEM

Providing and erecting required size HOT deep Galvanised iron strip

for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using

Providing and erecting Annealed bare Copper wire

Providing and erecting HOT deep Galvanised iron

strip wire 8 to 16 SWG.

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043- 1987 made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of

mm having 200-250 Micron galvanising, connection terminal dia of

41 mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved make OEM

has to submit test certificate including value of earth resistane of

[B] For Electrical installation up to 11 KV located in other than normal soil

i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr 0 Ea. 7095.25

-Back filling Compound :1 no. Bag of 25 Kg. two for body earth and one

for neutral earth

SR. SOR RATE- 24-25

DESCRIPTION QUANTITY UNIT AMOUNT

[C] For Electrical Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA)i.e. independent Earthing located in other than

normal soil i.e. Soft Rock, Marshy Soil etc.. 0 Ea. 10593.89

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

CABLES, WIRE AND TERMINATIONS

Making trench in soft soil of suitable width of 90 cm deep for laying cable or

locating the fault all over the run and back filling the same and making

as normal ground.

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below

ground across the road crossing or on floor with necessary material in

43 an approved manner and making the ground as per original. (F) 100 0 Mtr. 226.24

Providing & laying approved make Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS 14930 II )with necessary connecting

44 accessories of same material at required depth in existing trench for laying 10 Mtr. 62.62

of cable. below ground / road surface for enclosing cable, (A)50 mm outer

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cables.

(A) 4 core 2.5 Sq. mm 0.0 Mtr. 269.67

(B) 4 core 4 Sq. mm 0.0 Mtr. 362.59

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

46 going tails, insulating tape etc for following size of cables.

(A) 2 to 4 core 2.5 / 4 Sq. mm 0 Ea. 33.33

Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

47 switchgear terminals with brass/cadmium plated nut bolts in an approved

Supplying & erecting approved make LAN cable of following size in existing

48 pipe as per direction [C] CAT 0.0 Mtr 45.45

SPLIT AIR-CONDITIONERS

Providing and erecting approved make split air-conditioning unit consisting of

copper condensing unit with fan motor, hermetically sealed rotary compressor

with accessories etc. duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied proper insulated

copper tubing,drain PVC pipes suitable for ( cost includes powder coated Stand,

Eco Friendly green gas charging, 15A plug top & Remote Control) with

necessary core cutting.

For 3 Star Rating of current year

(A) for 1.5 ton capacity 3 Ea. 30930.24

(B) for 2 ton capacity 2 Ea. 38820.36

WATER COOLER AND PURIFIER

Providing and erecting water cooler having storage capacity 80Ltr. & cooling

capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of

the water should drop by 15˚ C within a hour, The water cooler should

be comprising of hermetically sealed compressor, fan motor,

condensing unit, water tank surrounded by evaporating coil, thermostats,

relay etc. complete with necessary inlet & outlet connection. The body of water

cooler will be made from Stainless Steel.

SITC of Water Purifire Eureka Forbs Make AG 200 or

PUMP SETS AND STARTERS

Providing & erecting open well type horizontal mono block pump set

with stainless steel body having following specification

(C) 1 H.P. single phase open well motor pump set suitable for

LPM discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery pipe

Supplying andpanel.

erecting Direct - On - Line Starter with 18 A. rating contactor

and with 3.5 Amp. 18A range directly operated in totally insulated elegant

53 enclosure for single phase operation up to 3 HP as per IS 13947 complete 0 Ea. 2100.80

erected on P.W. Block with necessary connection Cat-lll.

SR. SOR RATE- 24-25

DESCRIPTION QUANTITY UNIT AMOUNT

Supplying & erecting approved make Automatic liquid level controller

6A. with sensor testing as per instruction of Engineer in charge on site

complete with wiring connection with existing wires , with copper

conductor from pump to upper and lower tank.

Add GST 18% Rs.=

Total Estimated Cost Rs.=

Say Net Estimated Amount Rs.=

Adding 5% Contigency Charges cess Rs.=

Adding 2.0% Workcharge & establishment charge Rs.=

Gross Estimated Amount Rs.=

Say Gross Estimated Amount Rs.=